RPRobin R. Petit

Robin R. Petit

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Robin R. Petit has a total of 65 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Chemical-state evolution and phase stability of epitaxial PtCoO 2 thin films probed by XPS, HAXPES, and in situ XRD

    by Kerry Hazeldine, Jean-Philippe Soulié, Robin Petit, Christophe Detavernier, Silvia Armini, Christoph Adelmann

    Epitaxial PtCoO 2 thin films were grown on Al 2 O 3 ( 0001 ) substrates by physical vapor deposition under back-end-of-line compatible conditions, followed by postdeposition annealing to induce crystallization. While annealing-driven structural evolution in delafossite oxides has been reported, the corresponding chemical-state evolution across crystallization and decomposition boundaries remains insufficiently understood. Here, x-ray photoelectron spectroscopy, hard x-ray photoelectron spectroscopy (HAXPES), and x-ray diffraction are combined to track chemical states and phase stability in PtCoO 2 thin films as a function of thermal processing. This multimodal approach resolves the spectroscopic fingerprints of the metallic delafossite phase, unambiguously identifying formal P t 1 + and C o 3 + valence states. Bulk-sensitive HAXPES, reported here for PtCoO 2 , mitigates surface artifacts and enables direct correlation between bulk chemistry and structural order. Annealing at 800 ∘ C yields phase-pure, epitaxial PtCoO 2 , whereas higher temperatures induce decomposition into metallic Pt and cobalt oxide phases, defining a narrow thermal stability window. Highly crystalline films down to 4.5 nm thickness exhibit low in-plane resistivities consistent with the metallic delafossite phase. These results establish a chemically specific framework for assessing phase formation and stability in PtCoO 2 thin films and demonstrate the utility of combined photoelectron spectroscopy and diffraction for complex oxide metals.

  • Composition and Structure Control during Zinc Phosphate Atomic Layer Deposition Supercycles: Mechanistic Origins of Initial Growth Effects

    by Aditya Chalishazar, Arpan Dhara, Sylwia Klejna, Matthias M. Minjauw, Robin R. Petit, Frans Munnik, Eduardo Solano, Kinanti Hantiyana Aliyah, Jorden De Bolle, Arno Depoorter, et al.

    Atomic layer deposition (ALD) supercycles, formed by combining distinct binary ALD cycles in different ratios offer a versatile route to deposit multicomponent materials. However, predictive composition control is often limited by initial growth effects that arise when switching between ALD chemistries. These effects are particularly relevant for the deposition of metal phosphate thin films but remain insufficiently understood. Here, we investigate supercycles combining one zinc oxide (ZnOx: diethylzinc (DEZ)–O2 plasma) and varied (n = 1–5) phosphorus oxide (POy: trimethylphosphate (TMP)–O2 plasma) ALD subcycles to deposit zinc phosphate thin films. The resulting films exhibit tunable morphology and stoichiometry, spanning compositions from P-doped ZnOx over P-rich zinc orthophosphate to Zn-rich zinc metaphosphates as a function of the supercycle definition. The film growth also shows a strong dependence on the supercycle definition and is quenched beyond a critical number of POy subcycles. Experimental data complemented by density functional theory (DFT) demonstrate that the surface reactions of both DEZ and TMP are highly sensitive to the growth surface established by the preceding subcycles, particularly the balance between surface groups that promote facile precursor chemisorption and those which demonstrate only weak interactions with precursors. As the phosphorus content increases, the film growth is suppressed by the depletion of sites promoting chemisorption, limiting the achievable stoichiometry control for practical growth rates of the films. These findings highlight how initial growth effects govern supercycle ALD and underscore their importance for achieving controlled synthesis of metal phosphate materials.

  • Photoquenching-by-Photocharging: A Single Process of Failure of Oxygen-Exposed InP/ZnSe Quantum Dots

    by Robin R. Petit, Pieter Schiettecatte, Korneel Molkens, Matthias M. Minjauw, Eder A. Castillo-Ruiz, Hannes Van Avermaet, Luca Giordano, Andreas Werbrouck, Pieter Geiregat, Henk Vrielinck, et al.

