Hennadii Bratchenko
Hennadii Bratchenko has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Odesa State Academy Of Technical Regulation And Quality
9 shared publicationsG. G. Smagluk
Одеська державна академія технічного регулювання та якост
3 shared publicationsI. S. Seniva
3 shared publicationsA. N. Efymchykov
Military Academy, Odessa, Ukraine
2 shared publicationsD. V. Grygoriev
2 shared publicationsH. H. Smaglyuk
2 shared publications
Latest Publications
- Open Access
- 1 January 2025
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(27),p. 72-80
RESEARCH OF METROLOGICAL CHARACTERISTICS OF HANGING SAFETY AND WEIGHING DEVICES
The article shows that in the complex mechanization and automation of production processes, the elimination of heavy manual labor when performing basic and auxiliary production operations, a large role is assigned to highly productive, reliable and safe-to-operate lifting machines. Increasing the productivity, reliability and safety of lifting machines in many cases depend on the safety and weighing devices used in them. The most effective and rational installation locations for safety devices and scales on lifting machines have been analyzed. We established that the rational installation of scales on the hook and in the hook suspension is. The article describes safety and weighing devices that implement this mounting option. It is shown that the most promising direction for creating safety devices is the development of combined devices that contain force-measuring devices along with the mechanical basis; the possibility of placing all equipment, except for force-measuring sensors, in the crane operator's cab or on the console; and ease of integration into the design of signaling devices. The authors' studies show that for mounted devices, random measurement errors are characteristic, caused by skew in the lifting-lowering load process due to the random nature of friction forces in the hoist system blocks. To reduce the specified error, the authors conducted studies that enabled the creation of crane electronic strain gauge scales with a load capacity of 20 to 200 kN, designed for weighing loads transported by cranes. The scales have individual battery power sources and an indication of the load mass on a light board. The results of experimental and field tests showed that the relative error and variation of measurement readings of these devices under static weighing conditions did not exceed 0.06 % of the measured value, which is within the permissible errors of the scales. У статті показано,що в комплексній механізації та автоматизації виробничих процесів, виключенні важкої ручної праці при виконанні основних і допоміжних виробничих операцій велика роль відводиться високопродуктивним, надійним та безпечним в експлуатації вантажопідіймальним машинам. Підвищення продуктивності, надійності та безпеки їх роботи суттєво залежить від застосовуваних в них запобіжних і зважуючих пристроїв. Проведено аналіз найбільш ефективних та раціональних місць установки вказаних пристроїв на вантажопідіймальних машинах, чим встановлено, що раціональною є установка пристоїв на гаку та в гаковій підвісці. Наведено опис запобіжних та зважуючих пристроїв, які реалізують цей варіант установки. Проведені дослідження показують, що найбільш істотною похибкою таких пристроїв є похибка, що виникає через тертя у напрямних хвостовика гака, яка зменшується зі збільшенням ККД блоків поліспасту.
- 1 January 2025
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(27),p. 72-80
Open AccessRESEARCH OF METROLOGICAL CHARACTERISTICS OF HANGING SAFETY AND WEIGHING DEVICES
The article shows that in the complex mechanization and automation of production processes, the elimination of heavy manual labor when performing basic and auxiliary production operations, a large role is assigned to highly productive, reliable and safe-to-operate lifting machines. Increasing the productivity, reliability and safety of lifting machines in many cases depend on the safety and weighing devices used in them. The most effective and rational installation locations for safety devices and scales on lifting machines have been analyzed. We established that the rational installation of scales on the hook and in the hook suspension is. The article describes safety and weighing devices that implement this mounting option. It is shown that the most promising direction for creating safety devices is the development of combined devices that contain force-measuring devices along with the mechanical basis; the possibility of placing all equipment, except for force-measuring sensors, in the crane operator's cab or on the console; and ease of integration into the design of signaling devices. The authors' studies show that for mounted devices, random measurement errors are characteristic, caused by skew in the lifting-lowering load process due to the random nature of friction forces in the hoist system blocks. To reduce the specified error, the authors conducted studies that enabled the creation of crane electronic strain gauge scales with a load capacity of 20 to 200 kN, designed for weighing loads transported by cranes. The scales have individual battery power sources and an indication of the load mass on a light board. The results of experimental and field tests showed that the relative error and variation of measurement readings of these devices under static weighing conditions did not exceed 0.06 % of the measured value, which is within the permissible errors of the scales. У статті показано,що в комплексній механізації та автоматизації виробничих процесів, виключенні важкої ручної праці при виконанні основних і допоміжних виробничих операцій велика роль відводиться високопродуктивним, надійним та безпечним в експлуатації вантажопідіймальним машинам. Підвищення продуктивності, надійності та безпеки їх роботи суттєво залежить від застосовуваних в них запобіжних і зважуючих пристроїв. Проведено аналіз найбільш ефективних та раціональних місць установки вказаних пристроїв на вантажопідіймальних машинах, чим встановлено, що раціональною є установка пристоїв на гаку та в гаковій підвісці. Наведено опис запобіжних та зважуючих пристроїв, які реалізують цей варіант установки. Проведені дослідження показують, що найбільш істотною похибкою таких пристроїв є похибка, що виникає через тертя у напрямних хвостовика гака, яка зменшується зі збільшенням ККД блоків поліспасту.
