Igor N. Leontyev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Igor N. Leontyev has a total of 123 co-authors. Here are the top co-authors by number of shared publications:
- Nina Vladimirovna Smirnova
Technological Department, Platov South Russian State Polytechnic University (NPI), 346428 Novocherkassk, Russia
24 shared publications - Aleksandra B. Kuriganova
Technological Department, Platov South Russian State Polytechnic University (NPI), 346428 Novocherkassk, Russia
19 shared publications - Aydar Rakhmatullin
Conditions Extrêmes et Matériaux: Haute Température et Irradiation, CEMHTI, UPR 3079-CNRS Univ. Orléans, 45071 Orléans, France
8 shared publications - Brahim Dkhil
Université Paris-Saclay, CentraleSupélec, CNRS, Laboratoire SPMS, 91190 Gif-sur-Yvette, France
6 shared publications Olga A. Maslova
6 shared publications- Mathieu Allix
CNRS CEMHTI UPR3079 Univ. Orléans Orléans France
5 shared publications
Latest Publications
- 24 September 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (36) , 19775-19782
Advanced X-ray diffraction for structure–property analysis of photocatalytic TiO 2 nanoparticles
X-ray diffraction analysis as a tool for identifying structural factors affecting the photocatalytic activity of TiO 2.
- 24 September 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (36) , 19775-19782
Advanced X-ray diffraction for structure–property analysis of photocatalytic TiO 2 nanoparticles
X-ray diffraction analysis as a tool for identifying structural factors affecting the photocatalytic activity of TiO 2.
- Open Access
- 30 August 2026
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 21 (4) , 923-931
Photoelectrocatalysis on TiO2 Derived from Titanium Acetylacetonate: Effect of Decomposition Temperature
Photoelectrocatalytic (PEC) water splitting utilizing titanium dioxide (TiO2) photoanodes presents a promising avenue for sustainable hydrogen production. Understanding the correlation linking the synthesis conditions to structural and phase evolution of semiconductor materials, which is essential for the development of photoanodes with improved PEC activity, remains challenging. This study aims to elucidate the structure- and phase-dependent PEC activity of TiO2 nanoparticles (NPs) obtained via the non-isothermal decomposition of titanium oxyacetylacetonate (TiO(acac)₂) precursor at varying final temperatures (Tfin). The microstructural parameters and phase composition of the TiO2 NPs were determined via Rietveld refinement of X-ray diffraction (XRD) data. The PEC activity of spin-coated TiO2/FTO photoanodes was evaluated via open-circuit potential (OCP) measurements, OCP decay, and linear sweep voltammetry (LSV) under chopped illumination. The results indicate that the anatase-rutile ratio and crystallite dimensions can be modulated by varying Tfin in the range of 500-700 °C. An optimized mixed-phase TiO2 comprising 71.7% anatase and 28.3% rutile, with the crystallite sizes Dav of 29.6 nm and 55.6 nm, respectively, is achieved at 650 °C enabling an efficient transition to free-electron transport and maximized photoactivity. These findings offer essential design principles for managing structural and phase transformations in TiO2-based photoanodes via the metal-organic decomposition route. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- 30 August 2026
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 21 (4) , 923-931
Open AccessPhotoelectrocatalysis on TiO2 Derived from Titanium Acetylacetonate: Effect of Decomposition Temperature
Photoelectrocatalytic (PEC) water splitting utilizing titanium dioxide (TiO2) photoanodes presents a promising avenue for sustainable hydrogen production. Understanding the correlation linking the synthesis conditions to structural and phase evolution of semiconductor materials, which is essential for the development of photoanodes with improved PEC activity, remains challenging. This study aims to elucidate the structure- and phase-dependent PEC activity of TiO2 nanoparticles (NPs) obtained via the non-isothermal decomposition of titanium oxyacetylacetonate (TiO(acac)₂) precursor at varying final temperatures (Tfin). The microstructural parameters and phase composition of the TiO2 NPs were determined via Rietveld refinement of X-ray diffraction (XRD) data. The PEC activity of spin-coated TiO2/FTO photoanodes was evaluated via open-circuit potential (OCP) measurements, OCP decay, and linear sweep voltammetry (LSV) under chopped illumination. The results indicate that the anatase-rutile ratio and crystallite dimensions can be modulated by varying Tfin in the range of 500-700 °C. An optimized mixed-phase TiO2 comprising 71.7% anatase and 28.3% rutile, with the crystallite sizes Dav of 29.6 nm and 55.6 nm, respectively, is achieved at 650 °C enabling an efficient transition to free-electron transport and maximized photoactivity. These findings offer essential design principles for managing structural and phase transformations in TiO2-based photoanodes via the metal-organic decomposition route. