NMNikolas Makasis

Nikolas Makasis

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Nikolas Makasis has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Integrating microbial induced calcium carbonate precipitation (MICP) in geothermal pavements: A coupled thermo-economic numerical evaluation

    by Xiaoying Gu, Alexandra Clarà Saracho, Nikolas Makasis, Monika Johanna Kreitmair, Guillermo A. Narsilio

  • Open Access

    An efficient and sustainable approach for cooling underground substations: natural and engineered conditions for improved system performance

    by Nikolas Makasis, Asal Bidarmaghz

    The use of underground space for transport in urban environments has increased at an accelerated rate over recent years. As transport tunnels are built deeper into the already congested subsurface, cooling deep underground substations with machinery that serve the tunnel infrastructure has become a significant economic and environmental challenge. A new approach taking advantage of airflow in the tunnels and the thermal mass of the surrounding ground has been recently introduced, involving the use of water-filled high-density polyethylene (HDPE) pipes integrated into the tunnel space. This paper expands on this approach, undertaking extensive analyses using numerical modelling to identify the conditions under which these systems can operate most beneficially. Both natural and engineered conditions are included in the analyses, such as location, investigating four cases with different climates and geological conditions, tunnel airflow, representing the type and age of the tunnel infrastructure, and heat exchanger size, determined by the designer. Values between 2 kW and 21 kW per pipe loop are estimated, depending on the conditions, with the tunnel air temperature being most impactful and colder tunnels most favourable. The results demonstrate a complex interplay between the airflow velocity, heat exchanger length, and airflow temperature, and how gravitational forces causing mixing influence the heat transfer process in the tunnel. Groundwater flow is incorporated, showing potential thermal energy increases of up to 50% for flow perpendicular to the tunnel lining and 18% for parallel, with the highest impact in locations with high air/soil temperature and tunnels with slow airflow.

  • Open Access

    3D City-scale groundwater flow and heat transport modelling using an archetype approach

    by Mohammad Reza Hajizadeh Javaran, Monika Kreitmair, Nikolas Makasis, Philipp Blum, Kathrin Menberg

    Groundwater beneath urban areas is affected by a number of natural and anthropogenic factors, such as geological and hydrogeological characteristics, as well as dense anthropogenic infrastructure, such as surface land use, heated basements, underground car parks, and train tunnels. Understanding groundwater flow and heat transport processes in such complex urban areas is therefore essential not only for planning thermal and hydraulic subsurface uses, but also for ecological and sustainable management of urban aquifers. This also involves examining the key hydrogeological or anthropogenic characteristics that influence subsurface thermal conditions, thereby supporting decision-making for management purposes. Physics-based numerical models excel at simulating flow and heat transport at different scales, adopting various assumptions. However, a realistic 3D city-scale model in a complex geological setting requires an accurate and computationally efficient approach, as management purposes need iterative simulation of different usage scenarios.To this end, a 3D groundwater flow and heat transport model is developed for Berlin, for an area covering 118 km². It is based on a detailed 3D geological model created with Leapfrog Geo software using available geological data. To reduce computational time, the area is divided into smaller blocks, each representing the hydro-geological and anthropogenic characteristics of the heterogeneous urban area. Initially, all blocks are simulated at low resolution for different combinations of geological and anthropogenic characteristics to generate input-output relationships between these characteristics of each volume and the groundwater temperatures. Resulting input-output pairs are then used to cluster the modeled volumes into archetypes with similar hydrogeological behavior and thermal states by utilizing a decision tree approach. Finally, simulated archetypes are spatially re-combined to create a city-scale temperature map. Furthermore, to assess the key characteristics governing the thermal status of groundwater, contribution of each parameter to the decision tree is calculated.The results reveal that, among all, the area of heated basements contributes most to groundwater temperature distribution, especially for the blocks where there is no substantial groundwater flow and conductive heat transport processes dominate. However, for the blocks with sufficient flow, upstream temperature entering the blocks is the main characteristic. Moreover, our findings highlight a close link to surface land use. As an example, the average temperature in Tiergarten location, which is a green area with a less anthropogenic influence is found to be around 11.8 °C to 12.0°C, on shallowest depth of blocks i.e. 0-50 m below ground, while in densely built-up areas, such as Alexanderplatz, the temperature could raise to 14.8°C. Furthermore, using the resulting temperature map, enables us to identify local hotspots or low-spots, which is not possible to observe in alternatives such as interpolated maps created from a dense number of measurements. This study presents a computationally efficient city-scale modeling approach, which in future could be utilized as a tool for performing iterative simulations for different subsurface use scenarios such as geothermal use, drinking water use, or protecting ecological habitats. Also, it provides a tool for investigating long-term climate change effects on groundwater quality and for assessing groundwater quantity and quality at city-scale.

