Chrystelle Bernard
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chrystelle Bernard has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
O. Lame
Materials Engineering and Science (MATEIS), CNRS, INSA-Lyon, UMR5510, Université de Lyon, Villeurbanne, France
4 shared publicationsG. Diguet
Micro System Integration Center, Micro/Nano-Machining Research and Education Center, Tohoku University, Sendai, Japan
3 shared publicationsH. Takana
Institute of Fluid Science, Tohoku University, Sendai, Japan
3 shared publications- Jean-Yves Cavaillé
Université de Lyon, INSA-Lyon, MATEIS, UMR CNRS 5510, bât B. Pascal, 7 av. J. Capelle, 69621 Villeurbanne Cedex, France
3 shared publications K. Ogawa
ELyTMaX IRL3757, CNRS, Univ Lyon, INSA Lyon, Centrale Lyon, Université Claude Bernard Lyon 1, Tohoku University, Sendai, Japan
3 shared publicationsKazuhiro Ogawa
Fracture and Reliability Research Institute, Tohoku University Aoba-ku, Sendai, Japan
3 shared publications
Latest Publications
- 1 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Intégration dans un code éléments finis d'un modèle de comportement en grandes déformations pour les polymères amorphes : applications à une large gamme de vitesses de déformation et à la mise en forme
De nos jours, de nombreuses pièces mécaniques sont fabriquées en polymères. Ces matériaux présentent un comportement complexe très sensible à la vitesse de déformation et à la température. De nombreux modèles de comportement mécanique, tenant compte de cette double sensibilité, ont été développés au cours des dernières années dans le but de décrire le comportement élasto-viscoplastique des polymères en grandes déformations sur de larges plages de vitesses de déformation et de températures. Afin de prévoir la tenue de pièces mécaniques en polymère soumises à un ensemble de sollicitations complexes, l'utilisation de méthodes numériques, telles que la méthode des Éléments Finis (EF), s'avèrent incontournables. Cependant, la qualité de la prévision numérique est fortement dépendante de la loi de comportement utilisée. Ainsi, nous proposons d'étudier deux modèles de comportement qui ont été introduits dans deux codes de calcul par EF : un modèle phénoménologique simple, introduit dans CAST3M, et un modèle micromécanique, introduit dans ABAQUS/Explicit. Le modèle phénoménologique permet de modéliser le comportement mécanique des polymères vitreux en petites déformations sur une plage de vitesses de déformation et de températures réduite. Un essai de compression reproduisant le dispositif des barres d'Hopkinson a été simulé pour plusieurs vitesses de déformation et températures. Une bonne corrélation a été trouvée entre résultats expérimentaux et les prévisions numériques. De plus, de rapides estimations du coefficient de Taylor-Quinney et de la contrainte à l'interface, liée au frottement entre l'échantillon et les barres de compression, ont pu être trouvées. Le modèle micromécanique décrit le comportement des polymères amorphes en grandes déformations sur de larges gammes de vitesses de déformation et de températures. Il a été développé au sein de notre équipe de recherche par Richeton et al. [Int. J. Solids Struct. 44 (2007) 7938] et propose une dépendance à la vitesse de déformation et à la température de différentes propriétés matériau (module élastique, contrainte seuil, durcissement structural). Afin de modéliser le comportement de structures polymères soumises à des chargements dynamiques ou à de la mise en forme, un sous-programme VUMAT est écrit. Après validation de l'intégration numérique du sous-programme sur des essais de compression/traction simple, deux applications ont été simulées. La première application a consisté en la modélisation d'un essai d'impact d'une plaque polymère par un projectile hémisphérique. La seconde application est un essai de forgeage à froid. Dans les deux cas, les prévisions numériques sont en accord avec les résultats expérimentaux issus de la littérature.