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- Open Access
- 22 April 2026
- Published by Elsevier in SSRN Electronic Journal
Temperature dynamic in electrochemical system under pulse electrolysis mode
The electrochemical system of a silver-aqueous-based electrolyte was examined for temperature dynamics during pulse electrolysis. The temperature of a silver-aqueous-based electrolyte electrochemical system was observed under pulsed electrolysis conditions utilizing resistance temperature detectors. The temperature effects observed in the quasi-stationary layer of this electrochemical system are influenced by the electrochemical behavior of silver, which varies according to the anionic composition of the aqueous electrolyte (OH-, CO32-, F-, SO42-, Cl-) and the rate-limiting transfer of reactants within the electrochemical system. The results obtained provide a basis for developing a methodology to study the electrochemistry of metals under pulsed electrolysis conditions, considering the temperature effects that arise. They also enhance the refinement of theoretical models of electrochemical processes, which account for non-stationary electrochemical conditions, and facilitate the integration of new data into established concepts of electrochemistry and materials science.
- 22 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTemperature dynamic in electrochemical system under pulse electrolysis mode
The electrochemical system of a silver-aqueous-based electrolyte was examined for temperature dynamics during pulse electrolysis. The temperature of a silver-aqueous-based electrolyte electrochemical system was observed under pulsed electrolysis conditions utilizing resistance temperature detectors. The temperature effects observed in the quasi-stationary layer of this electrochemical system are influenced by the electrochemical behavior of silver, which varies according to the anionic composition of the aqueous electrolyte (OH-, CO32-, F-, SO42-, Cl-) and the rate-limiting transfer of reactants within the electrochemical system. The results obtained provide a basis for developing a methodology to study the electrochemistry of metals under pulsed electrolysis conditions, considering the temperature effects that arise. They also enhance the refinement of theoretical models of electrochemical processes, which account for non-stationary electrochemical conditions, and facilitate the integration of new data into established concepts of electrochemistry and materials science.
- 1 December 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (12) , 124507
Transformation of Pd-PdO/C Electrocatalysts During Cyclic Voltammetry Measurements
A significant methodological aspect frequently overlooked in the discussion of the electrocatalytic characteristics of nanodispersed materials based on metals and metal oxides is the transformation of their phase composition and microstructure during electrochemical pre-treatment. Through the example of Pd-PdO/C electrocatalysts, which exhibit distinct microstructures and varying amounts of PdO, we demonstrated that under the same pre-treatment conditions, achieved by cyclic scanning of the working electrode potential, the Pd-PdO/C electrocatalytic systems exhibited a progressive reduction of the PdO phase. Following pre-treatment, both catalysts demonstrated the same CO-stripping behaviour, irrespective of their phase and microstructural state in the as-prepared condition. The results obtained highlight (i) the potential for error in interpreting pre- and post-electrochemical characterisation of metal/metal oxide-based electrocatalysts and (ii) the necessity of establishing principles to select the protocols of electrochemical pre-treatment for each specific electrocatalytic system.
