SPSergey V. Plaksin

Sergey V. Plaksin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sergey V. Plaksin has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determining the Current State of Health Electrochemical Energy Storages in the Vehicles Power Supply System

    by S. V. Plaksin, D. V. Ustymenko, M. Ya. Zhytnyk, R. Yu. Levchenko, S. Ya. Ostapovska, I. V. Tymchenko

    Purpose. The purpose of the proposed work is to increase the efficiency of using electrochemical energy storages in the vehicles power supply system by determining the current state of health in dynamic operating modes. Methodology. An analytical review of the world literature on the available methods for determining the state of health of electrochemical energy storages was conducted. The features and possibilities of their application were noted, taking into account the specifics of operation on vehicles, which are characterized by dynamic modes with unpredictable changes in the energy balance due to uncontrolled load modes. The analysis of existing methods for determining the level of storage capacity showed that their general drawback is the complexity of practical implementation due to the significant volume of computational operations, as well as the use as information parameters for determining the current state of health of such external parameters as voltage and operating current, the values of which do not correspond to the current energy state of the storage due to the rapidity of transient electrochemical processes during operation in dynamic modes. The conclusion is made about the feasibility of using the pulse galvanostatic method to obtain kinetic parameters of the electrochemical process from the response signal. The dependence of the duration of the depolarization stage on the active surface area of the active mass fraction involved in the electrochemical reaction is theoretically substantiated, which makes it possible to determine the current state of health of energy storage by the time parameters of the depolarization stage, which is described by the depolarization voltage curve Usp(t) on the response signal. The application of the Haar wavelet transform of the depolarization voltage curve on the response signal of the accumulator allows to quickly determine the current state of health of the electrochemical energy storage in dynamic operating modes. Findings. The authors substantiated and experimentally confirmed the possibility of determining the current state of health of the energy storage in dynamic operating modes by the pulse galvanostatic method using the kinetic parameters of the electrochemical process obtained from the response signal and processed by the Haar wavelet transform. Originality. For the first time, the application of wavelet analysis for the service life of the energy storage using the kinetic parameters of the electrochemical process is proposed. Practical value. The results obtained can be used to ensure a more efficient and trouble-free operation of energy storages as part of vehicle power supply systems by obtaining current information about the storage's state of health.

  • Open Access

    EXPERIMENTAL SETUP FOR VERIFICATION OF THE COMBINED TRACTION-LEVITATION SYSTEM CONTROL METHOD

    by S. Plaksin, A. Mukha, D. Ustymenko, Yu. Shkil

    Purpose. Development of an experimental setup for the practical verification of a new control method for the combined propulsion-levitation system of a maglev transport vehicle, based on short, discrete, dual-mode propulsion-levitation modules with local autonomous power supply. Methodology. To address the stated objectives, a comprehensive approach was employed, encompassing a theoretical analysis of existing magnetic levitation technologies and the mathematical and simulation modeling of electrophysical and electromechanical energy conversion processes in "null-flux" suspension systems. Based on the developed theoretical models, a physical experimental setup was de-signed and constructed. Operation of the test facility is controlled via an algorithm for the individually addressed delivery of energy to the coils of dual-mode propulsion-levitation modules. Results. A fully functional control system architecture for a small-scale circular testbed has been developed and technically implemented. A working prototype featuring a stationary stator and a moving disk rotor has been constructed. Testing and verification of the system's components demonstrated that the calculations, circuit simulations, and structural designs aligned with the initial de-sign specifications. The functionality of a microprocessor-based algorithm for distributed, sector-based, coordinate-addressable power delivery was investigated and experimentally validated. This algorithm ensures the synchronous activation of a group of five series-connected coil pairs, determined by the current sector and the rotor's angular position as measured by an absolute encoder. Originality. The concept of integrating propulsion and levitation subsystems into a unified combined system-based on a short, discrete, dual-mode propulsion-levitation module featuring individual addressable control and autonomous power supply from a local energy source‒has been verified. A mechanism for artificially inducing magnetic asymmetry has been developed through the local regulation of current amplitude, direction, and waveform in each individual coil of the dual-mode module, enabling a flexible combination of static and dynamic levitation modes. Practical value. The established experimental testbed serves as a highly effective tool for refining design, circuitry, and software solutions without the significant financial costs associated with constructing full-scale lines. The resulting data and testing methodologies can be directly applied to the design and development of actual, high-performance, next-generation Maglev transport systems-specifically for developing vehicle vibration damping systems, optimizing navigation through curved track sections, and automatically regulating the air gap.