- 11 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 164-167
Optimization of Single-Channel Moving Target Indication Filters Using Pulse Repetition Interval Staggered
The rapid development of various types of air vehicles, from small unmanned aerial vehicles to supersonic missiles, puts forward increased requirements for radar developers to cover an expanded range of speeds of 10–3000 m/s, especially in multi-target environments. Analytical dependencies for calculating the parameters for the pulse repetition interval staggered law of the pulse signal are proposed. We are using them to increase the efficiency of single-channel filters for moving target indication. A method for optimizing a signal-filter pair to determine the parameters of the signal is proposed. This method is applied to the most common single-channel optimal Doppler filters synthesized according to various quality criteria.
- 11 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 164-167
Optimization of Single-Channel Moving Target Indication Filters Using Pulse Repetition Interval Staggered
The rapid development of various types of air vehicles, from small unmanned aerial vehicles to supersonic missiles, puts forward increased requirements for radar developers to cover an expanded range of speeds of 10–3000 m/s, especially in multi-target environments. Analytical dependencies for calculating the parameters for the pulse repetition interval staggered law of the pulse signal are proposed. We are using them to increase the efficiency of single-channel filters for moving target indication. A method for optimizing a signal-filter pair to determine the parameters of the signal is proposed. This method is applied to the most common single-channel optimal Doppler filters synthesized according to various quality criteria.
- Open Access
- 1 January 2024
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(25),p. 50-59
EQUATIONS OF MOTION A FOUR-WHEEL MOBILE ROBOT WITH INDIVIDUAL WHEEL DRIVE
Unmanned ground vehicles are used in many areas associated with increased danger to people when performing tasks. Among such tasks: evacuation of the wounded from the battlefield; search for mines and clearing minefields; delivery of cargo under enemy fire; performance of tasks in conditions of radiation and chemical contamination, etc. This article studies the dynamics of a four-wheeled mobile robot with indi-vidual wheel control. The differential equations are derived to describe the motion of a four-wheeled mobile robot with individual wheel drive based on the vector-matrix formalism of non-holonomic mechanics using Lagrange equations with undetermined multipliers. Differential equations of motion for a four-wheeled mobile robot with individual wheel drive are obtained. The wheel axles are rigidly connected to their supporting platform. It is shown that the change in the motion direction of a mobile robot corresponds to the case of skid-steer control. The correctness of the obtained equations is checked on examples of limiting cases of mobile robot motion: rectilinear uniformly accelerated, uniform rectilinear motion, and circular uniform motion. The obtained results indicate the feasibility of using differential equations of motion for controlling the acceleration of a four-wheeled mobile robot. A future direction of research should be to find the laws of motion control of a four-wheeled mobile robot, taking into account the characteristics of the electric wheel drives, and to describe the interaction of the robot wheels with the ground surface in more realistic scenarios of the mobile robots application. In this case, the obtained differential equations of the mobile robot motion will be supplemented with equations of motion control in terms of speed
- 1 January 2024
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(25),p. 50-59
Open AccessEQUATIONS OF MOTION A FOUR-WHEEL MOBILE ROBOT WITH INDIVIDUAL WHEEL DRIVE
Unmanned ground vehicles are used in many areas associated with increased danger to people when performing tasks. Among such tasks: evacuation of the wounded from the battlefield; search for mines and clearing minefields; delivery of cargo under enemy fire; performance of tasks in conditions of radiation and chemical contamination, etc. This article studies the dynamics of a four-wheeled mobile robot with indi-vidual wheel control. The differential equations are derived to describe the motion of a four-wheeled mobile robot with individual wheel drive based on the vector-matrix formalism of non-holonomic mechanics using Lagrange equations with undetermined multipliers. Differential equations of motion for a four-wheeled mobile robot with individual wheel drive are obtained. The wheel