Juan Ramírez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Juan Ramírez has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Braulio Insuasty
Heterocyclic Compounds Research Group, Department of Chemistry Universidad del Valle Cali Colombia
5 shared publications - Jairo Quiroga
Heterocyclic Compounds Research Group, Department of Chemistry, Universidad del Valle, Cali 760032, Colombia
4 shared publications - Justo Cobo
Departamento de Química Inorgánica y Orgánica, Universidad de Jaén, Spain
3 shared publications - Marianny Yajaira Combariza
Escuela de Química, Universidad Industrial de Santander, Bucaramanga, Colombia
3 shared publications Rodrigo Abonia
Grupo de Investigación de Compuestos Heterocíclicos, Departamento de Química, Universidad del Valle, A. A. 25360 Cali, Colombia
3 shared publicationsCristian Blanco-Tirado
Escuela de Quimica, Universidad Industrial de Santander, Bucaramanga 680003, Santander, Colombia
2 shared publications
Latest Publications
- Open Access
- 30 December 2024
- Published by Instituto Colombiano del Petroleo in Ct&f - Ciencia, Tecnología Y Futuro
- Vol. 14 (2) , 29-44
Structural insights of asphaltenes through mild oxidation reactions and MID infrared spectroscopy
Mild oxidation reactions were induced over four different asphaltenes. Oxidation products were characterized via infrared spectroscopy to propose structural descriptors, taking advantage of the high sensitivity for detecting carbon oxygen vibrations in the infrared spectrum. Although no quantification over functional groups was performed, a good comparison between feedstock and products was achieved, after de-convoluting the FTIR spectra. It was confirmed that methyl groups are useful moieties on tracing the position of alkyl topologies over the n-heptane insoluble structures throughout oxidation reactions, as oxidation is more suitable on α-H of side alkyl chains. Considering this, it was inferred that the esters were the main functional groups formed under such oxidation conditions. The formation of lactones over aromatic nuclei was monitored through the slope of a parity plot with band intensity ranging between 1730cm-1 and 1230cm-1. TGA-MS and 1H-NMR analysis of raw n-heptane insolubles rendered valuable complementary information to confirm the structural attributes of the samples obtained by FTIR. The results from this research prove that handling oxidation selectivity over such complex hydrocarbon mixtures could have broader relevance for structural characterization purposes.
- 30 December 2024
- Published by Instituto Colombiano del Petroleo in Ct&f - Ciencia, Tecnología Y Futuro
- Vol. 14 (2) , 29-44
Open AccessStructural insights of asphaltenes through mild oxidation reactions and MID infrared spectroscopy
Mild oxidation reactions were induced over four different asphaltenes. Oxidation products were characterized via infrared spectroscopy to propose structural descriptors, taking advantage of the high sensitivity for detecting carbon oxygen vibrations in the infrared spectrum. Although no quantification over functional groups was performed, a good comparison between feedstock and products was achieved, after de-convoluting the FTIR spectra. It was confirmed that methyl groups are useful moieties on tracing the position of alkyl topologies over the n-heptane insoluble structures throughout oxidation reactions, as oxidation is more suitable on α-H of side alkyl chains. Considering this, it was inferred that the esters were the main functional groups formed under such oxidation conditions. The formation of lactones over aromatic nuclei was monitored through the slope of a parity plot with band intensity ranging between 1730cm-1 and 1230cm-1. TGA-MS and 1H-NMR analysis of raw n-heptane insolubles rendered valuable complementary information to confirm the structural attributes of the samples obtained by FTIR. The results from this research prove that handling oxidation selectivity over such complex hydrocarbon mixtures could have broader relevance for structural characterization purposes.
- Open Access
- 16 December 2022
- Published by Universidad del Valle
Espectrometría de masas. Interpretación de espectros
Desde la introducción del primer espectrómetro de masas en el año 1912 por el físico inglés J. J. Thomson, la espectrometría de masas surgió como una técnica esencial donde los átomos o moléculas presentes en una muestra problema son ionizados, separados e identificados acorde a su relación masa-carga. Actualmente, la variedad de espectrómetros de masas hace que esta técnica se considere esencial en bioquímica, ciencia de los materiales, química orgánica, medicina, industria petrolera, agropecuaria y farmacéutica. Una de las ventajas significativas de la espectrometría de masas es la cantidad de muestra necesaria para realizar un experimento; algunos equipos convencionales exhiben límites de detección en el orden de los femtomolar, pudiendo detectar especies en concentraciones muy bajas. Adicionalmente, los espectros de masas brindan información sobre las características estructurales, composición elemental y perfil isotópico de los analitos. A lo largo de este libro se describen aspectos fundamentales de la espectrometría de masas y se realiza un análisis detallado de los mecanismos de fragmentación de diversos compuestos orgánicos —hidrocarburos, alcoholes, éteres, aminas, compuestos halogenados, compuestos carbonílicos y carboxílicos— empleando la técnica de impacto de electrones. Finalmente, se hace una breve descripción de la espectrometría de masas de desorción/ionización láser asistida por una matriz MALDI y algunas técnicas modernas de ionización.
