Muhammad Saukani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Muhammad Saukani has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
Hung-Ming Chen
Gingen Technology Co., LTD. , Rm. 7, 10F., No. 189, Sec. 2, Keelung Rd. , Xinyi Dist
36 shared publicationsSibidou Yougbaré
Institut de Recherche en Sciences de la Santé (IRSS-DRCO)/Nanoro , 03 B.P 7192
33 shared publications- Lu-Yin Lin
National Taipei University of Technology
29 shared publications Chutima Kongvarhodom
24 shared publications- Chutima Kongvarhodom
Department of Chemical Engineering, King Mongkut’s University of Technology Thonburi, 126 Pracha-u-thit, Toong-kru, Bangkok 10140, Thailand
13 shared publications - Tsung-Rong Kuo
International Ph.D. Program in Biomedical Engineering, College of Biomedical Engineering, Taipei Medical University, Taipei, Taiwan
13 shared publications
Latest Publications
- Open Access
- 2 September 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (36) , 54704-54718
Interfacial Coupling and Reconstruction in Glycerolate-Derived Co–Mn Selenium-Treated Products for High-Performance Supercapacitors
The development of electrode materials with efficient charge transfer and abundant interfacial active sites remains a key challenge for high-performance supercapacitors. Compared with conventional inorganic precursors, glycerolate-derived materials provide tunable coordination environments and self-templated structural evolution, enabling the formation of porous architectures with abundant active interfaces after post-synthetic conversion. A bimetallic cobalt–manganese glycerolate (CoMn-G) is utilized as a precursor to construct Co–Mn-based selenium-treated products via a solvothermal selenization process, with particular emphasis on interfacial reconstruction and electronic modulation. Incorporating Mn regulates the coordination environment, resulting in a homogeneous amorphous framework with enhanced defect features. Upon selenization, a pronounced phase transformation and morphological reconstruction occur, leading to the formation of porous architectures with enriched interfacial regions. Meanwhile, strong electronic coupling between Co and Mn induces charge redistribution, facilitating improved charge transfer kinetics. As a result, the optimized CoMn–Se electrode delivers a GCD-derived specific capacitance of 1015.8 F/g at 1 A/g, while a capacitance of 927.3 F/g is obtained from CV measurements at 10 mV/s along with a reduced charge transfer resistance. When assembled into a two-electrode device with reduced graphene oxide as the negative electrode, the system achieves an energy density of 66 Wh/kg at 725 W/kg and maintains 89% capacitance retention with 99% Coulombic efficiency after 10,000 cycles. The enhanced performance is attributed to synergistic effects of bimetallic interaction and selenization-induced interfacial evolution. This work provides insights into designing glycerolate-derived materials with tailored interfacial structures and electronic properties for advanced energy storage applications.
- 2 September 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (36) , 54704-54718
Open AccessInterfacial Coupling and Reconstruction in Glycerolate-Derived Co–Mn Selenium-Treated Products for High-Performance Supercapacitors
The development of electrode materials with efficient charge transfer and abundant interfacial active sites remains a key challenge for high-performance supercapacitors. Compared with conventional inorganic precursors, glycerolate-derived materials provide tunable coordination environments and self-templated structural evolution, enabling the formation of porous architectures with abundant active interfaces after post-synthetic conversion. A bimetallic cobalt–manganese glycerolate (CoMn-G) is utilized as a precursor to construct Co–Mn-based selenium-treated products via a solvothermal selenization process, with particular emphasis on interfacial reconstruction and electronic modulation. Incorporating Mn regulates the coordination environment, resulting in a homogeneous amorphous framework with enhanced defect features. Upon selenization, a pronounced phase transformation and morphological reconstruction occur, leading to the formation of porous architectures with enriched interfacial regions. Meanwhile, strong electronic coupling between Co and Mn induces charge redistribution, facilitating improved charge transfer kinetics. As a result, the optimized CoMn–Se electrode delivers a GCD-derived specific capacitance of 1015.8 F/g at 1 A/g, while a capacitance of 927.3 F/g is obtained from CV measurements at 10 mV/s along with a reduced charge transfer resistance. When assembled into a two-electrode device with reduced graphene oxide as the negative electrode, the system achieves an energy density of 66 Wh/kg at 725 W/kg and maintains 89% capacitance retention with 99% Coulombic efficiency after 10,000 cycles. The enhanced performance is attributed to synergistic effects of bimetallic interaction and selenization-induced interfacial evolution. This work provides insights into designing glycerolate-derived materials with tailored interfacial structures and electronic properties for advanced energy storage applications.
