Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Katarzyna Topczewska has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Friction-Induced Thermal Effects in an FGM Layer in Contact with a Homogeneous Layer

    by Katarzyna Topczewska

    An analytical model of frictional heat transfer during the uniform sliding of two layers is proposed. One layer is composed of a functionally graded material (FGM) with a thermal conductivity coefficient that varies exponentially across its thickness, while the second layer is homogeneous, with constant thermophysical properties. The thermal problem of friction is formulated as an initial boundary value problem of heat conduction, accounting for the thermal contact conductance and convective heat exchange with the environment. An exact solution for constant friction power was obtained using the Laplace integral transform, supplemented by an asymptotic form for the initial stage of heating. Based on these analytical solutions, a comprehensive study was carried out for a frictional system comprising a ceramic–metal FGM composite in contact with a homogeneous friction material. A dimensional analysis allowed for both a qualitative and quantitative investigation into the influence of contact conductance, convective heat exchange, layer thickness and the FGM gradient parameter on the temperature evolution and distribution, as well as the time to reach the steady state. It was demonstrated that the implementation of an appropriately graded material can substantially improve thermal operating conditions by enhancing heat dissipation into the material bulk and intensifying convective cooling.


  • Open Access

    Frictional Heating During Sliding of Two Layers Made of Different Materials

    by Katarzyna Topczewska, Aleksander Yevtushenko, Przemysław Zamojski

    The non-stationary heat problem of friction for two homogeneous layers with imperfect thermal contact and convective heat exchange on the free surfaces is considered. Assuming a constant specific power of friction, an exact solution of the formulated problem is obtained using the Laplace integral transform. The solution is verified by checking the fulfillment of the boundary and initial conditions both in the transform space as well as in the space of the original. Particular solutions are also derived for some specific cases, namely, the perfect thermal contact of friction at large values of the contact heat transfer coefficient and the asymptotic solution at the initial time moments of the heating process. On the basis of developed solutions, numerical analysis was performed in dimensionless form. The influence of the thermal contact conductance, the convective cooling intensity, and the relative layer thickness on the temperature field is investigated. It was established that for Biot number Bi≥50 yields nearly equal surface temperatures.


  • Open Access

    The Mutual Influence of Thermal Contact Conductivity and Convective Cooling on the Temperature Field in a Tribosystem with a Functionally Graded Strip

    by Aleksander Yevtushenko, Katarzyna Topczewska, Przemysław Zamojski

    An analytical model to find the temperature field that has been developed for friction systems consists of a strip and semi-space. The strip is made of a two-component functionally graded material (FGM) with an exponentially changing coefficient of thermal conductivity. In contrast, the material of the semi-space is homogeneous. An appropriate boundary-value problem of heat conduction with constant specific friction power was formulated and solved using the Laplace integral transform method. The model takes into consideration the imperfect thermal friction contact between the strip and the semi-space, and also the convective cooling on the exposed surface of the strip. The appropriate asymptotic solutions to this problem for low and high values of Fourier number were obtained. It is shown how the determined exact solution can be generalized using Duhamel’s formula for the case of a linearly reduction in time-specific friction power (a braking process with constant deceleration). Numerical analysis for selected materials of the friction pair was carried out in terms of examining the mutual impact on the temperature of the two Biot numbers, characterizing the intensity of the thermal contact conductivity and convective heat exchange on the exposed surface of the strip. The obtained results can be used to predict the temperature of friction systems containing elements made of FGM. In particular, such systems include modern disc braking systems.


  • Open Access

    Effect of Convective Cooling on the Temperature in a Friction System with Functionally Graded Strip

    by Aleksander Yevtushenko, Michał Kuciej, Katarzyna Topczewska, Przemysław Zamojski

    An exact solution of the boundary-value problem of heat conduction was obtained with consideration of heat generation due to friction and convective cooling for the strip/semi-space system. Analytical solutions to this problem are known for the case with both friction elements made of homogeneous materials or a composite layer with a micro-periodic structure. However, in this study, the strip is made of a two-component functionally gradient material (FGM). In addition, the exact, asymptotic solutions were also determined at small and large values of the Fourier number. By means of Duhamel’s theorem, it was shown that the developed solution for a constant friction power allows to obtain appropriate solutions with a changing time profile of this value during heating. Numerical analysis in dimensionless form was carried out for the FGM (ZrO2—Ti-6Al-4V) strip in combination with the cast iron semi-space. The influence of the convective cooling intensity (Biot number) on the temperature field in the considered friction system was investigated. The developed mathematical model allows for a quick estimation of the maximum temperature of systems, in which one of the elements (FGM strip) is heated on the friction surface and cooled by convection on the free surface.


  • Open Access

    Influence of Functionally Graded Protective Coating on the Temperature in a Braking System

    by Aleksander Yevtushenko, Katarzyna Topczewska, Przemysław Zamojski

    A mathematical model of heat generation due to friction in a disc–pad braking system was developed with consideration of a thermal barrier coating (TBC) on the friction surface of the disc. The coating was made of functionally graded material (FGM). The three-element geometrical scheme of the system consisted of two homogeneous half-spaces (pad and disc) and a functionally graded coating (FGC) deposited on the friction surface of the disc. It was assumed that the frictional heat generated on the coating-pad contact surface was absorbed to the insides of friction elements along the normal to this surface. Thermal contact of friction between the coating and the pad as well as the heat contact between the coating and the substrate were perfect. On the basis of such assumptions, the thermal friction problem was formulated, and its exact solution was obtained for constant and linearly descending specific friction power over time. For the first case, the asymptotic solutions for small and large values of time were also found. A numerical analysis was performed on an example of the system containing a metal ceramic (FMC-11) pad, sliding on the surface of a FGC (ZrO2–Ti-6Al-4V) applied on a cast iron (ChNMKh) disc. It was established that the application of a TBC made of FGM on the surface of a disc could effectively reduce the level of temperature achieved during braking.


