Seyed Amir Bahrani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Seyed Amir Bahrani has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Tom Lacassagne
IMT Nord Europe
9 shared publications André Bontemps
5 shared publicationsCatherine Loisel
LUNAM Université, ONIRIS, CNRS, GEPEA, UMR 6144, Site de la Géraudière, Nantes F-44322, France
4 shared publications- Francesco Romanò
Univ. Lille
4 shared publications - Sid-Ahmed Rezzoug
Laboratoire LaSIE, UMR-CNRS 7356, La Rochelle Université, Avenue Michel Crépeau, 17042 La Rochelle, France
4 shared publications - Antoine Charles
IMT Nord Europe, Institut Mines-Télécom, Center for Energy and Environment 1 , 59000 Lille, France
3 shared publications
Latest Publications
- Open Access
- 28 August 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1041, A29
On the role of polymer–particle interactions in elasto-inertial dissipation in Taylor–Couette flow
Complex suspensions composed of solid particles dispersed in non-Newtonian liquid matrices are ubiquitous in environmental and industrial processes, where their nonlinear rheological response directly impacts the efficiency and predictability of momentum, heat and mass transfer. Here, we experimentally investigate the interplay between non-colloidal spherical particles and high-molecular-weight polymer chains in the canonical Taylor–Couette flow, a configuration where recent experiments have revealed the emergence of an elasto-inertial dissipation (EID) behaviour whose underlying mechanisms remain unclear. Using a polyacrylamide Boger fluid loaded with particles at varying concentrations, we perform systematic rheological measurements and long-duration shear experiments to quantify viscosity, elasticity and the degradation dynamics. Torque monitoring shows that particle addition accelerates polymer chain scission and reduces the asymptotic viscosity. Ramp-up protocols reveal torque-drop behaviour characteristic of EID, which can be qualitatively reproduced by a cumulative-shear degradation model derived from steady-shear data. However, the inability of this model to capture the strong dependence on particle volume fraction indicates that additional semi-dilute particle–polymer interaction mechanisms are at play. In particular, by relating average interparticle distance to the maximum polymer chain extension, we identify a critical particle volume fraction ( upper Phi asymptotically equals 4 percent sign $\varPhi \simeq 4\,\%$ ) coinciding with the observed transition from elasto-inertial turbulence (EIT) to EID. These findings show, that while polymer degradation is a key contributor to dissipation, confinement of stretched chains between particles is a more likely mechanism for the suppression of EIT. This dual influence of degradation and particle–polymer interactions offers new insight into rheo-hydrodynamic transitions in complex suspensions and their implications for industrial applications.- 28 August 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1041, A29
Open AccessOn the role of polymer–particle interactions in elasto-inertial dissipation in Taylor–Couette flow
Complex suspensions composed of solid particles dispersed in non-Newtonian liquid matrices are ubiquitous in environmental and industrial processes, where their nonlinear rheological response directly impacts the efficiency and predictability of momentum, heat and mass transfer. Here, we experimentally investigate the interplay between non-colloidal spherical particles and high-molecular-weight polymer chains in the canonical Taylor–Couette flow, a configuration where recent experiments have revealed the emergence of an elasto-inertial dissipation (EID) behaviour whose underlying mechanisms remain unclear. Using a polyacrylamide Boger fluid loaded with particles at varying concentrations, we perform systematic rheological measurements and long-duration shear experiments to quantify viscosity, elasticity and the degradation dynamics. Torque monitoring shows that particle addition accelerates polymer chain scission and reduces the asymptotic viscosity. Ramp-up protocols reveal torque-drop behaviour characteristic of EID, which can be qualitatively reproduced by a cumulative-shear degradation model derived from steady-shear data. However, the inability of this model to capture the strong dependence on particle volume fraction indicates that additional semi-dilute particle–polymer interaction mechanisms are at play. In particular, by relating average interparticle distance to the maximum polymer chain extension, we identify a critical particle volume fraction ( upper Phi asymptotically equals 4 percent sign $\varPhi \simeq 4\,\%$ ) coinciding with the observed transition from elasto-inertial turbulence (EIT) to EID. These findings show, that while polymer degradation is a key contributor to dissipation, confinement of stretched chains between particles is a more likely mechanism for the suppression of EIT. This dual influence of degradation and particle–polymer interactions offers new insight into rheo-hydrodynamic transitions in complex suspensions and their implications for industrial applications. - 30 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Modification des propriétés physico-chimiques de l'amidon par procédés hydrothermiques : Contribution à l'étude des transferts couplés chaleur-masse
