CGCharleston Gonçalves

Charleston Gonçalves

*This is an algorithmically generated author record based on publicly available information.

Charleston Gonçalves has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Morphological characterization and plant density of Brazilian ornamental sweet potatoes

    by Mônica Mieko Nakanishi Tamura, Claudia Fabrino Machado Mattiuz, Fernando Angelo Piotto, Valdemir Antonio Peressin, Charleston Gonçalves, José Carlos Feltran, Luis Carlos Bernacci, Lilian Cristina Anefalos, Eliane Gomes Fabri

    The production of flowers and ornamental plants has shown continuous growth and demanded constant innovations in the sector. The sweet potato (Ipomoea batatas (L.) Lam.) is a tuberous vegetable that has attracted consumers, growers and landscapers due to its ornamental characteristics of its leaves and vines. However, the introduction of sweet potatoes for ornamental purposes is recent in the Brazilian market. The objective of this study was to investigate the ornamental potential of five sweet potato genotypes (IAC104, IAC116, IAC401, IAC909 and IAC1024), through morphological characterization, in addition to evaluating the effect of plant density in pot (1, 2 and 3 plants in pot) on the development of the aerial part and storage roots. The genotypes IAC116, IAC401 and IAC909 showed characteristics of erect and compact plants, while IAC401 and IAC1024 were classified as semi-erect, with only IAC1024 showing a twining vine. Increasing the density of plants resulted in a significant increase in both the number and fresh matter of storage roots in pot, but there was no significant difference in the fresh matter of the aerial part. As a result of this study, the first five ornamental sweet potato cultivars in Brazil were registered with the Ministry of Agriculture, Livestock and Supply (MAPA), named ‘IAC Claudia’, ‘IAC Katherine’, ‘IAC Mara’, ‘IAC Mônica’ and ‘IAC Yoka’, with registration numbers 51087, 51090, 51091, 51092 and 51093, respectively.


  • Open Access

    Zingiber: synonymy, accepted and excluded species

    by Carlos Eduardo Ferreira de Castro, Charleston Gonçalves, Vivian Loges, Armando Reis Tavares, Fábio de Barros, Ana Cecília Ribeiro de Castro

    Among the species of the Zingiberaceae family, ginger (Zingiber officinale Roscoe) is the best known and studied species, with several reported ornamental, medicinal, and culinary properties. Many ornamental species of the genus Zingiber are commonly treated as gingers by analogy. This study provides a list of species of the genus Zingiber, information on synonyms and comments on ornamental aspects.


  • Open Access

    Heliconias with pendent inflorescences as cut flowers

    by Charleston Gonçalves, Armando Reis Tavares, Silvia Moreira Rojo Vega, Daniela Merida, Carlos Eduardo Ferreira de Castro

    The Heliconia species with pendent inflorescences and colorful bracts are a good option as a cut flower for floriculture market, but only a few species of this type of Heliconia eg. H. rostrata, H. rauliniana and H. chartacea are commercially produced in Brazil. This study was carried out to characterize 36 Heliconia accessions, with pendent inflorescences, to be used as cut flower, intending to increase knowledge and use of these exceptional plants among tropical flower enthusiasts and consumers. The evaluations were performed on plants of the Germplasm Collection of the Instituto Agronômico (IAC) growing in shade, partial shade or full sun conditions. Qualitative and quantitative characteristics, related to clump growth and flower stem aspects were analyzed. A point scoring system was used to determine the species most suitable for cut flower utilization. All evaluated genotypes reached enough points to be considered suitable for use as cut flowers, even those with large inflorescences and bracts arranged in different planes, facts that affect and limit handling, packaging and transportation. H. mariae, H. fernandezii, H. platystachys, H. rauliniana, H. rostrata, H. standley, H. necrobracteata and H. laxa were considered outstanding. This characterization and scoring system were important to facilitate the selection of heliconia genotypes for use as cut flowers.


  • Open Access

    Characterization and selection of torch ginger for cut flower

    by Paula Guimarães Pinheiro de Araújo, João Calos César De Albuquerque Filho, Simone Santos Lira Silva, Carlos Eduardo Ferreira De Castro, Charleston Gonçalves, Vivan Loges

    Torch ginger, Etlingera elatior, is among the most cultivated tropical flower of its genus. Its great acceptability in the market led researchers to improve production characteristics and to adapt it for commercialization. This study aimed to characterize 10 genotypes of torch ginger in order to select and recommend them as cut flower. The experiment ran from Jan 2014 to Dec 2016 in Paulista, Brazil and nine agro-morphological characteristics were evaluated to build a grading system that determined their suitability for cut flower. The IAC 26 and IAC 34 genotypes were classified as poorly suitable, for they presented fresh mass exceeding 237 g. They also presented less than 19 flower stems per clump and only one month with ≥1 floral stem produced in 2015. The genotypes IAC 1, IAC 2, IAC 3, IAC 11, IAC 13 and the cultivar IAC Prumirim were classified as suitable, although they obtained intermediate scores for most of the evaluated criteria. The genotype IAC 41 and the cultivar IAC Camburi were classified as very suitable for cut flower, beginning of flowering period at 12 months, produce 33.25 and 41.20 flower stem per clump, respectively, and present seven months with production of more than one floral stem per clump in 2016, achieving maximum scores from most of the evaluated characteristics.