- 1 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Intégration dans un code éléments finis d'un modèle de comportement en grandes déformations pour les polymères amorphes : applications à une large gamme de vitesses de déformation et à la mise en forme
De nos jours, de nombreuses pièces mécaniques sont fabriquées en polymères. Ces matériaux présentent un comportement complexe très sensible à la vitesse de déformation et à la température. De nombreux modèles de comportement mécanique, tenant compte de cette double sensibilité, ont été développés au cours des dernières années dans le but de décrire le comportement élasto-viscoplastique des polymères en grandes déformations sur de larges plages de vitesses de déformation et de températures. Afin de prévoir la tenue de pièces mécaniques en polymère soumises à un ensemble de sollicitations complexes, l'utilisation de méthodes numériques, telles que la méthode des Éléments Finis (EF), s'avèrent incontournables. Cependant, la qualité de la prévision numérique est fortement dépendante de la loi de comportement utilisée. Ainsi, nous proposons d'étudier deux modèles de comportement qui ont été introduits dans deux codes de calcul par EF : un modèle phénoménologique simple, introduit dans CAST3M, et un modèle micromécanique, introduit dans ABAQUS/Explicit. Le modèle phénoménologique permet de modéliser le comportement mécanique des polymères vitreux en petites déformations sur une plage de vitesses de déformation et de températures réduite. Un essai de compression reproduisant le dispositif des barres d'Hopkinson a été simulé pour plusieurs vitesses de déformation et températures. Une bonne corrélation a été trouvée entre résultats expérimentaux et les prévisions numériques. De plus, de rapides estimations du coefficient de Taylor-Quinney et de la contrainte à l'interface, liée au frottement entre l'échantillon et les barres de compression, ont pu être trouvées. Le modèle micromécanique décrit le comportement des polymères amorphes en grandes déformations sur de larges gammes de vitesses de déformation et de températures. Il a été développé au sein de notre équipe de recherche par Richeton et al. [Int. J. Solids Struct. 44 (2007) 7938] et propose une dépendance à la vitesse de déformation et à la température de différentes propriétés matériau (module élastique, contrainte seuil, durcissement structural). Afin de modéliser le comportement de structures polymères soumises à des chargements dynamiques ou à de la mise en forme, un sous-programme VUMAT est écrit. Après validation de l'intégration numérique du sous-programme sur des essais de compression/traction simple, deux applications ont été simulées. La première application a consisté en la modélisation d'un essai d'impact d'une plaque polymère par un projectile hémisphérique. La seconde application est un essai de forgeage à froid. Dans les deux cas, les prévisions numériques sont en accord avec les résultats expérimentaux issus de la littérature.
- Open Access
- 22 January 2024
- Published by Springer Nature in Journal of Thermal Spray Technology
- Vol. 33 (1) , 3-16
Optimal Design of a Cold Spray Nozzle for Inner Wall Coating Fabrication by Combining CFD Simulation and Neural Networks
Recently, the low-pressure cold spray (LPCS) technique has been used to fabricate superhydrophobic polymer coatings on metallic substrates, suggesting a significant potential in engineering applications. This study aims to design a spiral LPCS nozzle to coat the pipe’s inner wall with superhydrophobic polymer. The design goal is to achieve the maximum particle velocity in a confined (limited) space, assuming that the powder can enter the feeding tube through the Venturi effect. Achieving these two goals simultaneously using only computational fluid dynamics (CFD) simulation is challenging. Therefore, the CFD simulation was combined with the neural network (NN) method to design the new spiral nozzle. During training, the effects of the NN models and algorithms were investigated. The results showed that the feedforwardnet model combined with the trainbr or trainlm algorithm (from MATLAB 2016b software), presented a minimal error for particle velocity or gas flux prediction, respectively. The trained NN correlates the nozzle parameters (i.e., mean coil diameter, spring lift angle, and expansion ratio) and its performances (i.e., particle velocity and gas flux in the powder feeding tube). As a result, the optimal spiral nozzle was determined based on the design goal of maximum particle velocity and suitable gas flux in the powder feeding tube. Furthermore, the effect of each nozzle parameter on the particle velocity and gas flux in the powder feeding tube was analyzed. The cold spray experiment confirmed that the designed spiral nozzle could fabricate Perfluoroalkoxy alkane (PFA) coatings.
- 22 January 2024
- Published by Springer Nature in Journal of Thermal Spray Technology
- Vol. 33 (1) , 3-16
Open AccessOptimal Design of a Cold Spray Nozzle for Inner Wall Coating Fabrication by Combining CFD Simulation and Neural Networks
Recently, the low-pressure cold spray (LPCS) technique has been used to fabricate superhydrophobic polymer coatings on metallic substrates, suggesting a significant potential in engineering applications. This study aims to design a spiral LPCS nozzle to coat the pipe’s inner wall with superhydrophobic polymer. The design goal is to achieve the maximum particle velocity in a confined (limited) space, assuming that the powder can enter the feeding tube through the Venturi effect. Achieving these two goals simultaneously using only computational fluid dynamics (CFD) simulation is challenging. Therefore, the CFD simulation was combined with the neural network (NN) method to design the new spiral nozzle. During training, the effects of the NN models and algorithms were investigated. The results showed that the feedforwardnet model combined with the trainbr or trainlm algorithm (from MATLAB 2016b software), presented a minimal error for particle velocity or gas flux prediction, respectively. The trained NN correlates the nozzle parameters (i.e., mean coil diameter, spring lift angle, and expansion ratio) and its performances (i.e., particle velocity and gas flux in the powder feeding tube). As a result, the optimal spiral nozzle was determined based on the design goal of maximum particle velocity and suitable gas flux in the powder feeding tube. Furthermore, the effect of each nozzle parameter on the particle velocity and gas flux in the powder feeding tube was analyzed. The cold spray experiment confirmed that the designed spiral nozzle could fabricate Perfluoroalkoxy alkane (PFA) coatings.
