Jorge Ivan Marin-Hurtado
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jorge Ivan Marin-Hurtado has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
David V. Anderson
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, 30332, USA
5 shared publicationsAlexander Amaya Suarez
Electronics Engineering Program Universidad del Quindío Armenia, Colombia
1 shared publicationAntonio Ramos Murillo
Departamento de Ingeniería Eléctrica Universidad Tecnológica de Pereira Pereira, Colombia
1 shared publicationD.V. Anderson
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, 30332
1 shared publicationDevangi N. Parikh
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
1 shared publicationElkyn Alexander Belalcazar Bolanos
Electronics Engineering Program Universidad de Antioquia Medellín, Colombia
1 shared publication
Latest Publications
- 27 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Low-Cost IoT-Based Monitoring System for Hydroponic Crops
This paper describes an low-cost real-time monitoring system for hydroponic crops, based on IoT, allowing real-time acquisition and visualization of essential physicalchemical variables such as $\mathbf{p H}$, electrical conductivity (EC), temperature, humidity, and nutrient levels (NPK). Nitrogen (N), phosphorus (P), and potassium (K). It uses an ESP32 microcontroller and specialized sensors with wireless connectivity, enabling remote supervision through a web platform. Its portability and scalability optimize costs and resources, allowing its use in multiple crops without requiring multiple devices. In addition to improving agricultural efficiency, it contributes to sustainability by reducing the indiscriminate use of water and fertilizers, mitigating environmental impact. This project aims to promote hydroponics as an alternative to soil degradation and deforestation, fostering a more efficient and accessible food production model.- 27 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Low-Cost IoT-Based Monitoring System for Hydroponic Crops
This paper describes an low-cost real-time monitoring system for hydroponic crops, based on IoT, allowing real-time acquisition and visualization of essential physicalchemical variables such as $\mathbf{p H}$, electrical conductivity (EC), temperature, humidity, and nutrient levels (NPK). Nitrogen (N), phosphorus (P), and potassium (K). It uses an ESP32 microcontroller and specialized sensors with wireless connectivity, enabling remote supervision through a web platform. Its portability and scalability optimize costs and resources, allowing its use in multiple crops without requiring multiple devices. In addition to improving agricultural efficiency, it contributes to sustainability by reducing the indiscriminate use of water and fertilizers, mitigating environmental impact. This project aims to promote hydroponics as an alternative to soil degradation and deforestation, fostering a more efficient and accessible food production model.- 27 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Prototype of an Embedded Electrical Impedance Tomography System for Coffee Bean Evaluation
This paper presents the development of a low-cost, embedded Electrical Impedance Tomography (EIT) system for the non-invasive evaluation of coffee beans. The system includes a 3D-printed chamber with eight stainless steel electrodes, an analog front-end based on an ESP32 SoC, and a Python-based graphical interface. developed in Python using the PyEIT library for real-time image reconstruction. The architecture prioritizes modularity and affordability, making it suitable for research and educational contexts. Functional tests confirm the stability and coherence of the measurements, and the reconstructed images reveal impedance variations across the sample. This prototype lays the groundwork for future agro-industrial applications in quality assessment using EIT technology.
- 27 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Prototype of an Embedded Electrical Impedance Tomography System for Coffee Bean Evaluation
This paper presents the development of a low-cost, embedded Electrical Impedance Tomography (EIT) system for the non-invasive evaluation of coffee beans. The system includes a 3D-printed chamber with eight stainless steel electrodes, an analog front-end based on an ESP32 SoC, and a Python-based graphical interface. developed in Python using the PyEIT library for real-time image reconstruction. The architecture prioritizes modularity and affordability, making it suitable for research and educational contexts. Functional tests confirm the stability and coherence of the measurements, and the reconstructed images reveal impedance variations across the sample. This prototype lays the groundwork for future agro-industrial applications in quality assessment using EIT technology.