L’amidon, biopolymère de réserve, composant majeur des céréales et des plantes de grande culture, trouve de nombreuses applications industrielles après transformation hydrothermique. L’objectif de la thèse est d’étudier les modifications des propriétés structurales et fonctionnelles de l’amidon de maïs standard modifié par traitement physique, de type hydrothermique à l’aide de trois procédés. L’intensification des traitements, dans un contexte où le développement durable apparaît comme une priorité majeure, s’inscrit dans la large thématique de la valorisation des agro-ressources et du développement des procédés de transformation consacrés aux ressources carbonées renouvelables. La caractérisation des modifications des propriétés physicochimiques de l’amidon,générées par les traitements a été réalisée, dans l’objectif de relier les différences aux comportements thermique(transitions de phase, empesage) et rhéologique (comportement à l’écoulement et viscoélasticité) des amidons hydrotraités. Les traitements physiques appliqués aux amidons ont conduit à des modifications plus ou moins importantes de leurs structures. La maîtrise de l’utilisation de l'amidon nécessite la bonne connaissance des transitions de phase impliquées et des structures résultantes, fonction principalement de la teneur en eau et de la température. Dans cet objectif, une partie des travaux de thèse a été consacrée à la compréhension des phénomènes physiques à l’origine des transferts de matière et de chaleur dans le matériau amylacé pendant son hydrotraitement, ainsi que les équations régissant ces transferts. Un modèle phénomènologique de transfert couplé de masse et de chaleur a été développé, tenant compte des réactions biochimiques qui ont lieux simultanément dans le matériau, en présence d’eau et de chaleur. Les résultats de la modélisation numérique, à l’aide de la méthode des éléments finis, a permis de définir la répartition spatiale, des paramètres variables(température, teneur en eau,…), dont l’influence est déterminante sur la progression des réactions de fusion.
- 30 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Modification des propriétés physico-chimiques de l'amidon par procédés hydrothermiques : Contribution à l'étude des transferts couplés chaleur-masse
L’amidon, biopolymère de réserve, composant majeur des céréales et des plantes de grande culture, trouve de nombreuses applications industrielles après transformation hydrothermique. L’objectif de la thèse est d’étudier les modifications des propriétés structurales et fonctionnelles de l’amidon de maïs standard modifié par traitement physique, de type hydrothermique à l’aide de trois procédés. L’intensification des traitements, dans un contexte où le développement durable apparaît comme une priorité majeure, s’inscrit dans la large thématique de la valorisation des agro-ressources et du développement des procédés de transformation consacrés aux ressources carbonées renouvelables. La caractérisation des modifications des propriétés physicochimiques de l’amidon,générées par les traitements a été réalisée, dans l’objectif de relier les différences aux comportements thermique(transitions de phase, empesage) et rhéologique (comportement à l’écoulement et viscoélasticité) des amidons hydrotraités. Les traitements physiques appliqués aux amidons ont conduit à des modifications plus ou moins importantes de leurs structures. La maîtrise de l’utilisation de l'amidon nécessite la bonne connaissance des transitions de phase impliquées et des structures résultantes, fonction principalement de la teneur en eau et de la température. Dans cet objectif, une partie des travaux de thèse a été consacrée à la compréhension des phénomènes physiques à l’origine des transferts de matière et de chaleur dans le matériau amylacé pendant son hydrotraitement, ainsi que les équations régissant ces transferts. Un modèle phénomènologique de transfert couplé de masse et de chaleur a été développé, tenant compte des réactions biochimiques qui ont lieux simultanément dans le matériau, en présence d’eau et de chaleur. Les résultats de la modélisation numérique, à l’aide de la méthode des éléments finis, a permis de définir la répartition spatiale, des paramètres variables(température, teneur en eau,…), dont l’influence est déterminante sur la progression des réactions de fusion.
