Beat Weiss
Beat Weiss has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Burkhard Ringlein
IBM Research Europe, Rschlikon, Switzerland
2 shared publications - Christoph Hagleitner
IBM Research Europe, Rschlikon, Switzerland
2 shared publications Clemens Lombriser
2 shared publications- Dietmar Fey
Friedrich-Alexander-Universität Erlangen-Nürnberg
2 shared publications - Francois Abel
IBM Research Europe, Rschlikon, Switzerland
2 shared publications Hong Linh Truong
2 shared publications
Latest Publications
- Open Access
- 8 January 2025
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Storage
- Vol. 21 (1) , 1-70
Magnetic Tape Storage Technology
Magnetic tape provides a cost-effective way to retain the exponentially increasing volumes of data being created in recent years. The low cost per terabyte combined with tape’s low energy consumption make it an appealing option for storing infrequently accessed data and has resulted in a resurgence in use of the technology. Magnetic tape as a digital data storage technology was first commercialized in the early 1950’s and has evolved continuously since then. Despite its long history, tape has significant potential for continued capacity and data rate scaling. This article strives to provide an overview of linear magnetic tape technology, usage, history, and future outlook. After a short introduction, the article delves into the details of how modern tape drives and media operate, including the basic mechanism and physics of magnetic recording, current tape media technology, state-of-the-art tape head technology, tape layout and encoding, data retrieval, timing-based servo and mechatronics of a tape drive, and the capabilities of current drives. This is followed by a discussion of tape libraries, an overview of tape library performance modeling research, operating system-level and application-level tape support, tape use cases, and the future scaling potential and outlook of tape. The article concludes with a history of tape hardware, media, usage and software.
- 8 January 2025
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Storage
- Vol. 21 (1) , 1-70
Open AccessMagnetic Tape Storage Technology
Magnetic tape provides a cost-effective way to retain the exponentially increasing volumes of data being created in recent years. The low cost per terabyte combined with tape’s low energy consumption make it an appealing option for storing infrequently accessed data and has resulted in a resurgence in use of the technology. Magnetic tape as a digital data storage technology was first commercialized in the early 1950’s and has evolved continuously since then. Despite its long history, tape has significant potential for continued capacity and data rate scaling. This article strives to provide an overview of linear magnetic tape technology, usage, history, and future outlook. After a short introduction, the article delves into the details of how modern tape drives and media operate, including the basic mechanism and physics of magnetic recording, current tape media technology, state-of-the-art tape head technology, tape layout and encoding, data retrieval, timing-based servo and mechatronics of a tape drive, and the capabilities of current drives. This is followed by a discussion of tape libraries, an overview of tape library performance modeling research, operating system-level and application-level tape support, tape use cases, and the future scaling potential and outlook of tape. The article concludes with a history of tape hardware, media, usage and software.
- 13 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Computer Architecture Letters
- Vol. 22 (1) , 9-12
Advancing Compilation of DNNs for FPGAs Using Operation Set Architectures
The slow-down of technology scaling combined with the exponential growth of modern machine learning and artificial intelligence models has created a demand for specialized accelerators, such as GPUs, ASICs, and field-programmable gate arrays (FPGAs). FPGAs can be reconfigured and have the potential to outperform other accelerators, while also being more energy-efficient, but are cumbersome to use with today's fractured landscape of tool flows. We propose the concept of an operation set architecture to overcome the current incompatibilities and hurdles in using DNN-to-FPGA compilers by combining existing specialized frameworks into one organic compiler that also allows the efficient and automatic re-use of existing community tools. Furthermore, we demonstrate that mixing different existing frameworks can increase the efficiency by more than an order of magnitude.
- 13 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Computer Architecture Letters
- Vol. 22 (1) , 9-12
Advancing Compilation of DNNs for FPGAs Using Operation Set Architectures
The slow-down of technology scaling combined with the exponential growth of modern machine learning and artificial intelligence models has created a demand for specialized accelerators, such as GPUs, ASICs, and field-programmable gate arrays (FPGAs). FPGAs can be reconfigured and have the potential to outperform other accelerators, while also being more energy-efficient, but are cumbersome to use with today's fractured landscape of tool flows. We propose the concept of an operation set architecture to overcome the current incompatibilities and hurdles in using DNN-to-FPGA compilers by combining existing specialized frameworks into one organic compiler that also allows the efficient and automatic re-use of existing community tools. Furthermore, we demonstrate that mixing different existing frameworks can increase the efficiency by more than an order of magnitude.
