Afif Zuhri Arfianto
Afif Zuhri Arfianto has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
Mohammad Basuki Rahmat
Dept. of Marine Electrical Engineering, Politeknik Perkapalan Negeri Surabaya, Surabaya, Indonesia
4 shared publicationsMuhammad Khoirul Hasin
Mechanical Engineering, Politeknik Perkapalan Negeri Surabaya, Indonesia
3 shared publicationsAhmad Mauludiyanto
Dept of Electrical Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
2 shared publicationsC R Handoko
Department of Marine Electrical Engineering, Politeknik Perkapalan Negeri Surabaya, Sukolilo, Surabaya, 60111, Indonesia
2 shared publicationsDenny Oktavina Radianto
2 shared publicationsDian Asa Utari
2 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Indonesian Society of Applied Science (ISAS) in Journal of Advanced Vocational Information and Communication Technology
- Vol. 1 (3) , 141-153
Implementation of a Kalman Filter to Improve RSSI-Based Trilateration Accuracy Using the LoRa RFM95W Module
Internet of Things (IoT)-based positioning has become increasingly important for monitoring and navigation applications. This study proposes a LoRa-based positioning system using Received Signal Strength Indicator (RSSI) measurements filtered by a Kalman Filter. The filtered RSSI values are converted into distance using the Log-Distance Path Loss model, while the target position is estimated through trilateration. Positioning accuracy is evaluated by comparing the estimated coordinates with GPS coordinates obtained from a u-blox NEO-6M module using the Haversine distance. Experimental results show that the Kalman Filter improves RSSI stability and reduces distance fluctuations, leading to more consistent position estimates. However, the positioning accuracy remains lower than GPS, particularly in dynamic environments. Despite this limitation, the proposed system demonstrates the potential of LoRa as a low-power, long-range positioning solution. Future work will focus on adaptive filtering methods to further improve positioning accuracy.
- 30 September 2026
- Published by Indonesian Society of Applied Science (ISAS) in Journal of Advanced Vocational Information and Communication Technology
- Vol. 1 (3) , 141-153
Open AccessImplementation of a Kalman Filter to Improve RSSI-Based Trilateration Accuracy Using the LoRa RFM95W Module
Internet of Things (IoT)-based positioning has become increasingly important for monitoring and navigation applications. This study proposes a LoRa-based positioning system using Received Signal Strength Indicator (RSSI) measurements filtered by a Kalman Filter. The filtered RSSI values are converted into distance using the Log-Distance Path Loss model, while the target position is estimated through trilateration. Positioning accuracy is evaluated by comparing the estimated coordinates with GPS coordinates obtained from a u-blox NEO-6M module using the Haversine distance. Experimental results show that the Kalman Filter improves RSSI stability and reduces distance fluctuations, leading to more consistent position estimates. However, the positioning accuracy remains lower than GPS, particularly in dynamic environments. Despite this limitation, the proposed system demonstrates the potential of LoRa as a low-power, long-range positioning solution. Future work will focus on adaptive filtering methods to further improve positioning accuracy.
- Open Access
- 1 January 2026
- Published by Faculty of Navigation in TransNav, the International Journal on Marine Navigation and Safety of Sea Transportation
- Vol. 20 (1) , 47-53
Navigational Safety Assessment in Benoa Channel Based on Course over Ground and Trajectory
This study evaluated ship berthing safety in Benoa Port using AIS data and the MMG model. Firstly, AIS data derived from the AIS receiver at Udayana University was analyzed based on the COG entropy method. Secondly, the trajectory of the Passenger Ship Celebrity Solstice, the largest ship in the port with 317.19 meters LOA and 36.9 meters width, was evaluated using the shortest distance to an obstacle based on the trajectory plotted from the AIS data. Finally, a Pure Car Carrier was simulated based on the Mathematical Maneuvering Group model to berth in the port to assess berthing safety in the Port. The COG entropy method is implemented in three positions in the port channel, the course-changing, course-keeping, and turning basing areas. The study shows that ship berthing safety using the COG entropy in all areas is at high risk. The shortest distances of the Celebrity Solstice and the Pure Car Carrier were to the obstacle of shallow water, less than the distance recommended by Innoe. Based on the maneuvering simulation results, the maximum wind and current speed for the port operation is recommended.