  • Open Access

    Pulse method for determining the current state of health of an electrochemical energy storage device

    by Serhii Plaksin, Mykola Zhitnik, Ruslana Levchenko, Svitlana Ostapovska, Іryna Тymchenko

    A single-pulse galvanostatic method for rapid determination of the current State of Health (SOH) of electrochemical energy storage devices in dynamic operating modes has been developed and experimentally validated. The proposed method enables SOH assessment without interrupting normal load operation. It relies on the Haar wavelet transform to process the response signal of the energy storage device to a short-term test pulse. Considering the specific profile of the response signal, which reflects multi-stage electrochemical kinetics and is described by slowly changing functions, applying the Haar wavelet transform yields a real-time time-frequency representation of the electrochemical process. Processing the depolarization curve of the response signal following the test pulse via the Haar wavelet transform restricts the area under the voltage curve, which correlates directly with the utilization factor of active materials. Thus, the derived wavelet parameters serve as informative indicators for evaluating the current SOH within a specified time window of the depolarization voltage curve. Experimental results reveal an irreversible, gradual decline in SOH over operational time driven by degradation processes, with the degradation rate accelerating in the later stages of service life. This behavior highlights the complex, dynamic, and non-linear nature of degradation in electrochemical energy storage systems. Unlike existing diagnostic techniques, the developed single-pulse galvanostatic method eliminates the need to disconnect the energy storage unit from the load, allowing real-time SOH monitoring under actual operating conditions.

  • Open Access

    МОДЕРНІЗАЦІЯ ПЕРЕДОВИХ ТРАНСПОРТНИХ ТЕХНОЛОГІЙ ДЛЯ ЗАБЕЗПЕЧЕННЯ СТАЛОГО РОЗВИТКУ СУСПІЛЬСТВА

    by С. Плаксін, A. Mukha, Д. Устименко, О. Плаксіна, Ю. Шкіль, Л. Погоріла, S. Plaksin, O. Plaksina, Yu. Shkil, L. Pogorila

    Вступ. Сучасними трендами у розвитку транспорту є підвищення його енергоефективності з одночасним зменшенням негативного впливу на екосистеми.Проблематика. Діючим магнітолевітаційним системам притаманні «історичні» особливості, що суттєво обмежують їхню енергоефективність, точність управління режимами роботи тягового лінійного двигуна тощо.Мета. Створення безінерційної системи управління тягово-левітаційною системою магнітоплану, щопоєднує в собі переваги електромагнітного і електродинамічного способів підвішування та отримує живлення від екологічно раціональної енергетичної системи.Матеріали й методи. Використано теорії та методики електричної тяги, електричних машин, електротехніки, електроніки та теорії автоматичного управління для модифікації структури та параметрів системи електропостачання, тягового лінійного приводу, системи підвішування та способів управління тяговолевітаційною системою магнітоплану.Результати. Значного поліпшення магнітолевітаційної технології можливо досягти завдяки взаємо узгодженій комбінації двох способів магнітної левітації — електромагнітної та електродинамічної, шляхом використання принципово іншої архітектури побудови маглев-траси — не з «довгих» секцій з трифазнимисиловими обмотками, а з дискретних базових модулів, що мають можливість електронного реконфігурування їхньої структури та режиму роботи. Це дозволяє змінювати режими роботи котушок модулів у будьякому порядку за заданим алгоритмом та подавати енергію тільки в ті котушки, що покриваються проєкцією магнітоплану на шляхову структуру. Енергоефективність такої системи досягається локальним живленням однотипних модулів від розподіленої мережі фотоелектричних перетворювачів.Висновки. Обґрунтовано концепцію тягово-левітаційної системи другого покоління на основі синхронізованого використання електродинамічного і електромагнітного способів левітації, суть якої у створенні підйомної та тягової сил однотипними дискретними модулями, що працюють у різних режимах завдякивідповідному управлінню.