- 1 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-9
Programming Reconfigurable Heterogeneous Computing Clusters Using MPI With Transpilation
With the slowdown of Moore's law and the stop of Dennard scaling, energy efficiency of compute hardware translates to compute power. Therefore, High-Performance Computing (HPC) systems tend to rely more and more on accelerators such as Field-Programmable Gate Arrays (FPGAs) to fuel high demanding workloads, like Big Data applications or Deep Neuronal Networks. These FPGAs are reconfigurable and sometimes no longer bus-attached to a CPU but directly connected to the data center network fabric as standalone nodes. This mix of CPUs and FPGAs leads to the creation of Reconfigurable Heterogeneous HPC (ReH 2 PC) clusters for which no established programming model exists, despite many proposals in the past. In contrast to this, the Message Passing Interface (MPI) has evolved as the de-facto standard to program classical HPC clusters, due to its high-re-usability and fast development of applications. This paper revisits the programming model of ReH2PC clusters and argues that MPI is suitable for program-ming heterogeneous clusters of FPGAs and CPUs. Our experiments with 31 FPGAs show an average speedup of 4 and a 90% reduction of power consumption compared to a cluster of CPUs. We demonstrate a one-click solution for compiling and deploying a standard MPI application on ReH2PC clusters. Our framework implements a High-Level Synthesis (HLS) library, a specific run-time environment for FPGAs and CPUs, and a transpiler that closes the semantic gap between the MPI API and FPGA designs. Our experiments with 31 FPGAs show an average speedup of 4 and a 90% reduction of power consumption compared to a cluster of CPUs.
- 1 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-9
Programming Reconfigurable Heterogeneous Computing Clusters Using MPI With Transpilation
With the slowdown of Moore's law and the stop of Dennard scaling, energy efficiency of compute hardware translates to compute power. Therefore, High-Performance Computing (HPC) systems tend to rely more and more on accelerators such as Field-Programmable Gate Arrays (FPGAs) to fuel high demanding workloads, like Big Data applications or Deep Neuronal Networks. These FPGAs are reconfigurable and sometimes no longer bus-attached to a CPU but directly connected to the data center network fabric as standalone nodes. This mix of CPUs and FPGAs leads to the creation of Reconfigurable Heterogeneous HPC (ReH 2 PC) clusters for which no established programming model exists, despite many proposals in the past. In contrast to this, the Message Passing Interface (MPI) has evolved as the de-facto standard to program classical HPC clusters, due to its high-re-usability and fast development of applications. This paper revisits the programming model of ReH2PC clusters and argues that MPI is suitable for program-ming heterogeneous clusters of FPGAs and CPUs. Our experiments with 31 FPGAs show an average speedup of 4 and a 90% reduction of power consumption compared to a cluster of CPUs. We demonstrate a one-click solution for compiling and deploying a standard MPI application on ReH2PC clusters. Our framework implements a High-Level Synthesis (HLS) library, a specific run-time environment for FPGAs and CPUs, and a transpiler that closes the semantic gap between the MPI API and FPGA designs. Our experiments with 31 FPGAs show an average speedup of 4 and a 90% reduction of power consumption compared to a cluster of CPUs.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 29-32
An FPGA Platform for Hyperscalers
FPGAs (Field Programmable Gate Arrays) are making their way into data centers (DC). They are used as accelerators to boost the compute power of individual server nodes and to improve the overall power efficiency. Meanwhile, DC infrastructures are being redesigned to pack ever more compute capacity into the same volume and power envelopes. This redesign leads to the disaggregation of the server and its resources into a collection of standalone computing, memory, and storage modules.To embrace this evolution, we developed a platform that decouples the FPGA from the CPU of the server by connecting the FPGA directly to the DC network. This proposal turns the FPGA into a disaggregated standalone computing resource that can be deployed at large scale into emerging hyperscale data centers.This paper describes an infrastructure which integrates 64 FPGAs (Kintex* UltraScale* XCKU060) from Xilinx* in a 19" × 2U chassis, and provides a bi-sectional bandwidth of 640 Gb/s. The platform is designed for cost effectiveness and makes use of hot-water cooling for optimized energy efficiency. As a result, a DC rack can fit 16 platforms, for a total of 1024 FPGAs + 16 TB of DRR4 memory.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 29-32
An FPGA Platform for Hyperscalers
FPGAs (Field Programmable Gate Arrays) are making their way into data centers (DC). They are used as accelerators to boost the compute power of individual server nodes and to improve the overall power efficiency. Meanwhile, DC infrastructures are being redesigned to pack ever more compute capacity into the same volume and power envelopes. This redesign leads to the disaggregation of the server and its resources into a collection of standalone computing, memory, and storage modules.To embrace this evolution, we developed a platform that decouples the FPGA from the CPU of the server by connecting the FPGA directly to the DC network. This proposal turns the FPGA into a disaggregated standalone computing resource that can be deployed at large scale into emerging hyperscale data centers.This paper describes an infrastructure which integrates 64 FPGAs (Kintex* UltraScale* XCKU060) from Xilinx* in a 19" × 2U chassis, and provides a bi-sectional bandwidth of 640 Gb/s. The platform is designed for cost effectiveness and makes use of hot-water cooling for optimized energy efficiency. As a result, a DC rack can fit 16 platforms, for a total of 1024 FPGAs + 16 TB of DRR4 memory.
