Tetsuo Tsujioka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tetsuo Tsujioka has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Kazuhide Takeuchi
Graduate School of Medicine, Osaka City University, 1-5-17 Asahimachi, Abeno-ku, 545-0051, Japan
6 shared publicationsShigeyoshi Nakajima
Graduate School of Engineering, Osaka City University, 3-3-138 Sugimoto, Sumiyoshi-ku, 558-8585, Japan
6 shared publicationsTadayuki Inoue
Graduate School of Engineering, Osaka City University, 3-3-138 Sugimoto, Sumiyoshi-ku, 558-8585, Japan
6 shared publicationsHajime Nakamura
5 shared publicationsHiroto Sugano
Graduate School of Engineering, Osaka City University, 3-3-138 Sugimoto, Sumiyoshi-ku, 558-8585, Japan
4 shared publicationsMasashi Murata
Faculty of Science and Technology, Ryukoku University, Otsu, Japan
4 shared publications
Latest Publications
- 1 January 2016
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Thermal Engineering Conference
- Vol. 2016, A232
Humidity measurement method over boiling point temperature based on principle of psychrometer
- 1 January 2016
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Thermal Engineering Conference
- Vol. 2016, A232
Humidity measurement method over boiling point temperature based on principle of psychrometer
- 1 March 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 2326828X,p. 1-4
Development of a patient remote monitoring system in a hospital
We have developed a patient monitoring system in a hospital which can remotely and continuously monitor the state of a patient in a room, such as the electrocardiogram (ECG), body surface temperature and three-dimensional (3D) acceleration, with a wireless vital sensor. In this paper, we show the detail on the elements of the system, namely, the capability of the wireless vital sensor, diversity reception technique and triage engine which can automatically send an urgent message from the room to a nurse station as well as a medical doctor when it detects the occurrence of an urgent event on the patient.
- 1 March 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 2326828X,p. 1-4
Development of a patient remote monitoring system in a hospital
We have developed a patient monitoring system in a hospital which can remotely and continuously monitor the state of a patient in a room, such as the electrocardiogram (ECG), body surface temperature and three-dimensional (3D) acceleration, with a wireless vital sensor. In this paper, we show the detail on the elements of the system, namely, the capability of the wireless vital sensor, diversity reception technique and triage engine which can automatically send an urgent message from the room to a nurse station as well as a medical doctor when it detects the occurrence of an urgent event on the patient.
- 1 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Evaluation of a wireless vital sensor for ubiquitous health monitoring systems
Vital sensor and wireless information communication technologies play important roles in providing continuous health monitoring systems. The key elements required for the vital sensor device are its simplicity and accuracy, whereas those for the wireless communication tool are its connectivity and comfortability. For a commercially available wireless vital sensor with capability of measuring three-dimensional acceleration, electrocardiogram and body surface temperature, we conducted a clinical test for evaluating its accuracy and connectivity. The result of the clinical test revealed that the accuracy of the vital sensor was almost the same as that of the Holter monitor in term of electrocardiogram recording capability, but its wireless connectivity was much lower, that is, the average data loss rate was 0.22 for the data from all the subjects with variance of 0.025. In addition to the clinical test, we conducted an experiment on improving the wireless connectivity by receiver diversity in a patient room. The experimental result revealed that the average data loss rate, which was 0.041 for the use of a single receiver, was effectively reduced to 0.0023 only for the use of two antenna receivers.
- 1 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Evaluation of a wireless vital sensor for ubiquitous health monitoring systems
Vital sensor and wireless information communication technologies play important roles in providing continuous health monitoring systems. The key elements required for the vital sensor device are its simplicity and accuracy, whereas those for the wireless communication tool are its connectivity and comfortability. For a commercially available wireless vital sensor with capability of measuring three-dimensional acceleration, electrocardiogram and body surface temperature, we conducted a clinical test for evaluating its accuracy and connectivity. The result of the clinical test revealed that the accuracy of the vital sensor was almost the same as that of the Holter monitor in term of electrocardiogram recording capability, but its wireless connectivity was much lower, that is, the average data loss rate was 0.22 for the data from all the subjects with variance of 0.025. In addition to the clinical test, we conducted an experiment on improving the wireless connectivity by receiver diversity in a patient room. The experimental result revealed that the average data loss rate, which was 0.041 for the use of a single receiver, was effectively reduced to 0.0023 only for the use of two antenna receivers.