  • Open Access

    Morphophenological characterization of ornamental ginger and selection for landscape use

    by Carlos Eduardo Ferreira de Castro, Ana Cecilia Ribeiro Castro, Charleston Gonçalves, Vivian Loges

    Many species of Zingiber have great ornamental potential, due to durability and exotic appearance of the inflorescences. Despite its large phenotypic variability, they are scarcely exploited or not yet exploited regarding the ornamental potential. To conserve potential ornamental genotypes, and subsidize breeding program, the Agronomic Institute (IAC) maintain a Germoplasm Collection of Ornamental Zingiberales with promising accessions, including Zingiber. The aim was the morphophenological characterization of ten Zingiber accessions and the indication for landscape purposes. A large variation was observed to the evaluated characters: Clump height (CH); Inflorescence visualization (IV); Clump area (CA); Clump density (CD); Leaf stem Firmness (LSF); Number of leaf stems per clump (NLSC); Number of leaves per stem (NLS); Leaf color (LCol); Evergreen tendency (ET); Flower stem growth (FSG); Flower stem length (FSLe); Flower stem diameter (FSD); Flower stem per clump (FSC); Color sensorial perception (CSP); Flower stem weight (FSW); Inflorescence length (IL); Inflorescence diameter (ID); Bracts aspects (BAs); and Flowering season (FSe). The accessions very suitable and with the best performance to use for landscape purpose were Z. spectabile, IAC Anchieta (Z. spectabile), Z. newmanii.


  • Open Access

    Zingiber zerumbet flower stem postharvest characterization

    by Charleston Gonçalves, Carlos Eduardo Ferreira De Castro, Ana Cecília Ribeiro De Castro, Vivian Loges

    About the Zingiber zerumbet little is known about its cut flower postharvest and market, despite its high ornamental potential. The inflorescences, which resemble a compact cone, emerge from the base of the plants and start with green color changing to red with the age. This study objective was to characterize floral stem of ornamental ginger in two cultivate conditions and to evaluate the longevity of those submitted to post-harvest treatments. Flower stems were harvest from clumps cultivated under full sun and partial shade area, and were submitted to the postharvest treatments: complete flower immersion in tap water (CFI) or only the base stem immersion (BSI). The flower stems harvested from clumps at partial shade presented higher fresh weight, length and diameter of the inflorescences compared to flower stems harvested from clumps at full sun area. The flower stem bracts cultivated in full sun area changed the color from green to red 10.69 and 11.94 days after BSI and CFI postharvest treatments, and the vase life were 22.94 and 28.19 days, respectively. Flower stem harvest in partial shade area change the color only after 18.94 and 18.43 days and the vase life durability was 27.56 and 31.81, respectively. The complete immersion of the flower stem increase the vase life durability in 5.25 and 4.25 days compared to flowers kept with the stem base immersed only, in flower stems harvested from clumps cultivated in full sun area and partial shade area, respectively. Flower stems harvested from clumps cultivated in partial shade area and completely immerse in tap water during 3 hours increase the vase life durability in 8.87 days compared to flowers harvested from clumps cultivated in full sun area and base immersed only.

  • Open Access

    Characteristics of pendent heliconia for use in landscape and as cut flower

    by Vivian Loges, Carlos Eduardo Ferreira de Castro, Ana Cecília Ribeiro de Castro, Charleston Gonçalves

