Basma Mohamed Omar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Basma Mohamed Omar has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Yifeng Zhang
Technical University of Denmark
4 shared publications - Irini Angelidaki
Department of Chemical and Biochemical Engineering, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark
3 shared publications - Mervat A. El-Sonbati
Faculty of Science, Environmental Sciences Department, Damietta University, Damietta, Egypt
3 shared publications Hala Fakhry
Polymer Materials Research Department, Advanced Technology and New Materials Research Institute (ATNMRI), City of Scientific Research and Technological Applications (SRTA-City), Alexandria, Egypt
2 shared publications- Ioannis A. Fotidis
Department of Hydraulics, Soil Science and Agricultural Engineering, School of Agriculture, Aristotle University of Thessaloniki, Greece
2 shared publications - Maie El-Gammal
Department of Environmental Sciences, Faculty of Science, Damietta University, 34517 Damietta, Egypt
2 shared publications
Latest Publications
- Open Access
- 1 June 2025
- Published by Egyptian Knowledge Bank in Egyptian Journal of Soil Science
- Vol. 65 (2) , 779-797
Sediment Quality Assessment of Polycyclic Aromatic Hydrocarbons in Lake Edku, Egypt
Contamination of coastal lakes in Egypt is of great public concern due to its potential risk to ecosystem and human health. Lake Edku is one of the most significant lakes in northern Egypt that serving various purposes, including water supply, food security, recreational activities, and industrial applications. Contamination of lakes sediments with polycyclic aromatic hydrocarbons degrades water quality and affects the aquatic organisms, which in turn impacts human and the health of the whole aquatic ecosystem in the long term. Therefore, sixteen sediment samples were collected from Lake Edku through the spring and summer seasons of year 2022 and investigated to ascertain the concentrations, sources, toxicity, and ecological risk of polycyclic aromatic hydrocarbons. The concentrated urban pollutant discharge sources were reflected in the lower concentrations of total PAHs in the northern region compared to the southern region. Results revealed the predominance of 3 and 4 PAH rings in the collected samples. Low molecular weight LMW PAHs were dominant, with a percentage of 70% during spring and 67% during summer. Ant/ (Ant + Phe) ratio results showed that the source of PAHs in sediment is related to petroleum sources during spring and summer. While, BaA/BaA/ (BaA + Chry) ratio shows the sources of burning coal, grass, and wood. For the majority of stations, InP/ (InP + BgP) and Flu/ (Flu + Pyr) ratios indicated fuel combustion for most stations. The ratio of High molecular weight HMW to LMW suggested a petrogenic input. The results indicated a diversity of pollution sources of PAH, and according to toxicity and ecological risk assessment the recorded concentrations of PAHs in the sediment samples do not represent any potential environmental harm. The results of the present study can pave the way for managing, reducing pollution levels, and preventing environmental deterioration in Lake Edku.
- 1 June 2025
- Published by Egyptian Knowledge Bank in Egyptian Journal of Soil Science
- Vol. 65 (2) , 779-797
Open AccessSediment Quality Assessment of Polycyclic Aromatic Hydrocarbons in Lake Edku, Egypt
Contamination of coastal lakes in Egypt is of great public concern due to its potential risk to ecosystem and human health. Lake Edku is one of the most significant lakes in northern Egypt that serving various purposes, including water supply, food security, recreational activities, and industrial applications. Contamination of lakes sediments with polycyclic aromatic hydrocarbons degrades water quality and affects the aquatic organisms, which in turn impacts human and the health of the whole aquatic ecosystem in the long term. Therefore, sixteen sediment samples were collected from Lake Edku through the spring and summer seasons of year 2022 and investigated to ascertain the concentrations, sources, toxicity, and ecological risk of polycyclic aromatic hydrocarbons. The concentrated urban pollutant discharge sources were reflected in the lower concentrations of total PAHs in the northern region compared to the southern region. Results revealed the predominance of 3 and 4 PAH rings in the collected samples. Low molecular weight LMW PAHs were dominant, with a percentage of 70% during spring and 67% during summer. Ant/ (Ant + Phe) ratio results showed that the source of PAHs in sediment is related to petroleum sources during spring and summer. While, BaA/BaA/ (BaA + Chry) ratio shows the sources of burning coal, grass, and wood. For the majority of stations, InP/ (InP + BgP) and Flu/ (Flu + Pyr) ratios indicated fuel combustion for most stations. The ratio of High molecular weight HMW to LMW suggested a petrogenic input. The results indicated a diversity of pollution sources of PAH, and according to toxicity and ecological risk assessment the recorded concentrations of PAHs in the sediment samples do not represent any potential environmental harm. The results of the present study can pave the way for managing, reducing pollution levels, and preventing environmental deterioration in Lake Edku.
