SKSergey Koshel

Sergey Koshel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sergey Koshel has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ВИЗНАЧЕННЯ ЗМІНИ РЕЖИМІВ РУХУ ГРАНУЛЬОВАНОГО СЕРЕДОВИЩА В ДВОХ РУХОМИХ КАМЕРАХ ГАЛТУВАЛЬНОЇ МАШИНИ

    by Марк Залюбовський, Сергій Кошель, Микола Рубанка, Дмитро Бевз

    Analytical studies of a machine with two moving chambers, designed for performing finishing tumbling processes, were carried out using the computer-aided design software “SolidWorks – 2024.” The research focused on analyzing the influence of such factors as the rotational speed of the drive shaft, the scaling coefficient, and the coefficient that characterizes the ratio of the total distance between the axes of the holders to the working moving chambers, on the variation of motion modes of the granular medium in each of the two chambers, which are interconnected by a prismatic kinematic pair. A classification of the motion modes of the granular medium is proposed, highlighting layered, combined, and avalanche-like regimes. Each of these motion modes defines the conditions for carrying out certain types of finishing tumbling operations or mixing processes of loose fine-dispersed materials. The influence of such factors as the speed of rotation of the drive shaft, the scale factor and the factor characterizing the ratio of the total distance between the axes of attachment of the holders to the working chambers on the change in the modes of movement of the granular medium in each of the two working chambers, which are interconnected by a kinematic pair of the translational type, was investigated. Empirical dependencies were obtained, allowing the calculation of the critical drive shaft rotation speeds at which the corresponding motion mode of the granular medium begins to form in each working chamber. It was found that the transition from layered to combined and further to avalanche-like motion in the chamber connected to the driven holder occurs at lower drive shaft speeds. However, overall, the difference in the drive shaft speeds characterizing the change of motion modes in the two chambers is relatively small and can be neglected. The derived mathematical relationships can be effectively applied by engineers at the design stage of this type of equipment.

  • Open Access

    ЕКСПЕРИМЕНТАЛЬНЕ ДОСЛІДЖЕННЯ ВПЛИВУ РАДІУСА ЦИЛІНДРИЧНОЇ РОБОЧОЇ ЄМНОСТІ НА РЕЖИМ РУХУ МАСИВУ ДЕТАЛЕЙ У ТЕХНОЛОГІЧНІЙ ЄМНОСТІ ГАЛТУВАЛЬНОЇ МАШИНИ

    by Олександр Кошель, Марк Залюбовський, Сергій Кошель, Ганна Кошель

    The results of an experimental study on the mutual influence of the rotational frequencies of two driving shafts of the developed tumbling machine and the radius of a cylindrical processing container on the conditions governing changes in the motion regime of the working bulk of parts in the working container were obtained and mathematically processed. An experimental research plan was developed to conduct the study. During its implementation, interdependencies were established between the rotational frequencies of the driving shafts responsible for the carrier and relative motions of the cylindrical working container, which performs complex spatial motion, and its radius, on the motion regimes of the working bulk of parts. Experimental investigations were carried out to determine the influence of processing containers of different diameters used in the developed tumbling machine on the conditions for the formation of a mixed motion regime of the working bulk of parts in the working container. The capability of the machine of the developed design to operate with cylindrical processing containers of different diameters installed was practically demonstrated. The machine ensures the motion regimes of the working bulk of parts required for processing in the container under conditions of independently varying rotational frequencies of its two driving shafts, differing in both magnitude and direction. It was established that varying the radius of the cylindrical processing container from a smaller to a larger value affects the interdependence between the parameters of the relative and carrier rotational frequencies of the machine driving shafts, at which a change in the motion regime of the working bulk from cascading to cascading–waterfall is observed. An increase in the container radius from a smaller to a larger value necessitates a simultaneous decrease in both the carrier and relative rotational frequencies of the driving shafts. The established interdependencies between the parameters of the relative and carrier rotational frequencies of the machine driving shafts make it possible to vary them in such a way that, for a selected diameter of the cylindrical processing container, motion of the working bulk with the required intensity along and relative to the geometric axis of the container can be achieved, thereby creating optimal conditions for their processing.