    Reliability is an essential aspect of emerging optoelectronic technologies based on colloidal quantum dots (QDs). Even so, the fundamental chemical processes that deteriorate the performance of QD-based devices remain poorly understood. Here, we identify a single process of failure that leads to photoluminescence (PL) quenching of InP-based QDs under continuous illumination in an O2-containing atmosphere. We first demonstrate that a rapid loss of PL efficiency occurs under combined O2/light exposure. While no noticeable changes in chemical composition of the QDs occur, we show by femtosecond transient absorption a direct correlation between the PL quenching and the buildup of a population of charged QDs, in which nonemissive trions are formed after photoexcitation. Using electron paramagnetic resonance, we relate QD charging to the transfer of a photoexcited electron to physisorbed O2, thereby forming superoxide anions. Understanding this single process of failure is critical for enhancing the reliability of devices using InP-based QDs for photoluminescent color conversion and electroluminescent light emission.


  • Open Access

    Ultra-Low Loss and Large Bandwidth Fiber-to-Chip Edge Coupler for Aluminum Oxide Photonic Platform at UV-Visible Wavelengths

    by Chupao Lin, Max Kiewiet, Robin R. Petit, Jolien Dendooven, Nicolas Le Thomas, Christophe Detavernier, Bart Kuyken

    Achieving low-loss coupling between single-mode fibers and photonic integrated circuits plays a crucial role in emerging enabling technologies including quantum information, advanced imaging, and precision metrology. High coupling efficiency in the UV/visible spectrum remains challenging due to the small waveguide dimensions at shorter wavelengths. Here, we present an ultra-low loss edge coupler made of a SiOx/AlOx mode converter. The coupling loss between a standard single-mode fiber and an AlOx waveguide below 0.31 dB and 0.62 dB is experimentally demonstrated at a working wavelength of 375 nm and 405 nm, respectively. The design exhibits a large bandwidth of 110 nm below 2.6-dB loss over the entire operating wavelength range of the single mode fiber, as obtained from the simulation. This coupler not only facilitates low-loss fiber-to-chip coupling but also significantly reduces spurious light scattering, making it particularly valuable for applications in PIC-based far-field advanced microscopy and trapped-ion quantum information systems.


  • Open Access

    Tuning the crystallization temperature of titanium dioxide thin films by incorporating silicon dioxide via supercycle atomic layer deposition

    by Carina Hedrich, Davy Deduytsche, Robin R. Petit, Tobias Krekeler, Jun Peng, Martin Ritter, Jolien Dendooven, Christophe Detavernier, Robert H. Blick, Robert Zierold


  • Atomic Layer Deposition for Stable InP-Based On-Chip Quantum Dot microLEDs: Hybrid Quantum Dot Pockets

    by Robin R. Petit, Resul Ozdemir, Hannes Van Avermaet, Luca Giordano, Jakob Kuhs, Andreas Werbrouck, Matthias Filez, Jolien Dendooven, Zeger Hens, Philippe F. Smet, et al.

    Recent advances in synthesis techniques yield InP-based QDs with optical properties comparable to those of benchmark Cd-based QDs, making InP-based QDs viable alternatives to toxic Cd-based QDs for applications such as quantum dot LEDs (QLEDs). However, QLEDs typically suffer from a loss of luminescence over time due to exposure of the QDs to ambient air. To avoid this, state-of-the-art hybrid barrier layers are explored consisting of alternating organic/inorganic layers. In this study, InP-based QD thin films and InP-based QDs embedded in Kraton polymers are encapsulated with a thin metal oxide barrier layer by atomic layer deposition (ALD). Specifically, Al2O3, TiO2, and ZnO thin films are deposited using trimethylaluminum (TMA), tetrakis(dimethylamino)titanium (TDMAT), and diethylzinc (DEZ), with H2O as the reactant. In situ photoluminescence (PL) is used to evaluate the optical response of the InP-based QDs during the ALD coating. The results show that ALD on pristine QD thin films causes degradation of luminescence, while this is not observed for polymer-embedded QDs. The long-term stability of the (ALD-coated) samples is investigated by accelerated degradation in a humidity chamber at a high temperature. Using a single Al2O3 ALD thin film as a capping layer for polymer-embedded QDs, greater stability of the QD-PL over a period of at least 300 h is found compared to pristine QD samples. A similar study is performed with InP-based QDs embedded in UV-patterned polymer (thiol-ene) structures, the so-called QD pockets, envisioned for use in on-chip quantum dot microLEDs. These QD pockets are purposefully designed for pick-and-place operations to reduce the complexity of the on-chip quantum dot microLED manufacturing process. The PL stability was significantly improved after incorporating Al2O3 ALD thin films, with these hybrid QD pockets showing no clear signs of degradation after 140 h. The combination of polymer embedding and ALD with the merits and scalability of the QD pocket structure is demonstrated to be an effective approach to improving the long-term QD stability and shows promise for the development of stable, InP-based on-chip quantum dot microLEDs.


