Zainab Ahmed Alkaissi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zainab Ahmed Alkaissi has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Abbas Mohammed
Highway and Transportation Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq
1 shared publication- Alaa Saadi Abbas
Highway and Transportation Engineering Department, Mustansiriyah University, Baghdad, Iraq
1 shared publication - Hanan Adnan Hassan
Highway and Transportation Engineering Department, Mustansiriyah University, Baghdad, Iraq
1 shared publication Hassan Adnan
Highway and Transportation Department, College of Engineering, Mustansiriyah University, Iraq
1 shared publicationJleel H. Rasheed
Highway and Transportation Engineering Department, Mustansiriyah University, Baghdad, Iraq
1 shared publicationKammelah Ahmed Al-Kaissi
Architecture Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq
1 shared publication
Latest Publications
- Open Access
- 1 July 2026
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 30 (4) , 533-540
Parking Characteristics and Assessing the Use of Rotary Smart Parking: A Case Study
The increasing use of private cars in urban areas, driven by a rapidly growing economy and abandoned policies and allocations, is the main reason for the growth of parking lots. They are among the main concerns in transport and traffic management worldwide. Parking allocation also considers implementing rotary smart parking to enhance parking efficiency. Using rotary smart parking is expected to alleviate traffic congestion near the study area while optimizing parking bay capacity. The car park is in the Bab Al-Moatham area, a central station located north of Baghdad’s center, adjacent to the College of Engineering, Mustansiriyah University. The results revealed that maximum parking accumulation typically occurs between 10:00 a.m. and 12:00 p.m., with a peak of 200 vehicles at 10:30 a.m., leading to a parking capacity utilization of 90.5%, a total parking load of 602.75 vehicle-hours, and an average duration of 3 hrs. High occupancy levels, negatively impacting traffic performance in the parking area, were observed from 10:00-10:15 a.m., reaching 73.58. In conclusion, using rotary smart parking will require fewer spaces, potentially reducing space requirements by approximately 20%.
- 1 July 2026
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 30 (4) , 533-540
Open AccessParking Characteristics and Assessing the Use of Rotary Smart Parking: A Case Study
The increasing use of private cars in urban areas, driven by a rapidly growing economy and abandoned policies and allocations, is the main reason for the growth of parking lots. They are among the main concerns in transport and traffic management worldwide. Parking allocation also considers implementing rotary smart parking to enhance parking efficiency. Using rotary smart parking is expected to alleviate traffic congestion near the study area while optimizing parking bay capacity. The car park is in the Bab Al-Moatham area, a central station located north of Baghdad’s center, adjacent to the College of Engineering, Mustansiriyah University. The results revealed that maximum parking accumulation typically occurs between 10:00 a.m. and 12:00 p.m., with a peak of 200 vehicles at 10:30 a.m., leading to a parking capacity utilization of 90.5%, a total parking load of 602.75 vehicle-hours, and an average duration of 3 hrs. High occupancy levels, negatively impacting traffic performance in the parking area, were observed from 10:00-10:15 a.m., reaching 73.58. In conclusion, using rotary smart parking will require fewer spaces, potentially reducing space requirements by approximately 20%.
