Ramazan Orhan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ramazan Orhan has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Buket Erzen
Department of Chemical Engineering, Faculty of Engineering, Fırat University, 23200 Elazığ, Türkiye
8 shared publications - Ercan Aydoğmuş
Department of Chemical Engineering, Faculty of Engineering Fırat University Elazığ Turkiye
8 shared publications - Mukaddes Karataş
Department of Chemical Engineering, Faculty of Engineering, Fırat University, 23200 Elazığ, Türkiye
7 shared publications - Gülbeyi Dursun
Department of Chemical Engineering, Faculty of Engineering, Fırat University, 23119 Elazığ, Türkiye
2 shared publications İbrahim Polat
2 shared publications- Mehmet Erdem
HACETTEPE UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF ENVIRONMENTAL ENGINEERING
2 shared publications
Latest Publications
- 15 July 2026
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 9 (4) , 1934-1944
Production and Characterization of Polyvinyl Alcohol-Chitosan-Carrageenan Biocomposite Films Containing St. John's Wort (Hypericum perforatum) Oil
This study aims to develop chitosan/poly(vinyl alcohol)/carrageenan biocomposite films incorporating Hypericum perforatum (St. John’s wort) oil (0.1–5%, w/w) and to evaluate the influence of oil incorporation on their structural, mechanical, and dielectric properties. FTIR analysis confirmed strong hydrogen bonding among polymer components and successful oil incorporation without new chemical bond formation. SEM results indicated increased surface heterogeneity and phase separation at higher oil contents. Increasing oil concentration reduced tensile strength (47.1–29.7 MPa), Shore A hardness, density, and dielectric constant (from 4.67 to 3.96), while significantly enhancing tensile strain (30.8–65.7%), demonstrating a plasticizing effect. Overall, it demonstrated that St. John's wort oil can be used as a natural plasticizer in bio-based polymer film applications.
- 15 July 2026
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 9 (4) , 1934-1944
Production and Characterization of Polyvinyl Alcohol-Chitosan-Carrageenan Biocomposite Films Containing St. John's Wort (Hypericum perforatum) Oil
This study aims to develop chitosan/poly(vinyl alcohol)/carrageenan biocomposite films incorporating Hypericum perforatum (St. John’s wort) oil (0.1–5%, w/w) and to evaluate the influence of oil incorporation on their structural, mechanical, and dielectric properties. FTIR analysis confirmed strong hydrogen bonding among polymer components and successful oil incorporation without new chemical bond formation. SEM results indicated increased surface heterogeneity and phase separation at higher oil contents. Increasing oil concentration reduced tensile strength (47.1–29.7 MPa), Shore A hardness, density, and dielectric constant (from 4.67 to 3.96), while significantly enhancing tensile strain (30.8–65.7%), demonstrating a plasticizing effect. Overall, it demonstrated that St. John's wort oil can be used as a natural plasticizer in bio-based polymer film applications.
- 30 May 2026
- Published by The Turkish Chemical Society in Journal of the Turkish Chemical Society Section B: Chemical Engineering
- Vol. 2026 (2) , 1-13
Mechanical, Thermal, and Morphological Characterization of Polyethylene Glycol–Modified Epoxy Composites
Polyethylene glycol (PEG) has emerged as a promising modifier for enhancing the toughness and thermomechanical performance of epoxy-based materials. However, the combined influence of PEG incorporation on the mechanical, thermal, and morphological behavior of epoxy composites has not yet been comprehensively clarified. In this study, epoxy composites reinforced with different PEG contents (3–18 wt.%) were successfully fabricated and systematically characterized to reveal the role of PEG in tailoring the multifunctional performance of epoxy systems. The composites were evaluated through bulk density, Shore D hardness, tensile testing, and thermal conductivity measurements, while Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analyses were conducted to investigate structural interactions and fracture morphology. The results demonstrated that PEG incorporation significantly altered the physical and mechanical behavior of the epoxy matrix. Increasing PEG content reduced the Shore D hardness from 77.5 for neat epoxy to 65.7 at 18 wt.% PEG, indicating enhanced flexibility within the crosslinked network. In contrast, thermal conductivity increased markedly from 0.112 to 0.148 W·m⁻¹·K⁻¹ with increasing PEG concentration, demonstrating the beneficial role of PEG in promoting heat transfer through the polymer matrix. Tensile analysis revealed that the composite containing 10 wt.% PEG exhibited the most balanced mechanical performance, achieving an ultimate tensile strength of approximately 60–61 MPa together with a significantly increased strain at failure of 3.5–3.7%, indicating improved ductility and toughness without substantial strength loss. FTIR results confirmed that PEG modified the epoxy matrix primarily through physical interactions rather than chemical bonding, while SEM observations revealed enhanced plastic deformation and energy absorption mechanisms. These findings provide new insight into the multifunctional role of PEG as a flexible performance modifier and demonstrate its potential for designing epoxy composites with simultaneously improved toughness and thermal transport properties for advanced engineering applications.
