Carlos Bernal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Carlos Bernal has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Bono-Nuez
Department of Electronics and Communications Engineering, University of Zaragoza, Zaragoza, Spain
6 shared publications - Iván Sanz-Gorrachategui
Department of Electronics and Communications Engineering, University of Zaragoza, Zaragoza, Spain
5 shared publications - Francisco Jose Perez-Cebolla
Universidad de Zaragoza
4 shared publications - Jesús Sergio Artal-Sevil
Departamento de Ingeniería Eléctrica, Universidad de Zaragoza, C/María de Luna, 3, 50018 Zaragoza, Spain
4 shared publications - Pablo Pastor-Flores
Department of Electronics and Communications Engineering, University of Zaragoza, Zaragoza, Spain
4 shared publications - Bonifacio Martín-Del-Brío
Department of Electronics and Communications Engineering, University of Zaragoza, Zaragoza, Spain
3 shared publications
Latest Publications
- Open Access
- 10 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (9) , 11086-11098
Estimation of Semiconductor Power Losses Through Automatic Thermal Modeling
Achieving the optimal design of power converters requires a deep understanding of the system's dissipation elements to meet the desired performance and safety standards. Once the power converter is designed, it is of key importance to estimate the actual power losses in the real setup, in order to redesign the power converter or monitor and control the semiconductor power losses. With that purpose, calorimetric techniques have outperformed electrical methods. However, they come with mechanical limitations and depend on analytical electrothermal equivalent circuits. These models are highly topology and technology dependent, often resulting in simplistic representations that underestimate thermal effects or complex sets of differential equations. To overcome these challenges, we present a novel post-design automatic method for characterizing semiconductor power losses through its converter thermal dynamics. Our method is rooted in an optimization program that identifies the optimal discrete-time linear model according to a set of power versus temperature profiles. The proposed approach ensures the accurate identification and integration of desired modeling requirements. The methodology is applicable to any power converter topology, and the derived linear model enables the use of standard control theory techniques for monitorization and control. Experiments with a real power converter validate the proposal's versatility and accuracy.
- 10 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (9) , 11086-11098
Open AccessEstimation of Semiconductor Power Losses Through Automatic Thermal Modeling
Achieving the optimal design of power converters requires a deep understanding of the system's dissipation elements to meet the desired performance and safety standards. Once the power converter is designed, it is of key importance to estimate the actual power losses in the real setup, in order to redesign the power converter or monitor and control the semiconductor power losses. With that purpose, calorimetric techniques have outperformed electrical methods. However, they come with mechanical limitations and depend on analytical electrothermal equivalent circuits. These models are highly topology and technology dependent, often resulting in simplistic representations that underestimate thermal effects or complex sets of differential equations. To overcome these challenges, we present a novel post-design automatic method for characterizing semiconductor power losses through its converter thermal dynamics. Our method is rooted in an optimization program that identifies the optimal discrete-time linear model according to a set of power versus temperature profiles. The proposed approach ensures the accurate identification and integration of desired modeling requirements. The methodology is applicable to any power converter topology, and the derived linear model enables the use of standard control theory techniques for monitorization and control. Experiments with a real power converter validate the proposal's versatility and accuracy.
- Open Access
- 11 November 2022
- Published by MDPI AG in Electronics
- Vol. 11 (22) , 3697
Electrical Response Analysis of a Piezoelectric Energy Harvester Power Source Based on Electromechanical Parameters
A piezoelectric energy harvester generator is a device capable of transforming environmental mechanical energy into electrical energy. The piezoelectric electromechanical parameters determine the maximum electrical power which is able to be transferred to an electric load. In this research work, an exhaustive study of the electromechanical parameters related to the piezoelectric material is carried out, modeling them as components of an electrical circuit, in order to analyze their influence on the transmitted power. On the other hand, some electrical loads are simulated to determine different matrix scenarios for a model developed by state-space equations in the Laplace transform domain. The results obtained have allowed to know how the piezoelectric material properties and mechanical characteristics influence the electrical power output of the energy harvester generator and the energy transmission behavior for different electric loads. The conclusions show how the different electromechanical parameters are related to each other, and how their combination transforms the mechanical environmental energy into the required electrical energy. The novelty of this research is the presentation of a model capable of obtaining the optimized working point of the harvester, taking into account not only the electric loads and current demands but also the piezoelectric material parameters.