- 1 January 2026
- Published by Faculty of Navigation in TransNav, the International Journal on Marine Navigation and Safety of Sea Transportation
- Vol. 20 (1) , 47-53
Open AccessNavigational Safety Assessment in Benoa Channel Based on Course over Ground and Trajectory
This study evaluated ship berthing safety in Benoa Port using AIS data and the MMG model. Firstly, AIS data derived from the AIS receiver at Udayana University was analyzed based on the COG entropy method. Secondly, the trajectory of the Passenger Ship Celebrity Solstice, the largest ship in the port with 317.19 meters LOA and 36.9 meters width, was evaluated using the shortest distance to an obstacle based on the trajectory plotted from the AIS data. Finally, a Pure Car Carrier was simulated based on the Mathematical Maneuvering Group model to berth in the port to assess berthing safety in the Port. The COG entropy method is implemented in three positions in the port channel, the course-changing, course-keeping, and turning basing areas. The study shows that ship berthing safety using the COG entropy in all areas is at high risk. The shortest distances of the Celebrity Solstice and the Pure Car Carrier were to the obstacle of shallow water, less than the distance recommended by Innoe. Based on the maneuvering simulation results, the maximum wind and current speed for the port operation is recommended.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2706 (1)
Design and development of virtual digital assistant for fishers with fish distribution based on lora RFM95 communication
The waters region in Indonesia are immense and have a tremendous potential natural resource for marine businesses, especially fisheries. Many Indonesians, especially those living in coastal areas, make fishing their source of livelihood. Currently, the technology that is commonly used to support the work of fishers in catching fish is the Fish Finder. However, there are still very few Fish Finder users because the tools are too expensive and complicated for fishers to obtain. In this study, a Digital Virtual Assistant is created to communicate and navigate in the search for fish distribution. In addition, this tool can simplify the work of fishers and save fuel costs, so that it is beneficial in terms of the economy aspect. This tool works by receiving data from land with LoRa RFM95 communication which indicates the potential presence of fish. The device works based on Latitude and Longitude data from the Marine Research and Observation Center. By entering required data, Virtual Digital Assistant will show the distance and direction to the location of fish distribution. This is result of system testing, the GPS sensor used in the Digital Virtual Assistant Ublox NEO-7m has an accuracy level with an average distance value of 3.220921 meters. The communication distance using portable devices with PC systems using LoRa with 3dBi antennas can reach 1.41 kilometers in a condition without obstructions between nodes. The delay in updating the ship coordinate data on the interface has the lowest average of 30.8 seconds.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2706 (1)
Open AccessDesign and development of virtual digital assistant for fishers with fish distribution based on lora RFM95 communication
The waters region in Indonesia are immense and have a tremendous potential natural resource for marine businesses, especially fisheries. Many Indonesians, especially those living in coastal areas, make fishing their source of livelihood. Currently, the technology that is commonly used to support the work of fishers in catching fish is the Fish Finder. However, there are still very few Fish Finder users because the tools are too expensive and complicated for fishers to obtain. In this study, a Digital Virtual Assistant is created to communicate and navigate in the search for fish distribution. In addition, this tool can simplify the work of fishers and save fuel costs, so that it is beneficial in terms of the economy aspect. This tool works by receiving data from land with LoRa RFM95 communication which indicates the potential presence of fish. The device works based on Latitude and Longitude data from the Marine Research and Observation Center. By entering required data, Virtual Digital Assistant will show the distance and direction to the location of fish distribution. This is result of system testing, the GPS sensor used in the Digital Virtual Assistant Ublox NEO-7m has an accuracy level with an average distance value of 3.220921 meters. The communication distance using portable devices with PC systems using LoRa with 3dBi antennas can reach 1.41 kilometers in a condition without obstructions between nodes. The delay in updating the ship coordinate data on the interface has the lowest average of 30.8 seconds.
