Khalil Khalili
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Khalil Khalili has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
Amir Ashrafi
Department of Mechanical Engineering, University of Birjand
6 shared publications- Mohsen Heydari
Department of Food Industry Machineries Research Institute of Food Science and Technology Mashhad Iran
6 shared publications - Abolfazl Foorginejad
Department of Mechanical Engineering, Birjand University of Technology, Birjand, Iran
3 shared publications Seyed Yousef Ahmadi-Brooghani
3 shared publicationsA. Ashrafi
Department of Mechanical engineering, University of Birjand, Birjand, Iran
2 shared publicationsM. Khodadadi
Department of Mechanical engineering, University of Birjand, Birjand, Iran
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (1) , 176-191
Multi-objective Optimization of Biomedical Scaffold Geometries for Mechanical and Porous Performance Enhancement
Scaffold geometry plays a crucial role in determining its mechanical strength, as changes in shape can significantly impact its properties. Additionally, porosity, which varies with geometry, weakens the scaffold's mechanical performance. This study investigates the influence of scaffold geometry on mechanical properties and porosity in biomedical applications. Seven distinct geometries were designed using identical materials and fabricated through 3D printing. The scaffolds underwent compressive strength testing and finite element simulations to evaluate their load-bearing capacity and porosity. Among the designs, hexagonal and circular geometries demonstrated superior mechanical performance and controlled porosity. A total of 81 hexagonal and 27 circular scaffold samples were analyzed using Abaqus software. Initially, Response Surface Methodology (RSM) was employed to model the relationship between pressure and porosity, identifying the optimal design space with high predictive accuracy (R² > 96%). Then, a multi-objective optimization process using the Multi-Objective Particle Swarm Optimization (MOPSO) algorithm was implemented. The results revealed a Pareto front for each geometry, enabling the selection of scaffolds with specific load-bearing capacities and maximum porosity levels. Validation tests showed a mean error of 3.4% for circular geometries and 3.53% for hexagonal geometries, demonstrating the reliability of the simulation and optimization methods. This comprehensive approach integrates experimental, simulation, and optimization techniques, offering a robust framework for designing high-performance scaffolds tailored to biomedical needs.
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (1) , 176-191
Open AccessMulti-objective Optimization of Biomedical Scaffold Geometries for Mechanical and Porous Performance Enhancement
Scaffold geometry plays a crucial role in determining its mechanical strength, as changes in shape can significantly impact its properties. Additionally, porosity, which varies with geometry, weakens the scaffold's mechanical performance. This study investigates the influence of scaffold geometry on mechanical properties and porosity in biomedical applications. Seven distinct geometries were designed using identical materials and fabricated through 3D printing. The scaffolds underwent compressive strength testing and finite element simulations to evaluate their load-bearing capacity and porosity. Among the designs, hexagonal and circular geometries demonstrated superior mechanical performance and controlled porosity. A total of 81 hexagonal and 27 circular scaffold samples were analyzed using Abaqus software. Initially, Response Surface Methodology (RSM) was employed to model the relationship between pressure and porosity, identifying the optimal design space with high predictive accuracy (R² > 96%). Then, a multi-objective optimization process using the Multi-Objective Particle Swarm Optimization (MOPSO) algorithm was implemented. The results revealed a Pareto front for each geometry, enabling the selection of scaffolds with specific load-bearing capacities and maximum porosity levels. Validation tests showed a mean error of 3.4% for circular geometries and 3.53% for hexagonal geometries, demonstrating the reliability of the simulation and optimization methods. This comprehensive approach integrates experimental, simulation, and optimization techniques, offering a robust framework for designing high-performance scaffolds tailored to biomedical needs.