- Open Access
- 1 June 2026
- Published by Springer Nature in Journal of King Saud University – Engineering Sciences
- Vol. 38 (5) , 40
Assessing urban public transport service performance using SERVPERF and Structural Equation Modeling
Urban public transport is a key component of sustainable mobility in developing cities, where ownership and use of individual motorized vehicles continues to increase, while congestion raises concerns about accessibility and environmental impacts. A key challenge in delivering better services is understanding the nature of service prformance characteristics and their roles in influencing user satisfaction, thereby improving operational efficiency and system effectiveness. However, there is a shortage of empirical research integrating performance-based SERVPERF with Structural Equation Modeling (SEM) to understand service performance influences passenger satisfaction and future usage intention in irregular, resource constrained bus and minibus service systems, especially in Middle Eastern cities. This study uses a performance-only SERVPERF framework integrated with Structural Equation Modeling (SEM) to test the relationships between perceived service quality, user satisfaction, and future use intention for the bus and minibus systems of Baghdad City. Six underlying service dimensions were conceptualized: comfort, perceived time adherence, safety & security, operations & availability, accessibility, and fare and affordability. Due to limited discriminative power of fare affordability, a conclusion based on 550 valid survey responses, it was excluded from the final model. The structural model demonstrated good fit (CFI = 0.961, RMSEA = 0.039) and exhibited moderate-to-substantial explanatory power, accounting for 58.9% of the variance in satisfaction (R² = 0.589) and 36.6% of the variance in behavioral intention (R² = 0.366). Perceived time adherence (β = 0.589, p < 0.001) and operations & availability (β = 0.487, p < 0.001) are the most predictive of passenger satisfaction, compared to other factors. Satisfaction acts as the central mechanism linking service performance to behavioral intention. Model comparison supported retaining a full mediation structure at the global level, while path-level results revealed a mixed mediation pattern, with partial mediation for Time Adherence, full mediation for Operations & Availability, and no mediation effects for Comfort, Safety, and Accessibility. The findings imply that, in informal and resource-constrained transit systems such as Baghdad City operational reliability and service availability should be prioritized through basic operational standards and performance monitoring such as headway stability, vehicle availability, and actual waiting time to achieve the largest gains in satisfaction and sustained public transport use. Conclusively, the validated SERVPERF–SEM framework provides a robust and transferable tool for engineering-oriented performance assessment and operational improvement of public transport systems in resource-scarce developing cities.
- 1 June 2026
- Published by Springer Nature in Journal of King Saud University – Engineering Sciences
- Vol. 38 (5) , 40
Open AccessAssessing urban public transport service performance using SERVPERF and Structural Equation Modeling
Urban public transport is a key component of sustainable mobility in developing cities, where ownership and use of individual motorized vehicles continues to increase, while congestion raises concerns about accessibility and environmental impacts. A key challenge in delivering better services is understanding the nature of service prformance characteristics and their roles in influencing user satisfaction, thereby improving operational efficiency and system effectiveness. However, there is a shortage of empirical research integrating performance-based SERVPERF with Structural Equation Modeling (SEM) to understand service performance influences passenger satisfaction and future usage intention in irregular, resource constrained bus and minibus service systems, especially in Middle Eastern cities. This study uses a performance-only SERVPERF framework integrated with Structural Equation Modeling (SEM) to test the relationships between perceived service quality, user satisfaction, and future use intention for the bus and minibus systems of Baghdad City. Six underlying service dimensions were conceptualized: comfort, perceived time adherence, safety & security, operations & availability, accessibility, and fare and affordability. Due to limited discriminative power of fare affordability, a conclusion based on 550 valid survey responses, it was excluded from the final model. The structural model demonstrated good fit (CFI = 0.961, RMSEA = 0.039) and exhibited moderate-to-substantial explanatory power, accounting for 58.9% of the variance in satisfaction (R² = 0.589) and 36.6% of the variance in behavioral intention (R² = 0.366). Perceived time adherence (β = 0.589, p < 0.001) and operations & availability (β = 0.487, p < 0.001) are the most predictive of passenger satisfaction, compared to other factors. Satisfaction acts as the central mechanism linking service performance to behavioral intention. Model comparison supported retaining a full mediation structure at the global level, while path-level results revealed a mixed mediation pattern, with partial mediation for Time Adherence, full mediation for Operations & Availability, and no mediation effects for Comfort, Safety, and Accessibility. The findings imply that, in informal and resource-constrained transit systems such as Baghdad City operational reliability and service availability should be prioritized through basic operational standards and performance monitoring such as headway stability, vehicle availability, and actual waiting time to achieve the largest gains in satisfaction and sustained public transport use. Conclusively, the validated SERVPERF–SEM framework provides a robust and transferable tool for engineering-oriented performance assessment and operational improvement of public transport systems in resource-scarce developing cities.
