Alzira Mota
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alzira Mota has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Hélio Castro
ISEP, Polytechnic of Porto, 4249-015 Porto, Portugal
7 shared publications - Paulo Ávila
Polytechnic of Porto
7 shared publications - João Bastos
Polytechnic of Porto
6 shared publications Paulo Ávila
ISEP, Polytechnic of Porto
6 shared publicationsJoão Bastos
ISEP, Polytechnic of Porto
5 shared publicationsAntónio Pires
3 shared publications
Latest Publications
- Open Access
- 28 March 2026
- Published by Elsevier in SSRN Electronic Journal
Exact and Evolutionary Approaches for an Integrated Parallel Machine Tooling Problem with Diameter and Material Setups
Efficient management of tool switches is a critical issue in parallel machine environments where setup operations arise from tool loading, diameter adjustments and material changes. While tool loading constraints have been widely studied, the joint consideration of diameter adjustments and material changes has received comparatively limited attention in the scheduling literature. This paper studies an integrated parallel machine tooling problem that incorporates these setup dependencies, reflecting operational conditions observed in manufacturing systems.Two mixed-integer linear programming (MILP) formulations are developed. Model~1 extends formulations from the literature, while Model~2, inspired by the multiple travelling salesman problem, is designed to capture the problem's combinatorial structure better. Both models solve a relaxed formulation that does not explicitly incorporate unloading decisions, and a final schedule is obtained by applying a KTNS-based policy.Computational experiments show that Model~1 is limited to small instances, whereas Model~2 presents better scalability. However, for some medium- and large-sized instances that meet the imposed time limit, the relaxed solution does not always yield a feasible schedule after the KTNS procedure.In addition, three evolutionary metaheuristic approaches are analysed: a permutation-based genetic algorithm (GA), its memetic extension with bounded local search (GA+LS), and a hybrid biased random-key genetic algorithm (BRKGA). Results on synthetic benchmarks show that BRKGA performs best overall, particularly on larger instances.An industrial case study reveals a different pattern: for medium-sized real instances, GA and GA+LS produce solutions comparable to those of the exact model within substantially shorter runtimes.
- 28 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessExact and Evolutionary Approaches for an Integrated Parallel Machine Tooling Problem with Diameter and Material Setups
Efficient management of tool switches is a critical issue in parallel machine environments where setup operations arise from tool loading, diameter adjustments and material changes. While tool loading constraints have been widely studied, the joint consideration of diameter adjustments and material changes has received comparatively limited attention in the scheduling literature. This paper studies an integrated parallel machine tooling problem that incorporates these setup dependencies, reflecting operational conditions observed in manufacturing systems.Two mixed-integer linear programming (MILP) formulations are developed. Model~1 extends formulations from the literature, while Model~2, inspired by the multiple travelling salesman problem, is designed to capture the problem's combinatorial structure better. Both models solve a relaxed formulation that does not explicitly incorporate unloading decisions, and a final schedule is obtained by applying a KTNS-based policy.Computational experiments show that Model~1 is limited to small instances, whereas Model~2 presents better scalability. However, for some medium- and large-sized instances that meet the imposed time limit, the relaxed solution does not always yield a feasible schedule after the KTNS procedure.In addition, three evolutionary metaheuristic approaches are analysed: a permutation-based genetic algorithm (GA), its memetic extension with bounded local search (GA+LS), and a hybrid biased random-key genetic algorithm (BRKGA). Results on synthetic benchmarks show that BRKGA performs best overall, particularly on larger instances.An industrial case study reveals a different pattern: for medium-sized real instances, GA and GA+LS produce solutions comparable to those of the exact model within substantially shorter runtimes.