  • Open Access

    Exploring the use of mining shafts with geothermal systems using numerical modelling

    by Nikolas Makasis

    As the world transitions to greener sources of energy, understanding how to best plan this transition becomes a critical challenge. A relatively recent approach contributing to the decarbonisation of heating and cooling infrastructure is repurposing abandoned mine networks to deploy geothermal energy technologies. These technologies utilise the subsurface to sustainably provide heating and cooling to buildings and are one of the key renewable technologies contributing to and shaping the decarbonisation of our energy landscape. Different configurations for exchanging heat with the ground can be used, such as closed- or open-loop systems, as well as operational strategies, such as utilising thermal storage, which can affect the subsurface requirements and design of the system.With mining operations being increasingly shut down, geothermal mine systems not only constitute a sustainable method to providing heating and cooling energy, but also repurpose these abandoned sites and subsurface networks. Additionally, while geothermal energy technologies are generally highly efficient, important barriers to their wider implementation include relatively high capital costs due to subsurface-related uncertainties and the need for earthworks, as well as the dependency on groundwater flow conditions for certain applications. Integration with mines can contribute to overcoming these barriers, such as by minimising required earthworks, by reducing uncertainty through access to high quality data on the state of the subsurface, and by offering advantageous subsurface conditions for a geothermal system that takes advantage of the flow of water through the tunnels.Integrating geothermal technologies within abandoned mine infrastructure to provide heating and cooling to buildings has been demonstrated and proven in several European countries in recent years. Large-scale projects, such as the Gateshead heat network in the UK (6MW heat pump) and the district heating system in Heerlen, Netherlands, showcase the potential of using flooded subsurface tunnel networks to provide geothermal energy at a large-scale. However, one potential smaller-scale application that has received little attention, and is the focus of this work, is utilising mining shafts.Abandoned mining shafts are typically covered and flooded, making them a potential low hanging fruit for incorporating geothermal energy applications. While this concept is discussed in literature, more information is needed on the applicability and suitability of different geothermal configurations under different mine shaft conditions. This work contributes towards bridging this gap by utilising advanced finite element modelling methods to simulate a typical mine shaft, adopting a case study from the UK, and investigating in detail the potential energy yields of different geothermal applications under different conditions. Importantly, the effect of natural convection, expected to be significant in a flooded shaft compared to saturated soil, is carefully considered, acknowledging the complexities this introduces due to the difficulty of computational flow modelling at this scale.

  • Open Access

    Impact of input uncertainty within large-scale shallow geothermal assessment

    by Monika Kreitmair, Nikolas Mak, Adrian Torrico Siacara, Ruchi Choudhary

    The presence of underground infrastructure has been shown to affect subsurface temperatures beneath dense urban areas, in a phenomenon known as the subsurface urban heat island (SUHI). The increase in temperature can impact the subsurface in several ways, including groundwater quality and ecosystems, goods production and storage, and infrastructure maintenance. Importantly, and most relevant to this work, this phenomenon can have considerable impact on the shallow geothermal potential of the ground under cities, and accounting for this is an important aspect of estimating and planning the comprehensive provision of heating and cooling using the ground. A barrier to the accurate assessment of city-scale shallow geothermal potential is scarcity of data on ground conditions, within both the natural and the built environment. The cost to acquire these subsurface data is prohibitively high, and uncertainties in the parameter values to use in numerical modelling remain, giving rise to propagated uncertainty in the results calculated for the potential, which is seldom accounted for. Quantifying the uncertainty in the determined geothermal potential given uncertain input parameters is an important step towards establishing meaningful potential estimates as well as understanding which parameters require more and/or more precise data measurements. In a step towards this, this work builds on a previously published methodology for large-scale thermal and geothermal potential mapping, based on the identification of ground thermal archetypes. The methodology is expanded through the propagation of sources of input uncertainty, such as ground thermal parameters and temperature of subsurface infrastructure, to determine the variability in the ground temperature and, by extension, the large-scale geothermal potential within two boroughs of London, United Kingdom. Critical parameters are identified via an archetype-level sensitivity analysis and surrogate models are generated for each of the archetypes identified within the modelled domain. Uncertainty in the input parameters is propagated through to the volume-averaged temperature, using Monte Carlo simulations. The results show the effect of uncertainty from individual inputs as well as combined effects from multiple sources of uncertainty, contributing to an improved understanding of the reliability of shallow geothermal for space heating and cooling.

