CACaio V. S. Almeida

Caio V. S. Almeida

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Caio V. S. Almeida has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Amorphous MoS x –FeOOH Electrocatalyst for Selective Nitrate-to-Ammonia Conversion via Enhanced Intermediate Reduction

    by Caio V. S. Almeida, Lucia H. Mascaro

    Electrochemical nitrate reduction to ammonia offers a sustainable route for both nitrogen recovery and decentralized ammonia production but remains limited by low selectivity and competing hydrogen evolution. Here, we report an amorphous MoSx–FeOOH electrocatalyst synthesized via a simple two-step electrodeposition method on carbon paper. The FeOOH-modified MoSx structure promotes the reduction of nitrate-derived intermediates, leading to enhanced ammonia selectivity. The MoSx–FeOOH catalyst achieves a Faradaic efficiency of 93.3% and an NH3 yield rate of 400 μg h–1 cm–2 at −0.35 V vs RHE (reversible hydrogen electrode) in a neutral electrolyte, outperforming MoSx by more than four times. The improved performance is attributed to the electronic modulation of MoSx and the formation of surface MoOx species, which facilitate intermediate conversion and mitigate hydrogen evolution. The catalyst also exhibits stable operation over extended electrolysis and repeated cycles. This work demonstrates that amorphous heterostructures can effectively tune reaction pathways in nitrate electroreduction, providing a viable strategy for efficient and scalable ammonia production from nitrate-contaminated water.

  • Open Access

    Synthesis-Sequence-Controlled Surface and Electronic Structure in Pd–Ag–Ni(OH) 2 /C Electrocatalysts for Efficient Formic Acid Oxidation

    by Maria E. S. C. Argôlo, Caio V. S. Almeida, Connor Sherwin, Andrea E. Russell, Katlin I. B. Eguiluz, Giancarlo R. Salazar-Banda

    The development of efficient and durable electrocatalysts for the formic acid oxidation reaction (FAOR) is central to the progress of direct formic acid fuel cells (DFAFCs). Here, we investigate how the synthesis sequence and reduction pathway influence the surface and electronic structure of PdAgNi(OH)2/C nanocomposites and, consequently, their FAOR performance in acidic media. Binary Pd/Ni(OH)2 catalysts with Pd/Ni(OH)2 mass ratios of 30:70, 50:50, and 70:30 were first screened, revealing 50:50 as the optimal composition. Partial substitution of Pd by Ag (Pd40Ag10 and Pd30Ag20 on Ni(OH)2(50)/C) was then combined with either sequential or simultaneous NaBH4-assisted reduction. Structural characterization by XRD, TEM, and XANES/EXAFS show that simultaneous coreduction tightens the Pd–Ag–Ni interfacial coupling, enhances Pd dispersion, and increases the contribution of Pd–O and Pd–Ni scattering paths, indicative of strong metal–oxide interactions. Electrochemical measurements demonstrate that the Pd30Ag20Ni(OH)2(50)/C catalyst prepared by simultaneous reduction exhibits the highest mass activity toward FAOR (6164 mA mgPd–1), a ca. 23-fold enhancement over commercial Pd/C, together with improved stability under potential cycling. These results demonstrate that controlling the synthesis sequence is an effective method for tuning the interfacial electronic structure of multicomponent Pd-based catalysts, providing practical guidelines for designing FAOR electrocatalysts for DFAFCs and related liquid-fuel energy conversion devices.


