Yue-Yang Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yue-Yang Liu has a total of 146 co-authors. Here are the top co-authors by number of shared publications:
- Zhongming Wei
State Key Laboratory of Semiconductor Physics and Chip Technologies, Institute of Semiconductors, Chinese Academy of Sciences 3 , Beijing 100083
10 shared publications - Juehan Yang
State Key Laboratory of Semiconductor Physics and Chip Technologies, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
5 shared publications Tao Xiong
State Key Laboratory for Superlattices and Microstructures, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
5 shared publicationsKaiyao Xin
State Key Laboratory of Semiconductor Physics and Chip Technologies, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
4 shared publicationsKe-Qiu Chen
Department of Applied Physics, School of Physics and Electronics, Hunan University 1 , Changsha 410082, China
4 shared publicationsZiqi Zhou
State Key Laboratory of Semiconductor Physics and Chip Technologies, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
4 shared publications
Latest Publications
- Open Access
- 16 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 9928
Twist degree of freedom activated by pressure-driven interlayer engineering in spiral WS2
Precise twist-angle control in van der Waals (vdW) moiré superlattices enables twistronic tuning of interfacial responses and emergent quantum states, but it remains unclear how atomic registry in three-dimensional stacks is linked to interlayer coupling and whether it can produce an internal twist degree of freedom without external torque. Here, we show that, via interlayer engineering, screw-dislocation-driven multilayer spiral WS 2 exhibits a reversible pressure-induced rotation of second-harmonic-generation polar pattern that saturates near 1 GPa, corresponding to an effective average interlayer twist of 0.2° per layer. This compression-twist coupling arises from moiré defined hierarchy of stacking energies and the associated atomic reconstruction, which together generate a spontaneous rotational torque at a slipped, metastable interface and couple the twist angle to the interlayer spacing. Our findings establish twist-degree-of-freedom manipulation in vdW crystals, opening pathways to reshape correlation-driven behaviors in moiré-of-moiré architectures and to explore chiral elasticity beyond Cauchy continuum mechanics.
- 16 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 9928
Open AccessTwist degree of freedom activated by pressure-driven interlayer engineering in spiral WS2
Precise twist-angle control in van der Waals (vdW) moiré superlattices enables twistronic tuning of interfacial responses and emergent quantum states, but it remains unclear how atomic registry in three-dimensional stacks is linked to interlayer coupling and whether it can produce an internal twist degree of freedom without external torque. Here, we show that, via interlayer engineering, screw-dislocation-driven multilayer spiral WS 2 exhibits a reversible pressure-induced rotation of second-harmonic-generation polar pattern that saturates near 1 GPa, corresponding to an effective average interlayer twist of 0.2° per layer. This compression-twist coupling arises from moiré defined hierarchy of stacking energies and the associated atomic reconstruction, which together generate a spontaneous rotational torque at a slipped, metastable interface and couple the twist angle to the interlayer spacing. Our findings establish twist-degree-of-freedom manipulation in vdW crystals, opening pathways to reshape correlation-driven behaviors in moiré-of-moiré architectures and to explore chiral elasticity beyond Cauchy continuum mechanics.
- 10 September 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 393 (6816) , 1139-1144
Giant tunneling electroresistance in sliding ferroelectrics
Nonvolatile memories should store information reliably while consuming little energy. Ferroelectric tunnel junctions offer compact readout, but conventional ionic displacement ferroelectrics can fatigue, and two-dimensional sliding ferroelectrics are robust but generate weak readout in two terminal devices. We engineered a van der Waals junction using rhombohedral molybdenum disulfide, hexagonal boron nitride, monolayer graphene, and chromium. This architecture converts small sliding polarization into synergistic modulation of tunneling barrier height and carrier concentration. The devices showed tunneling electroresistance above 10 million, a high conductance state current density of 222 amperes per square centimeter at 0.5 volts, and an endurance beyond 100 billion cycles while switching with 13-nanosecond pulses at an estimated energy of 6.5 femtojoules, offering a route to compact low-power memory.
- 10 September 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 393 (6816) , 1139-1144
Giant tunneling electroresistance in sliding ferroelectrics
Nonvolatile memories should store information reliably while consuming little energy. Ferroelectric tunnel junctions offer compact readout, but conventional ionic displacement ferroelectrics can fatigue, and two-dimensional sliding ferroelectrics are robust but generate weak readout in two terminal devices. We engineered a van der Waals junction using rhombohedral molybdenum disulfide, hexagonal boron nitride, monolayer graphene, and chromium. This architecture converts small sliding polarization into synergistic modulation of tunneling barrier height and carrier concentration. The devices showed tunneling electroresistance above 10 million, a high conductance state current density of 222 amperes per square centimeter at 0.5 volts, and an endurance beyond 100 billion cycles while switching with 13-nanosecond pulses at an estimated energy of 6.5 femtojoules, offering a route to compact low-power memory.