- 30 May 2026
- Published by The Turkish Chemical Society in Journal of the Turkish Chemical Society Section B: Chemical Engineering
- Vol. 2026 (2) , 1-13
Mechanical, Thermal, and Morphological Characterization of Polyethylene Glycol–Modified Epoxy Composites
Polyethylene glycol (PEG) has emerged as a promising modifier for enhancing the toughness and thermomechanical performance of epoxy-based materials. However, the combined influence of PEG incorporation on the mechanical, thermal, and morphological behavior of epoxy composites has not yet been comprehensively clarified. In this study, epoxy composites reinforced with different PEG contents (3–18 wt.%) were successfully fabricated and systematically characterized to reveal the role of PEG in tailoring the multifunctional performance of epoxy systems. The composites were evaluated through bulk density, Shore D hardness, tensile testing, and thermal conductivity measurements, while Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analyses were conducted to investigate structural interactions and fracture morphology. The results demonstrated that PEG incorporation significantly altered the physical and mechanical behavior of the epoxy matrix. Increasing PEG content reduced the Shore D hardness from 77.5 for neat epoxy to 65.7 at 18 wt.% PEG, indicating enhanced flexibility within the crosslinked network. In contrast, thermal conductivity increased markedly from 0.112 to 0.148 W·m⁻¹·K⁻¹ with increasing PEG concentration, demonstrating the beneficial role of PEG in promoting heat transfer through the polymer matrix. Tensile analysis revealed that the composite containing 10 wt.% PEG exhibited the most balanced mechanical performance, achieving an ultimate tensile strength of approximately 60–61 MPa together with a significantly increased strain at failure of 3.5–3.7%, indicating improved ductility and toughness without substantial strength loss. FTIR results confirmed that PEG modified the epoxy matrix primarily through physical interactions rather than chemical bonding, while SEM observations revealed enhanced plastic deformation and energy absorption mechanisms. These findings provide new insight into the multifunctional role of PEG as a flexible performance modifier and demonstrate its potential for designing epoxy composites with simultaneously improved toughness and thermal transport properties for advanced engineering applications.
- Open Access
Optimizing PVA/Chitosan Films with Acid-Functionalized MWCNTs: A Multifaceted Study on Performance Enhancement
Poly(vinyl alcohol)/chitosan (PVA/CS) biodegradable films reinforced with acid-functionalized multi-walled carbon nanotubes (f-MWCNTs) were fabricated via solution casting to investigate the effects of nanotube incorporation on structural, mechanical, thermal, dielectric, and physicochemical properties. Unlike conventional CNT-reinforced systems, this study focuses on the role of acid functionalization in improving nanotube dispersion and interfacial interactions, enabling simultaneous enhancement of multiple performance characteristics. Fourier transform infrared spectroscopy (FTIR) analysis confirmed strong intermolecular interactions between PVA/CS functional groups and carboxyl groups on f-MWCNTs, while scanning electron microscopy (SEM) revealed homogeneous nanotube dispersion at low loadings and partial aggregation at higher contents. X-ray diffraction (XRD) indicated that crystallinity was modified in a non-monotonic manner with increasing nanotube concentration due to competing nucleation and chain-restriction effects, while dielectric measurements showed an increase in dielectric constant from 3.78 to 4.27 as a result of enhanced interfacial polarization. The thermal conductivity improved from 0.195 to 0.247 W·m−1·K−1, and tensile strength increased from 19.8 to 24.5 MPa at 0.2 wt.% f-MWCNT, with elongation at break decreasing from 37.9% to 25.1%, reflecting increased stiffness. The degree of swelling and water solubility decreased with higher nanotube content, indicating reduced hydrophilicity and enhanced structural compactness. The results provide new insights into how surface-functionalized nanofillers can be used to tailor the multifunctional performance of biodegradable polymer nanocomposite films, highlighting their potential in advanced applications such as sustainable packaging, flexible electronics, sensors, and membrane technologies.