- 11 November 2022
- Published by MDPI AG in Electronics
- Vol. 11 (22) , 3697
Open AccessElectrical Response Analysis of a Piezoelectric Energy Harvester Power Source Based on Electromechanical Parameters
A piezoelectric energy harvester generator is a device capable of transforming environmental mechanical energy into electrical energy. The piezoelectric electromechanical parameters determine the maximum electrical power which is able to be transferred to an electric load. In this research work, an exhaustive study of the electromechanical parameters related to the piezoelectric material is carried out, modeling them as components of an electrical circuit, in order to analyze their influence on the transmitted power. On the other hand, some electrical loads are simulated to determine different matrix scenarios for a model developed by state-space equations in the Laplace transform domain. The results obtained have allowed to know how the piezoelectric material properties and mechanical characteristics influence the electrical power output of the energy harvester generator and the energy transmission behavior for different electric loads. The conclusions show how the different electromechanical parameters are related to each other, and how their combination transforms the mechanical environmental energy into the required electrical energy. The novelty of this research is the presentation of a model capable of obtaining the optimized working point of the harvester, taking into account not only the electric loads and current demands but also the piezoelectric material parameters.
- Open Access
On Mechanical and Electrical Coupling Determination at Piezoelectric Harvester by Customized Algorithm Modeling and Measurable Properties
Piezoelectric harvesters use the actuation potential of the piezoelectric material to transform mechanical and vibrational energies into electrical power, scavenging energy from their environment. Few research has been focused on the development and understanding of the piezoelectric harvesters from the material themselves and the real piezoelectric and mechanical properties of the harvester. In the present work, the authors propose a behavior real model based on the experimentally measured electromechanical parameters of a homemade PZT bimorph harvester with the aim to predict its Vrms output. To adjust the harvester behavior, an iterative customized algorithm has been developed in order to adapt the electromechanical coupling coefficient, finding the relationship between the harvester actuator and generator behavior. It has been demonstrated that the harvester adapts its elongation and its piezoelectric coefficients combining the effect of the applied mechanical strain and the electrical behavior as a more realistic behavior due to the electromechanical nature of the material. The complex rms voltage output of the homemade bimorph harvester in the frequency domain has been successfully reproduced by the proposed model. The Behavior Real Model, BRM, developed could become a powerful tool for the design and manufacturing of a piezoelectric harvester based on its customized dimensions, configuration, and the piezoelectric properties of the smart materials.
Open AccessOn Mechanical and Electrical Coupling Determination at Piezoelectric Harvester by Customized Algorithm Modeling and Measurable Properties
Piezoelectric harvesters use the actuation potential of the piezoelectric material to transform mechanical and vibrational energies into electrical power, scavenging energy from their environment. Few research has been focused on the development and understanding of the piezoelectric harvesters from the material themselves and the real piezoelectric and mechanical properties of the harvester. In the present work, the authors propose a behavior real model based on the experimentally measured electromechanical parameters of a homemade PZT bimorph harvester with the aim to predict its Vrms output. To adjust the harvester behavior, an iterative customized algorithm has been developed in order to adapt the electromechanical coupling coefficient, finding the relationship between the harvester actuator and generator behavior. It has been demonstrated that the harvester adapts its elongation and its piezoelectric coefficients combining the effect of the applied mechanical strain and the electrical behavior as a more realistic behavior due to the electromechanical nature of the material. The complex rms voltage output of the homemade bimorph harvester in the frequency domain has been successfully reproduced by the proposed model. The Behavior Real Model, BRM, developed could become a powerful tool for the design and manufacturing of a piezoelectric harvester based on its customized dimensions, configuration, and the piezoelectric properties of the smart materials.
- Open Access
- 6 February 2022
- Published by MDPI AG in Electronics
- Vol. 11 (3) , 480
Demystifying Non-Isolated DC–DC Topologies on Partial Power Processing Architectures
This paper discusses the possibility of achieving partial power processing with non-isolated DC–DC topologies. To this end, partial power converter architectures are seen as an interesting solution for reducing the power processed by the converter. We observed via simulations that single-inductor non-isolated topologies cannot achieve partial power processing since the obtained current and voltage waveforms were the same as those found in a full-power converter. However, when using double inductor non-isolated topologies, reduced current and improved efficiencies were achieved. In order to confirm the results obtained from the simulations, single- and double-inductor topologies were tested experimentally. Finally, it was concluded that a double-inductor non-isolated topology can improve its performance by using partial power processing.