- 12 February 2026
- Published by Springer Nature in Experiments in Fluids
- Vol. 67 (3) , 30
Mixing efficiency in Taylor-Couette flow of complex suspensions
- 12 February 2026
- Published by Springer Nature in Experiments in Fluids
- Vol. 67 (3) , 30
Mixing efficiency in Taylor-Couette flow of complex suspensions
- Open Access
- 17 November 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1023
Non-Newtonian and surfactant effects on the liquid plug rupture in an airway reopening model
Elastoviscoplastic effects on liquid plug propagation and rupture occurring in airways are studied computationally using the Oldroyd-B and Saramito–Herschel–Bulkley models. The relevant parameters are selected from physiological values representative of the eighth-to-tenth generation branches of a typical adult lung. The respiration pushes the liquid plug, depositing a trailing film thicker than the leading film. As a result, the liquid plug gets drained and eventually ruptures. We model airway reopening considering a rigid axisymmetric tube whose inner surface is coated by a thin non-Newtonian liquid film. A critical elastic behaviour is revealed: for low Weissenberg number (subcritical), the viscoelastic stress is released in the liquid plug, while for high Weissenberg number (supercritical), the stretched polymeric chains release their stresses in the trailing film, giving rise to (i) hoop stress that increases the film thickness and (ii) axial stress that leads to a speed-up of the liquid plug. Under supercritical conditions, we also identify a resonance that amplifies the elastic stresses. A mechanical analogy is proposed to elucidate the resonance phenomenon. The occurrence of the resonance is robust upon a variation of Weissenberg number, Laplace number, reference solvent-to-total dynamic viscosity ratio, the surfactant elastoviscoplastic mucus. Our simulations confirm that a presence of surfactants do not significantly affect the results, except for the expected delay of airway reopening due to air–mucus surface contamination. Such a novel elastocapillary mechanism increases the risk of epithelial cell damage regardless of the occurrence of plug rupture.
- 17 November 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1023
Open AccessNon-Newtonian and surfactant effects on the liquid plug rupture in an airway reopening model
Elastoviscoplastic effects on liquid plug propagation and rupture occurring in airways are studied computationally using the Oldroyd-B and Saramito–Herschel–Bulkley models. The relevant parameters are selected from physiological values representative of the eighth-to-tenth generation branches of a typical adult lung. The respiration pushes the liquid plug, depositing a trailing film thicker than the leading film. As a result, the liquid plug gets drained and eventually ruptures. We model airway reopening considering a rigid axisymmetric tube whose inner surface is coated by a thin non-Newtonian liquid film. A critical elastic behaviour is revealed: for low Weissenberg number (subcritical), the viscoelastic stress is released in the liquid plug, while for high Weissenberg number (supercritical), the stretched polymeric chains release their stresses in the trailing film, giving rise to (i) hoop stress that increases the film thickness and (ii) axial stress that leads to a speed-up of the liquid plug. Under supercritical conditions, we also identify a resonance that amplifies the elastic stresses. A mechanical analogy is proposed to elucidate the resonance phenomenon. The occurrence of the resonance is robust upon a variation of Weissenberg number, Laplace number, reference solvent-to-total dynamic viscosity ratio, the surfactant elastoviscoplastic mucus. Our simulations confirm that a presence of surfactants do not significantly affect the results, except for the expected delay of airway reopening due to air–mucus surface contamination. Such a novel elastocapillary mechanism increases the risk of epithelial cell damage regardless of the occurrence of plug rupture.