- Open Access
- 1 September 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1081 (1) , 012015
Development of the Elements of Tugboat Handling for Berthing and Unberthing of Container Ships
This paper provides a study on the procedure of tugboat handling for berthing and unberthing of container ships in the Port of Surabaya Container Terminal. The elements of the tugboat assistance consisted of time series of the percentage of tugboats’ power, the direction of the tug’s force, and the duration. This study developed a manoeuvring simulation program using the mathematical manoeuvring group (MMG) model to determine the handling elements to achieve the intended trajectory properly. The model considered the surging force, swaying force, and yawing moment of tugs, as well as the disturbances of current, wind, and wave. The planning trajectory is determined based on berthing and unberthing passages derived from the automatic identification system (AIS) data. The elements resulting in the berthing speed and berthing angle complied with the Permanent International Association of Navigation Congresses (PIANC).
- 1 September 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1081 (1) , 012015
Open AccessDevelopment of the Elements of Tugboat Handling for Berthing and Unberthing of Container Ships
This paper provides a study on the procedure of tugboat handling for berthing and unberthing of container ships in the Port of Surabaya Container Terminal. The elements of the tugboat assistance consisted of time series of the percentage of tugboats’ power, the direction of the tug’s force, and the duration. This study developed a manoeuvring simulation program using the mathematical manoeuvring group (MMG) model to determine the handling elements to achieve the intended trajectory properly. The model considered the surging force, swaying force, and yawing moment of tugs, as well as the disturbances of current, wind, and wave. The planning trajectory is determined based on berthing and unberthing passages derived from the automatic identification system (AIS) data. The elements resulting in the berthing speed and berthing angle complied with the Permanent International Association of Navigation Congresses (PIANC).
- Open Access
- 1 January 2021
- Published by INSTICC
- p. 1425-1430
State Management of API Web Service using Redux on React Native App
- 1 January 2021
- Published by INSTICC
- p. 1425-1430
Open AccessState Management of API Web Service using Redux on React Native App
- Open Access
- 18 December 2020
- Published by Society of Visual Informatics in JOIV : International Journal on Informatics Visualization
- Vol. 4 (4) , 219-224
Autopilot Unmanned Smart Boat Vehicle (AUSV) Communication with LoRa RFM95
Autopilot is a system control application on moving vehicles such as airplanes, helicopters, or boat, which serves to stabilize the direction of motion in the desired time and the programmed path's direction. the autopilot control system is controlled by a series of microcontrollers and GPS that has the function to be able to determine and the desired object. This control system is designed with electrical system controls that utilize microcontrollers, sensor  and GPS as control media. The development of autopilot prototypes is used for testing new control algorithms and the reliability of other electronic components such as sensors and microprocessors. A control system is needed to control the boat to its destination. The relatively accurate system dynamics model affects the steering performance of the autopilot system. The system in question can be considered a boat with an actuator rudder, which experiences external disturbances. this system is broadly divided into two parts: the control station part and the autonomous boat part. These two parts communicate with each other using LoRa device. The data sent from the control station to the autonomous boat is target latitude and longitude coordinates. The autonomous boat will send feedback in the form of boat latitude and longitude coordinates so that users can find out the current location of the boat. Autonomous Boat also provides feedback to the control station via LoRa in the form of boat coordinates so that users can find out the current location of the boat and whether the boat has reached the specified coordinates. The control station will send feedback from the boat to a database that can be monitored via the website to find out the boat's current condition on the website. Based on the  results that have been obtained in the analysis and testing of the system. GPS sensor used in autonomous boat Ublox NEO-7m has an accuracy level with an average distance value of 3.220921 meters with the lowest cold start time of 7 seconds.  Compass sensor used in autonomous boat CMPS11 has an accuracy level with an average value of 3.041667 degrees. Communication distance between autonomous boat and control station using LoRa with 5dBi antenna can reach 1406.79 meters in condition without obstruction between nodes.  Data delivery system can be successfully sent from user to autonomout boat and sending feedback back to user. Delay update of boat coordinate data on interface has the lowest average of 30.8 seconds. Based on turning circle test results, autonomous boat is able to create imperfect circles with a radius of 8,364 m.