- Open Access
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
The influence of service level on the economic viability of Onshore Power Supply (OPS) systems - A case study
The implementation of Onshore Power Supply (OPS) systems is recognised as an effective strategy to reduce air emissions and noise pollution from ships at berth, thereby supporting decarbonization goals established by the European Union. Despite its environmental advantages, the economic viability of OPS remains one of the main barriers to its widespread adoption in ports. In particular, limited research attention has paid to the extent to which the service level provided by OPS infrastructure affects the financial performance of such investments.This paper addresses this gap by analysing the relationship between service level and economic viability through a case study of the Southern Container Terminal at the Port of Leixões (Portugal). Three investment scenarios were evaluated, corresponding to the installation of one, two, and three OPS systems, delivering service levels of 65%, 94%, and 100%, respectively. A 20-year financial analysis (2025–2044) was conducted using Net Present Value (NPV), Internal Rate of Return (IRR), and Payback Period as key indicators, under discount rates of 3% and 5%.The results demonstrate that service level significantly influences investment feasibility. The scenario with a 65% service level is economically unviable, presenting negative NPVs and an IRR below the cost of capital. In contrast, the 94% and 100% service level scenarios generate positive NPVs (at 3%) and IRRs slightly above 5%, indicating moderate but acceptable profitability. However, increasing the service level from 94% to 100% does not produce a proportional improvement in financial returns, revealing diminishing marginal gains relative to the intermediate scenario.The findings indicate that maximising service level does not necessarily maximise economic attractiveness. Instead, an optimal balance between infrastructure capacity and expected demand is essential to ensure financial sustainability while delivering substantial environmental benefits. These findings offer practical guidance for port authorities and policymakers seeking to design economically viable OPS systems.
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessThe influence of service level on the economic viability of Onshore Power Supply (OPS) systems - A case study
The implementation of Onshore Power Supply (OPS) systems is recognised as an effective strategy to reduce air emissions and noise pollution from ships at berth, thereby supporting decarbonization goals established by the European Union. Despite its environmental advantages, the economic viability of OPS remains one of the main barriers to its widespread adoption in ports. In particular, limited research attention has paid to the extent to which the service level provided by OPS infrastructure affects the financial performance of such investments.This paper addresses this gap by analysing the relationship between service level and economic viability through a case study of the Southern Container Terminal at the Port of Leixões (Portugal). Three investment scenarios were evaluated, corresponding to the installation of one, two, and three OPS systems, delivering service levels of 65%, 94%, and 100%, respectively. A 20-year financial analysis (2025–2044) was conducted using Net Present Value (NPV), Internal Rate of Return (IRR), and Payback Period as key indicators, under discount rates of 3% and 5%.The results demonstrate that service level significantly influences investment feasibility. The scenario with a 65% service level is economically unviable, presenting negative NPVs and an IRR below the cost of capital. In contrast, the 94% and 100% service level scenarios generate positive NPVs (at 3%) and IRRs slightly above 5%, indicating moderate but acceptable profitability. However, increasing the service level from 94% to 100% does not produce a proportional improvement in financial returns, revealing diminishing marginal gains relative to the intermediate scenario.The findings indicate that maximising service level does not necessarily maximise economic attractiveness. Instead, an optimal balance between infrastructure capacity and expected demand is essential to ensure financial sustainability while delivering substantial environmental benefits. These findings offer practical guidance for port authorities and policymakers seeking to design economically viable OPS systems.
- 6 February 2026
- Published by Emerald Publishing in Journal of Quality in Maintenance Engineering
- Vol. 32 (1) , 234-268
Condition maintenance and prediction system in an injection molding machine: a case study
Purpose: In an increasingly competitive market, equipment availability is a strategic variable for the competitiveness and success of companies. The objective of the research in this article is to present contributions to reduce unplanned production stoppages and optimise the operational efficiency of an injection moulding machine. This will be achieved by developing a systematic strategy to integrate predictive and condition-based maintenance systems with maintenance management software. Design/methodology/approach: The model developed is based on the continuous monitoring of electrical signals and vibrations, with the processing of data collected in real time through a script developed in Python. This integrates the information into the maintenance management software, facilitating a quick and accurate response to component wear conditions. The methodology employed was action research, as it was a case study developed in a real context, with active participation in development and implementation, with the aim of continuous improvement. Findings: In August, a substantial increase was observed in the primary indicators: The mean time between failures (MTBF) increased by 97.36%, the mean time to repair (MTTR) increased by 313.31%, and the downtime was reduced by 65.04%. In December, although the figures were more moderate, significant improvements were maintained: The MTBF increased by 20%, the MTTR increased by 84%, and the downtime was reduced by 79%. Originality/value: The findings of the study indicated that the implementation of a structured approach for the acquisition and monitoring of electrical signals and vibration data was imperative to achieve substantial gains.