- 1 April 2013
- Published by Elsevier in Computer Networks
- Vol. 57 (6) , 1425-1442
A case for centrally controlled wireless sensor networks
- 1 April 2013
- Published by Elsevier in Computer Networks
- Vol. 57 (6) , 1425-1442
A case for centrally controlled wireless sensor networks
- 1 January 2012
- Published by Springer Nature
- p. 235-248
Wireless Sensor Network for Continuous Temperature Monitoring in Air-Cooled Data Centers: Applications and Measurement Results
- 1 January 2012
- Published by Springer Nature
- p. 235-248
Wireless Sensor Network for Continuous Temperature Monitoring in Air-Cooled Data Centers: Applications and Measurement Results
- 1 June 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21555486,p. 37-45
A power-efficient wireless sensor network for continuously monitoring seismic vibrations
We present a novel power-efficient wireless sensor network for continuously monitoring and analyzing seismic vibrations with sensor nodes and forwarding the retrieved information with low-cost relay nodes to backend applications. The applied vibration sensing algorithms are derived from the DIN 4150-3 standard. All nodes in the network are battery-powered and equipped with an IEEE 802.15.4 compatible radio transceiver. The nodes communicate with each other by executing a novel power-efficient protocol stack, which provides all network functions required by the vibration-sensing application and uses a publish/subscribe messaging protocol for communicating between the network nodes and the backend applications. Results obtained in certification and field tests show that the proposed vibration-sensing solution is standard-compliant, and that the wireless vibration sensor network (WVSN) exhibits excellent performance in terms of packet delivery rate, latency, and power efficiency.
- 1 June 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21555486,p. 37-45
A power-efficient wireless sensor network for continuously monitoring seismic vibrations
We present a novel power-efficient wireless sensor network for continuously monitoring and analyzing seismic vibrations with sensor nodes and forwarding the retrieved information with low-cost relay nodes to backend applications. The applied vibration sensing algorithms are derived from the DIN 4150-3 standard. All nodes in the network are battery-powered and equipped with an IEEE 802.15.4 compatible radio transceiver. The nodes communicate with each other by executing a novel power-efficient protocol stack, which provides all network functions required by the vibration-sensing application and uses a publish/subscribe messaging protocol for communicating between the network nodes and the backend applications. Results obtained in certification and field tests show that the proposed vibration-sensing solution is standard-compliant, and that the wireless vibration sensor network (WVSN) exhibits excellent performance in terms of packet delivery rate, latency, and power efficiency.
- 14 March 2008
- Published by Springer Nature
- p. 325-340
Indoor Location Tracking Using Inertial Navigation Sensors and Radio Beacons
- 14 March 2008
- Published by Springer Nature
- p. 325-340
Indoor Location Tracking Using Inertial Navigation Sensors and Radio Beacons
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5 pp.-46
The IBM wireless sensor networking testbed
This paper describes the wireless sensor networking testbed built at the IBM Zurich Research Laboratory. The testbed has been used to address a wealth of exciting research challenges. Performance evaluations have been carried out with short-range wireless communication technologies, which are highly relevant for sensor networking such as IEEE 802.15.4/ZigBee networks, Bluetooth WPANs, and IEEE 802.11b WLANs. With the testbed, the merits of wireless mesh networking for range extension and reliability enhancement have been explored. New light-weight messaging protocols for communication between sensors and an application server have been tested which allow to bring messaging-oriented middleware down to very low-end sensors and actuators. In addition, the testbed has been used to develop sensor applications for remote metering and location-sensing
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5 pp.-46
The IBM wireless sensor networking testbed
This paper describes the wireless sensor networking testbed built at the IBM Zurich Research Laboratory. The testbed has been used to address a wealth of exciting research challenges. Performance evaluations have been carried out with short-range wireless communication technologies, which are highly relevant for sensor networking such as IEEE 802.15.4/ZigBee networks, Bluetooth WPANs, and IEEE 802.11b WLANs. With the testbed, the merits of wireless mesh networking for range extension and reliability enhancement have been explored. New light-weight messaging protocols for communication between sensors and an application server have been tested which allow to bring messaging-oriented middleware down to very low-end sensors and actuators. In addition, the testbed has been used to develop sensor applications for remote metering and location-sensing