- Open Access
- 5 March 2026
- Published by MDPI AG in Preprints.org
A Review on Investigating the Opportunities and Challenges of Implementing Transport-Oriented Development (Tod) in Urban City
The city of Baghdad is witnessing a continuous increase in traffic and urbanization, which has led to frequent traffic jams and deterioration of the urban environment and quality of life due to pollution and the waste of time and energy. Hence, it has become necessary to adopt integrated planning concepts that regulate land uses, promote transport efficiency, and support sustainable urban development. This research aims to investigate the concept of transport-oriented development (TOD) and explore its applicability in the city of Baghdad, focusing on identifying obstacles and challenges that may face the implementation of this concept in the local context, whether related to transport infrastructure, urban planning, or community participation, to provide an analytical framework that can be relied upon in the development of effective strategies to promote sustainable transport and integrated urban development. The BRT bus rapid transit system is an essential part of the Comprehensive Development Plan for Baghdad 2030, aiming to improve mass transit and reduce congestion on major streets such as Palestine Street by providing fast, efficient transportation that connects the city's neighborhoods and encourages walking and the use of sustainable transport. The project supports sustainable urban development by integrating the principles of TOD, increasing residential and commercial density around the stations, and adopting an integrative methodology that analyzes the relationships among transport, land uses, and urban density to provide a scientific framework to support planning and future decision-making.
- 5 March 2026
- Published by MDPI AG in Preprints.org
Open AccessA Review on Investigating the Opportunities and Challenges of Implementing Transport-Oriented Development (Tod) in Urban City
The city of Baghdad is witnessing a continuous increase in traffic and urbanization, which has led to frequent traffic jams and deterioration of the urban environment and quality of life due to pollution and the waste of time and energy. Hence, it has become necessary to adopt integrated planning concepts that regulate land uses, promote transport efficiency, and support sustainable urban development. This research aims to investigate the concept of transport-oriented development (TOD) and explore its applicability in the city of Baghdad, focusing on identifying obstacles and challenges that may face the implementation of this concept in the local context, whether related to transport infrastructure, urban planning, or community participation, to provide an analytical framework that can be relied upon in the development of effective strategies to promote sustainable transport and integrated urban development. The BRT bus rapid transit system is an essential part of the Comprehensive Development Plan for Baghdad 2030, aiming to improve mass transit and reduce congestion on major streets such as Palestine Street by providing fast, efficient transportation that connects the city's neighborhoods and encourages walking and the use of sustainable transport. The project supports sustainable urban development by integrating the principles of TOD, increasing residential and commercial density around the stations, and adopting an integrative methodology that analyzes the relationships among transport, land uses, and urban density to provide a scientific framework to support planning and future decision-making.
- Open Access
- 1 January 2026
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 30 (1) , 121-126
Spatio-Temporal Analysis of Travel Speed for Urban Streets
ان التحليل المرئي للخصائص المرورية لإيجاد السرعة المرورية في الشوارع الحضرية يساعد مهندسي المروري في إدارة حركة المرور والتوقع السريع لمناطق الزحام المروري. تم إختيار 3 أقسام لطريق رئيسي مع 8 روابط محلية في شارع فلسطين –مدينة بغداد كمنطقة دراسة للتحري عن توزيع معدل سرعة النقل. شبكة الطرق تتضمن المقاطع من تقاطع الموال الى تقاطع النخلة (الوصلة 1) والمقطع من تقاطع النخلة الى تقاطع الصخرة (الوصلة 2) والمقطع من تقاطع الصخرة الى تقاطع بيروت (الوصلة 3). تتراوح فترة الزحام المرورية بين 12-1 مساءا ومن 5-7 مساءا للوصلة 1 وبسرعة تتراوح بين 34 -35 كم/ساعة وتميل الى ان تصبح اكثر زحاما في الوصلة 3 وبسرعة تصل الى 29 كم/ساعة. يعتبر الوصلة 2 منطقة زحام متوسط. إن التوزيع المكاني للزحام المروري في الوصلة 1 و3 حيث يعتبران جزئين من طريق رئيسي وموزع للرحلات المنجذبة والمتولدة في المناطق المحيطة بشارع فلسطين. إن طريقة التحليل المرئي تعتمد على البيانات الحقلية لعكس واقع حال الظروف المرورية وسرعة النقل وتحديد الخصائص المرورية زمانيا ومكانيا حيث تعتبر جزء مكمل لفهم التشغيل المروري.