  • Open Access

    Sustainable Electrosynthesis of Propylamines through Nitrogen Reduction on a MoS 2 Catalyst

    by Caio V. S. Almeida, Ana. B. Cardile, Lucia H. Mascaro, Frank Marken

    The electrocatalytic utilization of nitrogen compounds for C–N coupling chemistry is a promising research area with significant potential to become a sustainable method for producing organonitrogen molecules. The most commonly employed C–N coupling reaction is reductive amination. In this study, we demonstrate an alternative electrochemical reductive amination reaction using N2 gas as the nitrogen source, which enables the production of isopropylamine and diisopropylamine in a single process. For instance, these reactions occur at amorphous MoS2-coated carbon paper electrodes. This opens the doors to complex molecule electrosynthesis directly from the gas feed. The effects of the acetone concentration and applied potential on reaction yields are investigated. Direct gas feed is demonstrated as a sustainable electro-organic synthetic technology for organic amines. There is an increase in the production of C3H9N and C6H15N with increasing acetone concentration. For 0.4 M acetone under N2 (at pH 7.0), isopropylamine and diisopropylamine yield rates are 3.1 and 6.7 μg h–1 mg–1, respectively, at −0.85 V SCEsat. KCl. The highest faradaic efficiency is obtained at −0.75 V SCEsat. KCl for C3H9N (0.46%) and C6H15N (2.0%). At more negative potentials, there is a decrease in the production of both amines mainly due to the enhanced/competing HER. In all cases, diisopropylamine is the main organic product. This work provides a new and attractive strategy for organic amine synthesis via one-step electrochemical nitrogen reduction.


  • Rhodium-decorated palladium nanocubes supported on Ni(OH)2 nanosheets/C for enhanced ethanol oxidation

    by Caio V.S. Almeida, Connor Sherwin, Andrea E. Russell, Katlin I.B. Eguiluz, Giancarlo R. Salazar-Banda


  • Open Access

    The Effect of SnO2 and Rh on Pt Nanowire Catalysts for Ethanol Oxidation

    by Edmundo S. Valerio Neto, Caio V.S. Almeida, Giancarlo R. Salazar-Banda, Katlin I.B. Eguiluz

    In this study, we synthesized Pt-Rh nanowires (NWs) through chemical reduction of metallic precursors using formic acid at room temperature, excluding the use of surfactants, templates, or stabilizing agents. These NWs were supported on two substrates: carbon (Vulcan XC-72R) and carbon modified with tin oxide (SnO2) via the sol-gel method (10 wt.% SnO2). We explored the electroactivity of Pt/SnO2/C, Pt-Rh/C, Pt-Rh/SnO2(commercial)/C (commercial SnO2), and Pt-Rh/SnO2/C NWs toward electrochemical oxidation of ethanol in acidic media using various techniques, including CO-stripping, cyclic voltammetry, derivative voltammetry, chronoamperometry, and steady-state polarization curves. Physical characterization involved X-ray diffraction and transmission electron microscopy. The synthesized NWs exhibit higher ethanol oxidation activity than the commercial Pt/C (Johnson Matthey™) catalyst. Rh atoms are hypothesized to enhance complete ethanol oxidation, while the NW morphology improves ethanol adsorption at the catalyst surface for subsequent oxidation. Additionally, the choice of support material plays a significant role in influencing the catalytic activity. The superior catalytic activity of Pt-Rh/SnO2/C NWs may be attributed to the facile dissociation of the C-C bond, low CO adsorption (electronic effect due to Rh presence), and the bifunctional mechanism facilitated by the oxophilic nature of the SnO2 support.


  • Selectivity and catalytic performance of Pd @Pt /C nanoparticles for methanol electrooxidation

    by Dara S. Santos, Caio V.S. Almeida, Katlin I.B. Eguiluz, Giancarlo R. Salazar-Banda


  • Template‐ and Surfactant‐Free Room Temperature Synthesis of Pt/C and Pt−Rh/C Nanowires/Nanoparticles for Ethanol Electro‐Oxidation

    by Edmundo S. Valério Neto, Caio V. S. Almeida, Haoliang Huang, Andrea E. Russell, Katlin I. B. Eguiluz, Giancarlo R. Salazar‐Banda