- 1 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19437439,p. 98-102
Continuous ECG data gathering by a wireless vital sensor — Evaluation of its sensing and transmission capabilities
This paper investigates the possibility of a realtime electrocardiogram (ECG) data gathering by a wireless vital sensor in houses and hospitals. First of all, to evaluate the ECG capability, we conducted clinical tests with 67 subjects comparing 24-hour data obtained at houses between the wireless vital sensor and a Holter monitor. Secondly, to evaluate the wireless transmission capability, we conducted experiments with 8 subjects in patient rooms at a hospital. The clinical test results conclude that, as long as the sensed data are successfully received at a receiver, the wireless vital sensor has a comparable performance with the Holter ECG monitor, on the other hand, the experimental results show that the data transmission capability with a single receiver is not satisfactory for real-time continuous monitoring, but the use of three receivers can significantly improve the data transmission quality by receive diversity effect.
- 1 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19437439,p. 98-102
Continuous ECG data gathering by a wireless vital sensor — Evaluation of its sensing and transmission capabilities
This paper investigates the possibility of a realtime electrocardiogram (ECG) data gathering by a wireless vital sensor in houses and hospitals. First of all, to evaluate the ECG capability, we conducted clinical tests with 67 subjects comparing 24-hour data obtained at houses between the wireless vital sensor and a Holter monitor. Secondly, to evaluate the wireless transmission capability, we conducted experiments with 8 subjects in patient rooms at a hospital. The clinical test results conclude that, as long as the sensed data are successfully received at a receiver, the wireless vital sensor has a comparable performance with the Holter ECG monitor, on the other hand, the experimental results show that the data transmission capability with a single receiver is not satisfactory for real-time continuous monitoring, but the use of three receivers can significantly improve the data transmission quality by receive diversity effect.
- 1 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 672-675
Estimation of Human Movements from Body Acceleration Monitoring Using One Nearest Neighbor Method - Ubiquitous Health Care
We are developing an ubiquitous system for constant monitoring of human health that uses a 3D accelerometer and an electrocardiogram communicating wirelessly to a personal computer. The should provide an automatic alert whenever a person's condition indicates a risk of heart attack or other danger. We collected acceleration data and bodily movement records from our staffs and from volunteer in order to determine from the movement data what sorts of movements, such as walking or riding a bicycle, a person is engaging in. Our system is able to infer the type of human movements from the acceleration data and use this in combination with ECG data to decide whether to issue an alert. Recently, we used a threshold method for the estimating what types of movements were being detected. Then we recently improved on our movement estimates by using normalization and the one nearest neighbor method.
- 1 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 672-675
Estimation of Human Movements from Body Acceleration Monitoring Using One Nearest Neighbor Method - Ubiquitous Health Care
We are developing an ubiquitous system for constant monitoring of human health that uses a 3D accelerometer and an electrocardiogram communicating wirelessly to a personal computer. The should provide an automatic alert whenever a person's condition indicates a risk of heart attack or other danger. We collected acceleration data and bodily movement records from our staffs and from volunteer in order to determine from the movement data what sorts of movements, such as walking or riding a bicycle, a person is engaging in. Our system is able to infer the type of human movements from the acceleration data and use this in combination with ECG data to decide whether to issue an alert. Recently, we used a threshold method for the estimating what types of movements were being detected. Then we recently improved on our movement estimates by using normalization and the one nearest neighbor method.