  • Open Access

    Identification of the characteristics of control signal generation for implementing the traction mode of a physical model of magnetic levitation transport

    by Yehor Chupryna, Andrii Mukha, Serhii Plaksin, Dmytro Ustymenko, Oleh Bondar, Oksana Marenych, Oleksandr Holota, Andrii Antoniuk

    The object of this research is the process of generating control signals for implementing the traction mode of a physical model of a magnetic levitation transport system. The problem that was solved was the formation of control signals for implementing the traction mode of the physical model and the method of switching track coils. In the experimental physical model, the traction mode is implemented by control signals formed on the basis of the angular values of the encoder corresponding to the position of the crew. Based on these signals, the traction modules of the stand are commutated to ensure the necessary polarity of the magnetic field, which creates traction force and ensures the movement of the crew past the section. The implementation of the traction mode requires accurate determination of the position of the crew relative to the track structure. For this purpose, an encoder signal is used, the information from which is processed in the control unit of the track structure section. A schematic solution and an algorithm for the operation of this unit for a physical model are proposed. The search for an element base for control boards requires performance verification. From several variations of boards, the one that implements the proposed algorithm with satisfactory process quality was selected. The main research method is an experiment conducted on a physical model stand. A switching control unit for the traction section of the physical model stand has been developed and implemented, which includes: control boards, a motherboard and software on the Arduino platform. A board option with three DC-DC converters was selected, which ensured stable operation of the traction section. The main characteristics of electrodynamic processes were obtained, namely: moments of polarity switching of modules, changes in voltage, current and power during the passage of the crew past the section. The switching range of the traction section is approximately five seconds. The results obtained create the prerequisites for the development of experimental stands and models of maglev transport for further research into traction modes.

  • Open Access

    POWER SUPPLY SYSTEM OF A 2-MODE TRACTION-LEVITATION MODULE OF A HIGH-SPEED MAGLEV TRANSPORT ROAD STRUCTURE

    by S. Plaksin, A. Mukha, D. Ustymenko, Yu. Shkil, O. Kitaiev

    Purpose. The purpose of the work is to select and justify the structure of the power supply system of a 2-mode traction-levitation module (TLM) of a road structure of an improved high-speed magnetolevitation transport system, taking into account the features of energy generation, accumulation, storage and distribution with the use of photovoltaic converters in it. Methodology. In the process of working on the material, methods of analysis and synthesis were used to study scientific works on the energy supply of magnetic levitation transport systems, electrical engineering and electronics to modify the structure and parameters of the power supply system of a 2-mode traction-levitation module. Particular attention is paid to the issue of using hydrogen fuel cell technology. Results. A short 2-mode traction-levitation module is the main and universal module for building the track structure of an improved high-speed maglev transport system. The power supply system of such a module must meet the highest requirements for both energy efficiency and reliability and fault-free operation. The work proposes an autonomous power source for a 2-mode traction-levitation module where solar energy is used as the primary energy. To solve the problem of fluctuations in solar insolation throughout the day and year, a hybrid energy storage system is introduced into the structure, which has two independent systems - the main one on lithium-ion batteries in combination with a Supercapacitor and a backup one using hydrogen fuel cell technology. This approach is able to provide: uninterrupted power supply to the TLM regardless of weather conditions; supply of a short high-energy pulse to the TLM coils at a time determined by the position of the magnetic plane relative to the track; reconfiguration of TLM coils in accordance with the operating mode (traction or levitation); energy efficiency due to powering only the section of the route over which the maglev is currently located; high reliability of operation and fault tolerance of the power system due to the presence of a backup system based on a regenerative fuel cell. Originality. The work substantiates the concept of building a power supply system for a high-speed maglev transport route. The basis for improving the energy performance of the transport system is the integration of an autonomous hybrid power source based on photovoltaic converters into a 2-mode traction-levitation module. Practical value. The practical aspect of the work is to expand the scope of application of hydrogen fuel cell technology as an energy storage system for an autonomous power source for a high-speed maglev transport route.