- 16 December 2022
- Published by Universidad del Valle
Open AccessEspectrometría de masas. Interpretación de espectros
Desde la introducción del primer espectrómetro de masas en el año 1912 por el físico inglés J. J. Thomson, la espectrometría de masas surgió como una técnica esencial donde los átomos o moléculas presentes en una muestra problema son ionizados, separados e identificados acorde a su relación masa-carga. Actualmente, la variedad de espectrómetros de masas hace que esta técnica se considere esencial en bioquímica, ciencia de los materiales, química orgánica, medicina, industria petrolera, agropecuaria y farmacéutica. Una de las ventajas significativas de la espectrometría de masas es la cantidad de muestra necesaria para realizar un experimento; algunos equipos convencionales exhiben límites de detección en el orden de los femtomolar, pudiendo detectar especies en concentraciones muy bajas. Adicionalmente, los espectros de masas brindan información sobre las características estructurales, composición elemental y perfil isotópico de los analitos. A lo largo de este libro se describen aspectos fundamentales de la espectrometría de masas y se realiza un análisis detallado de los mecanismos de fragmentación de diversos compuestos orgánicos —hidrocarburos, alcoholes, éteres, aminas, compuestos halogenados, compuestos carbonílicos y carboxílicos— empleando la técnica de impacto de electrones. Finalmente, se hace una breve descripción de la espectrometría de masas de desorción/ionización láser asistida por una matriz MALDI y algunas técnicas modernas de ionización.
- 12 March 2019
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 33 (5) , 3899-3907
Comprehensive Petroporphyrin Identification in Crude Oils Using Highly Selective Electron Transfer Reactions in MALDI-FTICR-MS
- 12 March 2019
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 33 (5) , 3899-3907
Comprehensive Petroporphyrin Identification in Crude Oils Using Highly Selective Electron Transfer Reactions in MALDI-FTICR-MS
- 22 February 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (11) , 10975-10987
Electron-Transfer Ionization of Nanoparticles, Polymers, Porphyrins, and Fullerenes Using Synthetically Tunable α-Cyanophenylenevinylenes as UV MALDI-MS Matrices
Electron transfer (ET) ionization in MALDI is widely used for the analysis of functional materials which are labile, unstable and reactive in nature. However, conventional ET matrices (e.g. DCTB) still lack in performance due to cluster formation, reactivity with analytes and vacuum instability. In this contribution we report the use of α-cyano-phenylenevinylene derivatives as UV-MALDI matrices for the analysis, by ET ionization, of nanoparticles, polymers, porphyrins and fullerenes. The synthetic versatility of the phenylenevinylene (PV) core allowed us to modulate physicochemical properties, fundamental for efficient formation of primary ions in the gas phase under MALDI conditions, such as planarity, ionization potentials, molar absorptivity and laser thresholds. For instance, introduction of -CN groups in vinyl positions of the PV core induced structural disruption in planarity in the new α-CNPV derivatives, shifting their maximum molar absorptivity to UV wavelengths, and increasing their ionization energy values above 8.0 eV. UV MALDI-relevant photophysical properties in solution and solid state are reported (λmax and ε 355nm). LDI spectra of α-CNPVs exhibit predominantly signals due to M+• and [M+H]+ species, while the standard matrix DCTB show peaks associated with clusters and non-desirable products. The MS performance of six α-CNPV derivatives was assessed for the ionization of a standard compound, with α-CNPV-CH3 and α-CNPV-OCH3 exhibiting better analytical figures of merit than those of DCTB. These new matrices display high vacuum stability (79%) for up to 240 minutes of residence in the ionization source, in contrast with DCTB with 13%. Vacuum stability is vital, particularly for applications such as high-throughput analysis and imaging MS. In addition, when a mixture of twenty analytes (PAHs, porphyrins and triphenylamine dyes) ranging from m/z 300 to 1700 was analyzed via ET MALDI, we observe analyte coverage of 90% with the α-CNPV-CH3 derivative, while DCTB afforded only 70%. Finally, α-CNPV-CH3 was tested, and compared with DCTB, as ET-MALDI matrix for petroporphyrins, conjugated polymers, gold nanoparticles, and fullerene derivatives analysis, outperforming in most cases the standard matrix.