    The synthesis of Pt−Rh alloy nanowires (NWs) using straightforward methodologies remains a challenge. Here, carbon‐supported Pt and Pt−Rh nanowire catalysts were synthesised by chemical reduction at room temperature, without using surfactants or templates. The method of synthesis used yielded Pt/C NWs and a mixture of nanowires with some nanoparticles for the Pt−Rh/C catalysts (characterised using XRD, TEM, EDX, XPS, and XAS). The nanoparticles form due to differences in the surface energy and atomic radius between Pt and Rh. The binary NWs are found to be more active towards ethanol oxidation than the commercial Pt/C reference catalyst. Additionally, the Pt−Rh/C NW catalyst displays a specific activity 2.5‐fold higher than the Pt/C NWs and Pt/C reference catalysts after 15 min of chronoamperometric tests (at 0.5 VvsRHE). Thus, the synthesised carbon‐supported Pt NWs and Pt−Rh nanowires‐nanoparticles are promising alternatives for direct ethanol fuel cell anodes.


  • Open Access

    A Critical Review of Photo-Based Advanced Oxidation Processes to Pharmaceutical Degradation

    by Isabelle M. D. Gonzaga, Caio V. S. Almeida, Lucia H. Mascaro

    Currently, the production and consumption of pharmaceuticals is growing exponentially, making them emerging contaminants that cause hazards to the ecological environment and human health. These drugs have been detected in surface water and drinking water around the world. This indicates that the conventional treatments used are ineffective for the removal of these compounds from the water, since they are very complex, with high stability and have high persistence in aquatic environments. Considering this problem, several types of alternative treatments, such as advanced oxidative processes, have been studied. Of these, AOPs using irradiation have received increasing interest due to their fast reaction rate and the ability to generate oxidizing species, which leads to an efficient degradation and mineralization of organic compounds, thus improving the quality of water and allowing its reuse. Therefore, in this review, we focus on the advances made in the last five years of irradiated AOPs in the degradation of different classes of pharmaceutical compounds. The articles address different study parameters, such as the method of the synthesis of materials, oxidants used, treatment time, type of light used and toxicity of effluents. This review highlights the success of irradiated AOPs in the removal of pharmaceuticals and hopes to help the readers to better understand these processes and their limitations for removing drugs from the environment. It also sheds light on some paths that future research must follow so that the technology can be fully applied.


  • The Effect of Pt Loading on Catalytic Activity of Pb0.25@Ptx/C Nanocomposites Toward Ethanol Oxidation

    by Lays S. R. Silva, Iasmim G. Melo, Caio V. S. Almeida, Cristiano T. Meneses, Katlin I. B. Eguiluz, Giancarlo R. Salazar-Banda

    Here, we study the influence of the Pt loading and the particle size of Pb0.25@Ptx/C catalysts on their specific activity toward ethanol oxidation in acid media. High angle annular dark field-scanning transmission electron microscopy and electron energy loss spectroscopy data indicate the formation of Pb0.25@Ptx/C core-shell structures, which are well dispersed on carbon support, with spherical shapes and small particle sizes (2.9-6.6 nm). Cyclic voltammetry experiments confirm characteristic profiles of polycrystalline Pt for Pb0.25@Ptx/C structures. The specific activity of the catalysts toward ethanol oxidation reaction greatly depends on the Pt content on Pb core, and consequently, depends on the size of the nanoparticles. The optimum activity occurs with the lowest Pt load in the shell and smaller particle size. Enhancements in specific activity result from the higher number of nanoparticles available for the ethanol oxidation reaction and the tensile strain effect of Pt atoms on the surface expanded in Pb0.25@Pt0.75/C. The lower activity observed for the catalysts with loads of 35 and 50% wt. (Pb0.25@Pt1.5 and Pb0.25@Pt2.25/C, respectively) in comparison to Pt/C, could be explain by the larger particle sizes obtained at these catalysts. Moreover, the Pb0.25@Pt0.75/C catalyst has high electrochemical stability and should be more stable in direct ethanol fuel cells systems than monolithic Pt catalysts. This is because the Pt shell in Pb0.25@Pt0.75/C exhibits lower chemical potential (p < 0) than at Pt/C and at the other core-shell catalysts studied; thus, reducing its tendency to dissolve. The developed core-shell nanostructure is thus a potential candidate as high-performance anode catalyst for application in direct ethanol fuel cells.