VSValerie Siller

Valerie Siller

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Valerie Siller has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Overcoming cathode coating inhomogeneity: the role of LiF interlayer in enabling conformal LiNbO 3 protection on LiNi 0.8 Co 0.1 Mn 0.1 O 2 for all solid-state batteries

    by Hari Vignesh Ramasamy, Robin N. Wullich, Barthélémy Lelotte, Valerie Siller, Carlos A. F. Vaz, Elisabeth Müller, Mario El Kazzi

    A dual LiF/LiNbO 3 coating on NCM811 converts resistive Li 2 CO 3 into a protecting fast ion conducting shield. When shield with Li 6 PS 5 Cl solid electrolytes, it suppresses interfacial degradation and boosts rate capability for durable ASSBs.

  • Open Access

    Electrochemical and Mechanical Evolution of Sulfide‐Based Solid Electrolytes: Insights from Operando XPS and Cell Pressure Measurements

    by Valerie Siller, Linfeng Xu, Laurent Castro, Aurélie Guéguen, Mario El Kazzi

    Understanding the electrochemical and mechanical behavior of solid electrolytes beyond their electrochemical stability window is crucial for enabling high energy density all‐solid‐state batteries. Accordingly, this work systematically studies a model working electrode of Li 3 PS 4 , ball milled with vapor grown carbon fiber (VGCF). Operando X‐ray photoelectron spectroscopy can identify and quantify the potential‐dependent redox byproducts, their reversibility, and electrical properties, while operando cell pressure measurements correlate these with volume changes and mechanical instability. The study examines voltages up to 5.0 V and down to −0.05 V versus Li/Li + , mimicking cathode and anode cycling. It demonstrates that within the 2.4–5.0 V region, Li 3 PS 4 oxidation byproducts are primarily polysulfides composed of bridging sulfurs (P‐S‐S‐P) between PS 4 3‐ units, free of elemental sulfur (S 0 ), and electrically conductive. The Li 3 PS 4 oxidation process occurs at 2.8 V during first charge and ends at 3.4 V, with volume shrinkage at the VGCF interface. During reduction (2.4 to −0.05 V), polysulfides convert reversibly to Li 3 PS 4 between 1.9 and 1.7 V, then to Li 2 S and Li n P (0 ≤ n ≤ 3) between 1.9 and 0.6 V, causing volume expansion and the transition to an electrically insulating interphase. Below 0.6 V, Li 2 O formation dominates without further evolution of Li 2 S or Li n P.


  • Open Access

    Electrochemical and Mechanical Evolution of Sulfide-Based Solid Electrolytes: Insights from Operando XPS and Cell Pressure Measurements

    by Valerie Siller, Linfeng Xu, Laurent Castro, Aurélie Guéguen, Mario El Kazzi

    Understanding the electrochemical and mechanical behavior of solid electrolytes beyond their electrochemical stability window is crucial for enabling high energy density all-solid-state batteries. Accordingly, this work systematically studies a model working electrode of Li3PS4, ball milled with vapor grown carbon fiber (VGCF). Operando X-ray photoelectron spectroscopy can identify and quantify the potential-dependent redox byproducts, their reversibility, and electrical properties, while operando cell pressure measurements correlate these with volume changes and mechanical instability. The study examines voltages up to 5.0 V and down to -0.05 V vs. Li/Li+, mimicking cathode and anode cycling. It demonstrates that within the 2.4 V – 5.0 V region, Li3PS4 oxidation byproducts are primarily polysulfides composed of bridging sulfurs (P-S-S-P) between PS43- units, free of elemental sulfur (S0), and electrically conductive. The Li3PS4 oxidation process occurs at 2.8 V during 1st charge and ends at 3.4 V, with volume shrinkage at the VGCF interface. During reduction (2.4 to -0.05 V), polysulfides convert reversibly to Li3PS4 between 1.9 – 1.7 V, then to Li2S and LinP (0 ≤ n ≤ 3) between 1.9 – 0.6 V, causing volume expansion and the transition to an electrically insulating interphase. Below 0.6 V, Li2O formation dominates without further evolution of Li2S or LinP.

  • Open Access

    Toolkit for spectral and multivariate statistical analysis of XPEEM images for studying composite energy materials

    by Barthélémy Lelotte, Valerie Siller, Vincent Pelé, Christian Jordy, Lorenz Gubler, Mario El Kazzi, Carlos A.F. Vaz


  • Open Access

    Impacts of key physical parameters on the cycling of thin metallic lithium in sulfide-based all-solid-state batteries

    by Jinsong Zhang, Robin Wullich, Linfeng Xu, Valerie Siller, Thomas J. Schmidt, Mario El Kazzi


  • Open Access

    Revealing the Hidden Polysulfides in Solid-State Na–S Batteries: How Pressure and Electrical Transport Control Kinetic Pathways

    by Hung Quoc Nguyen, Mikael Dahl Kanedal, Juraj Todt, Feng Jin, Quyen Do, Dora Zalka, Alexey Maximenko, Dragos Stoian, Norbert Schell, Wouter van Beek, et al.