  • Open Access

    A case study on the use of AI methods towards bridging the gap between design and operation of ground-source heat pump systems.

    by Nikolas Makasis, Monika Kreitmair, Chaoqun Zhuang, Kathrin Menberg, Wonjun Choi, Ruchi Choudhary

    Shallow geothermal energy technologies have seen significant development over past decades and the number of ground-source heat pump (GSHP) installations has seen an increasing trend worldwide. Importantly, a plethora of scientific research has explored performance, mechanical stability, optimisation, and innovative approaches to utilise the ground as a source or sink of thermal energy. Despite this, however, there is often a gap between the designed performance of a system and the realised in-situ operation. Such a gap can result from a lack of information, such as imprecise ground profile/thermal properties, changes in the environment and conditions, such as in building usage due to changes in behavioural patterns, as well as the fact that GSHP design is typically undertaken in isolation of other system elements, e.g., by using only estimates of the heating and cooling demands.Real-time monitoring and appropriate smart control methods can help bridge this discrepancy, alleviating potential issues. Heat pumps and building management systems typically record useful data, such as the temperature of the fluid in the ground loop, constituting valuable sources of information on the current system performance at a given moment. However, using these data to predict how the system will perform in the future, and thus inform system operation, is not trivial. A field that can help tackle this problem is data science, which uses data-driven artificial intelligence (AI) approaches to provide useful insights from data and has had tremendous advancements in recent years. It is therefore expected that statistical AI approaches can be used with data from GSHP systems meaningfully, to inform the efficient operation of the system.This research focuses on a case study in Cambridge, UK, where a GSHP system, with capacity of 320 kW and a ground loop with 24 160-m deep boreholes, provides heating and cooling for a recently constructed university building. The data recorded from this system is utilised together with a combination of AI methods, such as gradient boosting and deep neural network predictive models, and finite element modelling to assess how well the ground loop performance can be predicted in real time and the implications this can have on the performance of the system. Thus, this work demonstrates how GSHP data can be leveraged to make useful decisions based on updated information and thereby ensure that a GSHP system performs efficiently throughout its lifetime.

  • Open Access

    Demonstration of a city-scale geothermal resource assessment using a statistical archetypes-based approach

    by Monika Kreitmair, Nikolas Makasis, Kecheng Chen, Ruchi Choudhary, Kenichi Soga

    Growing demand for space in urban areas is accelerating the utilisation of the shallow subsurface for residential and commercial spaces, transport systems, industrial processes, and energy applications. The associated underground infrastructure can act as a source and sink of heat within the subsurface, altering the ambient temperature of the soil. The extent and magnitude of such a temperature anomaly is affected by the type and density of the structures in the ground, the environmental hydraulic conditions governing groundwater flow, and the geological properties impacting conductive heat transfer. As a result, temperature distributions will vary spatially beneath a given city, thereby also affecting the geothermal potential available for heating and cooling. Knowledge on where the greatest geothermal potential lies within a city can be crucial for large-scale planning of geothermal systems, and incorporating these within building and district-level systems.We present a methodology to map the geothermal potential under cities, extending on a recently developed and published large-scale subsurface temperature modelling methodology, which statistically identifies commonalities in how natural and anthropogenic features affect subsurface heat transfer and creates subsurface archetypes. The extension entails incorporating ground heat exchanging structures, e.g. boreholes, within the archetypes to further subdivide existing thermal archetypes into geothermal archetypes and thus enable comparison of the relative performance of a ground heat exchanger in different areas of a city. The methodology is applied to the city of Cambridge, UK to generate a map of geothermal potential. Additionally, the demand for the city, computed using field data, is mapped to produce a demand-to-capacity map of the city. By exploring different exploitation scenarios of the geothermal potential, i.e. first-come-first-served vs. co-ordinated, we further determine the ability of the resulting deployment patterns to meet likely changes in future demand under the effects of climate change.

  • Open Access

    Rationalising data collection for supporting decision making in building energy systems using value of information analysis

    by Max Langtry, Chaoqun Zhuang, Rebecca Ward, Nikolas Makasis, Monika J. Kreitmair, Zack Xuereb Conti, Domenic Di Francesco, Ruchi Choudhary


  • Open Access

    Performance analysis of hydrogen production systems using hot sedimentary aquifer geothermal resources

    by Maryam Hamlehdar, Guillermo A. Narsilio, Nikolas Makasis, Graeme Beardsmore, Andrew J. Feitz