- 1 August 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2010 (1094687X) , 2030-2033
Clinical tests and evaluations of a Wireless ECG sensor for realization of ubiquitous health care systems
This paper introduces the concept of an online medical diagnosis system for ubiquitous health care using a wireless ECG sensor. To confirm the feasibility ofthe system, we conducted clinical tests by 67 subjects with a wireless ECG sensor and a Holter ECG monitor simultaneously for comparison purpose. We made five types of evaluations such as analyses on data loss rate, burst data loss length, ECG waveforms comparison, normalized cross-correlation and heart rate variability (HRV) by RR50. The results show that, as long as the sensed data are successfully received at a receiver, the wireless ECG sensor has a comparable performance with the Holter ECG monitor.
- 1 August 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2010 (1094687X) , 2030-2033
Clinical tests and evaluations of a Wireless ECG sensor for realization of ubiquitous health care systems
This paper introduces the concept of an online medical diagnosis system for ubiquitous health care using a wireless ECG sensor. To confirm the feasibility ofthe system, we conducted clinical tests by 67 subjects with a wireless ECG sensor and a Holter ECG monitor simultaneously for comparison purpose. We made five types of evaluations such as analyses on data loss rate, burst data loss length, ECG waveforms comparison, normalized cross-correlation and heart rate variability (HRV) by RR50. The results show that, as long as the sensed data are successfully received at a receiver, the wireless ECG sensor has a comparable performance with the Holter ECG monitor.
- 1 August 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2010 (1094687X) , 348-351
A receiver diversity technique for ensuring high reliability of wireless vital data gathering in hospital rooms
Sensing and wireless technologies have made remarkable advance recently, so wireless vital sensors for medical use, which are light-weight but accurate, have been commercially available. However, because of the low reliability of the wireless data transmission, sensed vital data are often lost in the wireless channel and this is a fatal drawback of the devices for continuous monitoring of patients in hospitals. This paper investigates the effect of using multiple receivers (receiver diversity technique) on the improvement of data loss rate for wireless vital data gathering. Experiments with a wireless vital sensor in hospital rooms reveal that putting receivers to higher positions such as ceiling is advantageous and the use of three receivers can sufficiently improve the data loss rate as compared with the use of a single receiver.
- 1 August 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2010 (1094687X) , 348-351
A receiver diversity technique for ensuring high reliability of wireless vital data gathering in hospital rooms
Sensing and wireless technologies have made remarkable advance recently, so wireless vital sensors for medical use, which are light-weight but accurate, have been commercially available. However, because of the low reliability of the wireless data transmission, sensed vital data are often lost in the wireless channel and this is a fatal drawback of the devices for continuous monitoring of patients in hospitals. This paper investigates the effect of using multiple receivers (receiver diversity technique) on the improvement of data loss rate for wireless vital data gathering. Experiments with a wireless vital sensor in hospital rooms reveal that putting receivers to higher positions such as ceiling is advantageous and the use of three receivers can sufficiently improve the data loss rate as compared with the use of a single receiver.
- 1 July 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23743247,p. 1-6
Autonomous chain network formation by multi-robot rescue system with ad hoc networking
The autonomous chain network formation by multi-robot rescue system is investigated. Chain networks connecting a base station and rescue robots are essential to reconnoiter distant spaces in disaster areas. The chains must be formed to assure communications among them and must be transformed if the target of exploration changes. These formations must be executed by autonomous movements of robots from reliable viewpoints in rescue operations. As the basis of their movements, we adopt autonomous classification of robots into search robots and relay robots. They act according to the behavior algorithms of each class of robot to form chain network threading the path to the distant spaces. The rule of the classification and the behavior algorithm refer forwarding table of each robot constructed for ad hoc networking. The results of simulations show that chain networks are formed and transformed by rescue robots appropriately for their reconnaissance to distant spaces even though three spaces exist beyond different corridors stemming from the safety zone where base station is established.