- 1 December 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (12) , 124507
Transformation of Pd-PdO/C Electrocatalysts During Cyclic Voltammetry Measurements
A significant methodological aspect frequently overlooked in the discussion of the electrocatalytic characteristics of nanodispersed materials based on metals and metal oxides is the transformation of their phase composition and microstructure during electrochemical pre-treatment. Through the example of Pd-PdO/C electrocatalysts, which exhibit distinct microstructures and varying amounts of PdO, we demonstrated that under the same pre-treatment conditions, achieved by cyclic scanning of the working electrode potential, the Pd-PdO/C electrocatalytic systems exhibited a progressive reduction of the PdO phase. Following pre-treatment, both catalysts demonstrated the same CO-stripping behaviour, irrespective of their phase and microstructural state in the as-prepared condition. The results obtained highlight (i) the potential for error in interpreting pre- and post-electrochemical characterisation of metal/metal oxide-based electrocatalysts and (ii) the necessity of establishing principles to select the protocols of electrochemical pre-treatment for each specific electrocatalytic system.
- 15 August 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (32) , 18787-18795
Basic features of Pt/C catalysts synthesised via the non-isothermal decomposition of platinum acetylacetonate
Non-isothermal decomposition of platinum acetylacetonate as a powerful approach for determining the nanoparticle size effects in Pt/C catalysts.
- 15 August 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (32) , 18787-18795
Basic features of Pt/C catalysts synthesised via the non-isothermal decomposition of platinum acetylacetonate
Non-isothermal decomposition of platinum acetylacetonate as a powerful approach for determining the nanoparticle size effects in Pt/C catalysts.
- 3 December 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (12) , 126505
Electrochemistry of Pt and Pd Under Pulse Electrolysis Conditions
Platinum and palladium are the most suitable electrode materials for studying the kinetics and mechanism of various electrochemical processes. Consequently, their behavior in electrochemical systems has been the subject of extensive study. However, the effect of pulse alternating current (PAC) on Pt and Pd in aqueous electrolytes represents a relatively new area of research for electrochemical process technologies. It was demonstrated that employing PAC with a frequency of 50 Hz to platinum in NaOH electrolyte result in the formation of Pt particles (7.6 nm) containing a PtOx phase (0.25 ± 0.03 wt%). The dissolution of platinum in NaCl electrolyte resulted in the formation of only platinum chloride complexes. The palladium in the NaOH electrolyte was passivated when PAC was employing to Pd electrodes. In the NaCl electrolyte, the formation of Pd-PdO particles (42 ± 2 wt% of PdO) was observed. The crystallite size for Pd and PdO was 7.9 and 1.99 nm, respectively. The discrepancy in the chemical properties of two metals belonging to the transition metals of group VIII of the periodic system, which are characterized by the same space group (Fm3m), can be attributed to the combination of electronic and redox properties of Pt and Pd.
- 3 December 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (12) , 126505
Electrochemistry of Pt and Pd Under Pulse Electrolysis Conditions
Platinum and palladium are the most suitable electrode materials for studying the kinetics and mechanism of various electrochemical processes. Consequently, their behavior in electrochemical systems has been the subject of extensive study. However, the effect of pulse alternating current (PAC) on Pt and Pd in aqueous electrolytes represents a relatively new area of research for electrochemical process technologies. It was demonstrated that employing PAC with a frequency of 50 Hz to platinum in NaOH electrolyte result in the formation of Pt particles (7.6 nm) containing a PtOx phase (0.25 ± 0.03 wt%). The dissolution of platinum in NaCl electrolyte resulted in the formation of only platinum chloride complexes. The palladium in the NaOH electrolyte was passivated when PAC was employing to Pd electrodes. In the NaCl electrolyte, the formation of Pd-PdO particles (42 ± 2 wt% of PdO) was observed. The crystallite size for Pd and PdO was 7.9 and 1.99 nm, respectively. The discrepancy in the chemical properties of two metals belonging to the transition metals of group VIII of the periodic system, which are characterized by the same space group (Fm3m), can be attributed to the combination of electronic and redox properties of Pt and Pd.