- 1 March 2023
- Published by Canadian Science Publishing in Transactions of the Canadian Society for Mechanical Engineering
- Vol. 47 (1) , 43-53
Single- and multi-objective optimization of internal gear flowforming process based on increasing tooth height and reducing force and built-up edge
Flowforming is an incremental metal forming process in which deformation occurs gradually between the roller and mandrel. This process has been widely used for manufacturing of high-precision tubular parts and seamless tubes. Internal gear flowforming process is a new method for manufacturing an internal gear that requires no additional machining process. In this study, the design of experiment method and regression analysis were used to obtain tooth height, force, and built-up edge as functions of the effective parameters, including feed rate, roller diameter, attack angle, and thickness reduction percentage. Next, the simulated annealing and genetic algorithm were used for, respectively, single- and multi-objective optimization of the obtained functions. The goal of optimization was to reduce the force and built-up edge and increase the tooth height. In single-objective optimization, the maximum tooth height was 0.576 mm, the minimum force was 1606.63 N, and the minimum built-up edge was 0.448 mm. In multi-objective optimization, an optimal set of tooth height, force, and built-up edge (Pareto front) is obtained.
- 1 March 2023
- Published by Canadian Science Publishing in Transactions of the Canadian Society for Mechanical Engineering
- Vol. 47 (1) , 43-53
Single- and multi-objective optimization of internal gear flowforming process based on increasing tooth height and reducing force and built-up edge
Flowforming is an incremental metal forming process in which deformation occurs gradually between the roller and mandrel. This process has been widely used for manufacturing of high-precision tubular parts and seamless tubes. Internal gear flowforming process is a new method for manufacturing an internal gear that requires no additional machining process. In this study, the design of experiment method and regression analysis were used to obtain tooth height, force, and built-up edge as functions of the effective parameters, including feed rate, roller diameter, attack angle, and thickness reduction percentage. Next, the simulated annealing and genetic algorithm were used for, respectively, single- and multi-objective optimization of the obtained functions. The goal of optimization was to reduce the force and built-up edge and increase the tooth height. In single-objective optimization, the maximum tooth height was 0.576 mm, the minimum force was 1606.63 N, and the minimum built-up edge was 0.448 mm. In multi-objective optimization, an optimal set of tooth height, force, and built-up edge (Pareto front) is obtained.
- 20 January 2023
- Published by Springer Nature in Experimental Techniques
- Vol. 47 (6) , 1169-1182
Investigation of Hardness, Microstructure, and Process Temperature in the Internal Gear Flow-Forming Process
- 20 January 2023
- Published by Springer Nature in Experimental Techniques
- Vol. 47 (6) , 1169-1182
Investigation of Hardness, Microstructure, and Process Temperature in the Internal Gear Flow-Forming Process
- 1 January 2023
- Published by Begell House Inc. Publishers
- p. 197-205
ENHANCING VISION DATA USING PRIOR KNOWLEDGE
A significant problem which arises when assembling or reworking surface mount devices is that of linear and angular misalignment between the device and its mating part on the printed circuit board. With the expectation that devices will get smaller and of even finer pitch, people will not be capable of this work and for automation the problem of alignment will become more severe. The manufacture of the device and the PCB is such that dead reckoning is not adequate. Usually a vision system is used to determine the position of the surface mount pads relative to the manipulators datum and to cross relate this information to achieve a successful assembly. This is done by looking at discrete pads on the device and fiducial marks on the PCB. The problem which arises is that either the whole picture is viewed and the resolution obtained using even the best vision systems is poor or parts of the scene are viewed individually where the resolution is better but where the necessary manipulator motion can introduce errors. The paper describes various techniques which have been tried to improve the resolution of a vision system based on the known and plentiful knowledge about the relative locations of the assembly features.
- 1 January 2023
- Published by Begell House Inc. Publishers
- p. 197-205
ENHANCING VISION DATA USING PRIOR KNOWLEDGE
A significant problem which arises when assembling or reworking surface mount devices is that of linear and angular misalignment between the device and its mating part on the printed circuit board. With the expectation that devices will get smaller and of even finer pitch, people will not be capable of this work and for automation the problem of alignment will become more severe. The manufacture of the device and the PCB is such that dead reckoning is not adequate. Usually a vision system is used to determine the position of the surface mount pads relative to the manipulators datum and to cross relate this information to achieve a successful assembly. This is done by looking at discrete pads on the device and fiducial marks on the PCB. The problem which arises is that either the whole picture is viewed and the resolution obtained using even the best vision systems is poor or parts of the scene are viewed individually where the resolution is better but where the necessary manipulator motion can introduce errors. The paper describes various techniques which have been tried to improve the resolution of a vision system based on the known and plentiful knowledge about the relative locations of the assembly features.