  • Open Access

    Фізичні основи створення прецизійної системи управління магнітолевітаційним транспортом, інтегрованої з його фотоелектричною енергосистемою

    by В.о. Дзензерський, М.я. Житник, С.в. Плаксін, Ю.в. Шкіль

    Поступальне зростання економіки будь-якої країни передбачає розвиток високошвидкісного транспорту для задоволення потреби соціуму в скороченні часу, потрібного на переміщення людей і вантажів. Серед різних видів високошвидкісного наземного транспорту саме магнітолевітаційний транспорт (магнітоплани) визнаний найбільш перспективним. Робота присвячена інтеграції трьох перспективних наукових напрямів/ технологій: магнітолевітаційного транспорту, фотоелектричного перетворення енергії та фазометричної радіонавігації. Саме ця інтеграція дає в результаті несумарний синергетичний ефект. Досягнення цілей сталого розвитку економіки Держави у межах традиційних транспортних і енергетичних технологій є проблематичним, оскільки енерговитрати транспортних систем перевищують третину споживаної енергії, а найшвидший вид транспорту — повітряний є одним із провідних забруднювачів атмосфери. У даній роботі обґрунтовується перспективний шлях розвитку МАГЛЕВ-транспорту за рахунок об’єднання в єдиній системі технологій поновлюваної енергетики та магнітолевітаційного транспорту. У роботі задіяні методи системного аналізу і декомпозиції, статистичного аналізу сонячної інсоляції, радіофізичного експерименту, комп’ютерного моделювання фотоелектричних перетворювачів енергії, алгоритмізації процесів поточного контролю і прогнозування стану енергонакопичувачів. Результатом проведених досліджень є розробка фізико- технічних основ створення новітньої прецизійної системи управління для удосконалення магнітолевітаційного транспорту. За рахунок об’єднання в єдиній системі технологій поновлюваної енергетики та магніто-левітаційного транспорту пропонується створення системи всепогодного гарантованого електроживлення на основі сонячної енергії та надійної прецизійної швидкодіючої системи керування в режимі реального часу.

  • Open Access

    Enhancement of Communication Quality in the X-Band Downlink Channel for Leo Earth Observation Satellites

    by V. Magro, S. Plaksin

    Introduction. Earth observation by low Earth orbit (LEO) satellites plays a critical role in supporting various sectors of the national economy. To increase the efficiency of this technology, optimizing the video data downlink —particularly with respect to the satellite’s elevation angle relative to the ground station — is essential.Problem Statement. The communication link margin varies depending on the selected signal waveform, whilechanges in the satellite’s elevation angle alter the propagation path length and, consequently, the energy characteristics of the downlink. For small satellites such as CubeSats, which have limited onboard power, the potential to transmit high-data-rate video within a brief communication window — depending on modulation mode — has not been sufficiently studied.Purpose. This study aims to enhance the performance of Earth remote sensing systems by improving the energy efficiency and throughput of satellite-to-ground video transmission in the X-band.Materials and Methods. The analysis applies microwave communication theory to evaluate the energy budget of the downlink, incorporating Adaptive Coding and Modulation (ACM) techniques supported by the DVB-S2/S2X standard. The study considers various modulation and coding (MODCOD) schemes and output power levels at diff erent satellite elevation angles.Results. The energy margin of the LEO satellite downlink has been calculated, enabling an assessment of thefeasibility of using DVB-S2X for video transmission from Earth observation satellites. The findings have shownthat at low elevation angles, a connection can be established using the most robust mode (QPSK 1/4), supporting a data rate of 38 Mbps. At elevation angles exceeding 50 degrees, higher-order modulation such as 32APSK 9/10 becomes feasible, achieving data rates up to 384 Mbps.Conclusions. The study has demonstrated that applying the DVB-S2(X) standard to CubeSat-class Earth observation missions enables more efficient and adaptive use of the X-band downlink channel. This approach has improved flexibility and throughput of video data transmission, especially when tailored to satellite elevation angles.


