BNBasim Khalil Nile

Basim Khalil Nile

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Basim Khalil Nile has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hydraulic modeling of the main sewer conveyance pipeline in Central Karbala during mass religious pilgrimages and rainfall events

    by Ali N. Ghulam, Basim K. Nile, Jabbar H. Al-Baidhani

    Sewage networks are one of the most critical elements of the urban infrastructure that is fundamental for the protection of public health and environment. This requires not only constant monitoring but also evaluation to ensure that the systems are functioning. Karbala hosts millions of yearly pilgrims which places an enormous hydraulic load on the sewerage system. This is even more severe during the pilgrimage season due to rainfall-derived infiltration and inflow where parts of the network may be overloaded or failed. The objective of this study is to investigate how the large main sewage pipeline located in the center of Karbala City behaves when subjected to the pressure applied during visitors' movement and rainfall events, using Personal Computer Storm Water Management Model software and Geographic Information Systems (GIS). The available data were then collated, processed, and pooled together with hydraulic modeling representing different human and climatic loading scenarios. The results demonstrated that this pipe was adequate to accommodate peak visitor numbers in dry conditions, and each visitor produces discharge into the network of approximately 29 l/d. In rainy conditions, rainfall intensity within the range of 17–21 mm/h was identified as the hydraulic failure threshold for the pipeline.

  • Open Access

    Ammonia Removal from Wastewater Using ZnO-Modified Ceratophyllum as a Low-Cost Eco-Friendly Biosorbent

    by Furqan Ridha, Basim Khalil Nile, Maad Farouk

    The results of its detrimental effects on water quality and toxicity to aquatic life, as well as ammonia contamination in wastewater, indicated that noticeable environmental risk. Moreover, there was another important factor in this field are conventional treatment techniques lead to pollution and operative budget. It is important to produce a balance between the low-cost treatment and keeping the sustainability and efficiency in the environmentally friendly adsorbents. Here, in this current work, an efforts were conducted to investigate an eco-friendly bio sorbent for ammonia extraction, that is depends on Ceratophyllum and is modified with zinc oxide (ZnO). To do the creation of adsorbent, ZnO nanoparticles have been impregnated into dried Ceratophyllum powder. The evaluation of the results was conducted by utilising scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) surface area analysis, and X-ray diffraction (XRD). To measure the influence of temperature, stirring speed, pH, and contact time on removal efficiency, batch adsorption tests were carried out. SEM, BET, FTIR, and XRD investigations verified the ZnO-modified Ceratophyllum's enlarged surface roughness, better porosity, and the emergence of Zn–O functional groups. The bio sorbent demonstrated a notable enhancement over the raw material, attaining an 82% removal efficiency for ammonia under optimal conditions (pH = 8, contact duration = 60 min, stirring speed = 200 rpm, and ambient temperature = 25 °C). The results showed that zinc oxide-modified Ceratophyllum is a cheap, environmentally friendly, and highly effective absorbent for large-scale wastewater treatment, providing a sustainable alternate to traditional technologies.

  • Open Access

    Evaluation of the Capacity of Main Sewage Pipeline in The Center of Karbala City Under the Impact of The Rainfall Derived Infiltration and Inflow (RDII)

    by Ali N. Ghulam, Basim K. Nile, Jabbar H. Al-Baidhani

    The sanitary sewer network is one of the most important pillars of infrastructure and is affected by many variablestoday. The aging of the network, increasing urbanization, climate change and high consumption all lead to a continuous challengeto the operation and efficiency of the network. One of the most important problems facing sewage networks is the RainfallDerived Infiltration and Inflow (RDII), which is one of the main causes of sewer overflows with the negative repercussions itcauses to health and the environment. The current research focused on evaluating the effect of the RDII on the capacity of themain sewage pipe in the center of Karbala city in Iraq, that receives millions of pilgrims annually during a short period of timeduring which the sewage network is under high consumption pressure. recorded data of discharge and rainfall were analyzedusing the SSOAP and PCSWMM software. The analysis results showed that high levels of RDII entered the network during arainfall depth of 25 mm, which led to an increase in maximum hourly discharge to 86%, an increase in total daily discharge to21.5% and the capacity of the main pipe in the critical area reached 91%.