- 6 February 2022
- Published by MDPI AG in Electronics
- Vol. 11 (3) , 480
Open AccessDemystifying Non-Isolated DC–DC Topologies on Partial Power Processing Architectures
This paper discusses the possibility of achieving partial power processing with non-isolated DC–DC topologies. To this end, partial power converter architectures are seen as an interesting solution for reducing the power processed by the converter. We observed via simulations that single-inductor non-isolated topologies cannot achieve partial power processing since the obtained current and voltage waveforms were the same as those found in a full-power converter. However, when using double inductor non-isolated topologies, reduced current and improved efficiencies were achieved. In order to confirm the results obtained from the simulations, single- and double-inductor topologies were tested experimentally. Finally, it was concluded that a double-inductor non-isolated topology can improve its performance by using partial power processing.
- Open Access
- 22 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 158660-158671
Energy Shortage Failure Prediction in Photovoltaic Standalone Installations by Using Machine Learning Techniques
The use of energy storage systems in standalone photovoltaic installations is essential to supply energy demands, independently of solar generation. Accurate prediction of the battery state is critical for the safe, durable, and reliable operation of systems in this type of installations. In this study, an installation located in the area of Aragon (Spain) has been considered. Two methods, based on different types of Recurrent Neural Networks (RNN), are proposed to predict the battery voltage of the installation two days ahead. Specifically, the Nonlinear Auto Regressive with Exogenous Input (NARX) network and the Long Short-Term Memory (LSTM) network are studied and compared. The implemented algorithms process battery voltage, temperature and current waveforms; and rely on the selection of different future scenarios based on weather forecasting to estimate the future voltage of the battery. The proposed methodology is capable of predicting the voltage with a Root Mean Squared Error (RMSE) error of 1.2 V for batteries of 48 V, in critical situations where the installation is running out of energy. The study contributes to the ongoing research of developing preventive control systems that help reduce costs and improve the performance of remote energy storage systems based on renewable energies with a positive outcome.
- 22 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 158660-158671
Open AccessEnergy Shortage Failure Prediction in Photovoltaic Standalone Installations by Using Machine Learning Techniques
The use of energy storage systems in standalone photovoltaic installations is essential to supply energy demands, independently of solar generation. Accurate prediction of the battery state is critical for the safe, durable, and reliable operation of systems in this type of installations. In this study, an installation located in the area of Aragon (Spain) has been considered. Two methods, based on different types of Recurrent Neural Networks (RNN), are proposed to predict the battery voltage of the installation two days ahead. Specifically, the Nonlinear Auto Regressive with Exogenous Input (NARX) network and the Long Short-Term Memory (LSTM) network are studied and compared. The implemented algorithms process battery voltage, temperature and current waveforms; and rely on the selection of different future scenarios based on weather forecasting to estimate the future voltage of the battery. The proposed methodology is capable of predicting the voltage with a Root Mean Squared Error (RMSE) error of 1.2 V for batteries of 48 V, in critical situations where the installation is running out of energy. The study contributes to the ongoing research of developing preventive control systems that help reduce costs and improve the performance of remote energy storage systems based on renewable energies with a positive outcome.
- Open Access
Lithium-Ion Battery Parameter Identification via Extremum Seeking Considering Aging and Degradation
Battery parameters such as State of Charge (SoC) and State of Health (SoH) are key to modern applications; thus, there is interest in developing robust algorithms for estimating them. Most of the techniques explored to this end rely on a battery model. As batteries age, their behavior starts differing from the models, so it is vital to update such models in order to be able to track battery behavior after some time in application. This paper presents a method for performing online battery parameter tracking by using the Extremum Seeking (ES) algorithm. This algorithm fits voltage waveforms by tuning the internal parameters of an estimation model and comparing the voltage output with the real battery. The goal is to estimate the electrical parameters of the battery model and to be able to obtain them even as batteries age, when the model behaves different than the cell. To this end, a simple battery model capable of capturing degradation and different tests have been proposed to replicate real application scenarios, and the performance of the ES algorithm in such scenarios has been measured. The results are positive, obtaining converging estimations both with new and aged batteries, with accurate outputs for the intended purpose.