- Open Access
Pulse Electrolysis Technique for Preparation of Bimetal Tin-Containing Electrocatalytic Materials
Platinum–tin-containing materials are the most popular catalysts for processes occurring in fuel cells with direct ethanol oxidation. Pulse electrolysis based on the electrochemical dispersion of platinum electrodes under the influence of alternating pulse current in an alkaline electrolyte made it possible to introduce the tin component into the catalyst in the form of a dopant, an alloy with platinum, and in the form of an oxide phase and evaluate the effect of the form in which tin is present in the catalyst on its microstructural and electrocatalytic characteristics. The introduction of tin into the catalyst generally increases the rate of ethanol electrooxidation; however, with the most prominent effect observed when tin is present in form of an oxide.
Open AccessPulse Electrolysis Technique for Preparation of Bimetal Tin-Containing Electrocatalytic Materials
Platinum–tin-containing materials are the most popular catalysts for processes occurring in fuel cells with direct ethanol oxidation. Pulse electrolysis based on the electrochemical dispersion of platinum electrodes under the influence of alternating pulse current in an alkaline electrolyte made it possible to introduce the tin component into the catalyst in the form of a dopant, an alloy with platinum, and in the form of an oxide phase and evaluate the effect of the form in which tin is present in the catalyst on its microstructural and electrocatalytic characteristics. The introduction of tin into the catalyst generally increases the rate of ethanol electrooxidation; however, with the most prominent effect observed when tin is present in form of an oxide.
- Open Access
Mode Coupling at around M-Point in PZT
The question of the microscopic origin of the M-superstructure and additional satellite peaks in the Zr-rich lead zirconate-titanate is discussed for nearly 50 years. Clear contradiction between the selection rules of the critical scattering and the superstructure was found preventing unambiguous attributing of the observed superstructure either to the rotation of the oxygen octahedra or to the antiparallel displacements of the lead cations. Detailed analysis of the satellite pattern explained it as the result of the incommensurate phase transition rather than antiphase domains. Critical dynamics is the key point for the formulated problems. Recently, the oxygen tilt soft mode in the PbZrTiO (PZT2.4) was found. But this does not resolve the extinction rules contradiction. The results of the inelastic X-ray scattering study of the phonon spectra of PZT2.4 around M-point are reported. Strong coupling between the lead and oxygen modes resulting in mode anticrossing and creation of the wide flat part in the lowest phonon dispersion curves is identified. This flat part corresponds to the mixture of the displacements of the lead and oxygen ions and can be an explanation of the extinction rules contradiction. Moreover, a flat dispersion surface is a typical prerequisite for the incommensurate phase transition.Open AccessMode Coupling at around M-Point in PZT
The question of the microscopic origin of the M-superstructure and additional satellite peaks in the Zr-rich lead zirconate-titanate is discussed for nearly 50 years. Clear contradiction between the selection rules of the critical scattering and the superstructure was found preventing unambiguous attributing of the observed superstructure either to the rotation of the oxygen octahedra or to the antiparallel displacements of the lead cations. Detailed analysis of the satellite pattern explained it as the result of the incommensurate phase transition rather than antiphase domains. Critical dynamics is the key point for the formulated problems. Recently, the oxygen tilt soft mode in the PbZrTiO (PZT2.4) was found. But this does not resolve the extinction rules contradiction. The results of the inelastic X-ray scattering study of the phonon spectra of PZT2.4 around M-point are reported. Strong coupling between the lead and oxygen modes resulting in mode anticrossing and creation of the wide flat part in the lowest phonon dispersion curves is identified. This flat part corresponds to the mixture of the displacements of the lead and oxygen ions and can be an explanation of the extinction rules contradiction. Moreover, a flat dispersion surface is a typical prerequisite for the incommensurate phase transition. - Open Access
- 13 January 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (1) , 187
Non-Isothermal Decomposition as Efficient and Simple Synthesis Method of NiO/C Nanoparticles for Asymmetric Supercapacitors
A series of NiO/C nanocomposites with NiO concentrations ranging from 10 to 90 wt% was synthesized using a simple and efficient two-step method based on non-isothermal decomposition of Nickel(II) bis(acetylacetonate). X-ray diffraction (XRD) measurements of these NiO/C nanocomposites demonstrate the presence of β-NiO. NiO/C nanocomposites are composed of spherical particles distributed over the carbon support surface. The average diameter of nickel oxide spheres increases with the NiO content and are estimated as 36, 50 and 205 nm for nanocomposites with 10, 50 and 80 wt% NiO concentrations, respectively. In turn, each NiO sphere contains several nickel oxide nanoparticles, whose average sizes are 7–8 nm. According to the tests performed using a three-electrode cell, specific capacitance (SC) of NiO/C nanocomposites increases from 200 to 400 F/g as the NiO content achieves a maximum of 60 wt% concentration, after which the SC decreases. The study of the NiO/C composite showing the highest SC in three- and two-electrode cells reveals that its SC remains almost unchanged while increasing the current density, and the sample demonstrates excellent cycling stability properties. Finally, NiO/C (60% NiO) composites are shown to be promising materials for charging quartz clocks with a power rating of 1.5 V (30 min).