- 18 December 2020
- Published by Society of Visual Informatics in JOIV : International Journal on Informatics Visualization
- Vol. 4 (4) , 219-224
Open AccessAutopilot Unmanned Smart Boat Vehicle (AUSV) Communication with LoRa RFM95
Autopilot is a system control application on moving vehicles such as airplanes, helicopters, or boat, which serves to stabilize the direction of motion in the desired time and the programmed path's direction. the autopilot control system is controlled by a series of microcontrollers and GPS that has the function to be able to determine and the desired object. This control system is designed with electrical system controls that utilize microcontrollers, sensor  and GPS as control media. The development of autopilot prototypes is used for testing new control algorithms and the reliability of other electronic components such as sensors and microprocessors. A control system is needed to control the boat to its destination. The relatively accurate system dynamics model affects the steering performance of the autopilot system. The system in question can be considered a boat with an actuator rudder, which experiences external disturbances. this system is broadly divided into two parts: the control station part and the autonomous boat part. These two parts communicate with each other using LoRa device. The data sent from the control station to the autonomous boat is target latitude and longitude coordinates. The autonomous boat will send feedback in the form of boat latitude and longitude coordinates so that users can find out the current location of the boat. Autonomous Boat also provides feedback to the control station via LoRa in the form of boat coordinates so that users can find out the current location of the boat and whether the boat has reached the specified coordinates. The control station will send feedback from the boat to a database that can be monitored via the website to find out the boat's current condition on the website. Based on the  results that have been obtained in the analysis and testing of the system. GPS sensor used in autonomous boat Ublox NEO-7m has an accuracy level with an average distance value of 3.220921 meters with the lowest cold start time of 7 seconds.  Compass sensor used in autonomous boat CMPS11 has an accuracy level with an average value of 3.041667 degrees. Communication distance between autonomous boat and control station using LoRa with 5dBi antenna can reach 1406.79 meters in condition without obstruction between nodes.  Data delivery system can be successfully sent from user to autonomout boat and sending feedback back to user. Delay update of boat coordinate data on interface has the lowest average of 30.8 seconds. Based on turning circle test results, autonomous boat is able to create imperfect circles with a radius of 8,364 m.
- Open Access
- 22 June 2020
- Published by Universitas Muhammadiyah Ponorogo in MULTITEK INDONESIA
- Vol. 14 (1) , 23-33
SISTEM PENGENDALI VALVE TANGKI BAHAN BAKAR PADA KAPAL BERBASIS FIBER MEDIA CONVERTER
SISTEM PENGENDALI VALVE TANGKI BAHAN BAKAR PADA KAPAL BERBASIS FIBER MEDIA CONVERTER
- 22 June 2020
- Published by Universitas Muhammadiyah Ponorogo in MULTITEK INDONESIA
- Vol. 14 (1) , 23-33
Open AccessSISTEM PENGENDALI VALVE TANGKI BAHAN BAKAR PADA KAPAL BERBASIS FIBER MEDIA CONVERTER
SISTEM PENGENDALI VALVE TANGKI BAHAN BAKAR PADA KAPAL BERBASIS FIBER MEDIA CONVERTER
- 23 May 2019
- Published by Politeknik Perkapalan Negeri Surabaya in Jurnal Teknologi Maritim
- Vol. 2 (1) , 23-30
RANCANG BANGUN TELEMETRI ARUS BEBAN PERALATAN ELEKTRONIK PADA RUANG PENUMPANG KAPAL FERRY BERBASIS LONG RANGE WIRELESS COMMUNICATIONS (LoRA)