  • Open Access

    ЕКСПЕРИМЕНТАЛЬНЕ ДОСЛІДЖЕННЯ ВПЛИВУ КУТА НАХИЛУ ГЕОМЕТРИЧНОЇ ОСІ РОБОЧОЇ ЄМНОСТІ ЦИЛІНДРИЧНОЇ ФОРМИ У ГАЛТУВАЛЬНІЙ МАШИНІ УДОСКОНАЛЕНОЇ КОНСТРУКЦІЇ НА РЕЖИМИ РУХУ МАСИВУ ДЕТАЛЕЙ У ТЕХНОЛОГІЧНІЙ ЄМНОСТІ

    by Олександр Кошель, Марк Залюбовський, Сергій Кошель, Ганна Кошель

    The article presents the results of an experimentally conducted and mathematically processed study of the mutual influence of the rotational frequencies of two driving shafts and the inclination angle of the working container relative to the horizontal in a tumbling machine specially designed for processing light industry components on the motion regime of the workpiece bulk within the working container. A developed experimental research plan is presented for studying the influence of the inclination angle of the geometric axis of a cylindrical working container of a tumbling machine on the motion regime of the workpiece bulk in a working container with complex spatial motion. The influence of the container inclination angle on the motion regime of the workpiece bulk in the working container was experimentally investigated for various inclination angles. Mathematical models were obtained that establish the relationship between the rotational frequencies of the relative and carrier driving shafts of the machine of the developed design, at which a transition of the motion regime of the workpiece bulk in the container from cascading to cascading–waterfall occurs; their adequacy was verified. It was established that varying the inclination angle of the working container, measured at the vertically upper position of the crank, from a smaller to a larger technologically feasible value leads to the necessity of reducing the carrier rotational frequency and simultaneously increasing the relative rotational frequency of the driving shafts of the tumbling machine in order to ensure a cascading–waterfall motion of the workpiece bulk. To maintain an unchanged motion regime of the workpieces in the container with the driving shaft responsible for the carrier motion of the workpiece bulk stopped, an increase in the inclination angle of the container from a smaller to a larger value requires an increase in the rotational frequency of the shaft responsible for the relative motion of the container. Conversely, with the driving shaft responsible for the relative motion of the container stopped, an increase in the inclination angle necessitates a decrease in the rotational frequency of the shaft responsible for the carrier motion of the container. The obtained results can be used to determine the rotational frequencies of the driving shafts required for processing workpieces of a specific assortment in order to achieve optimal processing results on the machine of the developed design.

  • Open Access

    Design of a tumbling machine (mixer) using a statically determinate spatial mechanism and determination of rational geometric parameters

    by Mark Zalyubovskyi, Oleksii Volianyk, Mykola Rubanka, Sergey Koshel, Hanna Koshel, Serhiy Popovichenko

    The object of this study is tumbling equipment in which working containers execute a complex spatial motion. Articulated spatial mechanisms are widely used in various branches of industry, particularly in mechanical engineering, including mechanisms that contain passive constraints in their structure. The presence of passive constraints can cause operational problems and negatively affect equipment reliability. Therefore, an important task is the synthesis of articulated spatial mechanisms through modification of existing structures in order to eliminate passive constraints. This paper reports the synthesis of a statically determined seven-link articulated spatial mechanism with revolute kinematic pairs. A technique for eliminating a passive constraint in the structure of an articulated spatial mechanism has been proposed, which allows for its static determinacy. As a result, the need to compensate for inaccuracies in geometric relationships between the links by means of clearances in the kinematic pairs is eliminated, making it possible to improve operational characteristics and prolong service life. The introduction of an auxiliary link into the spatial kinematic chain creates conditions for effective implementation of tumbling technological operations by increasing the amplitude of spatial displacement of the container. Analytical relationships between the main geometric parameters of the seven-link spatial mechanism that determine its operability have been established. The derived mathematical dependences allow a justified selection of rational geometric parameters at the design stage and provide a basis for calculating key geometric characteristics for further engineering application in industrial practice.