- 13 January 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (1) , 187
Open AccessNon-Isothermal Decomposition as Efficient and Simple Synthesis Method of NiO/C Nanoparticles for Asymmetric Supercapacitors
A series of NiO/C nanocomposites with NiO concentrations ranging from 10 to 90 wt% was synthesized using a simple and efficient two-step method based on non-isothermal decomposition of Nickel(II) bis(acetylacetonate). X-ray diffraction (XRD) measurements of these NiO/C nanocomposites demonstrate the presence of β-NiO. NiO/C nanocomposites are composed of spherical particles distributed over the carbon support surface. The average diameter of nickel oxide spheres increases with the NiO content and are estimated as 36, 50 and 205 nm for nanocomposites with 10, 50 and 80 wt% NiO concentrations, respectively. In turn, each NiO sphere contains several nickel oxide nanoparticles, whose average sizes are 7–8 nm. According to the tests performed using a three-electrode cell, specific capacitance (SC) of NiO/C nanocomposites increases from 200 to 400 F/g as the NiO content achieves a maximum of 60 wt% concentration, after which the SC decreases. The study of the NiO/C composite showing the highest SC in three- and two-electrode cells reveals that its SC remains almost unchanged while increasing the current density, and the sample demonstrates excellent cycling stability properties. Finally, NiO/C (60% NiO) composites are shown to be promising materials for charging quartz clocks with a power rating of 1.5 V (30 min).
- Open Access
A Comparison of “Bottom-Up” and “Top-Down” Approaches to the Synthesis of Pt/C Electrocatalysts
Three 40 wt % Pt/C electrocatalysts prepared using two different approaches—the polyol process and electrochemical dispersion of platinum under pulse alternating current—and a commercial Pt/C catalyst (Johnson Matthey prod.) were examined via X-ray diffraction (XRD) and transmission electron microscopy (TEM). The stability characteristics of the Pt/C catalysts were studied via long-term cycling, revealing that, for all cycling modes, the best stability was achieved for the Pt/C catalyst with the largest platinum nanoparticle sizes, which was synthesized via electrochemical dispersion of platinum under pulse alternating current. Our results show that the mass and specific electrocatalytic activities of Pt/C catalysts toward ethanol electrooxidation are determined by the value of the electrochemically active Pt surface area in the catalysts.
Open AccessA Comparison of “Bottom-Up” and “Top-Down” Approaches to the Synthesis of Pt/C Electrocatalysts
Three 40 wt % Pt/C electrocatalysts prepared using two different approaches—the polyol process and electrochemical dispersion of platinum under pulse alternating current—and a commercial Pt/C catalyst (Johnson Matthey prod.) were examined via X-ray diffraction (XRD) and transmission electron microscopy (TEM). The stability characteristics of the Pt/C catalysts were studied via long-term cycling, revealing that, for all cycling modes, the best stability was achieved for the Pt/C catalyst with the largest platinum nanoparticle sizes, which was synthesized via electrochemical dispersion of platinum under pulse alternating current. Our results show that the mass and specific electrocatalytic activities of Pt/C catalysts toward ethanol electrooxidation are determined by the value of the electrochemically active Pt surface area in the catalysts.