  • Open Access

    Integrated PbS Colloidal Quantum Dot Photodiodes on Silicon Nitride Waveguides

    by Chao Pang, Yu-Hao Deng, Ezat Kheradmand, Nithin Poonkottil, Robin Petit, Lukas Elsinger, Christophe Detavernier, Pieter Geiregat, Zeger Hens, Dries Van Thourhout

    Colloidal quantum dots (QDs) have become a versatile optoelectronic material for emitting and detecting light that can overcome the limitations of a range of electronic and photonic technology platforms. Photonic integrated circuits (PICs), for example, face the persistent challenge of combining active materials with passive circuitry ideally suited for guiding light. Here, we demonstrate the integration of photodiodes (PDs) based on PbS QDs on silicon nitride waveguides (WG). Analyzing planar QDPDs first, we argue that the main limitation WG-coupled QDPDs face is detector saturation induced by the high optical power density of the guided light. Using the cladding thickness and waveguide width as design parameters, we mitigate this issue, and we demonstrate WG-QDPDs with an external quantum efficiency of 67.5% at 1275 nm that exhibit a linear photoresponse for input powers up to 400 nW. In the next step, we demonstrate a compact infrared spectrometer by integrating these WG-QDPDs on the output channels of an arrayed waveguide grating demultiplexer. This work provides a path toward a low-cost PD solution for PICs, which are attractive for large-scale production.


  • Depositing ALD-oxides on MLD-metalcones: enhancing initial growth through O2 plasma densification

    by Juan Santo Domingo Peñaranda, Matthias M. Minjauw, Sofie S. T. Vandenbroucke, Robin Petit, Jin Li, Jolien Dendooven, Christophe Detavernier

    The world of flexible devices has brought the interest to combine ALD and MLD films. However, direct ALD on MLD can suffer from stability/growth issues. Utilising O2 plasma, their compatibility can be enhanced, providing a more effective stacking.


  • An IR Spectroscopy Study of the Degradation of Surface Bound Azido-Groups in High Vacuum

    by Sofie S. T. Vandenbroucke, Mikko Nisula, Robin Petit, Rita Vos, Karolien Jans, Philippe M. Vereecken, Jolien Dendooven, Christophe Detavernier

    Controlled surface functionalization with azides to perform on surface “click chemistry” is desired for a large range of fields such as material engineering and biosensors. In this work, the stability of an azido-containing self-assembled monolayer in high vacuum is investigated using in situ Fourier transform infrared spectroscopy. The intensity of the antisymmetric azide stretching vibration is found to decrease over time, suggesting the degradation of the azido-group in high vacuum. The degradation is further investigated at three different temperatures and at seven different nitrogen pressures ranging from 1 × 10–6 mbar to 5 × 10–3 mbar. The degradation is found to increase at higher temperatures and at lower nitrogen pressures. The latter supporting the theory that the degradation reaction involves the decomposition into molecular nitrogen. For the condition with the highest degradation detected, only 63% of azides is found to remain at the surface after 8 h in vacuum. The findings show a significant loss in control of the surface functionalization. The instability of azides in high vacuum should therefore always be considered when depositing or postprocessing azido-containing layers.


  • Atomic Layer Deposition on Polymer Thin Films: On the Role of Precursor Infiltration and Reactivity

    by Robin R. Petit, Jin Li, Babs Van de Voorde, Sandra Van Vlierberghe, Philippe F. Smet, Christophe Detavernier

    Inorganic barriers grown by atomic layer deposition (ALD) can overcome the stability issues originating from the permeation of foreign species (water and oxygen) into polymer thin films. Alternatively, infiltration of ALD species into the bulk of the polymer can be used to modify its characteristic properties. In this study, the feasibility of growing an inorganic barrier with ALD on polystyrene, poly(methyl methacrylate), and poly(ethylene terephthalate glycol) thin films is evaluated. The nucleation and growth of the ALD layer, including the infiltration into the polymer thin film, are monitored in situ using spectroscopic ellipsometry, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy for Al2O3-ALD with trimethylaluminum as the Al precursor and H2O as the reactant. The results show that the deposition temperature and the presence and location of functional groups in the polymer chain exert the strongest influence on the infiltration behavior and as such allow us to manipulate (i.e. to prevent or expedite) the infiltration into the polymer thin film.