- 1 January 2026
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 30 (1) , 121-126
Open AccessSpatio-Temporal Analysis of Travel Speed for Urban Streets
ان التحليل المرئي للخصائص المرورية لإيجاد السرعة المرورية في الشوارع الحضرية يساعد مهندسي المروري في إدارة حركة المرور والتوقع السريع لمناطق الزحام المروري. تم إختيار 3 أقسام لطريق رئيسي مع 8 روابط محلية في شارع فلسطين –مدينة بغداد كمنطقة دراسة للتحري عن توزيع معدل سرعة النقل. شبكة الطرق تتضمن المقاطع من تقاطع الموال الى تقاطع النخلة (الوصلة 1) والمقطع من تقاطع النخلة الى تقاطع الصخرة (الوصلة 2) والمقطع من تقاطع الصخرة الى تقاطع بيروت (الوصلة 3). تتراوح فترة الزحام المرورية بين 12-1 مساءا ومن 5-7 مساءا للوصلة 1 وبسرعة تتراوح بين 34 -35 كم/ساعة وتميل الى ان تصبح اكثر زحاما في الوصلة 3 وبسرعة تصل الى 29 كم/ساعة. يعتبر الوصلة 2 منطقة زحام متوسط. إن التوزيع المكاني للزحام المروري في الوصلة 1 و3 حيث يعتبران جزئين من طريق رئيسي وموزع للرحلات المنجذبة والمتولدة في المناطق المحيطة بشارع فلسطين. إن طريقة التحليل المرئي تعتمد على البيانات الحقلية لعكس واقع حال الظروف المرورية وسرعة النقل وتحديد الخصائص المرورية زمانيا ومكانيا حيث تعتبر جزء مكمل لفهم التشغيل المروري.
- Open Access
- 1 November 2024
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 28 (6) , 809-814
Enhancement of Roadway Embankment Using Geofoam Blocks and Cement Columns: Application of Three-Dimensional Plaxis Program
Enhancement of roadway embankment utilizing several techniques, such as cement columns and applying EPS (expanded polystyrene) Geofoam blocks as subbase materials, helps develop the efficiency of embankment performance under the applied traffic loading for local materials. A PLAXIS 3D (ver.20) finite element program is used for the simulation models of roadway embankments. The results showed that applying the cement column reduced the vertical deformation of the roadway embankment to (50mm) corresponding to approximately (58%) of the reference model. The EPS Geofoam blocks highly lowered the vertical deformation to (20mm) about (83%) of the reference model to those in the cement column. The EPS Geofoam blocks provide a convenient solution for improving the roadway embankment with an (83%) reduction in maximum vertical displacement and sustaining traffic loading on the pavement. The reduction in displacement is well done by utilizing the EPS Geofoam blocks in a granular layer of pavement embankment. The EPS Geofoam blocks acted better in reducing vertical stresses (about 22%) higher than the cement column. This benefits the use of EPS Geofoam blocks in the base layer to enhance roadway embankment against failure.
- 1 November 2024
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 28 (6) , 809-814
Open AccessEnhancement of Roadway Embankment Using Geofoam Blocks and Cement Columns: Application of Three-Dimensional Plaxis Program
Enhancement of roadway embankment utilizing several techniques, such as cement columns and applying EPS (expanded polystyrene) Geofoam blocks as subbase materials, helps develop the efficiency of embankment performance under the applied traffic loading for local materials. A PLAXIS 3D (ver.20) finite element program is used for the simulation models of roadway embankments. The results showed that applying the cement column reduced the vertical deformation of the roadway embankment to (50mm) corresponding to approximately (58%) of the reference model. The EPS Geofoam blocks highly lowered the vertical deformation to (20mm) about (83%) of the reference model to those in the cement column. The EPS Geofoam blocks provide a convenient solution for improving the roadway embankment with an (83%) reduction in maximum vertical displacement and sustaining traffic loading on the pavement. The reduction in displacement is well done by utilizing the EPS Geofoam blocks in a granular layer of pavement embankment. The EPS Geofoam blocks acted better in reducing vertical stresses (about 22%) higher than the cement column. This benefits the use of EPS Geofoam blocks in the base layer to enhance roadway embankment against failure.
