Tian Tan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tian Tan has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Pui-Kit Lee
School of Energy and Environment, City University of Hong Kong, Hong Kong SAR, People’s Republic of China
5 shared publications- Denis Yau Wai Yu
Center for Green Research on Energy and Environmental Materials, National Institute for Materials Science (NIMS), Tsukuba, Ibaraki 305-0044, Japan
4 shared publications Alicia Kyoungjin An
1 shared publication- Chun-Sing Lee
Center of Super-Diamond and Advanced Films (COSDAF) and Department of Chemistry, City University of Hong Kong, Hong Kong, China
1 shared publication Denis Y.W. Yu
1 shared publicationJiaxin Guo
1 shared publication
Latest Publications
- 1 October 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (10) , 100527
Improving Thermal Stability of Si-Based Anodes for Lithium-Ion Batteries by Controlling Bulk and Surface Layer Compositions
Si-based anodes are promising candidates for next-generation lithium-ion batteries (LIBs). Apart from electrochemical performances, their thermal stability needs immediate attention as it relates to battery safety and commercialization. In this work, we use differential scanning calorimetry (DSC) to systematically compare the thermal behaviors of silicon (Si) and silicon monoxide (SiO) electrodes with different state of charge and electrolytes. It is possible to reduce heat generation not only by reducing the amount of lithiation but also with the incorporation of oxygen matrix in the material. Moreover, the existence of robust F-containing species on the electrode surface with the addition of fluoroethylene carbonate (FEC) into the electrolyte reduces reaction between electrolyte and active material, leading to lower heat generation. Though, larger amount of FEC results in more heat as FEC is more exothermic than ethylene carbonate. Better thermal stability of Si and SiO is achievable by optimizing the FEC content in the electrolyte.
- 1 October 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (10) , 100527
Improving Thermal Stability of Si-Based Anodes for Lithium-Ion Batteries by Controlling Bulk and Surface Layer Compositions
Si-based anodes are promising candidates for next-generation lithium-ion batteries (LIBs). Apart from electrochemical performances, their thermal stability needs immediate attention as it relates to battery safety and commercialization. In this work, we use differential scanning calorimetry (DSC) to systematically compare the thermal behaviors of silicon (Si) and silicon monoxide (SiO) electrodes with different state of charge and electrolytes. It is possible to reduce heat generation not only by reducing the amount of lithiation but also with the incorporation of oxygen matrix in the material. Moreover, the existence of robust F-containing species on the electrode surface with the addition of fluoroethylene carbonate (FEC) into the electrolyte reduces reaction between electrolyte and active material, leading to lower heat generation. Though, larger amount of FEC results in more heat as FEC is more exothermic than ethylene carbonate. Better thermal stability of Si and SiO is achievable by optimizing the FEC content in the electrolyte.
- 1 June 2019
- Published by Elsevier in Materials Today Energy
- Vol. 12, 297-302
Polyimide capping layer on improving electrochemical stability of silicon thin-film for Li-ion batteries
- 1 June 2019
- Published by Elsevier in Materials Today Energy
- Vol. 12, 297-302
Polyimide capping layer on improving electrochemical stability of silicon thin-film for Li-ion batteries
- Open Access
- 20 December 2018
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (3) , A5210-A5214
Probing the Reversibility of Silicon Monoxide Electrodes for Lithium-Ion Batteries
Silicon monoxide is a potential high-capacity anode material for lithium-ion batteries. However, its low initial Coulombic efficiency hinders its adoption in commercial batteries. Here, we use an electrochemical approach, depth of discharge test, to study the origin of the irreversibility in SiO electrodes. We find two contributions to the irreversible capacity of SiO, depending on the reaction products during lithiation. Carbon-coating the material improves the reversible capacity as it increases its electrical conductivity. Disproportionation is an effective way to decrease irreversibility in the initial cycle with the formation of large cluster of SiO2 which is electrochemically inactive. Though, the reversible capacity is reduced.
- 20 December 2018
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (3) , A5210-A5214
Open AccessProbing the Reversibility of Silicon Monoxide Electrodes for Lithium-Ion Batteries
Silicon monoxide is a potential high-capacity anode material for lithium-ion batteries. However, its low initial Coulombic efficiency hinders its adoption in commercial batteries. Here, we use an electrochemical approach, depth of discharge test, to study the origin of the irreversibility in SiO electrodes. We find two contributions to the irreversible capacity of SiO, depending on the reaction products during lithiation. Carbon-coating the material improves the reversible capacity as it increases its electrical conductivity. Disproportionation is an effective way to decrease irreversibility in the initial cycle with the formation of large cluster of SiO2 which is electrochemically inactive. Though, the reversible capacity is reduced.
- 14 September 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (40) , 34132-34139
Robust Micron-Sized Silicon Secondary Particles Anchored by Polyimide as High-Capacity, High-Stability Li-Ion Battery Anode
Silicon is an attractive high-capacity anode material for lithium-ion battery. With the help of nanostructures, cycling performance of silicon anode has improved significantly in the past couple of years. However, three major shortcomings associated with nanostructures still need to be addressed, namely, their high surface area, low tap density, and poor scalability. Herein, we present a facile and practical method to produce micron-sized Si secondary particle cluster (SiSPC) with a high tap density and a low surface area from bulk Si by high-energy ball-milling. By coupling SiSPC with a mechanically robust polyimide binder, more than 95% of the initial capacity is retained after 500 cycles at 3500 mA g–1 (1C rate). Reversibility of electrode thickness change is confirmed by in situ dilatometry. In addition, the polyimide binder suppresses the surface reaction of the particles with electrolyte, resulting in a high Coulombic efficiency of 99.7%. Excellent cycling performance is obtained even for thick electrodes with an areal capacity of 3.57 mAh cm–2, similar to those in commercial lithium-ion batteries. The presented Si electrode system has a high volumetric capacity of 598 mAh cm–3, which is higher than that of the commercial graphite anode materials.
- 14 September 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (40) , 34132-34139
Robust Micron-Sized Silicon Secondary Particles Anchored by Polyimide as High-Capacity, High-Stability Li-Ion Battery Anode
Silicon is an attractive high-capacity anode material for lithium-ion battery. With the help of nanostructures, cycling performance of silicon anode has improved significantly in the past couple of years. However, three major shortcomings associated with nanostructures still need to be addressed, namely, their high surface area, low tap density, and poor scalability. Herein, we present a facile and practical method to produce micron-sized Si secondary particle cluster (SiSPC) with a high tap density and a low surface area from bulk Si by high-energy ball-milling. By coupling SiSPC with a mechanically robust polyimide binder, more than 95% of the initial capacity is retained after 500 cycles at 3500 mA g–1 (1C rate). Reversibility of electrode thickness change is confirmed by in situ dilatometry. In addition, the polyimide binder suppresses the surface reaction of the particles with electrolyte, resulting in a high Coulombic efficiency of 99.7%. Excellent cycling performance is obtained even for thick electrodes with an areal capacity of 3.57 mAh cm–2, similar to those in commercial lithium-ion batteries. The presented Si electrode system has a high volumetric capacity of 598 mAh cm–3, which is higher than that of the commercial graphite anode materials.