- 11 August 2026
- Published by Springer Nature in Science China Information Sciences
- Vol. 69 (9) , 192402
2D fluorophlogopite mica as van der Waals dielectrics for high-breakdown-strength field-effect transistors
- 11 August 2026
- Published by Springer Nature in Science China Information Sciences
- Vol. 69 (9) , 192402
2D fluorophlogopite mica as van der Waals dielectrics for high-breakdown-strength field-effect transistors
- 16 June 2026
- Published by IOP Publishing in Chinese Physics B
- Vol. 35 (9) , 097201
Asymmetric Charge Trapping and Emission Kinetics in SiO 2 /HfO 2 for Accurate Transistor Reliability Simulation
Charge trapping in gate dielectrics governs reliability degradation in advanced transistors, and an essential mission is calculating the trapping rates of different defects accurately. Here, by high-throughput ab initio calculations, we demonstrate a significant asymmetric relaxation behavior of oxide defects during charge trapping and emission, and thus the predominantly assumed symmetric relaxation is invalid. Multiscale atomic-to-device simulations further reveal that the conventional symmetric approximation introduces orders-of-magnitude errors in charge transfer rates and qualitatively mischaracterizes the defect-resolved degradation. Therefore, we provide asymmetric relaxation data and corresponding modified charge trapping model for accurate reliability simulation of advanced transistors.
- 16 June 2026
- Published by IOP Publishing in Chinese Physics B
- Vol. 35 (9) , 097201
Asymmetric Charge Trapping and Emission Kinetics in SiO 2 /HfO 2 for Accurate Transistor Reliability Simulation
Charge trapping in gate dielectrics governs reliability degradation in advanced transistors, and an essential mission is calculating the trapping rates of different defects accurately. Here, by high-throughput ab initio calculations, we demonstrate a significant asymmetric relaxation behavior of oxide defects during charge trapping and emission, and thus the predominantly assumed symmetric relaxation is invalid. Multiscale atomic-to-device simulations further reveal that the conventional symmetric approximation introduces orders-of-magnitude errors in charge transfer rates and qualitatively mischaracterizes the defect-resolved degradation. Therefore, we provide asymmetric relaxation data and corresponding modified charge trapping model for accurate reliability simulation of advanced transistors.
- 27 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (51)
Self‐Powered Solar‐Blind Polarization‐Sensitive β‐Ga 2 O 3 Photodetector Focal Plane Array
Polarization‐sensitive solar‐blind ultraviolet SBUV photodetectors, resolving light intensity, wavelength and polarization, are critical for flame detection, ozone monitoring and high‐contrast imaging. However, fabricating polarizer‐free, miniaturized, low‐power real‐time imaging devices remains challenging, as miniaturization and polarizer removal inevitably compromise polarization performance and spatial resolution. β‐Ga 2 O 3 is an ideal material for its ultra‐wide bandgap (4.7–4.9 eV) that suppresses solar background noise and intrinsic anisotropy enabling polarizer‐free polarization‐sensitive photodetection. Herein, a solar‐blind polarization‐sensitive β‐Ga 2 O 3 photodetector focal plane array is fabricated by leveraging the anisotropic crystal structure of its (100) and (001) facets. The asymmetric electrode design is rationally employed to construct a Schottky barrier, which endows the array with self‐powered photodetection capability. The array exhibits a high polarization ratio (PR = 4.7), ultralow dark current (2 O 3 dependent on crystal facets, realizes synergistic optimization of key performances for miniaturized devices, and lays a reliable material and technical foundation for high‐performance SBUV polarization imaging systems.