- 1 June 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (6)
Measurement of heat transfer and mixing enhancement by chaotic advection: Experimental methods
The enhancement of heat and mass transfer is key to designing energy-efficient industrial devices with the lowest environment impact, a challenge for sustainable development and energy transition. Several approaches can be used, either by extending the transfer surface and/or by acting on the fluid flow to increase the heat transfer rate, in passive or active manners. In this Review, the focus is placed on one type of passive technique, known as chaotic advection, which generates unsteady and irregular fluid motion at relatively low flow rates, with negligible additional energy input, thus enhancing mixing and mass transfer. Chaotic advection is used in a wide range of applications and fields, including fluid mixing, heat exchangers, and microfluidics. In this context, experimental methods offer a direct means of observing, quantifying, and unraveling the complexity of fluid dynamics coupled with heat transfer and ultimately finding effective strategies for intensifying exchanges. The main purpose of this review paper is to summarize experimental techniques used in the literature, both local and global, enabling an in-depth examination of the interplay between chaotic advection, heat transfer, and mixing efficiency. To this end, a compilation of methods for visualizing and quantifying transfer mechanisms is detailed in this Review. They give access to local velocity and scalar fields and help depict chaotic transfer mechanisms. Several global parameters and performance coefficients are also defined, providing valuable information on overall thermohydraulic efficiency. The advantages and drawbacks of the different experimental techniques presented are discussed. Finally, this Review also discusses some promising experimental techniques that have not yet been used in the literature, in the context of chaotic exchangers, but hold the potential to deepen our understanding of both external and internal mixing and thermal behavior of such systems.
- 1 June 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (6)
Measurement of heat transfer and mixing enhancement by chaotic advection: Experimental methods
The enhancement of heat and mass transfer is key to designing energy-efficient industrial devices with the lowest environment impact, a challenge for sustainable development and energy transition. Several approaches can be used, either by extending the transfer surface and/or by acting on the fluid flow to increase the heat transfer rate, in passive or active manners. In this Review, the focus is placed on one type of passive technique, known as chaotic advection, which generates unsteady and irregular fluid motion at relatively low flow rates, with negligible additional energy input, thus enhancing mixing and mass transfer. Chaotic advection is used in a wide range of applications and fields, including fluid mixing, heat exchangers, and microfluidics. In this context, experimental methods offer a direct means of observing, quantifying, and unraveling the complexity of fluid dynamics coupled with heat transfer and ultimately finding effective strategies for intensifying exchanges. The main purpose of this review paper is to summarize experimental techniques used in the literature, both local and global, enabling an in-depth examination of the interplay between chaotic advection, heat transfer, and mixing efficiency. To this end, a compilation of methods for visualizing and quantifying transfer mechanisms is detailed in this Review. They give access to local velocity and scalar fields and help depict chaotic transfer mechanisms. Several global parameters and performance coefficients are also defined, providing valuable information on overall thermohydraulic efficiency. The advantages and drawbacks of the different experimental techniques presented are discussed. Finally, this Review also discusses some promising experimental techniques that have not yet been used in the literature, in the context of chaotic exchangers, but hold the potential to deepen our understanding of both external and internal mixing and thermal behavior of such systems.
- Open Access
- 8 May 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 274
External exchanges around a Chaotic Helix Exchanger in a thermal energy storage tank
- 8 May 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 274
Open AccessExternal exchanges around a Chaotic Helix Exchanger in a thermal energy storage tank
- 1 April 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Helical and chaotic heat exchangers: Flow regimes and efficiency
Helical coiled tubes are renowned for enhancing mixing and promoting heat transfer efficiency, making them highly valuable in various heat transfer applications. Nevertheless, the stabilizing effects of secondary flows in helical coils extends the laminar regime to higher Reynolds numbers than in straight pipes. This persistence of laminar flow state reduces longitudinal mixing and consequently limits the rates of convective heat transfer. This research introduces a novel chaotic heat exchanger designed to induce chaotic advection through an alternating Dean flow. To take advantage of a coiled system while improving its performance within the laminar regime of applications. The primary goal is to demonstrate the enhanced capabilities of our chaotic heat exchanger by comparing its performance against traditional helical coils. Utilizing Direct Numerical Simulation, our study explores the flow and heat transfer characteristics within both designs. Results reveal that the new configuration significantly improves hydro-thermal performance and demonstrates great potential across a Reynolds number range of 800–8600. Additionally, the study provides an in-depth analysis of the flow structures and examines the development of the thermal boundary layer, while highlighting the role of chaotic advection in enhancing mixing efficiency.