Perkembangan teknologi informasi baik software dan hardware menunjang perkembangan dalam berbagai bidang khususnya dalam bidang elektronika. Kemajuan ini bisa dimanfaatkan dalam pembuatan sistem otomatisasi dan pengontrolan terhadap komponen-komponen elektronika dan listrik. Dengan meningkatnya kebutuhan pamantauan sistem secara real time, maka berkembang pula sebuah model yang lebih dari sekedar protabel yang dapat dibawa kemana – mana, yaitu dengan menggunakan sistem telemetri (pengukuran jarak jauh). Penelitian ini membuat prototipe yang digunakan untuk teknologi monitoring jarak jauh telemetri peralatan elektronik pada ruang penumpang kapal ferry dengan menggunakan wireless communications. Penggunaan radio frekuensi ini digunakan untuk peralatan elektronik yang lokasinya berada pada ruang penumpang..Sistem tersebut dibuat menggunakan sensor arus ACS 712 dan sensor tegangan ZMPT 101B untuk mengukur arus dan tegangan yang dimonitoring berbasis long range wireless communications (LoRa) untuk mejaga kekuatan sinyal penguat dan jarak yang dapat dicapai oleh LoRa tersebut. Dengan memanfaatkan frekuensi dari LoRa diharapkan dapat memonitoring arus beban dan tegangan yang dihasilkan oleh peralatan elektronik pada ruang penumpang kapal ferry tersebut. Dari alat monitoring tersebut didapatkan Hasil Pengujian pada beban TV 21 inch dengan daya 27 Watt dan tegangan 19 Volt didapatkan presentase error arus 4,91 % ,Presentase Error Tegangan 0,8 %, Presentase error Daya 4,2 %, Hasil Pengujian pada beban Kulkas Showcase dengan daya 170 W dan tegangan 220 Volt didapatkan presentase error arus 1,9 % ,Presentase Error Tegangan 0,7 %, Presentase error Daya 1,38 %, Hasil Pengujian pada beban AC daya 0.5 KW dan tegangan 220 Volt didapatkan presentase error arus 3 % ,Presentase Error Tegangan 2,16 %, Presentase error Daya 5 % dan dapat disimpulkan alat monitoring tersebut berjalan dengan baik.
- 23 May 2019
- Published by Politeknik Perkapalan Negeri Surabaya in Jurnal Teknologi Maritim
- Vol. 2 (1) , 23-30
RANCANG BANGUN TELEMETRI ARUS BEBAN PERALATAN ELEKTRONIK PADA RUANG PENUMPANG KAPAL FERRY BERBASIS LONG RANGE WIRELESS COMMUNICATIONS (LoRA)
Perkembangan teknologi informasi baik software dan hardware menunjang perkembangan dalam berbagai bidang khususnya dalam bidang elektronika. Kemajuan ini bisa dimanfaatkan dalam pembuatan sistem otomatisasi dan pengontrolan terhadap komponen-komponen elektronika dan listrik. Dengan meningkatnya kebutuhan pamantauan sistem secara real time, maka berkembang pula sebuah model yang lebih dari sekedar protabel yang dapat dibawa kemana – mana, yaitu dengan menggunakan sistem telemetri (pengukuran jarak jauh). Penelitian ini membuat prototipe yang digunakan untuk teknologi monitoring jarak jauh telemetri peralatan elektronik pada ruang penumpang kapal ferry dengan menggunakan wireless communications. Penggunaan radio frekuensi ini digunakan untuk peralatan elektronik yang lokasinya berada pada ruang penumpang..Sistem tersebut dibuat menggunakan sensor arus ACS 712 dan sensor tegangan ZMPT 101B untuk mengukur arus dan tegangan yang dimonitoring berbasis long range wireless communications (LoRa) untuk mejaga kekuatan sinyal penguat dan jarak yang dapat dicapai oleh LoRa tersebut. Dengan memanfaatkan frekuensi dari LoRa diharapkan dapat memonitoring arus beban dan tegangan yang dihasilkan oleh peralatan elektronik pada ruang penumpang kapal ferry tersebut. Dari alat monitoring tersebut didapatkan Hasil Pengujian pada beban TV 21 inch dengan daya 27 Watt dan tegangan 19 Volt didapatkan presentase error arus 4,91 % ,Presentase Error Tegangan 0,8 %, Presentase error Daya 4,2 %, Hasil Pengujian pada beban Kulkas Showcase dengan daya 170 W dan tegangan 220 Volt didapatkan presentase error arus 1,9 % ,Presentase Error Tegangan 0,7 %, Presentase error Daya 1,38 %, Hasil Pengujian pada beban AC daya 0.5 KW dan tegangan 220 Volt didapatkan presentase error arus 3 % ,Presentase Error Tegangan 2,16 %, Presentase error Daya 5 % dan dapat disimpulkan alat monitoring tersebut berjalan dengan baik.