- Open Access
- 13 November 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-14
Pre-treatment of composite industrial wastewater by Fenton and electro-Fenton oxidation processes
The present study aims to characterize three industrial wastewater samples collected from petrochemical, food and beet sugar industries to determine the pollution potential and select the appropriate pre-treatment approach. According to the biodegradability profile of the multi-sourced mixed (composite) sample, the advanced oxidation process (AOPs) namely, Fenton (F) and Electro-Fenton (EF) were adopted as pre-treatment techniques and the operating parameters such as time, type of electrodes, pH, voltage, iron and H2O2 concentrations were critically examined. Analysis of Variance (ANOVA) was conducted to compare the performance efficiency of F& EF AOPs for treating the composite samples and the total operating costs for both approaches were assessed. The results revealed that, the initial values of the composite sample were 7.11, 19.2, 32.6, 19.3, 937, 1512, 860, 3.9, 2110 and 2.34 for pH, Total Dissolved Solids (TDS), Electrical Conductivity (EC), Salinity, BOD, COD, Oil and grease (O&G), Total Phosphorous (TP), Total Suspended Solids (TSS) and Total Kjeldahl Nitrogen (TKN), respectively. In addition, EF process achieved more removal efficiency for COD, O&G, BOD, TSS, and TKN (84.3%, 69%, 85%, 72% and 71.27%) compared to Fenton which displayed 78.43%, 66%, 69%, 70.1%, and 61%, respectively. Moreover, there are statistically significant differences (p < 0.05) between the initial and final (pretreated) values of the composite industrial wastewater for the addressed parameters and EF was significantly (p < 0.05) more effective than F process. The total operating costs were 3.117 and 2.063$ for F and EF, respectively, which confirmed that EF is more efficient and cost effective than F process. It was concluded that electro-Fenton process is favorable, eco-friendly and cost-effective option for pretreating real complicated multi-sourced industrial wastewater. The present study demonstrated a new avenue for achieving efficient management of industrial wastewater generated from similar industries.
- 13 November 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-14
Open AccessPre-treatment of composite industrial wastewater by Fenton and electro-Fenton oxidation processes
The present study aims to characterize three industrial wastewater samples collected from petrochemical, food and beet sugar industries to determine the pollution potential and select the appropriate pre-treatment approach. According to the biodegradability profile of the multi-sourced mixed (composite) sample, the advanced oxidation process (AOPs) namely, Fenton (F) and Electro-Fenton (EF) were adopted as pre-treatment techniques and the operating parameters such as time, type of electrodes, pH, voltage, iron and H2O2 concentrations were critically examined. Analysis of Variance (ANOVA) was conducted to compare the performance efficiency of F& EF AOPs for treating the composite samples and the total operating costs for both approaches were assessed. The results revealed that, the initial values of the composite sample were 7.11, 19.2, 32.6, 19.3, 937, 1512, 860, 3.9, 2110 and 2.34 for pH, Total Dissolved Solids (TDS), Electrical Conductivity (EC), Salinity, BOD, COD, Oil and grease (O&G), Total Phosphorous (TP), Total Suspended Solids (TSS) and Total Kjeldahl Nitrogen (TKN), respectively. In addition, EF process achieved more removal efficiency for COD, O&G, BOD, TSS, and TKN (84.3%, 69%, 85%, 72% and 71.27%) compared to Fenton which displayed 78.43%, 66%, 69%, 70.1%, and 61%, respectively. Moreover, there are statistically significant differences (p < 0.05) between the initial and final (pretreated) values of the composite industrial wastewater for the addressed parameters and EF was significantly (p < 0.05) more effective than F process. The total operating costs were 3.117 and 2.063$ for F and EF, respectively, which confirmed that EF is more efficient and cost effective than F process. It was concluded that electro-Fenton process is favorable, eco-friendly and cost-effective option for pretreating real complicated multi-sourced industrial wastewater. The present study demonstrated a new avenue for achieving efficient management of industrial wastewater generated from similar industries.
