IPImperio Anel Perales-Martínez

Imperio Anel Perales-Martínez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Imperio Anel Perales-Martínez has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Exploring the Impact Response of Brachistochrone Lattice Structures: Insights from Experimental and Mathematical Modeling

    by Parisa Majari, Luis Manuel Palacios-Pineda, Alex Elías-Zúñiga, Daniel Olvera-Trejo, Oscar Martínez-Romero, Jorge A. Estrada-Diaz, Imperio A. Perales-Martínez

    This study investigates the compression and impact responses of three brachistochrone-inspired lattice topologies, namely, Gyroid, Body-Centered Cubic (BCC), and Interconnected Wavelet Packet (IWP), fabricated by additive manufacturing using Elastic 50A Resin V2. Quasi-static compression tests were performed to characterize the force–displacement response of each topology, and drop-weight tests were conducted to measure the corresponding acceleration histories under impact loading. Based on the compression data, two restoring-force descriptions were evaluated for dynamic prediction: a fractal dynamic model with polynomial restoring force and the Equivalent Energy Spring Model (EESM). The results show that lattice topology strongly affects deformation mode, compressive stability, and energy absorption. The B-IWP lattice exhibited the highest energy-absorption capacity but also showed greater susceptibility to buckling, whereas the B-BCC topology provided a more balanced combination of structural stability and impact-mitigation capability. Comparison with the experimental impact responses showed that both modeling approaches reproduced the main features of the measured acceleration histories, while the EESM generally provided better agreement with the experimental data. These findings demonstrate that compression-derived restoring-force models provide an effective framework for predicting the impact behavior of brachistochrone-inspired lattices and support their design for protective packaging and other impact-critical applications.

  • Open Access

    Enhanced Mechanical Performance of SLM-Printed Inconel 718 Lattice Structures Through Heat Treatments

    by María J. Briones-Montemayor, Rigoberto Guzmán-Nogales, Parisa Majari, Jorge A. Estrada-Díaz, Alex Elías-Zúñiga, Daniel Olvera-Trejo, Oscar Martínez-Romero, Imperio A. Perales-Martínez

    Selective laser melting (SLM) allows the production of complex lattice structures with tunable mechanical properties. This study proposes an integrated approach to enhance the mechanical properties of Inconel 718 (IN718) lightweight structures by applying distinct heat treatment protocols and tailoring key printing parameters. Four lattice geometries—body-centered cube (BCC), diamond, inverse woodpile (IWP), and gyroid—were selected for evaluation. Three heat treatment protocols were applied to assess their effect on mechanical behavior. Additionally, the influence of key SLM parameters such as laser power, scan speed, hatch spacing, and layer thickness on structural performance was investigated. By combining process tailoring and post-processing strategies, this work demonstrates a method to improve the mechanical response of complex IN718 lattices. The results highlight significant improvements in yield strength and energy absorption for high-performance applications in aerospace and automotive engineering.


  • Open Access

    Antibacterial Crosslinker for Ternary PCL-Reinforced Hydrogels Based on Chitosan, Polyvinyl Alcohol, and Gelatin for Tissue Engineering

    by Karina Del Angel-Sánchez, Ana Victoria Treviño-Pacheco, Imperio Anel Perales-Martínez, Oscar Martínez-Romero, Daniel Olvera-Trejo, Alex Elías-Zúñiga

