Karol Kostur
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Karol Kostur has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Ján Kačur
Institute of Control and Informatization of Production Processes, Faculty of Mining, Ecology, Process Control and Geotechnologies (BERG), Technical University of Košice, Němcovej 3, 042 00 Košice, Slovakia
9 shared publications - Marek Laciak
Institute of Control and Informatization of Production Processes, Faculty of Mining, Ecology, Process Control and Geotechnologies (BERG), Technical University of Košice, Němcovej 3, 042 00 Košice, Slovakia
5 shared publications Milan Durdán
3 shared publications- Patrik Flegner
Institute of Control and Informatization of Production Processes, Faculty of Mining, Ecology, Process Control and Geotechnologies (BERG), Technical University of Košice, Němcovej 3, 042 00 Košice, Slovakia
3 shared publications - Milan Durdán
Institute of Control and Informatization of Production Processes, Faculty of Mining, Ecology, Process Control and Geotechnologies (BERG), Technical University of Košice, Němcovej 3, 042 00 Košice, Slovakia
2 shared publications Frantisek Krepelka
Institute of Geotechnics, Slovak Academy of Sciences, Košice, Slovak Republic
1 shared publication
Latest Publications
- 1 December 2019
- Published by Elsevier in Measurement
- Vol. 147
Evaluation of synthetic gas harmful effects created at the underground coal gasification process realized in laboratory conditions
- 1 December 2019
- Published by Elsevier in Measurement
- Vol. 147
Evaluation of synthetic gas harmful effects created at the underground coal gasification process realized in laboratory conditions
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Control System Design for a Walking beam furnace
Walking beam furnaces belong to industry furnace group with a high energy consumption before rolling processes. The main goal of these furnaces is to ensure a uniform billets heating so that rolling is successful at the required performance and quality in the rolling mill. The main reason of reduced quality heating billet is the non-uniform distribution of temperature over the charge length. In proposed paper will be analysed this problem by mathematical model and solved by suitable decentralized control system. The Auto Regressive-Moving-Average method (ARMAX) model has been used for identification of the fuel stream and controllers were tuned with modified Ziegler-Nichols method for more regulation zones.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Control System Design for a Walking beam furnace
Walking beam furnaces belong to industry furnace group with a high energy consumption before rolling processes. The main goal of these furnaces is to ensure a uniform billets heating so that rolling is successful at the required performance and quality in the rolling mill. The main reason of reduced quality heating billet is the non-uniform distribution of temperature over the charge length. In proposed paper will be analysed this problem by mathematical model and solved by suitable decentralized control system. The Auto Regressive-Moving-Average method (ARMAX) model has been used for identification of the fuel stream and controllers were tuned with modified Ziegler-Nichols method for more regulation zones.
- Open Access
- 10 May 2018
- Published by MDPI AG in Sustainability
- Vol. 10 (5) , 1512
Some Influences of Underground Coal Gasification on the Environment
Increasing energy costs and energy demand have renewed global interest in clean coal technologies. Underground Coal Gasification (UCG) is an industrial process that converts coal into product gas. UCG is a promising technology with a lot of health, safety and environmental advantages over conventional mining techniques. UCG carries risks to human health, agriculture and the environment. This article briefly analyzes the advantages and negative environmental impacts of UCG. It describes experimental objects, mathematical models as tools for simulation cases and it used coal from UCG experiments in Cigel, Barbara and Wieczorek mines to analyze the environmental impacts of UCG. The gasification converts the carbon in the coal to syngas and heat. We carried out a numerical simulation of the two-dimensional unstable heat conduction in the coal and overburden, with the aim of judging the influence of this heat source on the surroundings, including the surface. The results show that the temperature in the surrounding rock first increases and then decreases with time, the peak of the temperature curve decreases gradually, and its position moves inside the surrounding rock from the ignition point. A small amount of potentially dangerous syngas leaks from the UCG cavity and channels into vulnerable areas depending on working pressures. The danger of explosion and poisoning in vulnerable zones was evaluated by the simulation model. The results show that the danger is real but by monitoring and controlling the air in the vulnerable area it is possible to reduce this risk.
- 10 May 2018
- Published by MDPI AG in Sustainability
- Vol. 10 (5) , 1512
Open AccessSome Influences of Underground Coal Gasification on the Environment
Increasing energy costs and energy demand have renewed global interest in clean coal technologies. Underground Coal Gasification (UCG) is an industrial process that converts coal into product gas. UCG is a promising technology with a lot of health, safety and environmental advantages over conventional mining techniques. UCG carries risks to human health, agriculture and the environment. This article briefly analyzes the advantages and negative environmental impacts of UCG. It describes experimental objects, mathematical models as tools for simulation cases and it used coal from UCG experiments in Cigel, Barbara and Wieczorek mines to analyze the environmental impacts of UCG. The gasification converts the carbon in the coal to syngas and heat. We carried out a numerical simulation of the two-dimensional unstable heat conduction in the coal and overburden, with the aim of judging the influence of this heat source on the surroundings, including the surface. The results show that the temperature in the surrounding rock first increases and then decreases with time, the peak of the temperature curve decreases gradually, and its position moves inside the surrounding rock from the ignition point. A small amount of potentially dangerous syngas leaks from the UCG cavity and channels into vulnerable areas depending on working pressures. The danger of explosion and poisoning in vulnerable zones was evaluated by the simulation model. The results show that the danger is real but by monitoring and controlling the air in the vulnerable area it is possible to reduce this risk.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 85-91
Mathematical modelling of rotary-heart furnace
Rotary-heart furnace serves for heating steel semi products before tube rolling. This furnace belongs between industry furnaces with a bigger consumption of fuel. Also, the building and reconstruction furnace is expensive. One way as apply unbiased judgement effectiveness of investment design furnace appears mathematical modelling. Therefore, in this paper is briefly described the mathematical dynamical model of rotary-heart furnace and simulation cases. The parametric study results indicated that partial an exchange of the current a cylindrical barrel by a hanging roof a little deteriorates effectiveness and un-uniformity of heated steel charge.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 85-91
Mathematical modelling of rotary-heart furnace
Rotary-heart furnace serves for heating steel semi products before tube rolling. This furnace belongs between industry furnaces with a bigger consumption of fuel. Also, the building and reconstruction furnace is expensive. One way as apply unbiased judgement effectiveness of investment design furnace appears mathematical modelling. Therefore, in this paper is briefly described the mathematical dynamical model of rotary-heart furnace and simulation cases. The parametric study results indicated that partial an exchange of the current a cylindrical barrel by a hanging roof a little deteriorates effectiveness and un-uniformity of heated steel charge.
