Shuo Wang
Research Subjects
Shuo Wang has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Denis Yau Wai Yu
Center for Green Research on Energy and Environmental Materials, National Institute for Materials Science (NIMS), Tsukuba, Ibaraki 305-0044, Japan
7 shared publications Pui-Kit Lee
6 shared publications- Xuming Yang
Graphene Composite Research Center, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, China
6 shared publications - Andrey L. Rogach
City University of Hong Kong
4 shared publications Denis Y.W. Yu
4 shared publicationsAndrey L. Rogach
2 shared publications
Latest Publications
- 1 March 2022
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 66, 133-139
Stabilizing sodium metal anode through facile construction of organic-metal interface
- 1 March 2022
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 66, 133-139
Stabilizing sodium metal anode through facile construction of organic-metal interface
- 1 September 2020
- Published by Elsevier in Journal of Power Sources
- Vol. 471
Engineering cathode-electrolyte interface of graphite to enable ultra long-cycle and high-power dual-ion batteries
- 1 September 2020
- Published by Elsevier in Journal of Power Sources
- Vol. 471
Engineering cathode-electrolyte interface of graphite to enable ultra long-cycle and high-power dual-ion batteries
- 1 August 2020
- Published by Elsevier in Journal of Power Sources
- Vol. 468
Slime-inspired polyacrylic acid-borax crosslinked binder for high-capacity bulk silicon anodes in lithium-ion batteries
- 1 August 2020
- Published by Elsevier in Journal of Power Sources
- Vol. 468
Slime-inspired polyacrylic acid-borax crosslinked binder for high-capacity bulk silicon anodes in lithium-ion batteries
- 16 September 2019
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 2 (10) , 7512-7517
Unlocking the True Capability of Graphite-Based Dual-Ion Batteries with Ethyl Methyl Carbonate Electrolyte
- 16 September 2019
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 2 (10) , 7512-7517
Unlocking the True Capability of Graphite-Based Dual-Ion Batteries with Ethyl Methyl Carbonate Electrolyte
- 24 April 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (19) , 11877-11885
Confined annealing-induced transformation of tin oxide into sulfide for sodium storage applications
Tin oxide/carbon is completely transformed into tin sulfide/carbon composite after a confined annealing treatment in sulfur vapor; thus, the practical capacity is drastically improved from 360 to 770 mA h g −1 . This improvement is explained based on their different sodiation mechanisms.
- 24 April 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (19) , 11877-11885
Confined annealing-induced transformation of tin oxide into sulfide for sodium storage applications
Tin oxide/carbon is completely transformed into tin sulfide/carbon composite after a confined annealing treatment in sulfur vapor; thus, the practical capacity is drastically improved from 360 to 770 mA h g −1 . This improvement is explained based on their different sodiation mechanisms.
- 1 April 2019
- Published by Elsevier in Nano Energy
- Vol. 58, 392-398
Direct conversion of metal-organic frameworks into selenium/selenide/carbon composites with high sodium storage capacity
- 1 April 2019
- Published by Elsevier in Nano Energy
- Vol. 58, 392-398
Direct conversion of metal-organic frameworks into selenium/selenide/carbon composites with high sodium storage capacity
- 6 March 2019
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 31 (7) , 2469-2475
Reversible Interaction of Sb with an Active Se Matrix Enhances the Cycle Stability of Electrodes for Lithium-Ion Batteries
- 6 March 2019
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 31 (7) , 2469-2475
Reversible Interaction of Sb with an Active Se Matrix Enhances the Cycle Stability of Electrodes for Lithium-Ion Batteries
- 29 January 2019
- Published by Wiley in Advanced Sustainable Systems
- Vol. 3 (4)
Polypyrrole and Carbon Nanotube Co‐Composited Titania Anodes with Enhanced Sodium Storage Performance in Ether‐Based Electrolyte
In terms of applications for sodium‐ion batteries, titania shows several compelling features, such as environmental availability, favorable sodiation potential, and long cycle lifespan, but it also possesses several drawbacks such as the low utilization and low initial coulombic efficiency (ICE). A double‐fold carbon incorporation strategy of improving titania anode materials, namely coating titania nanoparticles with polypyrrole (PPY) and integrating them into a carbon nanotube (CNT) network, is introduced. This treatment not only ensures direct contact of individual titania nanoparticles with the conductive components in the composite but also builds a 3D interconnecting CNT framework to facilitate both mass and charge transfer. The TiO2/PPY/CNT composite delivers reversible capacity of 252 and 201 mAh g−1 at 0.1 and 1 C, respectively; achieves an ICE of 70%, which is the highest value so far, in an ether‐based electrolyte; and retains nearly 80% of its capacity in a 3000‐cycle test. Co‐compositing titania with PPY and CNT guarantees both efficient electrical connection of active materials and resilience against cycling, and this strategy is feasible for various electrode materials which usually need carbon incorporation to improve capacity and stabilize cycling.