axles are rigidly connected to their supporting platform. It is shown that the change in the motion direction of a mobile robot corresponds to the case of skid-steer control. The correctness of the obtained equations is checked on examples of limiting cases of mobile robot motion: rectilinear uniformly accelerated, uniform rectilinear motion, and circular uniform motion. The obtained results indicate the feasibility of using differential equations of motion for controlling the acceleration of a four-wheeled mobile robot. A future direction of research should be to find the laws of motion control of a four-wheeled mobile robot, taking into account the characteristics of the electric wheel drives, and to describe the interaction of the robot wheels with the ground surface in more realistic scenarios of the mobile robots application. In this case, the obtained differential equations of the mobile robot motion will be supplemented with equations of motion control in terms of speed
- Open Access
- 1 January 2023
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 1(22),p. 23-34
ESTIMATION OF MEASURING UNCERTAINTY OF ELECTRIC MOTORS TORQUES USING THE THEORY OF FUZZY SETS
The use of the theory of fuzzy variables in metrology opens up new opportunities for taking into account informal information about the sources of uncertainty in the measurement of various mechanical quantities. This is especially relevant when determining errors in the rotational parameters of electric motors. This article discusses a new approach to measurement accuracy assessment that goes beyond traditional measurement methods. In particular, attention is focused on the task of assessing the reliability range of measurements of rotational parameters of electric motors within a certain accuracy class. Each measurement is accompanied by an error that has both systematic and random components. Since the exact value of the measurement results cannot be known within the range that is limited by the accuracy class of the device, the article proposes to consider the true value of the measured value as a fuzzy variable, which allowed getting a better idea of the uncertainty of the measurement. In the article, an attempt was made to estimate the approximate accuracy of measurements of rotational parameters of electric motors using a specially developed membership function. The practical application of this method makes it possible to assess the reliability of measurements in different modes of operation of electrode benders. For a more detailed analysis of this problem, the article provides examples of solving similar problems using the theory of possibilities and the theory of fuzzy sets, which made it possible to better take into account the uncertainties of the rotational parameters of electric motors and determine further ways of developing this problem.
- 1 January 2023
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 1(22),p. 23-34
Open AccessESTIMATION OF MEASURING UNCERTAINTY OF ELECTRIC MOTORS TORQUES USING THE THEORY OF FUZZY SETS
The use of the theory of fuzzy variables in metrology opens up new opportunities for taking into account informal information about the sources of uncertainty in the measurement of various mechanical quantities. This is especially relevant when determining errors in the rotational parameters of electric motors. This article discusses a new approach to measurement accuracy assessment that goes beyond traditional measurement methods. In particular, attention is focused on the task of assessing the reliability range of measurements of rotational parameters of electric motors within a certain accuracy class. Each measurement is accompanied by an error that has both systematic and random components. Since the exact value of the measurement results cannot be known within the range that is limited by the accuracy class of the device, the article proposes to consider the true value of the measured value as a fuzzy variable, which allowed getting a better idea of the uncertainty of the measurement. In the article, an attempt was made to estimate the approximate accuracy of measurements of rotational parameters of electric motors using a specially developed membership function. The practical application of this method makes it possible to assess the reliability of measurements in different modes of operation of electrode benders. For a more detailed analysis of this problem, the article provides examples of solving similar problems using the theory of possibilities and the theory of fuzzy sets, which made it possible to better take into account the uncertainties of the rotational parameters of electric motors and determine further ways of developing this problem.