- Open Access
- 24 September 2024
- Published by Asociacion Colombiana de Facultades de Ingenieriia (ACOFI) in Encuentro Internacional de Educación en Ingeniería
- p. 1-12
Planificación de espacios académicos orientados a proyectos en el marco CDIO para ingeniería en la Universidad del Quindío
La transformación de los espacios académicos del programa de Ingeniería Electrónica de la Universidad del Quindío, que están orientados a proyectos y dirigidos hacia la implementación del enfoque internacional de formación en ingeniería CDIO (Concebir, Diseñar, Implementar, Operar), se fundamentó en el rediseño y adaptación de los entornos de aprendizaje con el fin de facilitar un enfoque educativo que reflejara las demandas y desafíos del mundo real de la ingeniería. Para lograrlo, se incorporaron dos cursos denominados Proyecto CDIO 2 y 3 en la malla curricular del programa. Estos cursos constituyen el desarrollo de un proyecto de ingeniería durante un año. La planificación de estos cursos se basó en los resultados del aprendizaje del espacio académico, los resultados de aprendizaje de programa, y la alineación constructiva contemplada en el proyecto educativo de programa y el currículo integrado.La planificación para el desarrollo de los espacios académicos Proyecto CDIO 2 y 3 ha sido meticulosamente diseñada para alinear los entornos de aprendizaje con los resultados del aprendizaje deseado. El enfoque innovador adoptado para estos espacios académicos se basa en la reconfiguración de las estrategias metodológicas y la interacción estudiantil-profesor en el contexto de la Ingeniería Electrónica, lo cual garantiza que los estudiantes no sólo adquieran conocimientos teóricos, sino que también desarrollen habilidades prácticas y competencias esenciales para su futuro profesional. En este sentido, los espacios académicos trascienden del ejercicio tradicional que se desarrolla en el aula o laboratorio para convertirse en incubadoras de innovación y pensamiento crítico. Asimismo, el currículo integrado desempeñó un papel fundamental en este proceso de transformación. Al interconectar diferentes disciplinas y áreas de estudio, se fomenta un ambiente de aprendizaje multidimensional, donde los estudiantes pueden ver y experimentar de primera mano la interrelación entre diversos campos del conocimiento. Esta integración curricular es clave para preparar a los estudiantes para los retos multidisciplinarios del mundo real.El rediseño de estos espacios, por lo tanto, no es solo una remodelación física, sino una visión de cómo la enseñanza y el aprendizaje de la ingeniería electrónica pueden y deben ocurrir en el siglo XXI, con el objetivo de preparar a los estudiantes para afrontar los retos futuros y capacitarlos para ser los arquitectos de dicho futuro.
- 24 September 2024
- Published by Asociacion Colombiana de Facultades de Ingenieriia (ACOFI) in Encuentro Internacional de Educación en Ingeniería
- p. 1-12
Open AccessPlanificación de espacios académicos orientados a proyectos en el marco CDIO para ingeniería en la Universidad del Quindío
La transformación de los espacios académicos del programa de Ingeniería Electrónica de la Universidad del Quindío, que están orientados a proyectos y dirigidos hacia la implementación del enfoque internacional de formación en ingeniería CDIO (Concebir, Diseñar, Implementar, Operar), se fundamentó en el rediseño y adaptación de los entornos de aprendizaje con el fin de facilitar un enfoque educativo que reflejara las demandas y desafíos del mundo real de la ingeniería. Para lograrlo, se incorporaron dos cursos denominados Proyecto CDIO 2 y 3 en la malla curricular del programa. Estos cursos constituyen el desarrollo de un proyecto de ingeniería durante un año. La planificación de estos cursos se basó en los resultados del aprendizaje del espacio académico, los resultados de aprendizaje de programa, y la alineación constructiva contemplada en el proyecto educativo de programa y el currículo integrado.La planificación para el desarrollo de los espacios académicos Proyecto CDIO 2 y 3 ha sido meticulosamente diseñada para alinear los entornos de aprendizaje con los resultados del aprendizaje deseado. El enfoque innovador adoptado para estos espacios académicos se basa en la reconfiguración de las estrategias metodológicas y la interacción estudiantil-profesor en el contexto de la Ingeniería Electrónica, lo cual garantiza que los estudiantes no sólo adquieran conocimientos teóricos, sino que también desarrollen habilidades prácticas y competencias esenciales para su futuro profesional. En este sentido, los espacios académicos trascienden del ejercicio tradicional que se desarrolla en el aula o laboratorio para convertirse en incubadoras de innovación y pensamiento crítico. Asimismo, el currículo integrado desempeñó un papel fundamental en este proceso de transformación. Al interconectar diferentes disciplinas y áreas de estudio, se fomenta un ambiente de aprendizaje multidimensional, donde los estudiantes pueden ver y experimentar de primera mano la interrelación entre diversos campos del conocimiento. Esta integración curricular es clave para preparar a los estudiantes para los retos multidisciplinarios del mundo real.El rediseño de estos espacios, por lo tanto, no es solo una remodelación física, sino una visión de cómo la enseñanza y el aprendizaje de la ingeniería electrónica pueden y deben ocurrir en el siglo XXI, con el objetivo de preparar a los estudiantes para afrontar los retos futuros y capacitarlos para ser los arquitectos de dicho futuro.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Multichannel Wiener filter method for noise reduction in reverberant environments for binaural hearing aids