  • Open Access

    Use of Functionally Graded Material to Decrease Maximum Temperature of a Coating–Substrate System

    by Aleksander Yevtushenko, Katarzyna Topczewska, Przemysław Zamojski

    A mathematical model for determining the temperature distribution in the system consisting of a coating deposited on the surface of substrate was proposed. The foundation material is homogeneous, while the coating is made of a functionally gradient material (FGM) with thermal conductivity increasing exponentially along the thickness. Heating processes of the outer surface of the coating were considered with a constant and linearly decreasing in time intensity of the heat flux. Such thermal loads are common in thermal problems of friction, particularly regarding frictional heating during braking. An exact (in quadrature) solution of the corresponding boundary-value problems of parabolic heat conduction was obtained. Asymptotic solutions to these problems were also found for small and large values of the Fourier number. Calculations were performed for a coating made of two-component FGM ZrO2—Ti-6Al-4V, applied on a cast iron substrate. In order to explain the effect of FGM on temperature, corresponding analysis was carried out for the coating made of a homogeneous (ZrO2) material.


  • Open Access

    Temperature during Repetitive Short-Term Operation of a Brake with Functionally Graded Friction Element

    by Aleksander Yevtushenko, Katarzyna Topczewska, Przemysław Zamojski

    The object of study is the temperature of a braking system, operating in repetitive short-term (RST) mode. One element of the considered friction pair is made of a functionally gradient material (FGM), and the other of a homogeneous material. To determine the temperature on the friction surfaces of both elements, the previously obtained, exact solution of the boundary value problem of heat conduction was adopted, with account of the heat generation due to the friction. A calculation scheme was proposed that takes into consideration thermal sensitivity of materials and variations of the friction coefficient under the influence of temperature. Calculations were performed for two-component FGM (ZrO2–Ti-6Al-4V) in combination with gray cast iron (ChNMKh). It was found that for selected friction pair materials, consideration of their thermal sensitivity reduces the time of braking and the value of temperature achieved on the friction surfaces. At the same time, the whole process was characterized by a good stability of braking with a slight decrease in efficiency in each subsequent cycle.


  • Open Access

    Analytical Model of the Frictional Heating in a Railway Brake Disc at Single Braking with Experimental Verification

    by Katarzyna Topczewska, Juraj Gerlici, Aleksander Yevtushenko, Michał Kuciej, Kateryna Kravchenko

    A one-dimensional thermal problem of friction was formulated, taking into account the contact pressure increase at the beginning of the process. The obtained solution to this problem allows for the quick calculation of the transient temperature distribution in a railway brake disc during single braking application. In order to validate the developed model, the experimental tests were performed for two friction pairs consisting of the cast iron brake disc and pads comprising two composite materials. Theoretical results were compared with the data measured by thermocouples embedded in the brake disc during the full-size dynamometer tests. The maximum temperature values found based on the analytical solution are convergent with the corresponding empirical data. The consistency of the results obtained for two friction couples demonstrates the usefulness of the proposed computational model.


  • Open Access

    The Heat Partition Ratio during Braking in a Functionally Graded Friction Couple

    by Aleksander Yevtushenko, Katarzyna Topczewska, Przemysław Zamojski

    The theoretical scheme for determining the heat partition ratio (HPR) in a friction couple made of functionally graded materials (FGMs) was proposed. As a result, the formula for the calculation of the HPR was found, which depends on the thermal properties and the parameters of the material’s gradient. In specific cases of these parameters, the known formulas for estimating the HPR for homogeneous materials were obtained. Calculations were carried out for the friction couple consisting of the following two-component FGMs: Al2O3–Cu (first body) and ZrO2–Ti–6Al–4V (second body), under the conditions corresponding to a single braking with a constant deceleration. It was established that the vast majority (almost 90%) of heat that was generated by friction was absorbed by the first body in the selected couple. The possibilities of using the obtained results were discussed herein.


  • Open Access

    Temperature in the Friction Couple Consisting of Functionally Graded and Homogeneous Materials

    by Aleksander Yevtushenko, Michał Kuciej, Katarzyna Topczewska, Przemysław Zamojski

    An analytical model was developed to determine the temperature of friction coupling, in which one element was made of a functionally graded material (FGM) and the other was homogeneous. First, for such a system, the boundary–value problem of heat conduction was formulated with consideration of the heat generation due to friction. Then, using the Laplace integral transform, an exact solution to this problem was obtained for uniform sliding, and braking with constant deceleration. A numerical analysis was performed for the selected friction pair consisting of the FGM (zircon dioxide + titanium alloy) and cast iron. It was established that the use of elements made of a FGM consisting of ZrO2 and Ti-6Al-4V can significantly reduce the maximum temperature achieved in the friction system.