- 22 February 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (11) , 10975-10987
Electron-Transfer Ionization of Nanoparticles, Polymers, Porphyrins, and Fullerenes Using Synthetically Tunable α-Cyanophenylenevinylenes as UV MALDI-MS Matrices
Electron transfer (ET) ionization in MALDI is widely used for the analysis of functional materials which are labile, unstable and reactive in nature. However, conventional ET matrices (e.g. DCTB) still lack in performance due to cluster formation, reactivity with analytes and vacuum instability. In this contribution we report the use of α-cyano-phenylenevinylene derivatives as UV-MALDI matrices for the analysis, by ET ionization, of nanoparticles, polymers, porphyrins and fullerenes. The synthetic versatility of the phenylenevinylene (PV) core allowed us to modulate physicochemical properties, fundamental for efficient formation of primary ions in the gas phase under MALDI conditions, such as planarity, ionization potentials, molar absorptivity and laser thresholds. For instance, introduction of -CN groups in vinyl positions of the PV core induced structural disruption in planarity in the new α-CNPV derivatives, shifting their maximum molar absorptivity to UV wavelengths, and increasing their ionization energy values above 8.0 eV. UV MALDI-relevant photophysical properties in solution and solid state are reported (λmax and ε 355nm). LDI spectra of α-CNPVs exhibit predominantly signals due to M+• and [M+H]+ species, while the standard matrix DCTB show peaks associated with clusters and non-desirable products. The MS performance of six α-CNPV derivatives was assessed for the ionization of a standard compound, with α-CNPV-CH3 and α-CNPV-OCH3 exhibiting better analytical figures of merit than those of DCTB. These new matrices display high vacuum stability (79%) for up to 240 minutes of residence in the ionization source, in contrast with DCTB with 13%. Vacuum stability is vital, particularly for applications such as high-throughput analysis and imaging MS. In addition, when a mixture of twenty analytes (PAHs, porphyrins and triphenylamine dyes) ranging from m/z 300 to 1700 was analyzed via ET MALDI, we observe analyte coverage of 90% with the α-CNPV-CH3 derivative, while DCTB afforded only 70%. Finally, α-CNPV-CH3 was tested, and compared with DCTB, as ET-MALDI matrix for petroporphyrins, conjugated polymers, gold nanoparticles, and fullerene derivatives analysis, outperforming in most cases the standard matrix.
- 1 March 2015
- Published by Elsevier in European Journal of Medicinal Chemistry
- Vol. 92, 866-875
Synthesis of novel thiazole-based 8,9-dihydro-7H-pyrimido[4,5-b][1,4]diazepines as potential antitumor and antifungal agents
- 1 March 2015
- Published by Elsevier in European Journal of Medicinal Chemistry
- Vol. 92, 866-875
Synthesis of novel thiazole-based 8,9-dihydro-7H-pyrimido[4,5-b][1,4]diazepines as potential antitumor and antifungal agents
- 4 June 2014
- Published by Wiley in Archiv der Pharmazie
- Vol. 347 (8) , 566-575
Efficient Synthesis of Novel 3‐Aryl‐5‐(4‐chloro‐2‐morpholinothiazol‐5‐yl)‐4,5‐dihydro‐1H‐pyrazoles and Their Antifungal Activity Alone and in Combination with Commercial Antifungal Agents
The α,β‐unsaturated carbonyl compounds 5a–f were prepared by reaction between 2‐chloro‐4‐morpholinothiazol‐5‐carbaldehyde 3 and substituted acetophenones 4a–f. Treatment of compounds 5a–f with hydrazine hydrate employing mild reaction conditions led to the formation of 4,5‐dihydro‐1H‐pyrazoles 6a–f. Then the treatment with acetic anhydride or formic acid afforded the expected 4,5‐dihydro‐1H‐pyrazoles 7a–f and 8a–f. The antifungal activity of each series of synthesized compounds was determined against the clinically important fungi Candida albicans and Cryptococcus neoformans. In addition, the most active compounds 7e and 7f were tested in combination with the commercial antifungal agents: fluconazole, itraconazole, and amphotericin B. Compound 7e showed a synergistic effect with fluconazole against C. albicans while 7f showed synergistic activities with all tested antifungal drugs against the same yeast.
- 4 June 2014
- Published by Wiley in Archiv der Pharmazie
- Vol. 347 (8) , 566-575
Efficient Synthesis of Novel 3‐Aryl‐5‐(4‐chloro‐2‐morpholinothiazol‐5‐yl)‐4,5‐dihydro‐1H‐pyrazoles and Their Antifungal Activity Alone and in Combination with Commercial Antifungal Agents
The α,β‐unsaturated carbonyl compounds 5a–f were prepared by reaction between 2‐chloro‐4‐morpholinothiazol‐5‐carbaldehyde 3 and substituted acetophenones 4a–f. Treatment of compounds 5a–f with hydrazine hydrate employing mild reaction conditions led to the formation of 4,5‐dihydro‐1H‐pyrazoles 6a–f. Then the treatment with acetic anhydride or formic acid afforded the expected 4,5‐dihydro‐1H‐pyrazoles 7a–f and 8a–f. The antifungal activity of each series of synthesized compounds was determined against the clinically important fungi Candida albicans and Cryptococcus neoformans. In addition, the most active compounds 7e and 7f were tested in combination with the commercial antifungal agents: fluconazole, itraconazole, and amphotericin B. Compound 7e showed a synergistic effect with fluconazole against C. albicans while 7f showed synergistic activities with all tested antifungal drugs against the same yeast.