Open AccessOptimizing PVA/Chitosan Films with Acid-Functionalized MWCNTs: A Multifaceted Study on Performance Enhancement
Poly(vinyl alcohol)/chitosan (PVA/CS) biodegradable films reinforced with acid-functionalized multi-walled carbon nanotubes (f-MWCNTs) were fabricated via solution casting to investigate the effects of nanotube incorporation on structural, mechanical, thermal, dielectric, and physicochemical properties. Unlike conventional CNT-reinforced systems, this study focuses on the role of acid functionalization in improving nanotube dispersion and interfacial interactions, enabling simultaneous enhancement of multiple performance characteristics. Fourier transform infrared spectroscopy (FTIR) analysis confirmed strong intermolecular interactions between PVA/CS functional groups and carboxyl groups on f-MWCNTs, while scanning electron microscopy (SEM) revealed homogeneous nanotube dispersion at low loadings and partial aggregation at higher contents. X-ray diffraction (XRD) indicated that crystallinity was modified in a non-monotonic manner with increasing nanotube concentration due to competing nucleation and chain-restriction effects, while dielectric measurements showed an increase in dielectric constant from 3.78 to 4.27 as a result of enhanced interfacial polarization. The thermal conductivity improved from 0.195 to 0.247 W·m−1·K−1, and tensile strength increased from 19.8 to 24.5 MPa at 0.2 wt.% f-MWCNT, with elongation at break decreasing from 37.9% to 25.1%, reflecting increased stiffness. The degree of swelling and water solubility decreased with higher nanotube content, indicating reduced hydrophilicity and enhanced structural compactness. The results provide new insights into how surface-functionalized nanofillers can be used to tailor the multifunctional performance of biodegradable polymer nanocomposite films, highlighting their potential in advanced applications such as sustainable packaging, flexible electronics, sensors, and membrane technologies.
- 31 December 2025
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 40 (4) , 2425-2436
Melissa officinalis yaprakları kullanılarak kükürt nanopartiküllerinin yeşil sentezi ve üzüm bağlarında külleme (Erysiphe necator schw.) üzerindeki etkisi
Tüm dünyada ve ülkemiz bağcılığında önemli ölçüde ürün ve kalite kayıplarına yol açan fungal hastalıklardan birisi de Erysiphe necator Schw. tarafından oluşturulan küllemedir. Hastalık, sıcak ve kuru hava koşullarında salkım kalitesini ve verimini olumsuz yönde etkilemektedir. Bu hastalığın mücadelesinde genellikle toz kükürt kullanılmakta ancak çoğu zaman kükürtün kullanımından dolayı bitkide fitotoksisite oluşmaktadır. Günümüzde nanopartiküller farklı fizikokimyasal özelliklerinden dolayı oldukça ilgi çekmektedir. Nanoparçacıklar küçük boyutu, geniş yüzey alanı ve yüksek reaktiviteye sahip olmaları nedeniyle fungisit, bakterisit ve nanogübrelerde kullanılmaktadır. Nanomalzemelerin sürdürülebilir ve çevre dostu bir yöntemle üretilmesi önemlidir. Bu yöntemler arasında, basitliği, kullanımı, çevre dostu, mükemmel biyouyumluluğu ve düşük biyotoksisitesi nedeniyle yeşil sentez yöntemi en uygun yöntemdir. Mevcut çalışmada polifenol içeriği yüksek ve kolay temin edilen bir bitki olan melisa yaprağı (Melissa officinalis L.) kullanılarak nanokükürt sentezlenmiştir. Sentezlenen SNP’lerin etkin oluşumu UV-Görünür spektroskopisi, XRD, FTIR, FE-SEM, EDX, TEM, partikül boyut analizi ve zeta potansiyeli analizleri ile incelenmiştir. Ortalama parçacık boyutunun 21,4 ile 126,8 nm arasında olduğu belirlenmiştir. Sentezlenen nanokükürt üzüm bağındaki asmalara uygulanarak bağ küllemesi (Erysiphe necator Schw.) hastalığına karşı etkisi belirlendikten sonra toz kükürt ile karşılaştırılmıştır. Nanokükürt uygulamasının %79,21, toz kükürt uygulamasının ise bağ küllemesi hastalığını önlemede %68,28 etkili olduğu tespit edilmiştir.