- Open Access
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (36) , 17030-17043
Nickel Sulfide/Molybdenum Disulfide Nanocomposites Synthesized via a Sulfur Precursor-Free Hydrothermal Route for Supercapacitors and Sodium-ion Batteries
Supercapacitors and sodium-ion batteries (SIBs) are promising energy storage technologies because of their high power and energy densities, where electrode materials hold a pivotal role in determining the overall performance. In this work, NiSx/MoS2 nanocomposites are synthesized via a sulfur precursor-free hydrothermal method, utilizing 1T-MoS2 as both the template and sulfur source. The influence of nickel precursor concentrations on the morphology and electrochemical performance is systematically investigated for supercapacitor and SIB applications. The resulting NiSx/MoS2 nanocomposites exhibit uniform particle sizes and homogeneous morphology. Electrochemical characterization reveals that the NiSx/MoS2-0.25 nanocomposite unveils the maximum specific capacitance of 585.1 F/g at 1 A/g, outperforming both pristine 1T- and 2H-MoS2. The optimized composite is further utilized to construct an asymmetric supercapacitor, which displays admirable durability, holding 96% of its initial capacitance after 9000 cycles. Additionally, the NiSx/MoS2-0.25 nanocomposite is employed in SIBs as an anode material, demonstrating a reversible capacity of 560.3 mAh/g at 0.05 A/g. The charge storage mechanism and cycling stability are further evaluated by electrochemical analysis, confirming their excellent electrochemical performance and structural integrity over 100 cycles.
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (36) , 17030-17043
Open AccessNickel Sulfide/Molybdenum Disulfide Nanocomposites Synthesized via a Sulfur Precursor-Free Hydrothermal Route for Supercapacitors and Sodium-ion Batteries
Supercapacitors and sodium-ion batteries (SIBs) are promising energy storage technologies because of their high power and energy densities, where electrode materials hold a pivotal role in determining the overall performance. In this work, NiSx/MoS2 nanocomposites are synthesized via a sulfur precursor-free hydrothermal method, utilizing 1T-MoS2 as both the template and sulfur source. The influence of nickel precursor concentrations on the morphology and electrochemical performance is systematically investigated for supercapacitor and SIB applications. The resulting NiSx/MoS2 nanocomposites exhibit uniform particle sizes and homogeneous morphology. Electrochemical characterization reveals that the NiSx/MoS2-0.25 nanocomposite unveils the maximum specific capacitance of 585.1 F/g at 1 A/g, outperforming both pristine 1T- and 2H-MoS2. The optimized composite is further utilized to construct an asymmetric supercapacitor, which displays admirable durability, holding 96% of its initial capacitance after 9000 cycles. Additionally, the NiSx/MoS2-0.25 nanocomposite is employed in SIBs as an anode material, demonstrating a reversible capacity of 560.3 mAh/g at 0.05 A/g. The charge storage mechanism and cycling stability are further evaluated by electrochemical analysis, confirming their excellent electrochemical performance and structural integrity over 100 cycles.