    Room temperature operation of Na-S batteries with liquid electrolytes is plagued by fundamental challenges stemming from polysulfide solubility and their shuttle effects. Inorganic solid electrolytes offer a promising solution by acting as barriers to polysulfide migration, mitigating capacity loss. While the sequential formation of cycling products in molten-electrode and liquid electrolytes-based Na-S batteries generally aligns with the expectations from the Na-S phase diagram, their presence, stability, and transitory behavior in systems with inorganic solid electrolytes at room temperature, remain poorly understood. To address this, we employed operando scanning microbeam X-ray diffraction, operando X-ray photoelectron spectroscopy and ex-situ X-ray absorption spectroscopy to investigate the sulfur conversion mechanisms in Na-S cells with Na3PS4 and Na4(B10H10)(B12H12) electrolytes. Our findings reveal the formation of crystalline and amorphous polysulfides, including those predicted by the Na-S phase diagram (e.g., Na2S5, Na2S4, Na2S2, Na2S), high-order polysulfides observed in liquid-electrolyte systems (e.g., Na2Sx, where x = 6-8), and phases like Na2S3 typically stable only under high-temperature or high-pressure conditions. We demonstrate that these transitions are governed by diffusion-limited kinetics and localized stress concentrations, emphasizing the critical role of pressure, which serves as both a thermodynamic variable, as well as a design parameter, for optimizing solid-state Na-S battery performance necessary for pushing these cells closer to the commercial frontier.


  • Open Access

    Building Solid-State Batteries: Insights from Swiss Research Labs

    by Kostiantyn V. Kravchyk, Corsin Battaglia, Valerie Siller, Barthélémy Lelotte, Mario El Kazzi, Jedrzej Morzy, Moritz Futscher, Yaroslav Romanyuk, Michael Stalder, Axel Fuerst, et al.

    This review article delves into the growing field of solid-state batteries as a compelling alternative to conventional lithium-ion batteries. The article surveys ongoing research efforts at renowned Swiss institutions such as ETH Zurich, Empa, Paul Scherrer Institute, and Berner Fachhochschule covering various aspects, from a fundamental understanding of battery interfaces to practical issues of solid-state battery fabrication, their design, and production. The article then outlines the prospects of solid-state batteries, emphasizing the imperative practical challenges that remain to be overcome and highlighting Swiss research groups’ efforts and research directions in this field.


  • Open Access

    Benchmarking the performance of lithiated metal oxide interlayers at the LiCoO2|LLZO interface

    by André Müller, Faruk Okur, Abdessalem Aribia, Nicolas Osenciat, Carlos A. F. Vaz, Valerie Siller, Mario El Kazzi, Evgeniia Gilshtein, Moritz H. Futscher, Kostiantyn V. Kravchyk, et al.

    Lithiated Nb, Al, or Ti metal oxide interlayers improve the LiCoO2/LLZO interface, whereby the Li–Nb–O interlayer exhibits the highest performance.


  • Open Access

    Effect of Film Thickness on the Kinetics of Lithium Insertion in LiMn2O4 Films Made by Multilayer Pulsed Laser Deposition for Thin‐Film All‐Solid‐State Battery Cathode Materials**

    by Collins Erinmwingbovo, Valerie Siller, Marc Nuñez, Rafael Trócoli, Doriano Brogioli, Albert Tarancón, Alejandro Morata, Fabio La Mantia

    Multi‐layer pulsed laser deposition is a promising technique for producing thin films for solid‐state batteries. In this work, thin films are deposited with different numbers of pulses, leading to different thicknesses and grain sizes. We investigated “in operando” the kinetics of the transfer into films by means of dynamic impedance spectroscopy. This technique allowed us to resolve the contributions of the reaction mechanism and of the transport phenomena, as well as to quantify their equivalent resistances. Surprisingly, with increasing film thickness, the charge transfer resistance increases while the apparent diffusion coefficient of lithium increases, leading to a decrease of the mass transport resistance. It appears that both these effects are related to the dimension of the crystals in the thin films. These results provide new insights for an optimal tuning of the materials’ preparation in view of maximizing their electrochemical performances.


  • Open Access

    Nanoscaled LiMn2O4 for Extended Cycling Stability in the 3 V Plateau

    by Valerie Siller, Juan Carlos Gonzalez-Rosillo, Marc Nuñez Eroles, Federico Baiutti, Maciej Oskar Liedke, Maik Butterling, Ahmed G. Attallah, Eric Hirschmann, Andreas Wagner, Alex Morata, et al.

    Extending the potential window toward the 3 V plateau below the typically used range could boost the effective capacity of LiMn2O4 spinel cathodes. This usually leads to an "overdischarge" of the cathode, which can cause severe material damage due to manganese dissolution into the electrolyte and a critical volume expansion (induced by Jahn-Teller distortions). As those factors determine the stability and cycling lifetime for all-solid-state batteries, the operational window of LiMn2O4 is usually limited to 3.5-4.5 V versus Li/Li+ in common battery cells. However, it has been reported that nano-shaped particles and thin films can potentially mitigate these detrimental effects. We demonstrate here that porous LiMn2O4 thin-film cathodes with a certain level of off-stoichiometry show improved cycling stability for the extended cycling range of 2.0-4.5 V versus Li/Li+. We argue through operando spectroscopic ellipsometry that the origin of this stability lies in the surprisingly small volume change in the layer during lithiation.