- 16 February 2023
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 31 (7) , 2912-2929
Hybrid Beads of Poly(Acrylonitrile-co-Styrene/Pyrrole)@Poly Vinyl Pyrrolidone for Removing Carcinogenic Methylene Blue Dye Water Pollutant
- 16 February 2023
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 31 (7) , 2912-2929
Hybrid Beads of Poly(Acrylonitrile-co-Styrene/Pyrrole)@Poly Vinyl Pyrrolidone for Removing Carcinogenic Methylene Blue Dye Water Pollutant
- Open Access
- 13 February 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-13
Wheat husk-based sorbent as an economical solution for removal of oil spills from sea water
Oil spills are a significant threat to the marine ecosystem that requires immediate removal from the oceanic environment. Many technologies have been employed to clean up oil spills. Of these, adsorption has scored a prominent success due to the high efficiency, economic viability, environmental friendship, and ease of application. The utilization of agricultural waste to produce biosorbents have been considered as an ecofriendly and efficient approach for removing oil. Thus, a new low-cost oil adsorbent was prepared via esterification of the wheat straw (Str) with a hydrophobic benzoyl group, the resulting copolymer (Str-co-Benz) was characterized by FTIR, TGA, DSC, and SEM and used at laboratory scale. The oil spill cleanup process was conducted using a crude oil-natural seawater system under different adsorption conditions such as oil concentration, adsorbent dose, agitation time and speed. Equilibrium studies were performed to determine the capacity of the prepared materials for crude oil adsorption. Langmuir and Freundlich adsorption models were used to describe the experimental isotherms. The reliability of the data was examined and evaluated via application of response surface methodology program. The results showed that oil adsorption followed a pseudo-second-order kinetic model and fitted well with Langmuir model with a maximum adsorption capacity of 10.989 and 12.786 g/g for Str and (Str-co-Benz), respectively. Overall, the modified wheat husk is an effective platform for removing oil from marine ecosystems due to low cost, biodegradability, simple synthesis and fast removal. Moreover, the resulted solid can be used as a fuel in some industrial processes such as steam boilers and brick production incinerators.
- 13 February 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-13
Open AccessWheat husk-based sorbent as an economical solution for removal of oil spills from sea water
Oil spills are a significant threat to the marine ecosystem that requires immediate removal from the oceanic environment. Many technologies have been employed to clean up oil spills. Of these, adsorption has scored a prominent success due to the high efficiency, economic viability, environmental friendship, and ease of application. The utilization of agricultural waste to produce biosorbents have been considered as an ecofriendly and efficient approach for removing oil. Thus, a new low-cost oil adsorbent was prepared via esterification of the wheat straw (Str) with a hydrophobic benzoyl group, the resulting copolymer (Str-co-Benz) was characterized by FTIR, TGA, DSC, and SEM and used at laboratory scale. The oil spill cleanup process was conducted using a crude oil-natural seawater system under different adsorption conditions such as oil concentration, adsorbent dose, agitation time and speed. Equilibrium studies were performed to determine the capacity of the prepared materials for crude oil adsorption. Langmuir and Freundlich adsorption models were used to describe the experimental isotherms. The reliability of the data was examined and evaluated via application of response surface methodology program. The results showed that oil adsorption followed a pseudo-second-order kinetic model and fitted well with Langmuir model with a maximum adsorption capacity of 10.989 and 12.786 g/g for Str and (Str-co-Benz), respectively. Overall, the modified wheat husk is an effective platform for removing oil from marine ecosystems due to low cost, biodegradability, simple synthesis and fast removal. Moreover, the resulted solid can be used as a fuel in some industrial processes such as steam boilers and brick production incinerators.
- Open Access
- 25 April 2022
- Published by Elsevier in Journal of Environmental Management
- Vol. 315, 115128
Novel fabricated low-cost hybrid polyacrylonitrile/polyvinylpyrrolidone coated polyurethane foam (PAN/PVP@PUF) membrane for the decolorization of cationic and anionic dyes
- 25 April 2022
- Published by Elsevier in Journal of Environmental Management
- Vol. 315, 115128
Open AccessNovel fabricated low-cost hybrid polyacrylonitrile/polyvinylpyrrolidone coated polyurethane foam (PAN/PVP@PUF) membrane for the decolorization of cationic and anionic dyes
- 1 August 2019
- Published by Elsevier in Bioresource Technology
- Vol. 286, 121413
Biogas upgrading and biochemical production from gas fermentation: Impact of microbial community and gas composition
- 1 August 2019
- Published by Elsevier in Bioresource Technology
- Vol. 286, 121413
Biogas upgrading and biochemical production from gas fermentation: Impact of microbial community and gas composition
- 1 October 2018
- Published by Elsevier in Water Research
- Vol. 142, 86-95
Simultaneous biogas upgrading and biochemicals production using anaerobic bacterial mixed cultures
- 1 October 2018
- Published by Elsevier in Water Research
- Vol. 142, 86-95
Simultaneous biogas upgrading and biochemicals production using anaerobic bacterial mixed cultures
- 1 October 2017
- Published by Elsevier in Biomass and Bioenergy
- Vol. 105, 32-40
High efficient ethanol and VFA production from gas fermentation: Effect of acetate, gas and inoculum microbial composition
- 1 October 2017
- Published by Elsevier in Biomass and Bioenergy
- Vol. 105, 32-40
High efficient ethanol and VFA production from gas fermentation: Effect of acetate, gas and inoculum microbial composition
- 30 November 2012
- Published by IOP Publishing in Physica Scripta
- Vol. 86 (6)
Gamma-ray sensor based on an iron chloride tetraphenyl porphyrin/p-silicon heterojunction diode
- 30 November 2012
- Published by IOP Publishing in Physica Scripta
- Vol. 86 (6)
Gamma-ray sensor based on an iron chloride tetraphenyl porphyrin/p-silicon heterojunction diode