- Open Access
- 20 May 2019
- Published by Politeknik Perkapalan Negeri Surabaya in Jurnal Cakrawala Maritim
- Vol. 2 (1)
SOSIALISASI METODE PENGAMBILAN TITIK KOORDINAT SISWA BERBASIS OPEN CAMERA DAN GOOGLE MAPS
Di setiap tahun pelajaran baru setiap lembaga pendidikan melaksanakan Penerimaan Peserta Didik Baru (PPDB). Salah satu sistem baru PPDB yang di mulai sejak tahun 2017 oleh Kementerian Pendidikan dan Kebudayaan yaitu sistem zonasi. Sistem zonasi mengharuskan sekolah negeri untuk memberi kesempatan yang lebih besar kepada siswa yang rumahnya dekat dengan sekolah untuk diterima di sekolah tersebut. Hal ini bertujuan untuk pemerataan pendidikan yang berkualitas. Dalam sistem zonasi pemeringkatan siswa yang diterima berdasarkan jarak rumah siswa dengan sekolah tujuannya. Untuk mengetahui jarak rumah siswa dan sekolahnya diperlukan titik koordinat rumah siswa. Untuk itu diperlukan kegiatan sosialisasi kepada para guru dan orang tua tentang metode pengambilan koordinat rumah siswa. Sosialisasi dilakukan dengan materi bagaimana cara menentukan titik koordinat rumah siswa dengan melalui Google Maps atau dengan menggunakan aplikasi Open Camera. Kegiatan ini dilakukan di Kabupaten Mojokerto. Secara demografis Kabupaten Mojokerto terdiri dari tiga tipe wilayah yaitu urban, sub-urban, dan rural. Dalam sosialisasi ini, untuk daerah urban dan sub-urban direkomendasikan menggunakan Open Camera dan Google Maps. Namun untuk daerah rural disarankan menggunakan Open Camera. Hal ini dikarenakan pada daerah urban dan sub-urban masyarakatnya memiliki tingkat penguasaan teknologi informasi dan komunikasi serta infrastruktur akses internet yang baik dibandingkan dengan daerah rural.
- 20 May 2019
- Published by Politeknik Perkapalan Negeri Surabaya in Jurnal Cakrawala Maritim
- Vol. 2 (1)
Open AccessSOSIALISASI METODE PENGAMBILAN TITIK KOORDINAT SISWA BERBASIS OPEN CAMERA DAN GOOGLE MAPS
Di setiap tahun pelajaran baru setiap lembaga pendidikan melaksanakan Penerimaan Peserta Didik Baru (PPDB). Salah satu sistem baru PPDB yang di mulai sejak tahun 2017 oleh Kementerian Pendidikan dan Kebudayaan yaitu sistem zonasi. Sistem zonasi mengharuskan sekolah negeri untuk memberi kesempatan yang lebih besar kepada siswa yang rumahnya dekat dengan sekolah untuk diterima di sekolah tersebut. Hal ini bertujuan untuk pemerataan pendidikan yang berkualitas. Dalam sistem zonasi pemeringkatan siswa yang diterima berdasarkan jarak rumah siswa dengan sekolah tujuannya. Untuk mengetahui jarak rumah siswa dan sekolahnya diperlukan titik koordinat rumah siswa. Untuk itu diperlukan kegiatan sosialisasi kepada para guru dan orang tua tentang metode pengambilan koordinat rumah siswa. Sosialisasi dilakukan dengan materi bagaimana cara menentukan titik koordinat rumah siswa dengan melalui Google Maps atau dengan menggunakan aplikasi Open Camera. Kegiatan ini dilakukan di Kabupaten Mojokerto. Secara demografis Kabupaten Mojokerto terdiri dari tiga tipe wilayah yaitu urban, sub-urban, dan rural. Dalam sosialisasi ini, untuk daerah urban dan sub-urban direkomendasikan menggunakan Open Camera dan Google Maps. Namun untuk daerah rural disarankan menggunakan Open Camera. Hal ini dikarenakan pada daerah urban dan sub-urban masyarakatnya memiliki tingkat penguasaan teknologi informasi dan komunikasi serta infrastruktur akses internet yang baik dibandingkan dengan daerah rural.