- 29 October 2022
- Published by Elsevier in Materials Today Communications
- Vol. 33, 104803
Influence of T6 heat-treating and over-ageing on out-of-phase thermo-mechanical fatigue behaviors of Al-Si-Cu alloy
- 29 October 2022
- Published by Elsevier in Materials Today Communications
- Vol. 33, 104803
Influence of T6 heat-treating and over-ageing on out-of-phase thermo-mechanical fatigue behaviors of Al-Si-Cu alloy
- 14 May 2022
- Published by Springer Nature in Sādhanā
- Vol. 47 (2) , 1-11
Optimizing parameters effective on built-up edge in internal gear flowforming process
- 14 May 2022
- Published by Springer Nature in Sādhanā
- Vol. 47 (2) , 1-11
Optimizing parameters effective on built-up edge in internal gear flowforming process
- Open Access
- 1 January 2021
- Vol. 8 (1) , 14-25
Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force
- 1 January 2021
- Vol. 8 (1) , 14-25
Open AccessStudy on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force
- 1 December 2020
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 33 (12) , 2563-2571
Studying the Effective Parameters on Teeth Height in Internal Gear Flowforming Process
The flowforming process is a chipless metal forming process that is used to produce precise thin walled tubes. Manufacturing of internal gears using flowforming process is a difficult-to-achieve, but very interesting process in which the gear may be produced without the need for high forming forces and r high tooling cost. In this study, manufacturing of internal gears using flowforming process is studied. The process has been numerically analyzed and simulated. The plastic behavior of the material, and friction conditions were determined using tensile and friction tests, respectively. Several controlled test were performed to evaluate the validity of simulation results. A comparison of simulation and experimental results indicates very good agreement. Once the simulation is verified, the effects of roller diameter, thickness reduction percentage, feed rate and attack angle on tooth height were obtained using design of experiments (DOE) procedure. According to DOE results, attack angle (α), thickness reduction percentage (T), interaction between roller diameter and attack angle (D×α), and interaction between roller diameter and feed rate (D×f) are the most significant parameters affecting the tooth height. The tooth height increases with increasing the roller diameter and thickness reduction, but decreases with increasing the feed rate and attack angle.
- 1 December 2020
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 33 (12) , 2563-2571
Studying the Effective Parameters on Teeth Height in Internal Gear Flowforming Process
The flowforming process is a chipless metal forming process that is used to produce precise thin walled tubes. Manufacturing of internal gears using flowforming process is a difficult-to-achieve, but very interesting process in which the gear may be produced without the need for high forming forces and r high tooling cost. In this study, manufacturing of internal gears using flowforming process is studied. The process has been numerically analyzed and simulated. The plastic behavior of the material, and friction conditions were determined using tensile and friction tests, respectively. Several controlled test were performed to evaluate the validity of simulation results. A comparison of simulation and experimental results indicates very good agreement. Once the simulation is verified, the effects of roller diameter, thickness reduction percentage, feed rate and attack angle on tooth height were obtained using design of experiments (DOE) procedure. According to DOE results, attack angle (α), thickness reduction percentage (T), interaction between roller diameter and attack angle (D×α), and interaction between roller diameter and feed rate (D×f) are the most significant parameters affecting the tooth height. The tooth height increases with increasing the roller diameter and thickness reduction, but decreases with increasing the feed rate and attack angle.
- 26 November 2020
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Mechanical Engineering
- Vol. 45 (1) , 181-196
Two-Point Incremental Forming of Metal–Polymer Three-Layer Sheets
- 26 November 2020
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Mechanical Engineering
- Vol. 45 (1) , 181-196
Two-Point Incremental Forming of Metal–Polymer Three-Layer Sheets
- 19 November 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 112 (1-2) , 375-385
Theoretical and experimental evaluation of no-slip feeding condition in ECAP-Conform of a square-section metallic rod
- 19 November 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 112 (1-2) , 375-385
Theoretical and experimental evaluation of no-slip feeding condition in ECAP-Conform of a square-section metallic rod