- 1 April 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Helical and chaotic heat exchangers: Flow regimes and efficiency
Helical coiled tubes are renowned for enhancing mixing and promoting heat transfer efficiency, making them highly valuable in various heat transfer applications. Nevertheless, the stabilizing effects of secondary flows in helical coils extends the laminar regime to higher Reynolds numbers than in straight pipes. This persistence of laminar flow state reduces longitudinal mixing and consequently limits the rates of convective heat transfer. This research introduces a novel chaotic heat exchanger designed to induce chaotic advection through an alternating Dean flow. To take advantage of a coiled system while improving its performance within the laminar regime of applications. The primary goal is to demonstrate the enhanced capabilities of our chaotic heat exchanger by comparing its performance against traditional helical coils. Utilizing Direct Numerical Simulation, our study explores the flow and heat transfer characteristics within both designs. Results reveal that the new configuration significantly improves hydro-thermal performance and demonstrates great potential across a Reynolds number range of 800–8600. Additionally, the study provides an in-depth analysis of the flow structures and examines the development of the thermal boundary layer, while highlighting the role of chaotic advection in enhancing mixing efficiency.
- Open Access
- 24 December 2024
- Published by Elsevier in Thermal Science and Engineering Progress
- Vol. 57
Energy efficiency enhancement with a chaotic helix exchanger
- 24 December 2024
- Published by Elsevier in Thermal Science and Engineering Progress
- Vol. 57
Open AccessEnergy efficiency enhancement with a chaotic helix exchanger
- Open Access
- 10 October 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 997, A19
Elasto-inertial dissipation in particle-laden viscoelastic Taylor–Couette flow
Many natural and industrial processes involve the flow of fluids made of solid particles suspended in non-Newtonian liquid matrices, which are challenging to control due to the fluid's nonlinear rheology. In the present work, a Taylor–Couette canonical system is used to investigate the flow of dilute to semi-dilute suspensions of neutrally buoyant spherical particles in highly elastic base polymer solutions. Friction measurement synchronized with direct flow visualization are combined to characterize the critical conditions for the onset of elasto-inertial instabilities, expected here as a direct transition to elasto-inertial turbulence (EIT). Adding a low particle volume fraction ( ${\leq }2\,\%$ , dilute regime) does not affect the nature of the primary transition and reduces the critical Weissenberg number for the onset of EIT, despite a significant decrease in the apparent fluid elasticity. However, for particle volume fractions ${\geq }6\,\%$ (semi-dilute regime), EIT is no longer observed in the explored Reynolds range, suggesting an apparent relaminarization with yet not further decrease in fluid elasticity. Instead, a new regime, termed here elasto-inertial dissipative (EID), was uncovered. It originates from particle–particle interactions altering particle–polymer interactions and occurring under elasto-inertial conditions comparable to those of EIT. Increasing particle volume fraction in the semi-dilute regime and, in so, the particle contribution to the overall viscosity, delays the onset of EID similarly to what was observed previously for EIT in lower elasticity fluids. After this onset, a decrease in the pseudo-Nusselt number observed with increasing inertia and particle-to-polymer concentration ratio confirms a particle-induced alteration of energy transfer in the flow.- 10 October 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 997, A19
Open AccessElasto-inertial dissipation in particle-laden viscoelastic Taylor–Couette flow