- Open Access
- 5 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (16) , 10723-10735
Growth of Single and Bimetallic Nickel and Cobalt Compounds for High Performance Supercapacitors via Fluoride-Based Structure-Directing Regulation
Transition-metal compounds have attracted considerable attention as electroactive materials for supercapacitors because of their efficient reversible redox reactions. NH4HF2 and NH4BF4 have been demonstrated as effective structure-directing agents (SDAs) for regulating the growth and electrochemical properties of transition-metal compounds. However, systematic investigations of single and bimetallic systems under an NH4HF2/NH4BF4 environment remain limited. In this study, nickel- and cobalt-based single and bimetallic systems are synthesized in the solution containing NH4HF2 and NH4BF4 as mixed SDAs. The dual-SDA environment together with bimetallic interaction effectively modulates nucleation kinetics and crystal growth, inducing abundant oxygen vacancies and constructing a hierarchical porous architecture with improved ion-transport pathways. These structural advantages significantly enhance electroactive surface exposure and facilitate rapid faradaic redox reactions. The bimetallic electrode delivers a high specific capacitance (CF) of 1933.3 F/g at 20 mV/s, outperforming Ni- and Co-based electrodes with CF values of 778.7 and 132.4 F/g, respectively. The assembled symmetric supercapacitor exhibits a maximum energy density of 13.4 Wh/kg at 666.7 W/kg as well as a CF retention of 87.5% and Coulombic efficiency of 98.0% after 10,000 cycles. This work provides a viable strategy for coordinating defect engineering and porous structure optimization in bimetallic systems for advanced energy storage applications.
- 5 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (16) , 10723-10735
Open AccessGrowth of Single and Bimetallic Nickel and Cobalt Compounds for High Performance Supercapacitors via Fluoride-Based Structure-Directing Regulation
Transition-metal compounds have attracted considerable attention as electroactive materials for supercapacitors because of their efficient reversible redox reactions. NH4HF2 and NH4BF4 have been demonstrated as effective structure-directing agents (SDAs) for regulating the growth and electrochemical properties of transition-metal compounds. However, systematic investigations of single and bimetallic systems under an NH4HF2/NH4BF4 environment remain limited. In this study, nickel- and cobalt-based single and bimetallic systems are synthesized in the solution containing NH4HF2 and NH4BF4 as mixed SDAs. The dual-SDA environment together with bimetallic interaction effectively modulates nucleation kinetics and crystal growth, inducing abundant oxygen vacancies and constructing a hierarchical porous architecture with improved ion-transport pathways. These structural advantages significantly enhance electroactive surface exposure and facilitate rapid faradaic redox reactions. The bimetallic electrode delivers a high specific capacitance (CF) of 1933.3 F/g at 20 mV/s, outperforming Ni- and Co-based electrodes with CF values of 778.7 and 132.4 F/g, respectively. The assembled symmetric supercapacitor exhibits a maximum energy density of 13.4 Wh/kg at 666.7 W/kg as well as a CF retention of 87.5% and Coulombic efficiency of 98.0% after 10,000 cycles. This work provides a viable strategy for coordinating defect engineering and porous structure optimization in bimetallic systems for advanced energy storage applications.
- Open Access
- 22 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (26) , 12623-12633
Synergistic Modulation of Nanoscale Architectures and Electronic Structures in Co–Ni Bimetallic Hydroxides for Enhanced Redox Kinetics in Supercapacitors
- 22 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (26) , 12623-12633
Open AccessSynergistic Modulation of Nanoscale Architectures and Electronic Structures in Co–Ni Bimetallic Hydroxides for Enhanced Redox Kinetics in Supercapacitors
- Open Access
- 26 May 2026
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 27 (11) , 4806
Phase-Dependent MoS2 Nanosheets-Embedded Urinary Catheter for Advanced Photothermal Sterilization
The high prevalence of catheter-associated urinary tract infections (CAUTIs) has become a significant concern in the healthcare system, prompting the development of antibacterial urinary catheters to effectively prevent these infections in clinical settings. In this work, metallic phase and semiconducting phase molybdenum disulfide (MoS2) embedded polydimethylsiloxane (PDMS) were developed as antibacterial urinary catheters with photothermal sterilization. The metallic phase MoS2 (1T-MoS2) was synthesized using a facile hydrothermal method, and an annealing process transformed it into the semiconducting phase (2H-MoS2). The optical and structural characterizations confirmed the successful preparations of 1T-MoS2 nanosheets (1T-MoS2 NSs) and 2H-MoS2 NSs. The increase in the contents of 1T-MoS2 NSs and 2H-MoS2 NSs in PDMS resulted in enhanced photothermal conversion, a slight decrease in the water contact angle, and no significant changes in the mechanical properties of the samples. The bacterial growth curves demonstrated the remarkable ability of phase-dependent 1T- and 2H-MoS2 NSs-embedded PDMS urinary catheters to inhibit the growth of E. coli and S. aureus with near-infrared (NIR) laser irradiation. In the agar plate test, exposing PDMS with 0.3% 1T-MoS2 or 2H-MoS2 to NIR for 10 min demonstrated excellent antibacterial effects, completely eradicating E. coli and eliminating over 99.9% of S. aureus. The SEM image results highlighted the significant photothermal antibacterial effect of 1T-MoS2 PDMS and 2H-MoS2 PDMS urinary catheters, effectively damaging and eradicating both E. coli and S. aureus. The 1T-MoS2 PDMS and 2H-MoS2 PDMS urinary catheters, with excellent photothermal effects, good hydrophobicity, and superior mechanical properties, demonstrated their potential as photothermal antibacterial catheters for clinical applications.