- 1 July 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23743247,p. 1-6
Autonomous chain network formation by multi-robot rescue system with ad hoc networking
The autonomous chain network formation by multi-robot rescue system is investigated. Chain networks connecting a base station and rescue robots are essential to reconnoiter distant spaces in disaster areas. The chains must be formed to assure communications among them and must be transformed if the target of exploration changes. These formations must be executed by autonomous movements of robots from reliable viewpoints in rescue operations. As the basis of their movements, we adopt autonomous classification of robots into search robots and relay robots. They act according to the behavior algorithms of each class of robot to form chain network threading the path to the distant spaces. The rule of the classification and the behavior algorithm refer forwarding table of each robot constructed for ad hoc networking. The results of simulations show that chain networks are formed and transformed by rescue robots appropriately for their reconnaissance to distant spaces even though three spaces exist beyond different corridors stemming from the safety zone where base station is established.
- Open Access
- 25 March 2009
- Published by Springer Nature in EURASIP Journal on Advances in Signal Processing
- Vol. 2009 (1) , 434597
A Common Coordinates/Heading Direction Generation Method for a Robot Swarm with Only RSSI-Based Ranging
- 25 March 2009
- Published by Springer Nature in EURASIP Journal on Advances in Signal Processing
- Vol. 2009 (1) , 434597
Open AccessA Common Coordinates/Heading Direction Generation Method for a Robot Swarm with Only RSSI-Based Ranging
- Open Access
- 1 January 2009
- Published by The Institute for Research and Community Services (LPPM) ITB in ITB Journal of Information and Communication Technology
- Vol. 3 (2) , 89-108
Simulation and Noise Analysis of Multimedia Transmission in Optical CDMA Computer Networks
This paper simulates and analyzes noise of multimedia transmission in a flexible optical code division multiple access (OCDMA) computer network with different quality of service (QoS) requirements. To achieve multimedia transmission in OCDMA, we have proposed strict variable-weight optical orthogonal codes (VW-OOCs), which can guarantee the smallest correlation value of one by the optimal design. In developing multimedia transmission for computer network, a simulation tool is essential in analyzing the effectiveness of various transmissions of services. In this paper, implementation models are proposed to analyze the multimedia transmission in the representative of OCDMA computer networks by using MATLAB simulink tools. Simulation results of the models are discussed including spectrums outputs of transmitted signals, superimposed signals, received signals, and eye diagrams with and without noise. Using the proposed models, multimedia OCDMA computer network using the strict VW-OOC is practically evaluated. Furthermore, system performance is also evaluated by considering avalanche photodiode (APD) noise and thermal noise. The results show that the system performance depends on code weight, received laser power, APD noise, and thermal noise which should be considered as important parameters to design and implement multimedia transmission in OCDMA computer networks
- 1 January 2009
- Published by The Institute for Research and Community Services (LPPM) ITB in ITB Journal of Information and Communication Technology
- Vol. 3 (2) , 89-108
Open AccessSimulation and Noise Analysis of Multimedia Transmission in Optical CDMA Computer Networks
This paper simulates and analyzes noise of multimedia transmission in a flexible optical code division multiple access (OCDMA) computer network with different quality of service (QoS) requirements. To achieve multimedia transmission in OCDMA, we have proposed strict variable-weight optical orthogonal codes (VW-OOCs), which can guarantee the smallest correlation value of one by the optimal design. In developing multimedia transmission for computer network, a simulation tool is essential in analyzing the effectiveness of various transmissions of services. In this paper, implementation models are proposed to analyze the multimedia transmission in the representative of OCDMA computer networks by using MATLAB simulink tools. Simulation results of the models are discussed including spectrums outputs of transmitted signals, superimposed signals, received signals, and eye diagrams with and without noise. Using the proposed models, multimedia OCDMA computer network using the strict VW-OOC is practically evaluated. Furthermore, system performance is also evaluated by considering avalanche photodiode (APD) noise and thermal noise. The results show that the system performance depends on code weight, received laser power, APD noise, and thermal noise which should be considered as important parameters to design and implement multimedia transmission in OCDMA computer networks