- Open Access
- 11 April 2023
- Published by Elsevier in Computational Particle Mechanics
- Vol. 10 (6) , 1697-1716
Thermal gradient in polymeric particles during the cold spray process
- 11 April 2023
- Published by Elsevier in Computational Particle Mechanics
- Vol. 10 (6) , 1697-1716
Open AccessThermal gradient in polymeric particles during the cold spray process
- 11 May 2022
- Published by Springer Nature in Journal of Thermal Spray Technology
- Vol. 31 (6) , 1776-1791
Influence of the Nozzle Inner Geometry on the Particle History During Cold Spray Process
- 11 May 2022
- Published by Springer Nature in Journal of Thermal Spray Technology
- Vol. 31 (6) , 1776-1791
Influence of the Nozzle Inner Geometry on the Particle History During Cold Spray Process
- Open Access
- 15 June 2021
- Published by ASM International
- Vol. 83881, 147-152
Influence of the Low-Pressure Cold Spray Operation Parameters on Coating Properties in Metallization of Ceramic Substrates Using Copper and Aluminum Composite Powder
The low-pressure cold spray (LPCS) technique could be an attractive method for copper metallization of ceramic substrates to power module applications due to its one-step quick and lowtemperature process. However; manufacturing pure copper coating on a ceramic substrate by LPCS is still challenging due to its low deposition efficiency and poor adhesion strength. Our previous study successfully demonstrated the possibility of obtaining a zirconia substrate's metallization by using a feedstock powder mixture of copper and aluminum. However; the copper content in the coating was not high enough for power module applications. Therefore; in this study; we aim to improve the copper content in the coating layer composed of the composite powder deposited by LPCS on alumina and zirconia substrates. The influence of the gas pressure and standoff distance on the copper content and coating thickness are evaluated. The coating build-up with a high copper content and thickness is highly dependent on the kinetic energy of particles; enhanced by high gas pressure and short stand-off distance.
- 15 June 2021
- Published by ASM International
- Vol. 83881, 147-152
Open AccessInfluence of the Low-Pressure Cold Spray Operation Parameters on Coating Properties in Metallization of Ceramic Substrates Using Copper and Aluminum Composite Powder
The low-pressure cold spray (LPCS) technique could be an attractive method for copper metallization of ceramic substrates to power module applications due to its one-step quick and lowtemperature process. However; manufacturing pure copper coating on a ceramic substrate by LPCS is still challenging due to its low deposition efficiency and poor adhesion strength. Our previous study successfully demonstrated the possibility of obtaining a zirconia substrate's metallization by using a feedstock powder mixture of copper and aluminum. However; the copper content in the coating was not high enough for power module applications. Therefore; in this study; we aim to improve the copper content in the coating layer composed of the composite powder deposited by LPCS on alumina and zirconia substrates. The influence of the gas pressure and standoff distance on the copper content and coating thickness are evaluated. The coating build-up with a high copper content and thickness is highly dependent on the kinetic energy of particles; enhanced by high gas pressure and short stand-off distance.