- 6 February 2026
- Published by Emerald Publishing in Journal of Quality in Maintenance Engineering
- Vol. 32 (1) , 234-268
Condition maintenance and prediction system in an injection molding machine: a case study
Purpose: In an increasingly competitive market, equipment availability is a strategic variable for the competitiveness and success of companies. The objective of the research in this article is to present contributions to reduce unplanned production stoppages and optimise the operational efficiency of an injection moulding machine. This will be achieved by developing a systematic strategy to integrate predictive and condition-based maintenance systems with maintenance management software. Design/methodology/approach: The model developed is based on the continuous monitoring of electrical signals and vibrations, with the processing of data collected in real time through a script developed in Python. This integrates the information into the maintenance management software, facilitating a quick and accurate response to component wear conditions. The methodology employed was action research, as it was a case study developed in a real context, with active participation in development and implementation, with the aim of continuous improvement. Findings: In August, a substantial increase was observed in the primary indicators: The mean time between failures (MTBF) increased by 97.36%, the mean time to repair (MTTR) increased by 313.31%, and the downtime was reduced by 65.04%. In December, although the figures were more moderate, significant improvements were maintained: The MTBF increased by 20%, the MTTR increased by 84%, and the downtime was reduced by 79%. Originality/value: The findings of the study indicated that the implementation of a structured approach for the acquisition and monitoring of electrical signals and vibration data was imperative to achieve substantial gains.
- Open Access
- 30 November 2025
- Published by Technical University of Kosice in Quality Innovation Prosperity
- Vol. 29 (3) , 92-111
Development of a Variant Process-Planning Tool: A Case Study
Purpose: This study addresses the development of a variant process planning tool, following the Knowledge-Based Variant Process Planning methodology, applied in a case study and presents the gains achieved. Methodology/Approach: Case study supported by six steps: (1) Feature Analysis, (2) Knowledge Retrieval, (3) Inference, (4) Plan Adaptation, (5) Knowledge Update, and (6) Plan Validation/Optimisation.. Findings: The implementation of the Knowledge-Based Variant Process Planning tool led to significant improvements: planner time reduced by 70%, analyst workload by 90%, and process plan errors to 0%. Results show this approach significantly improves process planning in customised production. Research Limitation/Implication: The limitations are associated with the specificity of the case study problem – the electric engine production systems. Originality/Value of paper: This study helps fill the gap in case studies on the Variant Process Planning approach, specifically for electric engine production systems, paving the way for similar companies to adopt Knowledge-Based Variant Process Planning.
- 30 November 2025
- Published by Technical University of Kosice in Quality Innovation Prosperity
- Vol. 29 (3) , 92-111
Open AccessDevelopment of a Variant Process-Planning Tool: A Case Study
Purpose: This study addresses the development of a variant process planning tool, following the Knowledge-Based Variant Process Planning methodology, applied in a case study and presents the gains achieved. Methodology/Approach: Case study supported by six steps: (1) Feature Analysis, (2) Knowledge Retrieval, (3) Inference, (4) Plan Adaptation, (5) Knowledge Update, and (6) Plan Validation/Optimisation.. Findings: The implementation of the Knowledge-Based Variant Process Planning tool led to significant improvements: planner time reduced by 70%, analyst workload by 90%, and process plan errors to 0%. Results show this approach significantly improves process planning in customised production. Research Limitation/Implication: The limitations are associated with the specificity of the case study problem – the electric engine production systems. Originality/Value of paper: This study helps fill the gap in case studies on the Variant Process Planning approach, specifically for electric engine production systems, paving the way for similar companies to adopt Knowledge-Based Variant Process Planning.