  • Open Access

    Trends, forecasting and adaptation strategies of climate change in the middle and west regions of Iraq

    by Waqed H. Hassan, Basim K. Nile, Zahraa K. Kadhim, Karrar Mahdi, Michel Riksen, Rifqa F. Thiab

    Climate change has placed considerable pressure on the residential environment, agricultural, and water supplies in different areas of the world, especially arid places such as Iraq. Iraq is one of the five most vulnerable countries in the world to climate change, where it has been encountering extremes heat waves during the most recent decades resulted in drought, desertification, and rivers dried up, which led to thousands of hectares to turn dry and yellow. This study aims to investigate the trends of climate change in the middle and western regions of Iraq and future expectations. The daily maximum temperature, minimum temperature, and precipitation are downscaled using the Long Ashton Research Station Weather Generator (LARS-WG) model. Five General Circulation Models (GCMs) from Coupled Model Intercomparison Project Phase 5 (CMIP5) are employed for three future periods: the near future (2021–2040), medium future (2051–2070), and far future (2081–2100), based on two scenarios of the Representative Concentration Pathways (RCP4.5 and RCP8.5) for four selected meteorological stations representing the study area. The outcomes of the calibration and validation of the model supported its skill and reliability to downscale precipitation and temperature time series for statistical indices (R2, RMSE and MBE) ranging between (0.894–0.998), (0.1270–1.9274) and (− 0.6158 to 0.0008), respectively. The results showed that the average minimum and maximum annual temperatures will increase at all selected stations across the three future periods by between 0.94 and 4.98 °C by the end of the twenty-first century. Annual changes in precipitation tend generally towards increase for the study area by average (6.09–14.31%) for RCP4.5 and (11.25–20.97%) for RCP8.5 Compared to the historical data (1990–2020). These findings can contribute to become more acquainted with the effects of climate change on the environment and encourage managers and planners to come up with plans for mitigating and adapting to these effects. They can also serve as a guide for future management of water and agricultural resources in the study region.


  • Application of the Coupled Simulation–optimization Method for the Optimum Cut-off Design Under a Hydraulic Structure

    by Waqed H. Hassan, Hussein H. Hussein, Duaa H. Khashan, Musa H. Alshammari, Basim K. Nile


  • Open Access

    A Dimensional Analysis of Local Sandy Soil Erosion Induced By Leaky Sewer Pipes

    by Basim Kh. Nile, Jabbar H. Al-Baidhani, Ali N. Ghulam

    Soil erosion is the most important reason that leads directly to the formation of sinkholes in the roads of urban areas. Soil erosion occurs due to the movement of water from and into the surrounding soil through defects in sewer pipes. In the present study, dimensional analysis of the erosion process was carried out and a dimensionless model was proposed to estimate the rate of erosion for local sandy soil. Model tests were conducted under a varying matrix of influencing parameters including: leak size, soil particle size, initial water content, water flow rate, height of water level above the defect in soil, and number of water flow cycle. The experimental model involved soil exposed to cyclic water flow through leaks located at the bottom of the model. Eroded soil is collected, dried, weighted and sieved for each cycle. From the results, it was found that the proposed dimensional analysis prediction model can reasonably estimate the rate of erosion for the local sandy soil.


  • Open Access

    Modelling Stilling Basins for Sewage Networks

    by Shahad R. Mohammed, Basim K. Nile, Waqed H. Hassan

    Concrete elements play an effective role in stilling basin design in terms of enhancing the dissipation of energy to prevent immoderate scouring of downstream structures. Proper appurtenances, such as wedge-shaped splitter blocks, baffle walls, inverted t-sections, rectangular walls, inverted L sections, and impact walls, are thus utilised with circular pipe outlets to create stilling basins that are shorter yet more effective, and thus more economical. This research was based on numerical analysis of stilling basins using FLOW-3D software; the resulting Froude numbers were compared with the Froude number of a case study, a stilling basin manhole created by the Karbala Government. This research thus examined the influence of Froude number, the arrangement and location of dissipators, and the height of the pipe inlet under different hydraulic condition in order to better simulate stilling basin models. The turbulent energy dissipation was found to vary from 16% to 85%. The results from the models showed that L-sections offered maximum turbulent energy dissipation (ΔE/E1), while the rectangular wall shape gave minimum turbulent energy dissipation (ΔE/E1). It was also observed that the maximum turbulent kinetic energy almost always occurred in the initial sections, with flow becoming generally less turbulent at the end sections. Thus, at the end of all stilling basins, the turbulent kinetic energy dissipation and turbulent kinetic energy profiles became more uniform. The proposed numerical simulation using FLOW-3D was shown to be a reliable tool for predicting and discussing the turbulent energy dissipation in stilling basins. Further conclusions included the fact that the maximum turbulent energy dissipation (ΔE/E1) increases as values of Fr increase. The results of this research could thus help hydraulic designers to consider their selections for the optimum design of stilling basins more carefully.