- Open Access
- 1 July 2024
- Published by Ital Publication in Civil Engineering Journal
- Vol. 10 (7) , 2233-2243
Evaluating the Performance of Right Turn Lanes at Signalized Intersection Using Traffic Simulation Model
The issue of traffic congestion at signalized intersections is a concern in transportation systems due to the growth of urban areas and increased vehicular transportation. To study the evolution of congestion and evaluate the traffic performance operation of signalized intersections under problematic congested and improved conditions, the microscopic simulation VISSIM software is utilized. The objectives of this paper are to evaluate operational techniques, build a simulation model, and produce a well-calibrated and validated model. The methodology procedure to evaluate the signalized intersection involves the application of a traffic simulation model to observe real-time delays and stopped vehicles. Using the VISSIM software Version 9 to create an intersection model and redesign geometry with an exclusive right turn to enhance the intersection functionality and reduce delay. Our research focused on the Al-Nakhala signalized intersection located in the southern part of Palestine urban street in Baghdad city. This intersection is one of the busiest along the corridor due to significant land-use changes in the study area, including residential, educational, or commercial areas generating daily pressure from additional trips and saturating the absorptive capacity of the intersections. The proposed scenario of an exclusive right–turn could reduce the queue length and vehicle delay at the signalized intersection, resulting in a more efficient traffic operation. As a result of the reduction in vehicle delay, the Level of service (LOS) for the north, west, and east approaches improved from F to D. However, there was only a slight improvement for the south approach, with the LOS changing from E to F. Nonetheless, there was a noticeable reduction in queue length and vehicle delay ranging from 25% to 50%. Doi: 10.28991/CEJ-2024-010-07-010 Full Text: PDF
- 1 July 2024
- Published by Ital Publication in Civil Engineering Journal
- Vol. 10 (7) , 2233-2243
Open AccessEvaluating the Performance of Right Turn Lanes at Signalized Intersection Using Traffic Simulation Model
The issue of traffic congestion at signalized intersections is a concern in transportation systems due to the growth of urban areas and increased vehicular transportation. To study the evolution of congestion and evaluate the traffic performance operation of signalized intersections under problematic congested and improved conditions, the microscopic simulation VISSIM software is utilized. The objectives of this paper are to evaluate operational techniques, build a simulation model, and produce a well-calibrated and validated model. The methodology procedure to evaluate the signalized intersection involves the application of a traffic simulation model to observe real-time delays and stopped vehicles. Using the VISSIM software Version 9 to create an intersection model and redesign geometry with an exclusive right turn to enhance the intersection functionality and reduce delay. Our research focused on the Al-Nakhala signalized intersection located in the southern part of Palestine urban street in Baghdad city. This intersection is one of the busiest along the corridor due to significant land-use changes in the study area, including residential, educational, or commercial areas generating daily pressure from additional trips and saturating the absorptive capacity of the intersections. The proposed scenario of an exclusive right–turn could reduce the queue length and vehicle delay at the signalized intersection, resulting in a more efficient traffic operation. As a result of the reduction in vehicle delay, the Level of service (LOS) for the north, west, and east approaches improved from F to D. However, there was only a slight improvement for the south approach, with the LOS changing from E to F. Nonetheless, there was a noticeable reduction in queue length and vehicle delay ranging from 25% to 50%. Doi: 10.28991/CEJ-2024-010-07-010 Full Text: PDF
- Open Access
- 1 July 2024
- Published by Journal of Engineering in Journal of Engineering
- Vol. 30 (07) , 202-217
Analysis the Reliability of Travel Time in Urban Corridors in Baghdad City
Travel-time reliability is a crucial performance measure for transportation systems. This research aims to estimate travel time and predict delay time on three routes in Baghdad city using GPS devices: Safi Al-Den Street, Palestine Street, and the Army Channel Expressway. The study was conducted northward from 7:00 a.m. to 9:00 p.m. Reliability indices for the first and second routes with signalized intersections, including buffer index, travel time index, and 95th percentile travel time, were determined. Safi Al-Den Street's buffer time index for links 1 to 3 is approximately 44.75%, 39.87%, and 39.12%, respectively. The highest travel time index value is observed in link 3 at 8.9%. Link 1 has the longest 95% travel time at 659 seconds. Palestine Street shows a high buffer time index in links 1 and 3 at around 32.39% and 24.65%, respectively. The highest travel time index is in link 3 at 6.84%, attributed to congestion from increased educational, medical, and commercial trips. The longest 95% travel time is 430 seconds in link 7. This study offers valuable insights into the reliability of travel time in urban corridors in Baghdad city, aiding transportation planners and engineers in making informed decisions on traffic management, infrastructure development, and policy-making.