    The Heliconia species with pendent inflorescences and colorful bracts is a good option for landscaping in tropical gardens and cut flowers market. In Brazil only a few species of Heliconia are commercially produced eg. H. rostrata, H. rauliniana and H. chartacea. Aiming to increase the use of outstanding native plants and the knowledge of these products for enthusiasts of tropical flowers, this work was carried out to characterize H. chartacea, H. collinsiana, H. magnifica, H. pendula, H. platystachys, H. pogonantha, H. rostrata, H. rauliniana and H. vellerigera for use in landscaping and as cut flower. The evaluations were performed on plants belonging to the Germplasm Collection of the Instituto Agronômico (IAC), in Ubatuba Unit of Research and Development, located in Ubatuba, São Paulo State, growing in partial shade conditions. Qualitative and quantitative characteristics related to clump and flower stem aspects were analyzed. A point scoring system was used to determine the species most suitable as landscape plant or as cut flower. The plant height range from 2.3 (H. rostrata) to 7.0 m (H. pogonantha), having inflorescence with vibrant and different colors, varying between yellow, orange, red, pink, green and two color combinations. The inflorescences from most of the species were visible in the clump and remain in good conditions for two (H. platystachys) to five months (H. magnifica, H. rostrata and H. pogonantha) and present six (H. platystachys and H. pendula) to 40 (H. pogonantha) open bracts. White wax in leaves or inflorescences were observed in H. collinsiana, H. chartacea, H. pendula and H. platystachys. On the other hand, H. magnifica, H. rostrata, H. pogonantha and H. vellerigera exhibit a hairy surface, pubescent to lanuginose. The postharvest durability longer than 10 days was observed only in H. platystachys, H. rostrata, H. chartacea, and H. rauliniana. This characterization and scoring system were important to indicate and diversify heliconia use for landscaping and cut flower.


  • Open Access

    Temperatura-base e soma térmica para a Zínia ‘Profusion Cherry’ envasada cultivada em ambiente protegido

    by Charleston Gonçalves, Carlos Eduardo Ferreira Castro, Mário José Pedro Júnior, Maria Luiza Sant’aNna Tucci

    The growing of consumer market demands introduction of new species of flowers and cultivars primarily for production under protected cultivation. The zinnia by the quickness of production can be regarded as an alternative, however demand studies by the lack of information in the literature. We evaluated the duration of different periods, the base temperature and thermal accumulation, expressed as degree-days for the potted zinnia ‘Profusion Cherry’, conducted under protected cultivation for different phenological subperiods. The test was conducted in a greenhouse covered with plastic and closed laterally with shading-net and the duration of subperiods were made to twenty times after sowing. The base temperature was determined by relative development and values-based temperature and thermal time in degree-days (DD). The results for the different phases were, respectively: first open flower-planting: 4.1 °C and GD 838, first open flower - 50% of flowers open: 3.0 °C and 184 GD and 50% of flowers open - senescence: 6.9 °C and 238 GD.

  • Open Access

    Divergência genética de Etlingera elatior baseada em caracteristicas agromorfológicas para flores de corte

    by Charleston Gonçalves, Carlos Augusto Colombo, Carlos Eduardo Ferreira Castro

    Apesar da grande aceitabilidade do bastão do imperador (Etlingera elatior) pelo consumidor, seu cultivo e mercado ainda são restritos, devido à elevada massa das inflorescências (acima de 1 kg), o que dificulta os processos de colheita, manuseio, embalamento e transporte. Objetivou-se neste trabalho a realizar a caracterização agromorfológica e estimar a divergência genética entre acessos de Etlingera elatior (Jack) R.M. Sm. com padrão para flor de corte. Um stand de 75 acessos resul­tantes do cruzamento ao acaso entre os genótipos da coleção de germoplasma com variabilidade para inflorescências de interesse comercial, mantêm-se em cultivo na Unidade de Pesquisa e Desenvolvimento de Ubatuba. Dezessete descritores foram avaliados relativos a folha, inflorescência e a infrutescência. A massa da inflorescência, comprimento e diâmetro da haste floral, altura e diâmetro da inflorescência foram selecionados como os descritores de maior importância para seleção de acessos com padrão para a comercialização como flor de corte. Foram selecionados 12 acessos promissores, possuindo características adequadas ao mercado e com boa combinação de formas e coloração de brácteas.


  • Open Access

    Helicônias brasileiras: características, ocorrência e usos

    by Carlos Eduardo Ferreira de Castro, Charleston Gonçalves, Silvia Rocha Moreira, Otavio Augusto Faria

    Face o constante crescimento do cultivo de helicônias no Brasil, processo que alia aumento de área cultivada com a diversificação de espécies exploradas, propôs-se, neste trabalho, apresentar aquelas que têm ocorrência natural em nosso país. Para cada espécie, foi definida a sinonímia, elaborada uma breve caracterização botânica e indicadas as regiões e ambiente de ocorrência natural. Também foram evidenciadas algumas características que as diferenciam de outras espécies do gênero e comentado seu uso como planta ornamental. São relatadas 34 espécies como de ocorrência natural do Brasil, incluindo a H. schumanniana Loes. e excluindo a H. latispatha Benth, constante em outros artigos, uma vez que no aprofundamento da revisão e consultas efetuadas em trabalhos científicos, descrição de espécies, relatos de expedições de coleta e informações pessoais de especialistas no gênero, não foi encontrado o necessário suporte para mantê-la como espécie de ocorrência natural do Brasil.