- 26 May 2026
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 27 (11) , 4806
Open AccessPhase-Dependent MoS2 Nanosheets-Embedded Urinary Catheter for Advanced Photothermal Sterilization
The high prevalence of catheter-associated urinary tract infections (CAUTIs) has become a significant concern in the healthcare system, prompting the development of antibacterial urinary catheters to effectively prevent these infections in clinical settings. In this work, metallic phase and semiconducting phase molybdenum disulfide (MoS2) embedded polydimethylsiloxane (PDMS) were developed as antibacterial urinary catheters with photothermal sterilization. The metallic phase MoS2 (1T-MoS2) was synthesized using a facile hydrothermal method, and an annealing process transformed it into the semiconducting phase (2H-MoS2). The optical and structural characterizations confirmed the successful preparations of 1T-MoS2 nanosheets (1T-MoS2 NSs) and 2H-MoS2 NSs. The increase in the contents of 1T-MoS2 NSs and 2H-MoS2 NSs in PDMS resulted in enhanced photothermal conversion, a slight decrease in the water contact angle, and no significant changes in the mechanical properties of the samples. The bacterial growth curves demonstrated the remarkable ability of phase-dependent 1T- and 2H-MoS2 NSs-embedded PDMS urinary catheters to inhibit the growth of E. coli and S. aureus with near-infrared (NIR) laser irradiation. In the agar plate test, exposing PDMS with 0.3% 1T-MoS2 or 2H-MoS2 to NIR for 10 min demonstrated excellent antibacterial effects, completely eradicating E. coli and eliminating over 99.9% of S. aureus. The SEM image results highlighted the significant photothermal antibacterial effect of 1T-MoS2 PDMS and 2H-MoS2 PDMS urinary catheters, effectively damaging and eradicating both E. coli and S. aureus. The 1T-MoS2 PDMS and 2H-MoS2 PDMS urinary catheters, with excellent photothermal effects, good hydrophobicity, and superior mechanical properties, demonstrated their potential as photothermal antibacterial catheters for clinical applications.
- Open Access
- 19 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (3) , 1433-1443
Controlled Comparative Study of Phase Selectivity, Morphology, and Electrochemical Performance in Vanadium-Based Co and Ni Compounds for Hybrid Energy Storage
- 19 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (3) , 1433-1443
Open AccessControlled Comparative Study of Phase Selectivity, Morphology, and Electrochemical Performance in Vanadium-Based Co and Ni Compounds for Hybrid Energy Storage
- Open Access
- 9 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (24) , 18146-18157
Interface-Engineered Nickel Foam Electrodes with Polydopamine and Ultraphene for High-Performance Nickel Iron Metal–Organic Framework Hybrid Energy Storage
- 9 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (24) , 18146-18157
Open AccessInterface-Engineered Nickel Foam Electrodes with Polydopamine and Ultraphene for High-Performance Nickel Iron Metal–Organic Framework Hybrid Energy Storage
- Open Access
- 14 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (22) , 17043-17053
Interfacial Engineering of Sulfurized Cobalt/Nickel Glycerates Synthesized from Tetrafluoroborate-Based Precursors for High-Performance Hybrid Energy Storage
- 14 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (22) , 17043-17053
Open AccessInterfacial Engineering of Sulfurized Cobalt/Nickel Glycerates Synthesized from Tetrafluoroborate-Based Precursors for High-Performance Hybrid Energy Storage