- 29 January 2019
- Published by Wiley in Advanced Sustainable Systems
- Vol. 3 (4)
Polypyrrole and Carbon Nanotube Co‐Composited Titania Anodes with Enhanced Sodium Storage Performance in Ether‐Based Electrolyte
In terms of applications for sodium‐ion batteries, titania shows several compelling features, such as environmental availability, favorable sodiation potential, and long cycle lifespan, but it also possesses several drawbacks such as the low utilization and low initial coulombic efficiency (ICE). A double‐fold carbon incorporation strategy of improving titania anode materials, namely coating titania nanoparticles with polypyrrole (PPY) and integrating them into a carbon nanotube (CNT) network, is introduced. This treatment not only ensures direct contact of individual titania nanoparticles with the conductive components in the composite but also builds a 3D interconnecting CNT framework to facilitate both mass and charge transfer. The TiO2/PPY/CNT composite delivers reversible capacity of 252 and 201 mAh g−1 at 0.1 and 1 C, respectively; achieves an ICE of 70%, which is the highest value so far, in an ether‐based electrolyte; and retains nearly 80% of its capacity in a 3000‐cycle test. Co‐compositing titania with PPY and CNT guarantees both efficient electrical connection of active materials and resilience against cycling, and this strategy is feasible for various electrode materials which usually need carbon incorporation to improve capacity and stabilize cycling.
- 14 September 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (40) , 34132-34139
Robust Micron-Sized Silicon Secondary Particles Anchored by Polyimide as High-Capacity, High-Stability Li-Ion Battery Anode
Silicon is an attractive high-capacity anode material for lithium-ion battery. With the help of nanostructures, cycling performance of silicon anode has improved significantly in the past couple of years. However, three major shortcomings associated with nanostructures still need to be addressed, namely, their high surface area, low tap density, and poor scalability. Herein, we present a facile and practical method to produce micron-sized Si secondary particle cluster (SiSPC) with a high tap density and a low surface area from bulk Si by high-energy ball-milling. By coupling SiSPC with a mechanically robust polyimide binder, more than 95% of the initial capacity is retained after 500 cycles at 3500 mA g–1 (1C rate). Reversibility of electrode thickness change is confirmed by in situ dilatometry. In addition, the polyimide binder suppresses the surface reaction of the particles with electrolyte, resulting in a high Coulombic efficiency of 99.7%. Excellent cycling performance is obtained even for thick electrodes with an areal capacity of 3.57 mAh cm–2, similar to those in commercial lithium-ion batteries. The presented Si electrode system has a high volumetric capacity of 598 mAh cm–3, which is higher than that of the commercial graphite anode materials.
- 14 September 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (40) , 34132-34139
Robust Micron-Sized Silicon Secondary Particles Anchored by Polyimide as High-Capacity, High-Stability Li-Ion Battery Anode
Silicon is an attractive high-capacity anode material for lithium-ion battery. With the help of nanostructures, cycling performance of silicon anode has improved significantly in the past couple of years. However, three major shortcomings associated with nanostructures still need to be addressed, namely, their high surface area, low tap density, and poor scalability. Herein, we present a facile and practical method to produce micron-sized Si secondary particle cluster (SiSPC) with a high tap density and a low surface area from bulk Si by high-energy ball-milling. By coupling SiSPC with a mechanically robust polyimide binder, more than 95% of the initial capacity is retained after 500 cycles at 3500 mA g–1 (1C rate). Reversibility of electrode thickness change is confirmed by in situ dilatometry. In addition, the polyimide binder suppresses the surface reaction of the particles with electrolyte, resulting in a high Coulombic efficiency of 99.7%. Excellent cycling performance is obtained even for thick electrodes with an areal capacity of 3.57 mAh cm–2, similar to those in commercial lithium-ion batteries. The presented Si electrode system has a high volumetric capacity of 598 mAh cm–3, which is higher than that of the commercial graphite anode materials.
- 1 September 2018
- Published by Elsevier in Materials Today Energy
- Vol. 9, 295-302
Polyimide-cellulose interaction in Sb anode enables fast charging lithium-ion battery application
- 1 September 2018
- Published by Elsevier in Materials Today Energy
- Vol. 9, 295-302
Polyimide-cellulose interaction in Sb anode enables fast charging lithium-ion battery application