ARAshiqur Rahman

Ashiqur Rahman

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ashiqur Rahman has a total of 65 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Molecular Dynamics Study of Liquid Condensation on Nano-structured Sinusoidal Hybrid Wetting Surfaces

    by Taskin Mehereen, Shorup Chanda, Afrina Ayrin Nitu, Jubaer Tanjil Jami, Rafia Rizwana Rahim, Ashiqur Rahman

    Although real surfaces exhibit intricate topologies at the nanoscale, rough surface consideration is often overlooked in nanoscale heat transfer studies. Superimposed sinusoidal functions effectively model the complexity of these surfaces. This study investigates the impact of sinusoidal roughness on liquid argon condensation over a functional gradient wetting (FGW) surface with 84% hydrophilic content using molecular dynamics simulations. Argon atoms are confined between two platinum substrates: a flat lower substrate heated to 130K and a rough upper substrate at 90K. Key metrics of the nanoscale condensation process, such as nucleation, surface heat flux, and total energy per atom, are analyzed. Rough surfaces significantly enhance nucleation, nearly doubling cluster counts compared to smooth surfaces and achieving a more extended atomic density profile with a peak of approximately and improved heat flux. Stronger atom-surface interactions also lead to more efficient energy dissipation. These findings underscore the importance of surface roughness in optimizing condensation and heat transfer, offering a more accurate representation of surface textures and a basis for designing surfaces that achieve superior heat transfer performance.

  • Open Access

    A Computational Approach to Evaluate the Effect of Shelter Construction Material and Fuel Load on the Fire Spread Behavior in Rohingya Refugee Camp

    by Fahad Hossain Mishu, Rafia Rizwana Rahim, Ashiqur Rahman

    Numerous fires break out, especially from January to March every year, destroying thousands of shelters in the Rohingya Refugee Camps. In this study, a computational approach has been taken to analyze the fire dynamic behavior of informal settlements (ISs) in Rohingya Refugee Camps. The design parameters for the mathematical model are determined based on a comprehensive survey carried out in Rohingya Refugee Camps in Cox's Bazar, Bangladesh. This survey is conducted on three camps having distinctive fuel features, i.e., Kutupalong Registered Camp (KRC), Camp 5, and Camp 4 Extension (Ex), in order to accumulate data on the type, density, arrangement of fuel, etc. Using the dataset of almost 500 shelters having 42 fuel characteristics features, simplified small scale representation of each camp under fire had been modelled in Fire Dynamic Simulator (FDS). It is found that Camp 5 is more vulnerable to fire hazard than Camp 4 Ex and KRC because of the dense fuel arrangement, bamboo structure and negligible separation distance between ISs. KRC's brick exterior acts as a fire barrier, and thereby despite having the largest internal fuel load of all three camps, prevents further spreading of fire from the ignited enclosure. It is also found that type of building material and separation distance are crucial for fire spread and increasing fuel load density causes the ceiling temperature to rise higher and the flashover point to approach faster. The findings of our study can be helpful for informed decision making of fire safety measures in the Rohingya Refugee Camps.

  • Effect of Morphology and Concentration of Two Carbon Allotropes on the Enhancement of Specific Heat Capacity of Eutectic Molten Salt

    by Nusrat Jahan Salim, Md. Ashiqur Rahman, Shakhawat H. Firoz

    This study aims at investigating the effect of nanoparticle morphology and concentration on the specific heat capacity of a molten salt used as thermal energy storage material in concentrated solar power plants. Binary carbonate salt eutectic (lithium carbonate and potassium carbonate at a molar ratio of 62:38, respectively) is used as the base material. Two different carbon allotropes, graphite nanoparticles (Gp) and carbon nanotube (CNT) are used as dopants to look into the morphological effect on specific heat (Cp). A series of experiments are carried out to systematically investigate the effect of nanoparticle concentration by varying the mass percentages of carbon allotropes (2 wt.%, 4 wt.%, and 6 wt.%) in the base material. The specific heat capacity of the samples is measured both in solid (250 °C and 400 °C) and liquid phases (520°–560 °C) using a differential scanning calorimeter (DSC). The results show a maximum enhancement of 35% in Cp for 6 wt.% Gp -based salt in the liquid phase. CNT-based nanomaterials exhibit a maximum enhancement of 20% for 4 wt.% CNT inclusion in the liquid phase. The superior performance of Gp compared to CNT and mass concentration-controlled specific heat is explained using field emission scanning electron microscope (FESEM) and energy-dispersive X-ray spectroscopy (EDS) analysis. FESEM and EDS analysis confirm the presence and the composition of the compressed layer, respectively. These layers are considered to be responsible for the anomalous increase in specific heat capacity at different mass concentrations for the carbon allotropes.