- 1 July 2017
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 50 (1) , 13772-13777
Extremum Seeking Control of Carbon Monoxide Concentration in Underground Coal Gasification
- 1 July 2017
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 50 (1) , 13772-13777
Extremum Seeking Control of Carbon Monoxide Concentration in Underground Coal Gasification
- Open Access
- 30 June 2017
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica
- Vol. 57 (3) , 182-200
APPROACHES TO THE GAS CONTROL IN UCG
APPROACHES TO THE GAS CONTROL IN UCG
- 30 June 2017
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica
- Vol. 57 (3) , 182-200
Open AccessAPPROACHES TO THE GAS CONTROL IN UCG
APPROACHES TO THE GAS CONTROL IN UCG
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 52-57
Mathematical model for optimisation of a thicknesses of furnace lining
Industrial energy consumption represents a large part of the energy flow in world. Industry furnaces belong to group with high energy consumption. Mathematical modelling and simulation cases appear as suitable tools, methods for decreasing energy consumption in this field. A simulation model has been used to determine the best geometry and working parameters of kiln by aim to reduce specific energy consumption. But this optimization process of minimizing specific energy consumption among other things is reason of increasing investment costs for furnace lining. In paper is defined mathematical model for minimizing costs caused by better insulation. Practical ranges of different insulation thicknesses are included as a set of inequality constraints. An objective function is formulated by aim to minimize material costs for insulation layers of furnace walls, bottom and vault. Developed optimization mathematical model is solved by linear programing. Final result is design of optimal furnace lining with same specific energy consumption. This optimisation procedure is shown for tunnel kiln.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 52-57
Mathematical model for optimisation of a thicknesses of furnace lining
Industrial energy consumption represents a large part of the energy flow in world. Industry furnaces belong to group with high energy consumption. Mathematical modelling and simulation cases appear as suitable tools, methods for decreasing energy consumption in this field. A simulation model has been used to determine the best geometry and working parameters of kiln by aim to reduce specific energy consumption. But this optimization process of minimizing specific energy consumption among other things is reason of increasing investment costs for furnace lining. In paper is defined mathematical model for minimizing costs caused by better insulation. Practical ranges of different insulation thicknesses are included as a set of inequality constraints. An objective function is formulated by aim to minimize material costs for insulation layers of furnace walls, bottom and vault. Developed optimization mathematical model is solved by linear programing. Final result is design of optimal furnace lining with same specific energy consumption. This optimisation procedure is shown for tunnel kiln.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 94, 424-428
The verification of thermodynamic model for UCG process
In this paper is described thermodynamic model for UCG process and his verification. The main task of thermodynamic process is finding the composition of gasification products by known thermodynamic temperature and by known pressure, according minimization of Gibson energy of system. This task was mathematical formulated and solved with optimization method of the Lagrange multipliers with restrictions. The verification of this model was made on the data obtained from laboratory and real experiments.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 94, 424-428
The verification of thermodynamic model for UCG process
In this paper is described thermodynamic model for UCG process and his verification. The main task of thermodynamic process is finding the composition of gasification products by known thermodynamic temperature and by known pressure, according minimization of Gibson energy of system. This task was mathematical formulated and solved with optimization method of the Lagrange multipliers with restrictions. The verification of this model was made on the data obtained from laboratory and real experiments.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 352-357
Modeling of flowing underground waters and leakage of syngas from Underground Coal Gasification
The process of Underground Coal Gasification (UCG) involves the partial burning of coal underground. The product so called syngas is possible to use as fuel in electric generating plant and in chemical industry as raw material. The flowing of underground waters can cause danger or break off UCG. If a syngas leaks in vulnerability area, it can be the cause of poisoning and explosion in this zone. In this study is presented mathematical model and simulation cases of flowing underground waters and the leak of syngas through overburden. The simulation model has been built by using Darcy's law for saturated overburden. Outputs from simulation afford opportunity to analyze these negative impacts of UCG.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 352-357
Modeling of flowing underground waters and leakage of syngas from Underground Coal Gasification
The process of Underground Coal Gasification (UCG) involves the partial burning of coal underground. The product so called syngas is possible to use as fuel in electric generating plant and in chemical industry as raw material. The flowing of underground waters can cause danger or break off UCG. If a syngas leaks in vulnerability area, it can be the cause of poisoning and explosion in this zone. In this study is presented mathematical model and simulation cases of flowing underground waters and the leak of syngas through overburden. The simulation model has been built by using Darcy's law for saturated overburden. Outputs from simulation afford opportunity to analyze these negative impacts of UCG.