Open AccessLithium-Ion Battery Parameter Identification via Extremum Seeking Considering Aging and Degradation
Battery parameters such as State of Charge (SoC) and State of Health (SoH) are key to modern applications; thus, there is interest in developing robust algorithms for estimating them. Most of the techniques explored to this end rely on a battery model. As batteries age, their behavior starts differing from the models, so it is vital to update such models in order to be able to track battery behavior after some time in application. This paper presents a method for performing online battery parameter tracking by using the Extremum Seeking (ES) algorithm. This algorithm fits voltage waveforms by tuning the internal parameters of an estimation model and comparing the voltage output with the real battery. The goal is to estimate the electrical parameters of the battery model and to be able to obtain them even as batteries age, when the model behaves different than the cell. To this end, a simple battery model capable of capturing degradation and different tests have been proposed to replicate real application scenarios, and the performance of the ES algorithm in such scenarios has been measured. The results are positive, obtaining converging estimations both with new and aged batteries, with accurate outputs for the intended purpose.
- Open Access
- 17 September 2021
- Published by MDPI AG in Electronics
- Vol. 10 (18) , 2294
Unsupervised Neural Networks for Identification of Aging Conditions in Li-Ion Batteries
This paper explores a new methodology based on data-driven approaches to identify and track degradation processes in Li-ion batteries. Our goal is to study if it is possible to differentiate the state of degradation of cells that present similar aging in terms of overall parameters (similar remaining capacity, state of health or internal resistance), but that have had different applications or conditions of use (different discharge currents, depth of discharges, temperatures, etc.). For this purpose, this study proposed to analyze voltage waveforms of cells obtained in cycling tests by using an unsupervised neural network, the Self-Organizing Map (SOM). In this work, a laboratory dataset of real Li-ion cells was used, and the SOM algorithm processed battery cell features, thus carrying out smart sensing of the battery. It was shown that our methodology differentiates the previous conditions of use (history) of a cell, complementing conventional metrics such as the state of health, which could be useful for the growing second-life market because it allows for determining more precisely the state of disease of a battery and assesses its suitability for a specific application.
- 17 September 2021
- Published by MDPI AG in Electronics
- Vol. 10 (18) , 2294
Open AccessUnsupervised Neural Networks for Identification of Aging Conditions in Li-Ion Batteries
This paper explores a new methodology based on data-driven approaches to identify and track degradation processes in Li-ion batteries. Our goal is to study if it is possible to differentiate the state of degradation of cells that present similar aging in terms of overall parameters (similar remaining capacity, state of health or internal resistance), but that have had different applications or conditions of use (different discharge currents, depth of discharges, temperatures, etc.). For this purpose, this study proposed to analyze voltage waveforms of cells obtained in cycling tests by using an unsupervised neural network, the Self-Organizing Map (SOM). In this work, a laboratory dataset of real Li-ion cells was used, and the SOM algorithm processed battery cell features, thus carrying out smart sensing of the battery. It was shown that our methodology differentiates the previous conditions of use (history) of a cell, complementing conventional metrics such as the state of health, which could be useful for the growing second-life market because it allows for determining more precisely the state of disease of a battery and assesses its suitability for a specific application.
- 25 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (5) , 5111-5121
Nonlinear Implementable Control of a Dual Active Bridge Series Resonant Converter
This article presents a novel control strategy for a dual active bridge series resonant converter. The strategy seeks to ensure the stability of the converter over its entire dynamic range while enhances the transient response. Both properties allow the use of the converter in new applications, where fast dynamics are required, surpassing the performance of existing feedback loops. Starting from the generalized averaged model of the converter, we propose a nonlinear control strategy by means of Lyapunov's stability theory. After that, we derive a series of modifications in order to implement the strategy in a microcontroller or a DSP, including a sensorless method to tackle the lack of measurements of certain variables and an adaptive control law to deal with uncertain parameters in the model. The strategy is evaluated in simulations and experiments, employing a commercial converter, and comparing the results with other control policies.
- 25 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (5) , 5111-5121
Nonlinear Implementable Control of a Dual Active Bridge Series Resonant Converter
This article presents a novel control strategy for a dual active bridge series resonant converter. The strategy seeks to ensure the stability of the converter over its entire dynamic range while enhances the transient response. Both properties allow the use of the converter in new applications, where fast dynamics are required, surpassing the performance of existing feedback loops. Starting from the generalized averaged model of the converter, we propose a nonlinear control strategy by means of Lyapunov's stability theory. After that, we derive a series of modifications in order to implement the strategy in a microcontroller or a DSP, including a sensorless method to tackle the lack of measurements of certain variables and an adaptive control law to deal with uncertain parameters in the model. The strategy is evaluated in simulations and experiments, employing a commercial converter, and comparing the results with other control policies.