Many natural and industrial processes involve the flow of fluids made of solid particles suspended in non-Newtonian liquid matrices, which are challenging to control due to the fluid's nonlinear rheology. In the present work, a Taylor–Couette canonical system is used to investigate the flow of dilute to semi-dilute suspensions of neutrally buoyant spherical particles in highly elastic base polymer solutions. Friction measurement synchronized with direct flow visualization are combined to characterize the critical conditions for the onset of elasto-inertial instabilities, expected here as a direct transition to elasto-inertial turbulence (EIT). Adding a low particle volume fraction ( ${\leq }2\,\%$ , dilute regime) does not affect the nature of the primary transition and reduces the critical Weissenberg number for the onset of EIT, despite a significant decrease in the apparent fluid elasticity. However, for particle volume fractions ${\geq }6\,\%$ (semi-dilute regime), EIT is no longer observed in the explored Reynolds range, suggesting an apparent relaminarization with yet not further decrease in fluid elasticity. Instead, a new regime, termed here elasto-inertial dissipative (EID), was uncovered. It originates from particle–particle interactions altering particle–polymer interactions and occurring under elasto-inertial conditions comparable to those of EIT. Increasing particle volume fraction in the semi-dilute regime and, in so, the particle contribution to the overall viscosity, delays the onset of EID similarly to what was observed previously for EIT in lower elasticity fluids. After this onset, a decrease in the pseudo-Nusselt number observed with increasing inertia and particle-to-polymer concentration ratio confirms a particle-induced alteration of energy transfer in the flow. - Open Access
- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
Asymmetry and intermittency in the rheo-inertial transition to turbulence in pipe flow
Transition to turbulence in pipe has been extensively studied but is still not completely understood and even more for non-Newtonian fluids. We focus here on yield stress shear-thinning fluids and the mechanism leading to the transition in pipe, the so-called rheo-inertial transition to turbulence. An experimental setup has enabled us to identify flow regimes in a cylindrical pipe, using both flow visualizations and pressure drops measurements for a range of Reynolds numbers. We delimited the non-Newtonian specific regime in the laminar-turbulent transition triggered at a critical Reynolds number below the turbulent puffs onset. This pre-transition regime is associated with a velocity profile asymmetry in which its degree and position evolve as the Reynolds number increases. The origin for the stability of this rheo-inertial regime is discussed, as it could be due to a competition between the nonlinear contributions of rheological behavior and flow inertia. Beyond this regime, we quantified the intermittence of puff transit, revealing the delay to turbulence. We spotted for the first time a different rheo-inertial transitional behavior in the intermittency evolution vs Reynolds number, displaying a smoother transition on a broader range. Finally, the critical Reynolds numbers for different yield stresses are compared with previous works, and the novelty is the linear increase in the delay to turbulent puffs with the yield stress.
- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
Open AccessAsymmetry and intermittency in the rheo-inertial transition to turbulence in pipe flow
Transition to turbulence in pipe has been extensively studied but is still not completely understood and even more for non-Newtonian fluids. We focus here on yield stress shear-thinning fluids and the mechanism leading to the transition in pipe, the so-called rheo-inertial transition to turbulence. An experimental setup has enabled us to identify flow regimes in a cylindrical pipe, using both flow visualizations and pressure drops measurements for a range of Reynolds numbers. We delimited the non-Newtonian specific regime in the laminar-turbulent transition triggered at a critical Reynolds number below the turbulent puffs onset. This pre-transition regime is associated with a velocity profile asymmetry in which its degree and position evolve as the Reynolds number increases. The origin for the stability of this rheo-inertial regime is discussed, as it could be due to a competition between the nonlinear contributions of rheological behavior and flow inertia. Beyond this regime, we quantified the intermittence of puff transit, revealing the delay to turbulence. We spotted for the first time a different rheo-inertial transitional behavior in the intermittency evolution vs Reynolds number, displaying a smoother transition on a broader range. Finally, the critical Reynolds numbers for different yield stresses are compared with previous works, and the novelty is the linear increase in the delay to turbulent puffs with the yield stress.