  • Determination of the velocities of the points of the third-class mechanism with three leading links using the graph-analytical method

    by S Koshel, V Dvorzhak, H Koshel, M Zaliubovskyi, I Panasiuk

    Purpose. To develop sequences of actions and conduct a kinematic study of a complex planar mechanism of the third-class with three leading links by the graph-analytical method to determine the actual values of the angular velocities of individual and linear velocities of all points coinciding with the centres of the kinematic pairs of the mechanism. Methodology. The kinematic study of the twelve-link mechanism was carried out using the course provisions of the theory of mechanisms and machines about the theory of the structural scheme of mechanical systems and the kinematic analysis of lever mechanisms by the graph-analytical method. Graphic constructions were made in the automated design and drawing system Autocad, which allowed us to bring the accuracy of graphic constructions to the generally accepted level of engineering calculations. Findings. Using the principles of the theory of mechanisms structure of higher course classes of the theory of mechanisms and machines, a mechanism with three degrees of mobility was considered in the form of three mechanisms, in which the influence of the movement of one leading link with predetermined kinematic parameters on the movement of the mechanism links was successively investigated, for which systems of kinematic equations were compiled with their subsequent solution in the form of graphic constructions. The calculation of the actual angular velocities of those links was obtained, absolute the movement of which is caused by their kinematic attachment to the stationary riser of the mechanism. Calculation of the linear velocities of the points that coincide with the geometric centres of the rotational kinematic pairs of the driven links of the mechanism of the third-class with three leading cranks was performed. Originality. A plan was developed, and a sequence of actions was implemented, which made it possible to perform kinematic studies and determine the linear velocities of the points that coincide with the geometric centres of the rotational kinematic pairs of links of a complex twelve-link mechanism of the third-class with three leading links using the graph-analytical method. A sequence of studies specially developed for such a planar mechanism with three cranks made it possible to determine the actual values of the angular velocities of the links, the absolute movement of which is determined by their kinematic connection to the stationary body. This made it possible to compile systems of vector kinematic equations to determine the linear velocities of the points of the mechanism of the third-class with three leading links and solve them graphically. Practical value. The numerical values of the kinematic parameters were obtained and compared with the parameters of the same mechanism, which were calculated using the method of mathematical modelling in the Mathcad software environment. The coincidence of the results of the research performed by two different methods with 95 per cent probability was confirmed, which is a simultaneous confirmation of the credibility of the results obtained by such methods of analysis. Expert research of complex mechanical systems using the graph-analytical method is recommended if engineering calculations are obtained using mathematical modelling technologies.

  • Analysis of the third class mechanism using the modeling method in the Mathcad software environment

    by S Koshel, V Dvorzhak, H Koshel, M Zalyubovskii, I Panasiuk

    Purpose. To carry out a kinematic analysis of a flat twelve-link hinged mechanism with three leading links, the basis of which is a structural group of links of the third class of the fourth order with rotational kinematic pairs, which is used in technological equipment. Methodology. The kinematic study of a flat complex mechanism of the third class with three leading links was performed using the mathematical modeling method in the Mathcad software environment. Findings. Using the method of mathematical modeling, the mechanism was presented in the form of free vectors built on its links, for which, taking into account the presence of three leading links, three vector contours were selected, which made it possible to draw up a system of vector equations of their closedness with further solving by a numerical method in the Mathcad software environment. The functions of the rotation angles of the mechanism links, their angular velocities and accelerations were obtained in analytical and graphical form depending on the rotation angle of the first driving crank of the mechanism, the calculation of the angular velocities and accelerations of all the driven links of the mechanism was performed. Originality. A sequence was developed and a kinematic study of a complex planar mechanism of the third class with three leading links was done, the basis of which is a structural group of links of the third class of the fourth order. Schematic modeling of the mechanism with three leading links was performed, a visualization schedule of its kinematic scheme was built, and a valid version of its assembly was obtained from many possible ones, for which the values of kinematic parameters of all its links were determined. Practical value. An analysis of the effect of the kinematic parameters of the three leading links of the third-class mechanism on the movement of the working body of the technological equipment was carried out. From the analysis of the obtained research results for the cycle of the mechanism the reason was found for the incomplete technological stoppage of the link, which should provide the working body of the machine for the required period of time. Recommendations of the elimination were made to identify the deficiency and proposals for the need to improve the drive of this equipment.