- 31 August 2022
- Published by Odesa Military Academy in Collection of scientific works of Odesa Military Academy
- No. 17,p. 125-135
ON THE QUESTION OF ASSESSING THE ECONOMIC EFFECT OF COUNTERING INDIVIDUAL ENEMY RADIO ELECTRONIC INTERFERENCE IN AIR COMBAT BY THE METHOD OF AVOIDED DAMAGE
The Russian-Ukrainian war once again showed the importance of using aviation in a war, which can decisively influence the final result of military operations as a whole. The effective use of aviation determines the final result of a military confrontation by 60-70%, but aviation without means of electronic countermeasures and protection today has a rather low survivability, which contributes to the active development of individual electronic interference stations. The authors propose a mathematical model for describing the processes of functioning of airborne weapon control radar stations in conditions of interference and simultaneous active counteraction to enemy jamming stations in order to avoid early full-scale modeling of these processes, since full-scale models have a significant cost. The article also defines a system of indicators and criteria that characterize the effectiveness of the functioning of airborne weapons control radar stations when using known methods of actively counteracting enemy electronic interference in air combat, which, as a result of the uncertainty of the air situation, use the features of fuzzy set theory. The authors carried out a military-economic assessment of the use of methods of actively counteracting enemy radio-electronic interference stations, as well as using the method of prevented damage, the need to use the developed model for early evaluation of the effectiveness of the use of new methods of counteraction or their integrated application was assessed. The model will make it possible to justify the description of the functioning of airborne weapon control radar stations under conditions of interference and simultaneous active counteraction to them, and will also allow evaluating the economic effect of the use of new methods. Keywords: airborne radar stations, military-economic feasibility, mathematical modeling, probability of destruction, interference, active interference stations for personal protection, fuzzy estimates.
- 31 August 2022
- Published by Odesa Military Academy in Collection of scientific works of Odesa Military Academy
- No. 17,p. 125-135
ON THE QUESTION OF ASSESSING THE ECONOMIC EFFECT OF COUNTERING INDIVIDUAL ENEMY RADIO ELECTRONIC INTERFERENCE IN AIR COMBAT BY THE METHOD OF AVOIDED DAMAGE
The Russian-Ukrainian war once again showed the importance of using aviation in a war, which can decisively influence the final result of military operations as a whole. The effective use of aviation determines the final result of a military confrontation by 60-70%, but aviation without means of electronic countermeasures and protection today has a rather low survivability, which contributes to the active development of individual electronic interference stations. The authors propose a mathematical model for describing the processes of functioning of airborne weapon control radar stations in conditions of interference and simultaneous active counteraction to enemy jamming stations in order to avoid early full-scale modeling of these processes, since full-scale models have a significant cost. The article also defines a system of indicators and criteria that characterize the effectiveness of the functioning of airborne weapons control radar stations when using known methods of actively counteracting enemy electronic interference in air combat, which, as a result of the uncertainty of the air situation, use the features of fuzzy set theory. The authors carried out a military-economic assessment of the use of methods of actively counteracting enemy radio-electronic interference stations, as well as using the method of prevented damage, the need to use the developed model for early evaluation of the effectiveness of the use of new methods of counteraction or their integrated application was assessed. The model will make it possible to justify the description of the functioning of airborne weapon control radar stations under conditions of interference and simultaneous active counteraction to them, and will also allow evaluating the economic effect of the use of new methods. Keywords: airborne radar stations, military-economic feasibility, mathematical modeling, probability of destruction, interference, active interference stations for personal protection, fuzzy estimates.
