SIShin-Ichi Ito

Shin-Ichi Ito

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Shin-Ichi Ito has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Adjoint‐Based Marker‐In‐Cell Data Assimilation for Constraining Thermal and Flow Processes From Lagrangian Particle Records

    by Atsushi Nakao, Tatsu Kuwatani, Shin‐Ichi Ito, Hiromichi Nagao

    Geophysical problems often involve Lagrangian particles that follow surrounding flows and record information about the system, such as the pressure and temperature path recorded in metamorphic rocks. These Lagrangian particles can be useful for constraining unknown parameters, such as their sources and the thermal and flow processes of the surrounding fluid. To use information about Lagrangian particles to constrain unknown parameters about the surrounding fluid in an inverse manner, we have developed a 4D‐Var (four‐dimensional variational) data assimilation for thermal convection in a particle‐grid coupled system. Here we consider particles advected in a thermally convecting, highly viscous fluid that mimics geochemical tracers in the Earth's mantle, and estimate time series of thermal and velocity fields only from the particle records, focusing on their high traceability in the laminar flow. We present preliminary 4D‐Var results using a sufficient amount of synthetic particle position and velocity data. The 4D‐Var run achieves a 60‐Myr time reversal of thermal convection at a horizontal wavelength of 6,000 km, without using any temperature data. For complex convection patterns, the cost function tends not to decrease well, likely indicating that the method is successful when the time reversal is much smaller than the mixing time scale, over which information about the initial particle arrangement is lost. Our framework has the potential to constrain thermal, flow, and mixing processes not only in the Earth's mantle but also in any other laminar flow containing Lagrangian particles that record useful information.


  • Open Access

    Adjoint-based data assimilation for reconstruction of thermal convection in a highly viscous fluid from surface velocity and temperature snapshots

    by Atsushi Nakao, Tatsu Kuwatani, Shin-Ichi Ito, Hiromichi Nagao

    SUMMARY: It is a general problem in geoscience to estimate the time-series of velocity and temperature fields for a fluid based on limited observations, such as the flow velocity at the fluid surface and/or a temperature snapshot after flow. In this study, an adjoint-based data assimilation method (also known as 4-D variational data assimilation) was used to reconstruct the thermal convection in a highly viscous fluid (e.g. Earth’s mantle) to investigate which observations constrain the thermal convection and how accurately the convection can be reconstructed for different wavelengths. The data assimilated to the adjoint-based model were generated synthetically from forward models with convecting cells of different length-scales. Based on the surface velocity and temperature snapshot, our simulations successfully reconstructed thermal convection over 50 Myr in the case that the wavelength of the convective cells is sufficiently large. We obtained two main results from this parametric study. (1) When we only considered instantaneous thermal structure fitting in the cost function, the convection reconstruction tended to fail. However, there are some cases where the laminar thermal convection can be reconstructed by assimilating only the velocity along the fluid surface. (2) There is a limit to the reconstruction of thermal convection in the case that the convecting cells are small (∼1000 km for a 50 Myr reconstruction). We propose that (1) is related to the balance of forces due to the thermal buoyancy and viscous stress around the thermal anomalies and (2) is related to how information is preserved (i.e. how the previous thermal structure is maintained in the observable state throughout the convection process). The results enable the use of geological records to estimate time-series of velocity and temperature in Earth’s deep interior, even though the records may only contain information from shallow parts of Earth.


  • Observation site selection for physical model parameter estimation towards process-driven seismic wavefield reconstruction

    by K Nakai, T Nagata, K Yamada, Y Saito, T Nonomura, M Kano, S Ito, H Nagao

    SUMMARY: The ‘big’ seismic data not only acquired by seismometers but also acquired by vibrometers installed in buildings and infrastructure and accelerometers installed in smartphones will be certainly utilized for seismic research in the near future. Since it is impractical to utilize all the seismic big data in terms of the computational cost, methods which can select observation sites depending on the purpose are indispensable. We propose an observation site selection method for the accurate reconstruction of the seismic wavefield by process-driven approaches. The proposed method selects observation sites suitable for accurately estimating physical model parameters such as subsurface structures and source information to be input into a numerical simulation of the seismic wavefield. The seismic wavefield is reconstructed by the numerical simulation using the parameters estimated based on the observed signals at only observation sites selected by the proposed method. The observation site selection in the proposed method is based on the sensitivity of each observation site candidate to the physical model parameters; the matrix corresponding to the sensitivity is constructed by approximately calculating the derivatives based on the simulations, and then, observation sites are selected by evaluating the quantity of the sensitivity matrix based on the D-optimality criterion proposed in the optimal design of experiments. In this study, physical knowledge on the sensitivity to the parameters such as seismic velocity, layer thickness, and hypocentre location was obtained by investigating the characteristics of the sensitivity matrix. Furthermore, the effectiveness of the proposed method was shown by verifying the accuracy of seismic wavefield reconstruction using the observation sites selected by the proposed method.