- 31 December 2025
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 40 (4) , 2425-2436
Melissa officinalis yaprakları kullanılarak kükürt nanopartiküllerinin yeşil sentezi ve üzüm bağlarında külleme (Erysiphe necator schw.) üzerindeki etkisi
Tüm dünyada ve ülkemiz bağcılığında önemli ölçüde ürün ve kalite kayıplarına yol açan fungal hastalıklardan birisi de Erysiphe necator Schw. tarafından oluşturulan küllemedir. Hastalık, sıcak ve kuru hava koşullarında salkım kalitesini ve verimini olumsuz yönde etkilemektedir. Bu hastalığın mücadelesinde genellikle toz kükürt kullanılmakta ancak çoğu zaman kükürtün kullanımından dolayı bitkide fitotoksisite oluşmaktadır. Günümüzde nanopartiküller farklı fizikokimyasal özelliklerinden dolayı oldukça ilgi çekmektedir. Nanoparçacıklar küçük boyutu, geniş yüzey alanı ve yüksek reaktiviteye sahip olmaları nedeniyle fungisit, bakterisit ve nanogübrelerde kullanılmaktadır. Nanomalzemelerin sürdürülebilir ve çevre dostu bir yöntemle üretilmesi önemlidir. Bu yöntemler arasında, basitliği, kullanımı, çevre dostu, mükemmel biyouyumluluğu ve düşük biyotoksisitesi nedeniyle yeşil sentez yöntemi en uygun yöntemdir. Mevcut çalışmada polifenol içeriği yüksek ve kolay temin edilen bir bitki olan melisa yaprağı (Melissa officinalis L.) kullanılarak nanokükürt sentezlenmiştir. Sentezlenen SNP’lerin etkin oluşumu UV-Görünür spektroskopisi, XRD, FTIR, FE-SEM, EDX, TEM, partikül boyut analizi ve zeta potansiyeli analizleri ile incelenmiştir. Ortalama parçacık boyutunun 21,4 ile 126,8 nm arasında olduğu belirlenmiştir. Sentezlenen nanokükürt üzüm bağındaki asmalara uygulanarak bağ küllemesi (Erysiphe necator Schw.) hastalığına karşı etkisi belirlendikten sonra toz kükürt ile karşılaştırılmıştır. Nanokükürt uygulamasının %79,21, toz kükürt uygulamasının ise bağ küllemesi hastalığını önlemede %68,28 etkili olduğu tespit edilmiştir.
- 27 September 2025
- Published by Springer Nature in Cellulose
- Vol. 32 (16) , 9451-9472
Development of bio-based nanocomposites from modified corn husk cellulose and green-synthesized nanoparticles
- 27 September 2025
- Published by Springer Nature in Cellulose
- Vol. 32 (16) , 9451-9472
Development of bio-based nanocomposites from modified corn husk cellulose and green-synthesized nanoparticles
- Open Access
- 7 May 2025
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 67 (7) , 1230-1241
Green synthesis of CuO nanoparticles using Curcuma longa L. extract: composite dielectric and mechanical properties
Green synthesis, one of the methods of obtaining metallic nanoparticles using plants, is preferred because it is simpler, eco-friendly, and economical and has the ability to reduce metallic ions using phytochemicals in its structure. This study investigates the green synthesis of CuO nanoparticles using turmeric (Curcuma longa L.) extract, the structural, chemical, and morphological properties of the synthesized CuO nanoparticles, and the effects on the dielectric and mechanical properties of the nano-CuO-doped epoxy nanocomposites. The total phenolic content of turmeric extract was determined using the Folin-Ciocalteu method. The structural and morphological properties of the synthesized CuO nanoparticles were characterized by UV–Vis, FTIR, XRD, FE-SEM, EDX, and TEM. The charge distribution of the nanoparticles was determined using a Zetasizer. It was determined that the shape of the synthesized CuO nanoparticles was spherical and the average particle size was 62 nm. Nanofilms and nanocomposite materials were prepared by adding the synthesized CuO nanoparticles to epoxy resin, and their effects on the dielectric and mechanical properties were investigated. An increase in the ε′ and ε′′ values of the doped-nanocomposite films was observed compared with those of the pure epoxy film. It was determined that nanocomposites also improved the tensile strength and hardness values.