- 1 January 2021
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(19),p. 48-62
ACCURACY ESTIMATION OF MEASURING THE INSTANTANEOUS FREQUENCIES AND PHASES OF COMPONENTS OF THE MULTICOMPONENT NON-STATIONARY SIGNAL
Measurements of instantaneous frequencies and phases of non-stationary components of the multicomponent signals are actual in processing medical, radar, sonar, seismic, vibration, and speech signals. When we measure the parameters of multi-component non-stationary signals, it is a need to measure the instantaneous frequency and current phase of several non-stationary frequency-modulated signal components. In this article, estimates of the measurement accuracy of the specified parameters of the non-stationary signal components were obtained using the method of simulation modeling. Measurement methods based on the short-time Fourier transform and the proposed method with local adaptive matching filtering of signal components in the frequency domain in the time-sliding observation window were studied. Adjustment of matched filters is performed separately for each component of the signal, returning to the time domain and taking into account the filter settings in the previous time window. The simulation method is used for the signal model consisting of three components. The first two components are the frequency modulated harmonic ones and the last is harmonic with constant frequency. The amplitudes of components and additive Gaussian noise variance were variated to study the influence of signal-to-noise ratio on the accuracy of measurements. Estimates of the experimental standard deviation of instantaneous frequencies and current phase measurements were obtained by comparing them with their known dependencies. The frequency laws of non-stationary signal components were chosen to be harmonic, which also allowed us to evaluate the influence of the nonlinearity of the instantaneous frequency change on the measurement accuracy. The results of differential phase measurements between two measurement channels are obtained to illustrate the quality of such ones for multi-component non-stationary signals situations. The results of this study may be useful for the development of imaging methods in inverse synthetic aperture radars (ISAR) and interferometric ISAR.
- 1 January 2021
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- No. 2(19),p. 48-62
ACCURACY ESTIMATION OF MEASURING THE INSTANTANEOUS FREQUENCIES AND PHASES OF COMPONENTS OF THE MULTICOMPONENT NON-STATIONARY SIGNAL
Measurements of instantaneous frequencies and phases of non-stationary components of the multicomponent signals are actual in processing medical, radar, sonar, seismic, vibration, and speech signals. When we measure the parameters of multi-component non-stationary signals, it is a need to measure the instantaneous frequency and current phase of several non-stationary frequency-modulated signal components. In this article, estimates of the measurement accuracy of the specified parameters of the non-stationary signal components were obtained using the method of simulation modeling. Measurement methods based on the short-time Fourier transform and the proposed method with local adaptive matching filtering of signal components in the frequency domain in the time-sliding observation window were studied. Adjustment of matched filters is performed separately for each component of the signal, returning to the time domain and taking into account the filter settings in the previous time window. The simulation method is used for the signal model consisting of three components. The first two components are the frequency modulated harmonic ones and the last is harmonic with constant frequency. The amplitudes of components and additive Gaussian noise variance were variated to study the influence of signal-to-noise ratio on the accuracy of measurements. Estimates of the experimental standard deviation of instantaneous frequencies and current phase measurements were obtained by comparing them with their known dependencies. The frequency laws of non-stationary signal components were chosen to be harmonic, which also allowed us to evaluate the influence of the nonlinearity of the instantaneous frequency change on the measurement accuracy. The results of differential phase measurements between two measurement channels are obtained to illustrate the quality of such ones for multi-component non-stationary signals situations. The results of this study may be useful for the development of imaging methods in inverse synthetic aperture radars (ISAR) and interferometric ISAR.