- 1 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-10
Remaining Useful Life Estimation for LFP Cells in Second-Life Applications
The increasing deployment of battery storage applications in both grid storage and electric vehicle fields is generating a vast used battery market. These batteries are typically recycled but could be reused in second-life applications. One of the challenges is to obtain an accurate remaining useful life (RUL) estimation algorithm, which determines whether a battery is suitable for reuse and estimates the number of second-life cycles the battery will last. In this article, the RUL estimation problem is considered. We propose several health indicators (HIs), some of which have not been explored before, along with simple yet effective estimation and classification algorithms. These algorithms include classification techniques such as regularized logistic regression (RLR), and regression techniques such as multivariable linear regression (MLR) and multilayer perceptron (MLP). As a more advanced solution, a multiple expert system combining said techniques is proposed. The performance of the algorithms and features is evaluated on a recent lithium iron phosphate (LFP) data set from Toyota Research Institute. We obtain satisfactory results in the estimation of RUL cycles with errors down to 49 root mean square error (RMSE) cycles for cells that live up to 1200 cycles, and 0.24% mean relative error (MRE) for the prediction of the evolution of capacity.
- 1 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-10
Remaining Useful Life Estimation for LFP Cells in Second-Life Applications
The increasing deployment of battery storage applications in both grid storage and electric vehicle fields is generating a vast used battery market. These batteries are typically recycled but could be reused in second-life applications. One of the challenges is to obtain an accurate remaining useful life (RUL) estimation algorithm, which determines whether a battery is suitable for reuse and estimates the number of second-life cycles the battery will last. In this article, the RUL estimation problem is considered. We propose several health indicators (HIs), some of which have not been explored before, along with simple yet effective estimation and classification algorithms. These algorithms include classification techniques such as regularized logistic regression (RLR), and regression techniques such as multivariable linear regression (MLR) and multilayer perceptron (MLP). As a more advanced solution, a multiple expert system combining said techniques is proposed. The performance of the algorithms and features is evaluated on a recent lithium iron phosphate (LFP) data set from Toyota Research Institute. We obtain satisfactory results in the estimation of RUL cycles with errors down to 49 root mean square error (RMSE) cycles for cells that live up to 1200 cycles, and 0.24% mean relative error (MRE) for the prediction of the evolution of capacity.
- Open Access
Partial State-of-Charge Mitigation in Standalone Photovoltaic Hybrid Storage Systems
Energy Storage in photovoltaic installations has increased in popularity in recent years due to the improvement in solar panel technology and energy storage systems. In several places where the grid is not available, in remote isolated rural locations or developing countries, isolated photovoltaic installations are one of the main options to power DC micro-grids. In these scenarios, energy storage elements are mandatory due to the natural day-night cycles and low irradiation periods. Traditionally, lead-acid batteries have been responsible for this task, due to their availability and low cost. However, the intermittent features of the solar irradiance patterns and load demand, generate multiple shallow charge–discharge cycles or high power pulses, which worsen the performance of these batteries. Some Hybrid Energy Storage Systems (HESSs) have been reported in the literature to enhance the lifetime and power capabilities of these storage elements, but they are not intended to overcome the Partial State of Charge (PSoC) issue caused by daily cycles, which has an effect on the short and mid-term performance of the system. This paper studies the impact of the already proposed HESSs on PSoC operation, establishing the optimal hybrid ratios, and implementing them in a real installation with a satisfactory outcome.
Open AccessPartial State-of-Charge Mitigation in Standalone Photovoltaic Hybrid Storage Systems
Energy Storage in photovoltaic installations has increased in popularity in recent years due to the improvement in solar panel technology and energy storage systems. In several places where the grid is not available, in remote isolated rural locations or developing countries, isolated photovoltaic installations are one of the main options to power DC micro-grids. In these scenarios, energy storage elements are mandatory due to the natural day-night cycles and low irradiation periods. Traditionally, lead-acid batteries have been responsible for this task, due to their availability and low cost. However, the intermittent features of the solar irradiance patterns and load demand, generate multiple shallow charge–discharge cycles or high power pulses, which worsen the performance of these batteries. Some Hybrid Energy Storage Systems (HESSs) have been reported in the literature to enhance the lifetime and power capabilities of these storage elements, but they are not intended to overcome the Partial State of Charge (PSoC) issue caused by daily cycles, which has an effect on the short and mid-term performance of the system. This paper studies the impact of the already proposed HESSs on PSoC operation, establishing the optimal hybrid ratios, and implementing them in a real installation with a satisfactory outcome.