- 1 July 2024
- Published by Journal of Engineering in Journal of Engineering
- Vol. 30 (07) , 202-217
Open AccessAnalysis the Reliability of Travel Time in Urban Corridors in Baghdad City
Travel-time reliability is a crucial performance measure for transportation systems. This research aims to estimate travel time and predict delay time on three routes in Baghdad city using GPS devices: Safi Al-Den Street, Palestine Street, and the Army Channel Expressway. The study was conducted northward from 7:00 a.m. to 9:00 p.m. Reliability indices for the first and second routes with signalized intersections, including buffer index, travel time index, and 95th percentile travel time, were determined. Safi Al-Den Street's buffer time index for links 1 to 3 is approximately 44.75%, 39.87%, and 39.12%, respectively. The highest travel time index value is observed in link 3 at 8.9%. Link 1 has the longest 95% travel time at 659 seconds. Palestine Street shows a high buffer time index in links 1 and 3 at around 32.39% and 24.65%, respectively. The highest travel time index is in link 3 at 6.84%, attributed to congestion from increased educational, medical, and commercial trips. The longest 95% travel time is 430 seconds in link 7. This study offers valuable insights into the reliability of travel time in urban corridors in Baghdad city, aiding transportation planners and engineers in making informed decisions on traffic management, infrastructure development, and policy-making.
- Open Access
- 1 July 2024
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 28 (4) , 541-549
Traffic State Comparison of Signalized Intersections Using SIDRA and SYNCHRO Software
The number of shopping malls and vehicles in Baghdad has quickly increased along with the city's population. This has resulted in an increase in daily trips, which affects the roadway network's traffic flow and causes congestion, particularly on Al-Mansour Street and Al-Rowad Street near the city center. To determine the best signal time, the 14th Ramadan signalized intersection was evaluated and analyzed using the SIDRA 8.0 and SYNCHRO 11.0 software. First, the findings revealed that the chosen traffic facility is presently experiencing a substantial reduction in service level that is leading to forced conditions (LOS "F"). It is suggested that the cycle time at the intersection of the 14th Ramadan be changed from 240 seconds to 160 seconds and 125 seconds in SIDRA and SYNCHRO, respectively. Signal timings have reduced the delay for the 14th Ramadan intersection (76.8%), thus improving LOS from (F) to (D) for the intersection. The best delays after optimization in SYNCHRO 11.0, however, were 31% reduction with LOS of (E and D). Cycle times have also been lowered for the intersection to 25% as part of the optimum signal timing optimization. In SYNCHRO 11.0, which is better than SIDRA 8.0, the back of the queue has improved at the 14th Ramadan intersection by 33%. However, SYNCHRO has a better representation than SIDRA for current traffic saturation
- 1 July 2024
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 28 (4) , 541-549
Open AccessTraffic State Comparison of Signalized Intersections Using SIDRA and SYNCHRO Software
The number of shopping malls and vehicles in Baghdad has quickly increased along with the city's population. This has resulted in an increase in daily trips, which affects the roadway network's traffic flow and causes congestion, particularly on Al-Mansour Street and Al-Rowad Street near the city center. To determine the best signal time, the 14th Ramadan signalized intersection was evaluated and analyzed using the SIDRA 8.0 and SYNCHRO 11.0 software. First, the findings revealed that the chosen traffic facility is presently experiencing a substantial reduction in service level that is leading to forced conditions (LOS "F"). It is suggested that the cycle time at the intersection of the 14th Ramadan be changed from 240 seconds to 160 seconds and 125 seconds in SIDRA and SYNCHRO, respectively. Signal timings have reduced the delay for the 14th Ramadan intersection (76.8%), thus improving LOS from (F) to (D) for the intersection. The best delays after optimization in SYNCHRO 11.0, however, were 31% reduction with LOS of (E and D). Cycle times have also been lowered for the intersection to 25% as part of the optimum signal timing optimization. In SYNCHRO 11.0, which is better than SIDRA 8.0, the back of the queue has improved at the 14th Ramadan intersection by 33%. However, SYNCHRO has a better representation than SIDRA for current traffic saturation