    Current hydrogels used for cartilage tissue engineering often lack the mechanical strength and structural integrity required to mimic native human cartilage. This study addresses this limitation by developing reinforced hydrogels based on a ternary polymer blend of poly(vinyl) alcohol (PVA), gelatin (GL), and chitosan (CH), with gentamicin sulfate (GS) as an antimicrobial agent and a crosslinker. The hydrogels were produced using two crosslinking methods, the freeze/thaw and heated cycles, and reinforced with forcespun polycaprolactone (PCL) nanofiber to improve mechanical performance. Chemical characterization revealed that GS forms weak hydrogen bonds with the ternary polymers, leading to esterification with PVA, and covalent bonds are formed as the result of the free amino group (-NH2) of chitosan that reacts with the carboxylic acid group (-COOH) of gelatin. SEM images help us to see how the hydrogels are reinforced with polycaprolactone (PCL) fibers produced via force spinning technology, while mechanical properties were evaluated via uniaxial tensile and compressive tests. Water retention measurements were performed to examine the crosslinking process’s influence on the hydrogel’s water retention, while the hydrogel surface roughness was obtained via confocal microscopy images. A constitutive model based on non-Gaussian strain energy density was introduced to predict experimental mechanical behavior data of the hydrogel, considering a non-monotonous softening function. Loading and unloading tests demonstrated that GS enhanced crosslinking without compromising water retention or biocompatibility because of the reaction between the free amino group of CH and the carboxylic group of gelatin. The PCL-reinforced PVA/GL/CH hydrogel shows strong potential for cartilage repair and tissue engineering applications.


  • Open Access

    Study on the stiffness and damping properties of magnetorheological elastomers subjected to biaxial loads and a magnetic field

    by J. Luis Gomez-Color, Luis M. Palacios-Pineda, Imperio A. Perales-Martínez, Oscar Martínez-Romero, Daniel Olvera-Trejo, Claudia A. Ramírez-Herrera, Karina Del Ángel Sánchez, Alex Elías-Zúñiga


  • Open Access

    Enhanced Lightweight Structures Through Brachistochrone-Inspired Lattice Design

    by Parisa Majari, Daniel Olvera-Trejo, Jorge A. Estrada-Díaz, Alex Elías-Zúñiga, Oscar Martinez-Romero, Claudia A. Ramírez-Herrera, Imperio Anel Perales-Martínez

    Lattice structures offer unique mechanical properties and versatility in engineering applications, yet existing designs often struggle to balance performance and material efficiency. This study introduces the brachistochrone curve as a novel framework for optimizing lattice geometries, enhancing mechanical behavior while minimizing material usage. Using finite element simulations and compressive testing of 3D-printed samples, we analyzed the mechanical response of brachistochrone-based (B-) and standard lattice structures (diamond, IWP, gyroid, and BCC). We investigated the scaling behavior of the volume-to-surface area ratio, incorporated fractal dimension analysis, and compared experimental and numerical results to evaluate the performance of B-lattices versus standard designs (S-). Our findings indicate that brachistochrone-inspired lattices enhance mechanical efficiency, enabling the design of lightweight, high-strength components with sustainable material use. Experimental results suggest that B-gyroid lattices exhibit lower stiffness than S-gyroid lattices under small displacements, highlighting their potential for energy absorption applications.


  • Open Access

    A Multiscale Fractal Approach for Determining Cushioning Curves of Low-Density Polymer Foams

    by Mariela C. Bravo-Sánchez, Luis M. Palacios-Pineda, José L. Gómez-Color, Oscar Martínez-Romero, Imperio A. Perales-Martínez, Daniel Olvera-Trejo, Jorge A. Estrada-Díaz, Alex Elías-Zúñiga

    This study investigates the impact response of polymer foams commonly used in protective packaging, considering the fractal nature of their material microstructure. The research begins with static material characterization and impact tests on two low-density polyethylene foams. To capture the multiscale nature of the dynamic response behavior of two low-density foams to sustain impact loads, fractional differential equations of motion are used to qualitatively and quantitatively describe the dynamic response behavior, assuming restoring forces for each foam characterized, respectively, by a polynomial of heptic degree and by a trigonometric tangential function. A two-scale transform is employed to solve the mathematical model and predict the material’s behavior under impact loads, accounting for the fractal structure of the material’s molecular configuration. To assess the accuracy of the mathematical model, we performed impact tests considering eight dropping heights and two plate weights. We found good predictions from the mathematical models compared to experimental data when the fractal derivatives were between 1.86 and 1.9, depending on the cushioning material used. The accuracy of the theoretical predictions achieved using fractal calculus elucidates how to predict multiscale phenomena associated with foam heterogeneity across space, density, and average pore size, which influence the foam chain’s molecular motion during impact loading conditions.