- 27 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (51)
Self‐Powered Solar‐Blind Polarization‐Sensitive β‐Ga 2 O 3 Photodetector Focal Plane Array
Polarization‐sensitive solar‐blind ultraviolet SBUV photodetectors, resolving light intensity, wavelength and polarization, are critical for flame detection, ozone monitoring and high‐contrast imaging. However, fabricating polarizer‐free, miniaturized, low‐power real‐time imaging devices remains challenging, as miniaturization and polarizer removal inevitably compromise polarization performance and spatial resolution. β‐Ga 2 O 3 is an ideal material for its ultra‐wide bandgap (4.7–4.9 eV) that suppresses solar background noise and intrinsic anisotropy enabling polarizer‐free polarization‐sensitive photodetection. Herein, a solar‐blind polarization‐sensitive β‐Ga 2 O 3 photodetector focal plane array is fabricated by leveraging the anisotropic crystal structure of its (100) and (001) facets. The asymmetric electrode design is rationally employed to construct a Schottky barrier, which endows the array with self‐powered photodetection capability. The array exhibits a high polarization ratio (PR = 4.7), ultralow dark current (2 O 3 dependent on crystal facets, realizes synergistic optimization of key performances for miniaturized devices, and lays a reliable material and technical foundation for high‐performance SBUV polarization imaging systems.
- 12 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (5) , 1029-1032
A General and Non-Destructive P-Type Doping Strategy Toward 2-D Complementary Technology
One stumbling block for two-dimensional (2D) materials moving towards logic circuits is the lack of controllable and high-quality p-type 2D semiconductors. Here, by performing ab initio calculations on a series of atomistic interface models, we elucidate the mechanism behind an effective and universal strategy to modulate 2D semiconductors to p-type without damaging the channel material itself. This is realized by stacking the 2D semiconductors on a 2D hole reservoir material, typically CrOCl, so that the semiconductors release electrons and absorb holes. The strategy is confirmed to be effective for MoS2, MoSe2, and WSe2 with single or multiple layers. An analytical formula is further derived to relate the defect concentration, material thickness, and the degree of p-type modulation, providing design guidelines for this non-destructive doping strategy. Hopefully, this general and non-destructive p-type doping strategy will promote the application of emerging 2D semiconductors in CMOS technology and logic circuits.
- 12 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (5) , 1029-1032
A General and Non-Destructive P-Type Doping Strategy Toward 2-D Complementary Technology
One stumbling block for two-dimensional (2D) materials moving towards logic circuits is the lack of controllable and high-quality p-type 2D semiconductors. Here, by performing ab initio calculations on a series of atomistic interface models, we elucidate the mechanism behind an effective and universal strategy to modulate 2D semiconductors to p-type without damaging the channel material itself. This is realized by stacking the 2D semiconductors on a 2D hole reservoir material, typically CrOCl, so that the semiconductors release electrons and absorb holes. The strategy is confirmed to be effective for MoS2, MoSe2, and WSe2 with single or multiple layers. An analytical formula is further derived to relate the defect concentration, material thickness, and the degree of p-type modulation, providing design guidelines for this non-destructive doping strategy. Hopefully, this general and non-destructive p-type doping strategy will promote the application of emerging 2D semiconductors in CMOS technology and logic circuits.
- 17 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (20)
Ohmic contact at 2D Bi2O2Se/TaNiTe5 interface via self-modulation doping
The quasi-2D Bi2O2Se has become a rising star in channel materials, but its contact resistance (RC) with metal still lags behind the requirements for advanced technology nodes. Here, ultra-low Schottky barriers and Ohmic contact are realized by integrating Bi2O2Se with 2D semimetal TaNiTe5, and excellent carrier injection efficiency is confirmed in the TaNiTe5/Bi2O2Se/TaNiTe5 stack. The physical mechanism we propose is reducing the work function of TaNiTe5 by intrinsic atom doping, and Ta doping is found to be most efficient because of its most delocalized charge density. These results and mechanisms are very meaningful for regulating the Schottky barrier height in 2D transistors to meet high performance and scalability requirements.
- 17 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (20)
Ohmic contact at 2D Bi2O2Se/TaNiTe5 interface via self-modulation doping
The quasi-2D Bi2O2Se has become a rising star in channel materials, but its contact resistance (RC) with metal still lags behind the requirements for advanced technology nodes. Here, ultra-low Schottky barriers and Ohmic contact are realized by integrating Bi2O2Se with 2D semimetal TaNiTe5, and excellent carrier injection efficiency is confirmed in the TaNiTe5/Bi2O2Se/TaNiTe5 stack. The physical mechanism we propose is reducing the work function of TaNiTe5 by intrinsic atom doping, and Ta doping is found to be most efficient because of its most delocalized charge density. These results and mechanisms are very meaningful for regulating the Schottky barrier height in 2D transistors to meet high performance and scalability requirements.