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3091 (1) , 020001
State-of-the-art review of research on the rutting of flexible pavement
Rutting is defined as the permanent deformations of flexible pavement surfaces under the wheel paths of traffic loading; as such, it is a very common problem on Rutting is defined as the permanent deformations of flexible pavement surfaces under the wheel paths of traffic loading; as such, it is a very common problem on
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3091 (1) , 020001
State-of-the-art review of research on the rutting of flexible pavement
Rutting is defined as the permanent deformations of flexible pavement surfaces under the wheel paths of traffic loading; as such, it is a very common problem on Rutting is defined as the permanent deformations of flexible pavement surfaces under the wheel paths of traffic loading; as such, it is a very common problem on
- Open Access
- 13 September 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 427, 03018
The Effect of One-Way Urban Street on Traffic Operation Performance
Traffic congestion has become a serious problem affecting citizens' daily life. Many adopted strategies are studied and applied to alleviate this problem and reduce traffic pressure on street networks. Some are costly, and others are unsuccessful in solving the problem due to higher demand. The one-way traffic movement with circulation modification is adopted in this work which promotes the capacity of streets to sustain higher demand. The study area is identified with the most congested signalized intersection (Al-Nakhala, Al-Sakhara, and Beirut) along the urban corridor. The obtained results suggest using one-way traffic movement with a circulation network that significantly improves traffic operation and reduces congestion to a great extent. Control delays of selected signalized intersections are reduced from about 95%, and v/c is reduced to 0.69 (Al-Nakhala), 0.59 (Al-Sakhara), and 0.99 (Beirut) intersections. The results of modified traffic movement show excessive delays are not experienced, and the traffic movement modification ensures the sufficiency of the signalized corridor to accommodate the traffic demand. The traffic one-way movement can solve the problem of traffic congestion in the study area and improve the level of service from (F) to (A) and (B).
- 13 September 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 427, 03018
Open AccessThe Effect of One-Way Urban Street on Traffic Operation Performance
Traffic congestion has become a serious problem affecting citizens' daily life. Many adopted strategies are studied and applied to alleviate this problem and reduce traffic pressure on street networks. Some are costly, and others are unsuccessful in solving the problem due to higher demand. The one-way traffic movement with circulation modification is adopted in this work which promotes the capacity of streets to sustain higher demand. The study area is identified with the most congested signalized intersection (Al-Nakhala, Al-Sakhara, and Beirut) along the urban corridor. The obtained results suggest using one-way traffic movement with a circulation network that significantly improves traffic operation and reduces congestion to a great extent. Control delays of selected signalized intersections are reduced from about 95%, and v/c is reduced to 0.69 (Al-Nakhala), 0.59 (Al-Sakhara), and 0.99 (Beirut) intersections. The results of modified traffic movement show excessive delays are not experienced, and the traffic movement modification ensures the sufficiency of the signalized corridor to accommodate the traffic demand. The traffic one-way movement can solve the problem of traffic congestion in the study area and improve the level of service from (F) to (A) and (B).