  • Open Access

    An evaluation of flood mitigation using a storm water management model [SWMM] in a residential area in Kerbala, Iraq

    by B K Nile, W H Hassan, B A Esmaeel

    The control of the urban flooding is one of the major challenges currently facing decision makers and municipalities. Flooding rates increase positively with increases in urbanisation, climate change, and a lack of consideration when using drainage networks. In the Middle East, and in Iraq especially, research in the field of flood control has been rare prior to this study. This study thus aims to provide technical support for decision makers by offering a proposed solution to mitigate flooding in a case study in Kerbala, Iraq. A storm-water management model [SWMM] has been utilised to check the extent to which the proposed solution will mitigate the flooding in the study area. SWMM was used to simulate the network in the study area utilising hourly precipitation intensity data from 2008 to 2016, and with the inclusion of estimated illegitimate sewage quantities. The results indicated that the solution was effective, and the percentage of sewer holes flooding under maximum rainfall intensity of 33.5 mm/hr saw a decrease from 48% to 33%; flooding occurred in the study area only with discharges greater than 0.04 m 3 /sec, and the flooding duration also decreased from 72 hours to 26 hours.


  • Open Access

    Effectiveness of Hydraulic and Hydrologic Parameters in Assessing Storm System Flooding

    by Basim K. Nile

    Storm sewer systems face many challenges in urban areas, in particular those systems which are old and surpassing their design period. This study has used data from an urbanized, subcatchment covering 360 ha of dead run watershed in the Alkadeer district, Karbala, Iraq. Physically based models, Autodesk Storm and Sanitary Analysis (ASSA) and multiple nonlinear regression (MNLR), were applied. Hydrology data from 1980 to 2013 were inputted and examined over three scenarios. The results indicated that significant increase in peak flooding was produced by an increase in discharge values which may occur through a higher rainfall intensity. The model was examined and new equations were developed that may help us to better understand the hydraulic and hydrologic simulations that are identified as having the potential to better protect the environment against sudden rainfall intensities. The ratio of area of subcatchment to cross‐sectional area of a pipe (Ac/Ap), the ratio of slope of subcatchment to slope of a pipe (Sc/Sp), and the ratio of velocity in subcatchment to velocity in a pipe (Vc/Vp) were the most sensitive parameters informing the ratio of runoff discharge of a subcatchment pipe discharge (Qc/Qp). This study suggests that a more effective management of the storm water system under critical circumstances could be achieved by limiting the above parameters and this increases the efficiency of storm water facilities.


  • Open Access

    Climate change effect on storm drainage networks by storm water management model

    by Waqed Hammed Hassan, Basim Khalil Nile, Batul Abdullah Al-Masody

    One of the big problems facing municipalities is the management and control of urban flooding where urban drainage systems are under growing pressure due to increases in urbanization, population and changes in the climate. Urban flooding causes environmental and infrastructure damage, especially to roads, this damage increasing maintenance costs. The aim of the present study is to develop a decision support tool to identify the performance of storm networks to address future risks associated with climate change in the Middle East region and specifically, illegal sewer connections in the storm networks of Karbala city, Iraq. The storm water management model has been used to simulate Karbala's storm drainage network using continuous hourly rainfall intensity data from 2008 to 2016. The results indicate that the system is sufficient as designed before consideration of extra sewage due to an illegal sewer connection. Due to climate changes in recent years, rainfall intensity has increased reaching 33.54 mm/h, this change led to flooding in 47% of manholes. Illegal sewage will increase flooding in the storm system at this rainfall intensity from between 39% to 52%.