- 20 December 2019
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- Vol. - (2(15)) , 57-66
3D POSITION MEASUREMENT OF TARGET'S SCATTERRERS IN INTERFEROMETRIC ISAR FOR SQUINT MODEL
- 20 December 2019
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- Vol. - (2(15)) , 57-66
3D POSITION MEASUREMENT OF TARGET'S SCATTERRERS IN INTERFEROMETRIC ISAR FOR SQUINT MODEL
- Open Access
- 25 December 2017
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- Vol. - (2(11)) , 58-64
3D POSITION MEASUREMENT SIMULATION OF AIR TARGET'S SCATTERRERS IN INTERFEROMETRIC ISAR
If one introduces an additional antenna spaced apart in height in inverse synthetic aperture radar (ISAR) it is possible to carry out an interferometric measurement of the scatterers’ heights. The theoretical relation for estimating the accuracy of the scatterer height measurement is obtained. A simulation model for obtaining the three-dimensional radar images (RI) of air objects in interferometric ISAR was developed. The comparison of the scatterer height measurements accuracy by theoretical relation and the results of simulation at different SNRs are performed В РЛС с инверсным синтезированием апертуры при введении дополнительной антенны разнесенной по высоте существует принципиальная возможность применения фазового метода для измерений высоты блестящих точек (БТ). Получено теоретическое соотношение для оценки точности измерений высоты БТ. Разработана имитационная модель восстановления трехмерных радиоизображений воздушных объектов в РЛС с ИСА и применении фазового метода измерений. Выполнено сравнение точности измерений высоты БТ по теоретическим соотношением и по результатам имитационного моделирования при различных отношениях сигнал-шум В РЛС з інверсним синтезуванням апертури (ІСА) при введенні додаткової антени рознесеної за висотою існує принципова можливість застосування фазового метода для вимірювань висоти блискучих точок (БТ). Отримане теоретичне співвідношення для оцінювання точності вимірювань висоти БТ. Розроблена імітаційна модель відновлення тривимірних радіозображень (РЗ) повітряних об’єктів в РЛС з ІСА із застосуванням фазового метода вимірювань. Виконане порівняння точності вимірювань висоти БТ за теоретичним співвідношенням та за результатами імітаційного моделювання при різних відношеннях сигнал-шум
- 25 December 2017
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- Vol. - (2(11)) , 58-64
Open Access3D POSITION MEASUREMENT SIMULATION OF AIR TARGET'S SCATTERRERS IN INTERFEROMETRIC ISAR
If one introduces an additional antenna spaced apart in height in inverse synthetic aperture radar (ISAR) it is possible to carry out an interferometric measurement of the scatterers’ heights. The theoretical relation for estimating the accuracy of the scatterer height measurement is obtained. A simulation model for obtaining the three-dimensional radar images (RI) of air objects in interferometric ISAR was developed. The comparison of the scatterer height measurements accuracy by theoretical relation and the results of simulation at different SNRs are performed В РЛС с инверсным синтезированием апертуры при введении дополнительной антенны разнесенной по высоте существует принципиальная возможность применения фазового метода для измерений высоты блестящих точек (БТ). Получено теоретическое соотношение для оценки точности измерений высоты БТ. Разработана имитационная модель восстановления трехмерных радиоизображений воздушных объектов в РЛС с ИСА и применении фазового метода измерений. Выполнено сравнение точности измерений высоты БТ по теоретическим соотношением и по результатам имитационного моделирования при различных отношениях сигнал-шум В РЛС з інверсним синтезуванням апертури (ІСА) при введенні додаткової антени рознесеної за висотою існує принципова можливість застосування фазового метода для вимірювань висоти блискучих точок (БТ). Отримане теоретичне співвідношення для оцінювання точності вимірювань висоти БТ. Розроблена імітаційна модель відновлення тривимірних радіозображень (РЗ) повітряних об’єктів в РЛС з ІСА із застосуванням фазового метода вимірювань. Виконане порівняння точності вимірювань висоти БТ за теоретичним співвідношенням та за результатами імітаційного моделювання при різних відношеннях сигнал-шум
- Open Access
- 25 December 2017
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (4 (90)) , 11-18
Development of the method for dynamic regularization of selected estimates in the correlation matrices of observations
Development of the method for dynamic regularization of selected estimates in the correlation matrices of observations
- 25 December 2017
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (4 (90)) , 11-18
Open AccessDevelopment of the method for dynamic regularization of selected estimates in the correlation matrices of observations
Development of the method for dynamic regularization of selected estimates in the correlation matrices of observations
- 26 June 2017
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- Vol. - (1(10))
INFLUENCE ASSESSMENT OF DESTABILIZING FACTORS ON THE PHASE DIFFERENCE MEASUREMENT ACCURACY OF RELEVANT HARMONICS IN TWO SIGNALS
- 26 June 2017
- Published by State University of Intelligent Technologies and Telecommunications in Key Title: Zbìrnik Naukovih Pracʹ Odesʹkoï Deržavnoï Akademìï Tehnìčnogo Regulûvannâ ta âkostì
- Vol. - (1(10))
INFLUENCE ASSESSMENT OF DESTABILIZING FACTORS ON THE PHASE DIFFERENCE MEASUREMENT ACCURACY OF RELEVANT HARMONICS IN TWO SIGNALS