- 20 May 2021
- Published by Springer Nature in Journal of Thermal Spray Technology
- Vol. 30 (5) , 1294-1309
Development and Characterization of Photocatalytic GaN Coatings by Cold Spray Process
- 20 May 2021
- Published by Springer Nature in Journal of Thermal Spray Technology
- Vol. 30 (5) , 1294-1309
Development and Characterization of Photocatalytic GaN Coatings by Cold Spray Process
- Open Access
- 1 April 2021
- Published by Elsevier in Physics Letters A
- Vol. 396
Electromechanical properties of ferroelectric polymers: Finsler geometry modeling and a Monte Carlo study
- 1 April 2021
- Published by Elsevier in Physics Letters A
- Vol. 396
Open AccessElectromechanical properties of ferroelectric polymers: Finsler geometry modeling and a Monte Carlo study
- 1 December 2020
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 286
Thermal gradient of in-flight polymer particles during cold spraying
- 1 December 2020
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 286
Thermal gradient of in-flight polymer particles during cold spraying
- Open Access
Coarse-Grained Lattice Modeling and Monte Carlo Simulations of Stress Relaxation in Strain-Induced Crystallization of Rubbers
Two-dimensional triangulated surface models for membranes and their three-dimensional (3D) extensions are proposed and studied to understand the strain-induced crystallization (SIC) of rubbers. It is well known that SIC is an origin of stress relaxation, which appears as a plateau in the intermediate strain region of stress–strain curves. However, this SIC is very hard to implement in models because SIC is directly connected to a solid state, which is mechanically very different from the amorphous state. In this paper, we show that the crystalline state can be quite simply implemented in the Gaussian elastic bond model, which is a straightforward extension of the Gaussian chain model for polymers, by replacing bonds with rigid bodies or eliminating bonds. We find that the results of Monte Carlo simulations for stress–strain curves are in good agreement with the reported experimental data of large strains of up to 1200%. This approach allows us to intuitively understand the stress relaxation caused by SIC.
Open AccessCoarse-Grained Lattice Modeling and Monte Carlo Simulations of Stress Relaxation in Strain-Induced Crystallization of Rubbers
Two-dimensional triangulated surface models for membranes and their three-dimensional (3D) extensions are proposed and studied to understand the strain-induced crystallization (SIC) of rubbers. It is well known that SIC is an origin of stress relaxation, which appears as a plateau in the intermediate strain region of stress–strain curves. However, this SIC is very hard to implement in models because SIC is directly connected to a solid state, which is mechanically very different from the amorphous state. In this paper, we show that the crystalline state can be quite simply implemented in the Gaussian elastic bond model, which is a straightforward extension of the Gaussian chain model for polymers, by replacing bonds with rigid bodies or eliminating bonds. We find that the results of Monte Carlo simulations for stress–strain curves are in good agreement with the reported experimental data of large strains of up to 1200%. This approach allows us to intuitively understand the stress relaxation caused by SIC.
- Open Access
Monte Carlo Study of Rubber Elasticity on the Basis of Finsler Geometry Modeling
Configurations of the polymer state in rubbers, such as so-called isotropic (random) and anisotropic (almost aligned) states, are symmetric/asymmetric under space rotations. In this paper, we present numerical data obtained by Monte Carlo simulations of a model for rubber formulations to compare these predictions with the reported experimental stress–strain curves. The model is defined by extending the two-dimensional surface model of Helfrich–Polyakov based on the Finsler geometry description. In the Finsler geometry model, the directional degree of freedom of the polymers and the polymer position are assumed to be the dynamical variables, and these two variables play an important role in the modeling of rubber elasticity. We find that the simulated stresses are in good agreement with the reported experimental stresses for large strains of up to . It should be emphasized that the stress–strain curves are directly calculated from the Finsler geometry model Hamiltonian and its partition function, and this technique is in sharp contrast to the standard technique in which affine deformation is assumed. It is also shown that the obtained results are qualitatively consistent with the experimental data as influenced by strain-induced crystallization and the presence of fillers, though the real strain-induced crystallization is a time-dependent phenomenon in general.Open AccessMonte Carlo Study of Rubber Elasticity on the Basis of Finsler Geometry Modeling
Configurations of the polymer state in rubbers, such as so-called isotropic (random) and anisotropic (almost aligned) states, are symmetric/asymmetric under space rotations. In this paper, we present numerical data obtained by Monte Carlo simulations of a model for rubber formulations to compare these predictions with the reported experimental stress–strain curves. The model is defined by extending the two-dimensional surface model of Helfrich–Polyakov based on the Finsler geometry description. In the Finsler geometry model, the directional degree of freedom of the polymers and the polymer position are assumed to be the dynamical variables, and these two variables play an important role in the modeling of rubber elasticity. We find that the simulated stresses are in good agreement with the reported experimental stresses for large strains of up to . It should be emphasized that the stress–strain curves are directly calculated from the Finsler geometry model Hamiltonian and its partition function, and this technique is in sharp contrast to the standard technique in which affine deformation is assumed. It is also shown that the obtained results are qualitatively consistent with the experimental data as influenced by strain-induced crystallization and the presence of fillers, though the real strain-induced crystallization is a time-dependent phenomenon in general.