  • Open Access

    ІМПУЛЬСНИЙ МЕТОД КОНТРОЛЮ ПОТОЧНОГО СТАНУ ЗАРЯДЖЕНОСТІ ЕЛЕКТРОХІМІЧНОГО НАКОПИЧУВАЧА ЕНЕРГІЇ

    by С. В. Плаксін, М. Я. Житник, Р. Ю. Левченко, С. Я. Остаповська, S. Plaksin

    Важливе значення для підвищення ефективно- сті використання енергії електрохімічного накопичувача енергії та збільшення терміну його експлуатації має ко- нтроль відповідними методами поточних енергетичних параметрів у динамічних режимах роботи, які характе- рні при застосуванні накопичувача у складі автономних систем енергозабезпечення з відновлюваних джерел енергії, а також електромобілів та гібридних еле- ктромобілів. За результатами аналізу існуючих методів контролю стану зарядженості накопичувача енергії зроблено висновок про неможливість використання існуючих методів для контролю поточного стану зарядженості накопичувачів через властиві їм недоліки. Мета роботи – розробка методу конт- ролю поточного стану зарядженості електрохімічного накопичувача енергії для підвищення ефектив- ності використання його енергії в динамічних режимах роботи за значеннями кінетичних параметрів електрохімічного процесу. Методи дослідження – порівняльний аналіз недоліків існуючих методів кон- тролю стану зарядженості електрохімічних накопичувачів енергії для вибору методу оцінки поточного стану зарядженості за значенням кінетичних параметрів електрохімічного процесу; вибір методу ма- тематичної обробки сигналу відгуку накопичувача енергії для одержання необхідних кінетичних пара- метрів для оцінки та контролю поточного стану зарядженості. На підставі проведеного аналізу недо- ліків існуючих методів контролю стану зарядженості та існуючих методів обробки сигналу відгуку розроблено імпульсний гальваностатичний метод контролю поточного стану зарядженості, засно- ваний на використанні як інформативний кінетичний параметр постійної часу процесу деполяризації, виділеної із сигналу відгуку накопичувача на імпульс струму. Для математичної обробки процесу депо- ляризації застосовано вейвлет-перетворення кривої деполяризації в площину час – частота з викорис- танням вейвлета Хаара як інформаційного параметра. Доцільність розробленого методу теоретично обґрунтовано та експериментально підтверджено.

  • Open Access

    Research of the Dynamic Indicators of the Track Coil of a Full-Scale Model of High-Speed Magnetic Levitation Transport

    by Y. M. Chupryna, A. M. Mukha, O. I. Bondar, S. V. Plaksin, D. V. Ustymenko, O. O. Holota

    Purpose. The main idea of the work is to experimentally study the dynamic performance of the track coils of a physical model of high-speed magnetolevitation transport with further comparison of their characteristics for a reasonable choice of a rational coil according to such criteria as current rise time and thrust force. Methodology. The research was carried out experimentally. A test bench for determining the dynamic characteristics of track coils was developed specifically for these purposes. The main dynamic indicators include: the time of current rise in the coil, and the auxiliary indicators include: traction force and temperature conditions. Measurements of the time characteristics, in particular, the current rise, were carried out using an oscilloscope, and the traction force was determined by gradually loading a platform mounted on a levitating magnet with a non-magnetic load. Temperature conditions were recorded using a thermal imager. During the work, four types of coils were studied, which differ from each other in such indicators as wire diameter, number of turns, electrical resistance, and inductance. For each of the coils, a series of measurements were made taking into account changes in the duty cycle of the electrical signal. This approach made it possible to assess the effect of the electrical signal duty cycle on the operating modes and dynamic performance of the coils under study. Findings. As a result of the experimental study, the time characteristics of four samples of track coils for a physical model of high-speed magnetolevitation transport were obtained, in particular, the time of current rise, the magnitude of the traction force, and the temperature conditions under load. It has been established that the coil labeled «A» is characterized by relatively high dynamic indicators, namely: the shortest time to reach its operating mode, which is 0.4 s, and the highest thrust, which is 139 g of cargo. In general, these indicators make it possible to determine the coil with the «A» marking as the most rational option for use in a full-scale model.Originality. The prerequisites for further characterization of the physical model of a two-mode magneto-levitation module are created. For the first time, the dynamic parameters of the track coil for a physical model of high-speed magneto-levitation transport were obtained during a laboratory study of its experimental samples. Practical value. Based on the results of the research, a methodology has been developed that establishes a link between the coil's structural parameters and its dynamic performance, which makes it possible to establish rational parameters of the track coil. The parameters of the electrodynamic process, in particular, the time of current rise, the magnitude of the traction force, and the temperature conditions of the coil operation under experimental load were determined.