Enric Sanchez-Sanchez

Recent environmental policies have led academic, industrial, and governmental stakeholders to plan scenarios with a high share of renewable energy sources (RES), to ensure that future energy systems, composed mostly of RES, can remain stable, match the demand during seasonal variations and are economically feasible. This article considers different energy scenarios to obtain various options in terms of size, generation technologies, and grid configuration. The scenarios are studied in the POSYTYF project and are quantified through an optimization‐based algorithm, where the test grids topologies are based on specific locations in Europe, and real data related to the availability of RES, as well as the demand. Different RES technologies are considered to meet requirements of grid integration of renewables at different horizons of time, up to 100% in the most futuristic case. The optimization algorithm is applied to three scenarios. It is shown that solar photovoltaic (PV) and wind can provide the renewable backbone, but they lack flexibility to achieve a very high share in the energy mix. Solar thermal and pumped hydro become important to cover the last range of integration, as they provide high flexibility, which is crucial for high share, but they are expensive for low share.

This work focuses on grid-forming (GFM) control of Interconnecting Power Converters (IPCs) that are used to interconnect multiple HVAC and HVDC subgrids to form a grid of grids. We introduce the concept of dual-port GFM control that leverages the ability of Modular Multilevel Converters (MMCs) to simultaneously form its AC and DC terminal voltage and present two dual-port GFM MMC controls. We provide analytical results and high-fidelity simulations that demonstrate that (i) dual-port GFM control is more resilient to contingencies (i.e., line and generator outages) than state-of-the-art single-port GFM control, and (ii) unlike single-port GFM control, dual-port GFM control does not require assigning grid-forming and grid-following (GFL) roles to the IPC terminals in grids of grids. Finally, we provide an in-depth discussion and comparison of single-port GFM control and the proposed dual-port GFM controls.

Recent environmental policies have led many academic, industrial and governmental stakeholders to design and plan scenarios with very high share of renewable energy sources (RES). New system elements such as High-voltage Direct Current (HVDC) transmission, Microgrids, Virtual Power Plants (VPP) and Dynamic Virtual Power Plants (DVPP) are being increasingly studied with respect to their contribution to integrate future RES plants in the main grid. Several future scenarios are being analysed for each system and region, to ensure that the future energy systems, composed mostly of RES, can remain stable, match the demand during the seasonal variations across the year and are economically feasible. In this article, different types of energy scenarios are considered to obtain a range of options in terms of size, renewable generation technologies, and electrical network configuration. The scenarios were studied in the context of the POSYTYF project and were quantified through an optimization-based algorithm, using specific locations in Europe, and real data related to the availability of different RES, as well as the demand. It has been shown that photovoltaic (PV) and wind generation can provide the renewable backbone but they lack the flexibility needed to achieve a very high share in the energy mix. Other technologies, such as solar thermal and pumped hydro, become important to cover the last range of integration, as they provide a high flexibility, which is crucial for high share.

The concept of segmented AC power systems interconnected by means of HVDC is becoming more and more significant for many cases worldwide. Such systems already exist and will become more complex with the increasing emergence of HVDC links and grids. The concept of a grid composed of multiple subgrids motivates the need to define the governing roles of Interconnecting Power Converters (IPC) which connect the different subgrids. Such IPC can have various operation modes which are presented and analyzed in this paper. In addition, the principles of operation needed for each individual subgrid and for the overall system are introduced and discussed. The resulting fundamental equations are outlined and combined in a power flow formulation of the overall system. A simple case study is presented to illustrate the power flow formulation in a grid of multiple subgrids, also introducing example dynamic simulations of transitions between different operating points.

This paper investigates the dynamic behavior of a modular multi-level converter (MMC)-based HVDC link. An overall state-space model is developed to identify the system critical modes, considering the dynamics of the master MMC and slave MMC, their control systems, and the HVDC cable. Complementary to the state-space model, an impedance-based model is also derived to obtain the minimum phase margin (PM) of the system. In addition, a relative gain array (RGA) analysis is conducted to quantify the level of interactions among the control systems of master and slave MMCs and their impacts on stability. Finally, with the help of the results obtained from the system analysis (eigenvalue, phase margin, sensitivity, and RGA), the system dynamic performance is improved.

This article addresses the design of the DC voltage droop control in modular multilevel converter (MMC)-based multiterminal HVDC grids. First, two energy-based control approaches, namely classic and cross control, are explored for the implementation of the voltage-power droop controller. The cross control, as the better solution for droop implementation, is further improved, making it more robust against disturbances. Then, a methodology is derived to select the droop gain combinations considering the AC grid, DC grid and MMC dynamics and their limitations. The methodology is based on a linear analysis to identify the valid droop gains which comply with the limits imposed on: the transient power sharing among MMCs, the DC grid voltage, the MMC AC and DC currents, the total MMC stored energy, and the stability margin of the complete multiterminal HVDC grid. Finally, time-domain simulations are conducted using the nonlinear model to validate the dynamic performance of the selected droop combinations obtained from the suggested methodology.

With an increasing number of renewable energy resources being integrated into the power system through power electronics, conventional power plants based on large synchronous machines tend to be reduced in the upcoming future. With the Modular Multilevel Converter as the state-of-the-art power electronics solution for power systems, it will be necessary to operate some of these converters in grid-forming mode, in order to either preserve the stability and robustness of the ac grid or as the only solution to generate the ac grid in cases with no available synchronous generation. This paper aims to understand how the internal energy control of the MMC can be used to effectively mitigate the propagation of ac power disturbances to the dc side, thanks to its buffering capability. Different energy control structures are explored, and a comprehensive discussion and comparison among them is provided, including stability analysis, transient performance and tuning guidelines. Simplified and linear models are used to address the analysis, whereas detailed non-linear models implemented in MATLAB Simulink are used to verify the results via time-domain simulations.