  • Seismic wavefield reconstruction based on compressed sensing using data-driven reduced-order model

    by T Nagata, K Nakai, K Yamada, Y Saito, T Nonomura, M Kano, S Ito, H Nagao

    SUMMARY: Reconstruction of the distribution of ground motion due to an earthquake is one of the key technologies for the prediction of seismic damage to infrastructure. Particularly, the immediate reconstruction of the spatially continuous wavefield is valuable for decision-making of disaster response decisions in the initial phase. For a fast and accurate reconstruction, utilization of prior information is essential. In fluid mechanics, full-state recovery, which recovers the full state from sparse observation using a data-driven model reduced-order model, is actively used. In this study, the framework developed in the field of fluid mechanics is applied to seismic wavefield reconstruction. A seismic wavefield reconstruction framework based on compressed sensing using the data-driven reduced-order model (ROM) is proposed and its characteristics are investigated through numerical experiments. The data-driven ROM is generated from the data set of the wavefield using the singular value decomposition. The spatially continuous seismic wavefield is reconstructed from the sparse and discrete observation and the data-driven ROM. The observation sites used for reconstruction are effectively selected by the sensor optimization method for linear inverse problems based on a greedy algorithm. The proposed framework was applied to simulation data of theoretical waveform with the subsurface structure of the horizontally stratified three layers. The validity of the proposed method was confirmed by the reconstruction based on the noise-free observation. Since the ROM of the wavefield is used as prior information, the reconstruction error is reduced to an approximately lower error bound of the present framework, even though the number of sensors used for reconstruction is limited and randomly selected. In addition, the reconstruction error obtained by the proposed framework is much smaller than that obtained by the Gaussian process regression. For the numerical experiment with noise-contaminated observation, the reconstructed wavefield is degraded due to the observation noise, but the reconstruction error obtained by the present framework with all available observation sites is close to a lower error bound, even though the reconstructed wavefield using the Gaussian process regression is fully collapsed. Although the reconstruction error is larger than that obtained using all observation sites, the number of observation sites used for reconstruction can be reduced while minimizing the deterioration and scatter of the reconstructed data by combining it with the sensor optimization method. Hence, a better and more stable reconstruction of the wavefield than randomly selected observation sites can be realized, even if the reconstruction is carried out with a smaller number of observations with observation noise, by combining it with the sensor optimization method.


  • Open Access

    Adjoint-based uncertainty quantification for inhomogeneous friction on a slow-slipping fault

    by Shin-Ichi Ito, Masayuki Kano, Hiromichi Nagao

    SUMMARY: Long-term slow-slip events (LSSEs) usually occur on a fault existing at the deep, shallow parts of subducting plates and substantially relate to adjacent megathrust fault motions. The dynamics of the LSSE largely depend on the inhomogeneity of friction that occurs between the fault interfaces. Thus, it is crucial to estimate the spatial-dependent frictional features from the observations of the slip motion and subsequently identify essential parts that contribute to the principal slip motion by quantifying uncertainties involved in the estimates. Although quantifying the uncertainties of the frictional feature fields in high resolution is necessary to solve the task, conventional techniques of quantifying slow earthquake frictional features have not yet achieved such uncertainty quantification (UQ) due to the complexity of LSSE models such as the large dimensionality. We, therefore, propose a method of UQ for spatially inhomogeneous frictional features from slip motion based on a 4-D variational data assimilation technique using a second-order adjoint method. The proposed method enables us to conduct an accurate UQ even when the dimensionality is large. By combining a fault motion model that mimics slow-slip motion on an LSSE fault–megathrust fault complex in southwestern Japan and the data assimilation technique, we successfully quantified the spatial distribution of the uncertainty of the frictional features in high-resolution. The evaluated spatial distribution in high-resolution reveals the correlation between the dynamics of the slow-slip motion and the important components of the frictional features, which is a valuable information for designing observation systems. Findings from this study are expected to advance the theoretical foundation of applied seismic motion prediction techniques using slow-slip frictional features as stress metres for megaquakes, as well as to improve the understanding of the relationship between the slow-slip motion and frictional parameters of a fault.