  • Open Access

    Modelling the causes of boiler accidents: implications for economic and social sustainability at the workplace

    by Ashiqur Rahman, Chitra Lekha Karmaker, Tazim Ahmed, Ikram Khan, A.K.M Monjur Morshed, Syed Mithun Ali


  • Open Access

    Fabrication of zinc oxide/graphene-carbon nanotubes nanocomposite with enhanced dye degradation ability

    by Intekhab Alam, Minaruzzaman, Ashiqur Rahman, M. A. Basith

    A comparative study between zinc oxide graphene-carbon nanotubes nanocomposite and ZnO nanoparticles was carried out to investigate their abilities in the degradation of Rhodamine B dye. We utilized the Modified Hummer method to prepare the graphene oxide nanosheet. Moreover, graphene-carbon nanotubes had been synthesized from GO and multi-walled carbon nanotubes with a hydroxyl group. The hydrothermal method was employed to fabricate the zinc oxide graphene-carbon nanotubes nanocomposite from ZnO nanoparticles and graphene-carbon nanotubes. During the characterization by X-ray Diffraction (XRD), all the significant peaks of ZnO and zinc oxide graphene-carbon nanotubes nanocomposite were found in the same phase angle. In addition, the final nanocomposite was also characterized by Field Emission Scanning Electron Microscope (FESEM) and Energy Dispersive X-ray Spectroscopy (EDS). Finally, from the dye degradation test, it was apparent that zinc oxide graphene-carbon nanotubes nanocomposite showed superior dye removal ability compared to the ZnO nanoparticles.

  • Electrode surface modification of graphene-MnO2 supercapacitors using molecular dynamics simulations

    by Musanna Galib, Mohammad Mozammal Hosen, Joyanta K. Saha, Mominul Islam, Shakhawat H. Firoz, Ashiqur Rahman

    In this study, molecular dynamics (MD) simulations have been performed to explore the variation of ion density and electric potential due to electrode surface modification. Two different surface morphologies, having planer and slit pore with different conditions of surface charge, have been studied for graphene-MnO2 surface using LAMMPS. For different pore widths, the concentration of ions in the double layer is observed to be very low when the surface of the graphene-MnO2 electrode is charged. With a view to identify the optimal pore size for the simulation domain considered, three different widths for the nano-slit type pores and the corresponding ion-ion interactions are examined. Though this effect is negligible for pores with 9.23 and 3.55 Å widths, a considerable increase in the ionic concentration within the 7.10 Å pores is observed when the electrode is kept neutral. The edge region of these nano-slit pores leads to effective energy storage by promoting ion separation and a significantly higher charge accumulation is found to occur on the edges compared to the basal planes. For the simulation domain of the present study, partition coefficient is maximum for a pore size of 7.10 Å, indicating that the ions’ penetration and movement into nano-slit pores are most favorable for this optimum pore size for MnO2-graphene electrodes with aqueous NaCl electrolyte. The importance of understanding the commercial feasibility of supercapacitor material has made qualitatively predicting the optimized electrode structure one of the main targets of energy related researches. While great progress has been made in recent years, a coherent theoretical picture of the optimized electrode structure remains elusive. This article discusses the most favorable design of supercapacitor electrode for ion-electrode interaction.


  • A first principle study of the structural, electronic, and temperature-dependent thermodynamic properties of graphene/MoS2 heterostructure

    by Tanver Hossain, Ashiqur Rahman

    After an initial assessment of the structural and electronic properties of graphene, monolayer MoS2, and graphene/MoS2 bilayer hetero-structure, the temperature-dependent thermodynamic properties of graphene/MoS2 bilayer hetero-structure are examined by using density functional theory calculations. The structure, bandgap, partial density of states, and thermodynamic properties of graphene, monolayer MoS2 and graphene/MoS2 system are investigated and analyzed. Findings from the present study are in good agreement with the previously reported theoretical and experimental studies. Monolayer MoS2 and graphene form a stable Van der Waals heterostructure owing to their negative binding energy, and the system acts as a zero-bandgap semiconductor. Debye temperature and the heat capacity of graphene, MoS2 monolayer, and graphene/MoS2 system are calculated from phonon dispersion relations to be 2100 K, 600 K, and 1400 K, and 0.7 J/g.K, 0.218 J/g.K, and 0.46 J/g.K, respectively. Introduction of graphene into the MoS2 semiconductor is, therefore, found to improve the overall thermodynamic properties of the composite as graphene preserved its superior thermal properties. The findings will be beneficial to calculate thermal conductivity of the graphene/MoS2 heterostructure for minimizing the temperature effect in electronic or optoelectronic devices.