- 20 May 2019
- Published by Politeknik Perkapalan Negeri Surabaya in Jurnal Cakrawala Maritim
- Vol. 2 (1) , 1-6
PENGEMBANGAN UKM DESA MITRA PPNS UNTUK MENINGKATKAN DAYA SAING PRODUK DAN KESADARAN BERBUDAYA LINGKUNGAN MARITIM
Indonesia merupakan Negara dengan sebagian besar wilayahnya berfokus pada kelautan. Salah satu penyokong kemaritiman di Indonesia adalah masyarakat pesisir yang memiliki andil secara makro pada pengembangan di Indonesia. Turut serta dalam memperbaiki keadaan sosial serta kemanusiaan di masyarakat pesisir merupakan langkah kognitif yang seharusnya dipilih untuk kelangsungan tahap awal dalam mengembangkan kemaritiman Indonesia. Kegiatan pengabdian masyarakat yang dilakukan oleh BEM PPNS berupa Desa Mitra Pesisir yang berada di Desa Macajah kabupaten Bangkalan Madura. Desa Mitra pesisir adalah solusi untuk pengangkatan dan penunjang pembangunan pada sektor maritim karena masyarakat pesisir yang memiliki peran penting dalam kemaritiman negeri. Adapun kegiatan yang dilakukan di Desa Mitra sendiri adalah resik pantai, sosialisasi kompos, sosialiasi pemasaran dan packaging. Kegiatan resik pantai yang dilakukan adalah membersihkan pantai dari segala sampah dan kotoran yang mengganggu ekosistem pantai. Kegiatan sosialisasi kompos dilakukan dengan membuat kompos dari sampah organik. Kegiatan sosialisasi pemasaran memberikan sosialisasi perihal packaging agar peserta home industry mendapatkan pengetahuan dan menghasilkan output yang berdaya saing dan bernilai jual tinggi
- 20 May 2019
- Published by Politeknik Perkapalan Negeri Surabaya in Jurnal Cakrawala Maritim
- Vol. 2 (1) , 1-6
PENGEMBANGAN UKM DESA MITRA PPNS UNTUK MENINGKATKAN DAYA SAING PRODUK DAN KESADARAN BERBUDAYA LINGKUNGAN MARITIM
Indonesia merupakan Negara dengan sebagian besar wilayahnya berfokus pada kelautan. Salah satu penyokong kemaritiman di Indonesia adalah masyarakat pesisir yang memiliki andil secara makro pada pengembangan di Indonesia. Turut serta dalam memperbaiki keadaan sosial serta kemanusiaan di masyarakat pesisir merupakan langkah kognitif yang seharusnya dipilih untuk kelangsungan tahap awal dalam mengembangkan kemaritiman Indonesia. Kegiatan pengabdian masyarakat yang dilakukan oleh BEM PPNS berupa Desa Mitra Pesisir yang berada di Desa Macajah kabupaten Bangkalan Madura. Desa Mitra pesisir adalah solusi untuk pengangkatan dan penunjang pembangunan pada sektor maritim karena masyarakat pesisir yang memiliki peran penting dalam kemaritiman negeri. Adapun kegiatan yang dilakukan di Desa Mitra sendiri adalah resik pantai, sosialisasi kompos, sosialiasi pemasaran dan packaging. Kegiatan resik pantai yang dilakukan adalah membersihkan pantai dari segala sampah dan kotoran yang mengganggu ekosistem pantai. Kegiatan sosialisasi kompos dilakukan dengan membuat kompos dari sampah organik. Kegiatan sosialisasi pemasaran memberikan sosialisasi perihal packaging agar peserta home industry mendapatkan pengetahuan dan menghasilkan output yang berdaya saing dan bernilai jual tinggi