  • Open Access

    Bayesian Modeling of the Equation of State for Liquid Iron in Earth's Outer Core

    by T. Matsumura, Y. Kuwayama, K. Ueki, T. Kuwatani, Y. Ando, K. Nagata, S. Ito, H. Nagao

    We use Bayesian modeling of the equation of state (EoS) to constrain the density (ρ) and P wave velocity (VP) of liquid iron under conditions of Earth's outer core. Experiments at such high pressures (P) and temperatures (T) are technically challenging, so there are few data available to use in parameter optimization of the EoS. Our Bayesian inference modeling successfully estimates the posterior probability distribution of the parameters and unobserved data by using the Hamiltonian Monte Carlo method. These posterior probability distributions allow calculation of P‐ρ and P‐VP profiles of liquid iron along the adiabatic P‐T profile together with the associated credible intervals. Assuming that the temperature at the core‐mantle boundary (CMB) is 3,500–4,200 K, the P‐ρ and P‐VP profiles show deviations of ρ and VP from the preliminary reference Earth model of about 8–11% and −3% to −5%, respectively. Deviations of the 95% credible intervals of the P‐ρ profile for the CMB and the inner core boundary are 6.9–9.7% and 6.5–9.8%, respectively. Equivalent deviations of the P‐VP profile are −4.8% to −1.5% and −6.0% to −2.3%, respectively. Bayesian modeling of the EoS enables integration of small data sets that include unobserved data and evaluation of uncertainty ranges of physical properties, such as ρ and VP, which are essential for comparison with seismological properties of the core.


  • Open Access

    Phase prediction method for pattern formation in time-dependent Ginzburg-Landau dynamics for kinetic Ising model without a priori assumptions of domain patterns

    by Ryoji Anzaki, Shin-Ichi Ito, Hiromichi Nagao, Masaichiro Mizumaki, Masato Okada, Ichiro Akai

    We propose a phase prediction method for pattern formation in a two-dimensional kinetic Ising model with dipole-dipole interactions under the time-dependent Ginzburg-Landau dynamics. Considering the effects of the material thickness by assuming uniformness along the magnetization axis, the model corresponds to thin magnetic materials with long-range repulsive interactions. We formulate a theoretical basis to understand the effects of the material parameters on the formation of the magnetic domain patterns in terms of the equilibrium equations governing the balance between the linear and nonlinear forces in the equilibrium state. Further, we develop a method for predicting the phase in the equilibrium state achieved after the dynamical evolution of a system with given initial parameters. The analytically hard third-order term is approximated using the restricted phase-space approximation [Anzaki et al., Ann. Phys. (NY) 353, 107 (2015)] for the ϕ4 models. Although the proposed method does not have perfect concordance with the actual numerical results, it has no arbitrary parameters and functions to tune the prediction. In other words, it is a method with no a priori assumptions of the domain patterns.


  • Open Access

    Adjoint-based exact Hessian computation

    by Shin-Ichi Ito, Takeru Matsuda, Yuto Miyatake

    We consider a scalar function depending on a numerical solution of an initial value problem, and its second-derivative (Hessian) matrix for the initial value. The need to extract the information of the Hessian or to solve a linear system having the Hessian as a coefficient matrix arises in many research fields such as optimization, Bayesian estimation, and uncertainty quantification. From the perspective of memory efficiency, these tasks often employ a Krylov subspace method that does not need to hold the Hessian matrix explicitly and only requires computing the multiplication of the Hessian and a given vector. One of the ways to obtain an approximation of such Hessian-vector multiplication is to integrate the so-called second-order adjoint system numerically. However, the error in the approximation could be significant even if the numerical integration to the second-order adjoint system is sufficiently accurate. This paper presents a novel algorithm that computes the intended Hessian-vector multiplication exactly and efficiently. For this aim, we give a new concise derivation of the second-order adjoint system and show that the intended multiplication can be computed exactly by applying a particular numerical method to the second-order adjoint system. In the discussion, symplectic partitioned Runge–Kutta methods play an essential role.


  • Open Access

    Adjoint-based exact Hessian computation

    by Shin-Ichi Ito, Takeru Matsuda, Yuto Miyatake

    We consider a scalar function depending on a numerical solution of an initial value problem, and its second-derivative (Hessian) matrix for the initial value. The need to extract the information of the Hessian or to solve a linear system having the Hessian as a coefficient matrix arises in many research fields such as optimization, Bayesian estimation, and uncertainty quantification. From the perspective of memory efficiency, these tasks often employ a Krylov subspace method that does not need to hold the Hessian matrix explicitly and only requires computing the multiplication of the Hessian and a given vector. One of the ways to obtain an approximation of such Hessian-vector multiplication is to integrate the so-called second-order adjoint system numerically. However, the error in the approximation could be significant even if the numerical integration to the second-order adjoint system is sufficiently accurate. This paper presents a novel algorithm that computes the intended Hessian-vector multiplication exactly and efficiently. For this aim, we give a new concise derivation of the second-order adjoint system and show that the intended multiplication can be computed exactly by applying a particular numerical method to the second-order adjoint system. In the discussion, symplectic partitioned Runge--Kutta methods play an essential role.