- 20 October 2025
- Published by Springer Nature
- p. 36-51
Learning Factory 5.0: An Open Design Model for Human-Centric, Sustainable, and Flexible Technical Education
- 20 October 2025
- Published by Springer Nature
- p. 36-51
Learning Factory 5.0: An Open Design Model for Human-Centric, Sustainable, and Flexible Technical Education
- 27 July 2025
- Published by Springer Nature
- p. 177-186
Multivariate Analysis of Products Tipology Data - A Case Study
- 27 July 2025
- Published by Springer Nature
- p. 177-186
Multivariate Analysis of Products Tipology Data - A Case Study
- 23 April 2025
- Published by Springer Nature
- p. 684-693
Optimisation and Control in Airborne Wind Energy: A Bibliometric Study
- 23 April 2025
- Published by Springer Nature
- p. 684-693
Optimisation and Control in Airborne Wind Energy: A Bibliometric Study
- Open Access
- 11 March 2025
- Published by Elsevier in Procedia Computer Science
- Vol. 256, 573-582
Comparative Analysis of Simulated Annealing and Tabu Search for Parallel Machine Scheduling
- 11 March 2025
- Published by Elsevier in Procedia Computer Science
- Vol. 256, 573-582
Open AccessComparative Analysis of Simulated Annealing and Tabu Search for Parallel Machine Scheduling
- Open Access
- 1 January 2024
- Published by Wiley in Journal of Engineering
- Vol. 2024 (1)
Comparative Analysis of Multicriteria Decision‐Making Methods for Bus Washing Process Selection: A Case Study
Water is at the core of sustainable development, and its use for human activities, including vehicle washing, should be done in a sustainable way. There are several technical solutions for washing buses offering different performances, making it difficult to choose the one that best meets the requirements of each specific case. The literature on the topic hardly analyzes the choice of the best technical solution for washing buses and does not apply and compare the results of different multicriteria decision‐making (MCDM) methods for the problem. The unique information available is from the different suppliers in the market. Whereby, this work intends to give a technical‐scientific contribution to fulfill this gaps. Therefore, the main objectives of this work are (1) to select the best sustainable technical solutions for washing buses depending on the specific conditions for a case study and (2) to analyze how different multicriteria decision‐making methods behave in the selection process. To achieve these objectives, the problem was approached as a case study in a public transport company in Portugal and the methodology followed the next steps: started with the identification of the different types of commercial technical solutions for washing buses; the company’s experts selected four main criteria: water consumption, operating costs, quality of washing, and time spent; the criteria weights were determined using the fuzzy‐AHP method; then four representative MCDM methods were selected, namely, AHP, ELECTRE, TOPSIS, and SMART; the ranks obtained for the four methods were compared; and a sensitivity analysis was performed. Considering the input data for the criteria and their weights, the results for all the methods showed that the best and the worst solution was the same, mobile portico with a brush and porticoes with three brushes, respectively. Furthermore, the results of the sensitivity analysis performed with disturbances for the weights of each criterion presented that the results are slightly affected and the similarity in rankings for the four MCDM methods was validated by Spearman’s rank correlation coefficient (rs) and Kendall’s coefficient of concordance (W). Considering these results, the SMART method, the less complex one, showed no difference from the others. For that reason, simple methods, such as SMART, in line with other works in the literature perform well in most cases. As a final remark of this work, it can be said that the methodology employed in this project can also be deemed applicable to other similar companies seeking technical solutions for bus or truck washing. Furthermore, the application of the SMART method, the less complex one and the most understandable for people, showed no difference from the others, being able to be applied in similar situations.
- 1 January 2024
- Published by Wiley in Journal of Engineering
- Vol. 2024 (1)
Open AccessComparative Analysis of Multicriteria Decision‐Making Methods for Bus Washing Process Selection: A Case Study
Water is at the core of sustainable development, and its use for human activities, including vehicle washing, should be done in a sustainable way. There are several technical solutions for washing buses offering different performances, making it difficult to choose the one that best meets the requirements of each specific case. The literature on the topic hardly analyzes the choice of the best technical solution for washing buses and does not apply and compare the results of different multicriteria decision‐making (MCDM) methods for the problem. The unique information available is from the different suppliers in the market. Whereby, this work intends to give a technical‐scientific contribution to fulfill this gaps. Therefore, the main objectives of this work are (1) to select the best sustainable technical solutions for washing buses depending on the specific conditions for a case study and (2) to analyze how different multicriteria decision‐making methods behave in the selection process. To achieve these objectives, the problem was approached as a case study in a public transport company in Portugal and the methodology followed the next steps: started with the identification of the different types of commercial technical solutions for washing buses; the company’s experts selected four main criteria: water consumption, operating costs, quality of washing, and time spent; the criteria weights were determined using the fuzzy‐AHP method; then four representative MCDM methods were selected, namely, AHP, ELECTRE, TOPSIS, and SMART; the ranks obtained for the four methods were compared; and a sensitivity analysis was performed. Considering the input data for the criteria and their weights, the results for all the methods showed that the best and the worst solution was the same, mobile portico with a brush and porticoes with three brushes, respectively. Furthermore, the results of the sensitivity analysis performed with disturbances for the weights of each criterion presented that the results are slightly affected and the similarity in rankings for the four MCDM methods was validated by Spearman’s rank correlation coefficient (rs) and Kendall’s coefficient of concordance (W). Considering these results, the SMART method, the less complex one, showed no difference from the others. For that reason, simple methods, such as SMART, in line with other works in the literature perform well in most cases. As a final remark of this work, it can be said that the methodology employed in this project can also be deemed applicable to other similar companies seeking technical solutions for bus or truck washing. Furthermore, the application of the SMART method, the less complex one and the most understandable for people, showed no difference from the others, being able to be applied in similar situations.