- 7 May 2025
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 67 (7) , 1230-1241
Open AccessGreen synthesis of CuO nanoparticles using Curcuma longa L. extract: composite dielectric and mechanical properties
Green synthesis, one of the methods of obtaining metallic nanoparticles using plants, is preferred because it is simpler, eco-friendly, and economical and has the ability to reduce metallic ions using phytochemicals in its structure. This study investigates the green synthesis of CuO nanoparticles using turmeric (Curcuma longa L.) extract, the structural, chemical, and morphological properties of the synthesized CuO nanoparticles, and the effects on the dielectric and mechanical properties of the nano-CuO-doped epoxy nanocomposites. The total phenolic content of turmeric extract was determined using the Folin-Ciocalteu method. The structural and morphological properties of the synthesized CuO nanoparticles were characterized by UV–Vis, FTIR, XRD, FE-SEM, EDX, and TEM. The charge distribution of the nanoparticles was determined using a Zetasizer. It was determined that the shape of the synthesized CuO nanoparticles was spherical and the average particle size was 62 nm. Nanofilms and nanocomposite materials were prepared by adding the synthesized CuO nanoparticles to epoxy resin, and their effects on the dielectric and mechanical properties were investigated. An increase in the ε′ and ε′′ values of the doped-nanocomposite films was observed compared with those of the pure epoxy film. It was determined that nanocomposites also improved the tensile strength and hardness values.
- 13 March 2025
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- Vol. 65 (6) , 849-875
Advancements and Challenges in Biomaterials: Innovations, Sustainability, and Future Prospects
- 13 March 2025
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- Vol. 65 (6) , 849-875
Advancements and Challenges in Biomaterials: Innovations, Sustainability, and Future Prospects
- 3 March 2025
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 64 (10) , 1538-1561
Innovative Insulation Materials: A Comprehensive Review of Current Trends, Challenges, and Future Directions in Sustainable Building Technologies
- 3 March 2025
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 64 (10) , 1538-1561
Innovative Insulation Materials: A Comprehensive Review of Current Trends, Challenges, and Future Directions in Sustainable Building Technologies
- Open Access
- 9 January 2024
- Published by Wiley in ChemistryOpen
- Vol. 13 (6) , e202300238
Analysis of Photocatalytic Degradation of Phenol by Zinc Oxide Using Response Surface Methodology
In this study, the photocatalytic degradation of phenol, which is commonly found in industrial wastewater at high rates, was investigated using a zinc oxide (ZnO) catalyst. It is thought that our findings will contribute to the removal of phenol in industrial wastewater. The experimental study was conducted in a batch‐type air‐fed cylindrical photocatalytic reactor, and a central composite design (CCD) was chosen and analyzed using response surface methodology (RSM). The study aimed to explore the effects of initial phenol concentration, catalyst concentration, airflow rate, and degradation time on the photocatalytic degradation of phenol and the removal efficiency of total organic carbon (TOC). A quadratic regression model was developed to establish the relationship between phenol degradation, TOC removal effectiveness, and the four factors mentioned. The validity of the model was assessed through an analysis of variance (ANOVA). A good agreement was observed between the model results and the experimental data. As a result of the experiments carried out under optimized conditions, the degradation percentage of phenol was found to be 77.15 %, and the degradation percentage of TOC was 59.87 %. Additionally, pseudo‐first‐order kinetics were used in the photocatalytic degradation of phenol.
- 9 January 2024
- Published by Wiley in ChemistryOpen
- Vol. 13 (6) , e202300238
Open AccessAnalysis of Photocatalytic Degradation of Phenol by Zinc Oxide Using Response Surface Methodology
In this study, the photocatalytic degradation of phenol, which is commonly found in industrial wastewater at high rates, was investigated using a zinc oxide (ZnO) catalyst. It is thought that our findings will contribute to the removal of phenol in industrial wastewater. The experimental study was conducted in a batch‐type air‐fed cylindrical photocatalytic reactor, and a central composite design (CCD) was chosen and analyzed using response surface methodology (RSM). The study aimed to explore the effects of initial phenol concentration, catalyst concentration, airflow rate, and degradation time on the photocatalytic degradation of phenol and the removal efficiency of total organic carbon (TOC). A quadratic regression model was developed to establish the relationship between phenol degradation, TOC removal effectiveness, and the four factors mentioned. The validity of the model was assessed through an analysis of variance (ANOVA). A good agreement was observed between the model results and the experimental data. As a result of the experiments carried out under optimized conditions, the degradation percentage of phenol was found to be 77.15 %, and the degradation percentage of TOC was 59.87 %. Additionally, pseudo‐first‐order kinetics were used in the photocatalytic degradation of phenol.