- 6 May 2014
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section C Structural Chemistry
- Vol. 70 (6) , 536-540
(8RS)-4-Amino-6-(4-chlorophenyl)-8-(2,4-dichlorothiazol-5-yl)-8,9-dihydro-7H-pyrimido[4,5-b][1,4]diazepineN,N-dimethylformamide monosolvate: sheets built from N—H...N and C—H...O hydrogen bonds
In the title compound, C16H11Cl3N6S·C3H7NO, the seven-membered ring adopts a conformation which is close to the twist-boat form. The molecular components are linked into sheets by a combination of two N—H...N hydrogen bonds and two C—H...O hydrogen bonds. Comparisons are made with other aminopyrimidine derivatives.
- 6 May 2014
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section C Structural Chemistry
- Vol. 70 (6) , 536-540
(8RS)-4-Amino-6-(4-chlorophenyl)-8-(2,4-dichlorothiazol-5-yl)-8,9-dihydro-7H-pyrimido[4,5-b][1,4]diazepineN,N-dimethylformamide monosolvate: sheets built from N—H...N and C—H...O hydrogen bonds
In the title compound, C16H11Cl3N6S·C3H7NO, the seven-membered ring adopts a conformation which is close to the twist-boat form. The molecular components are linked into sheets by a combination of two N—H...N hydrogen bonds and two C—H...O hydrogen bonds. Comparisons are made with other aminopyrimidine derivatives.
- Open Access
Synthesis, Antifungal and Antitumor Activity of Novel (Z)-5-Hetarylmethylidene-1,3-thiazol-4-ones and (Z)-5-Ethylidene-1,3-thiazol-4-ones
New hetaryl- and alkylidenerhodanine derivatives 3a–d, 3e, and 4a–d were prepared from heterocyclic aldehydes 1a–d or acetaldehyde 1e. The treatment of several rhodanine derivatives 3a–d and 3e with piperidine or morpholine in THF under reflux, afforded (Z)-5-(hetarylmethylidene)-2-(piperidin-1-yl)thiazol-4(5H)-ones and 2-morpholinothiazol-4(5H)-ones 5a–d, 6a–d, and (Z)-5-ethylidene-2-morpholinothiazol-4(5H)-one (5e), respectively, in good yields. Structures of all compounds were determined by IR, 1D and 2D NMR and mass spectrometry. Several of these compounds were screened by the U.S. National Cancer Institute (NCI) to assess their antitumor activity against 60 different human tumor cell lines. Compound 3c showed high activity against HOP-92 (Non-Small Cell Lung Cancer), which was the most sensitive cell line, with GI50 = 0.62 μM and LC50 > 100 μM from the in vitro assays. In vitro antifungal activity of these compounds was also determined against 10 fungal strains. Compound 3e showed activity against all fungal strains tested, but showed high activity against Saccharomyces cerevisiae (MIC 3.9 μg/mL).
Open AccessSynthesis, Antifungal and Antitumor Activity of Novel (Z)-5-Hetarylmethylidene-1,3-thiazol-4-ones and (Z)-5-Ethylidene-1,3-thiazol-4-ones
New hetaryl- and alkylidenerhodanine derivatives 3a–d, 3e, and 4a–d were prepared from heterocyclic aldehydes 1a–d or acetaldehyde 1e. The treatment of several rhodanine derivatives 3a–d and 3e with piperidine or morpholine in THF under reflux, afforded (Z)-5-(hetarylmethylidene)-2-(piperidin-1-yl)thiazol-4(5H)-ones and 2-morpholinothiazol-4(5H)-ones 5a–d, 6a–d, and (Z)-5-ethylidene-2-morpholinothiazol-4(5H)-one (5e), respectively, in good yields. Structures of all compounds were determined by IR, 1D and 2D NMR and mass spectrometry. Several of these compounds were screened by the U.S. National Cancer Institute (NCI) to assess their antitumor activity against 60 different human tumor cell lines. Compound 3c showed high activity against HOP-92 (Non-Small Cell Lung Cancer), which was the most sensitive cell line, with GI50 = 0.62 μM and LC50 > 100 μM from the in vitro assays. In vitro antifungal activity of these compounds was also determined against 10 fungal strains. Compound 3e showed activity against all fungal strains tested, but showed high activity against Saccharomyces cerevisiae (MIC 3.9 μg/mL).