  • Synthesis and research of the spatial eight-link mechanism of the barreling machine

    by M Zalyubovskii, I Panasyuk, S Koshel, O Koshel, L Akimova

    Purpose. Geometric synthesis of a statically determined spatial eight-link hinged mechanism with rotary kinematic pairs of a barreling machine, in which the working capacity carries out a complex spatial movement, followed by an analytical study of the structural features of the machine mechanism. Methodology. An analytical approach was used in the study of the eight-link hinged mechanism with rotary kinematic pairs, which consists of geometric and structural synthesis, and the design of barreling machine was modeled in the SolidWorks 2021 automated design software. Findings. One of the possible options for freeing the spatial mechanism of the barreling machine from passive connection is proposed, the synthesis of a statically determined spatial eight-link hinged mechanism with rotational kinematics is carried out. An appropriate design of a barreling machine with two driving links has been developed, the use of which creates conditions for increasing its reliability during operation and simultaneously increasing the productivity of performing the corresponding barreling operations. Analytical studies of the main geometric and structural parameters of the barreling machine were carried out. Originality. The connection between the corresponding geometric parameters of the synthesized statically determined spatial eight-link mechanism is established, which allows determining the rational ratio of the lengths of its links to each other. The relationship between the lengths of the links, their position and the angle of swing of the rocker arm together with the drive shaft of the machine is also established. Practical value. The synthesis of a statically determined spatial eight-link hinged mechanism with rotary kinematic pairs with two degrees of mobility was performed. Based on the synthesis of the mechanism, a new design of the barreling machine with two driving links was developed. Mathematical expressions for calculating the main geometric relationships of the link lengths of the developed machine structure were obtained.


  • KINEMATIC STUDY OF A FOURTH-CLASS MECHANISM WITH THREE TRANSLATIONAL AND OTHER ROTATIONAL KINEMATIC PAIRS

    by Sergey Koshel, yiv National University of Technology and Design, Ganna Koshel, Mark Zalyubovskyi, Oleksandr Koshel, Open International University of Human Development “Ukraine”, Kyiv National University of Technology and Design

  • СТРУКТУРНИЙ АНАЛІЗ МЕХАНІЗМІВ ЧЕТВЕРТОГО КЛАСУ З ТРЬОМА СКЛАДНИМИ ЛАНКАМИ

    by Сергій Кошель, Ганна Кошель, Марк Залюбовський, Олександр Кошель

    A structural study of a complex planar mechanism of the fourth class with one driving link and a moving closed loop was performed. The contour has the form of a quadrangle, which is formed by three links that have plane-parallel movement and one link that rotates around a fixed axis. The circuit is formed by four links: three connecting rods, two of which are complex links and are located opposite each other, and one rocker, which takes part in the formation of three kinematic pairs. Structurally, the set of six links and nine kinematic pairs, which is the basis of a complex mechanism, belongs to the group of links of the fourth class and the third order. We have developed possible variants of structural groups of links of the fourth class of the third order with a closed circuit, in which the nature of kinematic pairs and their location were taken into account. For various variants of structural groups of links, we obtained structural formulas of structures of mechanisms of the fourth class. We used the method of structural change of the actual leading link of the mechanism with another conditionally possible one. The obtained results of the study allow us to determine the sequence of further studies of the fourth-class mechanism with one structural group of higher-class links in the form of a second-class mechanism with three sequentially connected structural groups of the corresponding class.