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 7153-7160
Investigation on Cryogenic Reliability in FinFETs Under Hot Carrier Stress
Cryogenic CMOS technology is crucial for high-performance and quantum computing, but faces significant reliability challenges from exacerbated hot carrier degradation (HCD) at ultralow temperatures. In addition, cryogenic HCD (cryo-HCD) is further complicated by the coupling of cryogenic-specific phenomena, such as band tail states. In this work, a change temperature measure-stress-measure (MSM) method is established based on FinFET, which can separate the cryo-HCD from the effects of band tail states. It is found that additional ${V} _{\text {th}}$ shifts under cryo-HCD in pFinFET at 10 K. The physical mechanism is revealed by advanced atomic-scale characterization [transmission electron microscope (TEM)/energy-dispersive X-ray spectroscopy (EDS)/electron energy-loss spectroscopy (EELS)], which identifies directional Ge migration from Si ${}_{{1}-{x}}$ Ge x (SiGe) drain regions into the channel as the origin. Combined with ab initio calculations, we establish that this Ge migration suppresses band tail states, directly inducing the anomalous ${V} _{\text {th}}$ shift. These findings offer fundamental insights into cryogenic degradation mechanisms, underscoring the crucial role of atomic-scale material transport, which is essential for cryogenic reliability.
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 7153-7160
Investigation on Cryogenic Reliability in FinFETs Under Hot Carrier Stress
Cryogenic CMOS technology is crucial for high-performance and quantum computing, but faces significant reliability challenges from exacerbated hot carrier degradation (HCD) at ultralow temperatures. In addition, cryogenic HCD (cryo-HCD) is further complicated by the coupling of cryogenic-specific phenomena, such as band tail states. In this work, a change temperature measure-stress-measure (MSM) method is established based on FinFET, which can separate the cryo-HCD from the effects of band tail states. It is found that additional ${V} _{\text {th}}$ shifts under cryo-HCD in pFinFET at 10 K. The physical mechanism is revealed by advanced atomic-scale characterization [transmission electron microscope (TEM)/energy-dispersive X-ray spectroscopy (EDS)/electron energy-loss spectroscopy (EELS)], which identifies directional Ge migration from Si ${}_{{1}-{x}}$ Ge x (SiGe) drain regions into the channel as the origin. Combined with ab initio calculations, we establish that this Ge migration suppresses band tail states, directly inducing the anomalous ${V} _{\text {th}}$ shift. These findings offer fundamental insights into cryogenic degradation mechanisms, underscoring the crucial role of atomic-scale material transport, which is essential for cryogenic reliability.
- 4 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (5) , 2670-2676
Investigation on the Band Tail States in FinFETs at Cryogenic Temperature
Accurate characterization and modeling is essential to develop the cryogenic CMOS technology for quantum computing and high-performance computing (HPC). However, instabilities introduced by band tail states at cryogenic temperature obstruct the accurate extraction of intrinsic cryogenic device properties. While the existing studies predominantly focus on empirical dc characteristic fitting, the physical origin of the band tail states, particularly in FinFETs, remains fundamentally unexplored. In this article, the band tail states at cryogenic temperature for FinFET technology are comprehensively studied. A significant deviation of subthreshold swing (SS) from Boltzmann limits at temperature as high as 150 K is observed, which differs greatly from that happens at 50 K in planar devices. Moreover, abnormal current relaxation, which is accompanied with ON-state current increase and subthreshold current reduction, is thoroughly studied. These new findings are well understood in the unified framework of band tail states induced by impurity and surface roughness. This work provides a deep understanding of cryogenic CMOS characterization and modeling.
- 4 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (5) , 2670-2676
Investigation on the Band Tail States in FinFETs at Cryogenic Temperature
Accurate characterization and modeling is essential to develop the cryogenic CMOS technology for quantum computing and high-performance computing (HPC). However, instabilities introduced by band tail states at cryogenic temperature obstruct the accurate extraction of intrinsic cryogenic device properties. While the existing studies predominantly focus on empirical dc characteristic fitting, the physical origin of the band tail states, particularly in FinFETs, remains fundamentally unexplored. In this article, the band tail states at cryogenic temperature for FinFET technology are comprehensively studied. A significant deviation of subthreshold swing (SS) from Boltzmann limits at temperature as high as 150 K is observed, which differs greatly from that happens at 50 K in planar devices. Moreover, abnormal current relaxation, which is accompanied with ON-state current increase and subthreshold current reduction, is thoroughly studied. These new findings are well understood in the unified framework of band tail states induced by impurity and surface roughness. This work provides a deep understanding of cryogenic CMOS characterization and modeling.