  • Open Access

    Homogeneous oriented magnetic field for developing biaxial fractal-like magnetorheological materials

    by Luis M. Palacios-Pineda, J. Luis Gómez-Color, Enrique Melgoza-Vázquez, Imperio A. Perales-Martínez, Jorge A. Estrada-Díaz, Oscar Martínez-Romero, Alex Elías-Zúñiga


  • EXPLORING INSECTS FREE FLIGHT: ENHANCING THE DIPTERAN FLIGHT MODEL TO INCLUDE FRACTAL EFFECTS

    by Alex Elías-Zúñiga, Oscar Martínez-Romero, Daniel Olvera-Trejo, Imperio Anel Perales-Martínez, Luis Manuel Palacios-Pineda

    This paper advances fundamental knowledge of how environmental conditions and physical phenomena at different scales can be included in the differential equation that models the flight dynamics of dipteran insects. The insect’s anatomical capability of modifying their mass inertia and flapping-wing damping properties during flight are included by modeling inertia and damping forces with fractal derivatives. An expression for calculating fractal dimension linked to the temporal distribution of non-geometric quantities related to atmospheric processes such as turbulence flow is introduced using, for the first time ever, the two-scale fractal dimension definition and adopting the flow energy spectrum of eddies that occur at large and small scales. The applicability of the derived expression is illustrated with the prediction of the fractal dimension observed in turbulent flows. Then, the two-scale fractal dimension transform is used to re-write the dipteran flight equation of motion in equivalent form to derive its approximate solution using harmonic balance and homotopy perturbation methods. Numerical predictions computed from the derived approximate solutions allow to elucidate how insects and animals could adapt to flight under different environmental conditions.


  • THE FRACTAL RHEOLOGY OF MAGNETORHEOLOGICAL ELASTOMERS DESCRIBED THROUGH THE MODIFIED ZENER MODEL AND THE COLE–COLE PLOT

    by Luis M. Palacios-Pineda, Alex Elías-Zúñiga, I. A. Perales-Martínez, Óscar Martínez-Romero, Daniel Olvera-Trejo

    The main objective of this study focuses on using, for the first time, the Cole–Cole semilogarithmic fractal plot to study the fractal rheological behavior of magnetorheological elastomer materials using the fractional Zener model. Experimental data and theoretical results show that the Cole–Cole semilogarithmic fractal plot predicts the Zener mathematical model’s material parameters. This paper elucidates the benefits of using Cole–Cole semilogarithmic fractal plots to accurately predict material rheological properties of composite elastomer reinforced with nano or microiron particles observed during experimental tests.


  • Open Access

    Magnetic and Viscoelastic Response of Magnetorheological Elastomers Based on a Combination of Iron Nano- and Microparticles

    by Imperio Anel Perales-Martínez, Luis Manuel Palacios-Pineda, Alex Elías-Zúñiga, Daniel Olvera-Trejo, Karina Del Ángel-Sánchez, Isidro Cruz-Cruz, Claudia Angélica Ramírez-Herrera, Oscar Martínez-Romero

    In this paper, we discuss the creation of a hybrid magnetorheological elastomer that combines nano- and microparticles. The mixture contained 45 wt.% fillers, with combinations of either 0% nanoparticles and 100% microparticles or 25% nanoparticles and 75% microparticles. TGA and FTIR testing confirmed the materials’ thermal and chemical stability, while an SEM analysis determined the particles’ size and morphology. XRD results were used to determine the crystal size of both nano- and microparticles. The addition of reinforcing particles, particularly nanoparticles, enhanced the stiffness of the composite materials studied, but their overall strength was only minimally affected. The computed interaction parameter relative to the volume fraction was consistent with the previous literature. Furthermore, the study observed a magnetic response increment in composite materials reinforced with nanoparticles above 30 Hz. The isotropic material containing only microparticles had a lower storage modulus than the isotropic sample with nanoparticles without a magnetic field. However, when a magnetic field was applied, the material with only microparticles exhibited a higher storage modulus than the samples with nanoparticles.