Binaural hearing aids have been recognized as the most optimal strategy to improve hearing in people with hearing impairment in both ears. In this sense, to improve hearing in noisy environments, binaural methods outperform monaural methods with respect to noise reduction, speech intelligibility and sound quality. Among binaural noise-reduction methods, multichannel Wiener filters (MWF) have shown to be the most promising techniques for binaural hearing aids. The latter due to its good performance in noisy environments and the feasibility to be implemented in ultra-low power embedded devices. However, existing MWF methods have been proposed and tested assuming non-reverberant environments. Since reverberation is a common effect in virtually all everyday environments, existing MWF methods have shown a significant performance degradation in these environments. Therefore, it is required to explore alternative MWF-based methods to efficiently reduce noise in reverberant environments. This paper presents a review of different reduction techniques based on MWF for reverberant noise environments and proposes a new MWF technique to improve existing methods.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Multichannel Wiener filter method for noise reduction in reverberant environments for binaural hearing aids
Binaural hearing aids have been recognized as the most optimal strategy to improve hearing in people with hearing impairment in both ears. In this sense, to improve hearing in noisy environments, binaural methods outperform monaural methods with respect to noise reduction, speech intelligibility and sound quality. Among binaural noise-reduction methods, multichannel Wiener filters (MWF) have shown to be the most promising techniques for binaural hearing aids. The latter due to its good performance in noisy environments and the feasibility to be implemented in ultra-low power embedded devices. However, existing MWF methods have been proposed and tested assuming non-reverberant environments. Since reverberation is a common effect in virtually all everyday environments, existing MWF methods have shown a significant performance degradation in these environments. Therefore, it is required to explore alternative MWF-based methods to efficiently reduce noise in reverberant environments. This paper presents a review of different reduction techniques based on MWF for reverberant noise environments and proposes a new MWF technique to improve existing methods.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 71 (23296232) , 1-5
Improving kinematic lab practices by image processing
Several studies, including the most recent report of the Program for International Students Assessment, accompanied by the annual measurements by the Colombian Institute for Education Evaluation ICFES (for its acronym in Spanish: Instituto Colombiano para la Evaluación de la Educación) agree an obvious deficiency of students tested, both in the apprehension of different knowledge areas, as well as their skills and competences to solve problems on daily situations. Given this weakness and taken into account the relevance of incorporating Information Technology and Communications (ICT) in the teaching process, we develop a software that supported on the Kinect™ sensor, captures images from certain physics lab experiments. This application also extracts information from the real-time experiment to generate an interface in Augmented Reality (AR) that visualizes some specific physical parameters.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 71 (23296232) , 1-5
Improving kinematic lab practices by image processing
Several studies, including the most recent report of the Program for International Students Assessment, accompanied by the annual measurements by the Colombian Institute for Education Evaluation ICFES (for its acronym in Spanish: Instituto Colombiano para la Evaluación de la Educación) agree an obvious deficiency of students tested, both in the apprehension of different knowledge areas, as well as their skills and competences to solve problems on daily situations. Given this weakness and taken into account the relevance of incorporating Information Technology and Communications (ICT) in the teaching process, we develop a software that supported on the Kinect™ sensor, captures images from certain physics lab experiments. This application also extracts information from the real-time experiment to generate an interface in Augmented Reality (AR) that visualizes some specific physical parameters.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Pattern recognition of hypernasality in voice of patients with Cleft and Lip Palate
The Cleft and Lip Palate (CLP) is a malformation with high recurrence in Colombia, which affects the ability of the phonation system, making difficult the effective communication of the patient. This research seeks to find patterns that enable to detect hypernasality without using invasive diagnostic methods. We performed an analysis of a large range of acoustic features to identify those capable of discriminating hypernasality. The analyzed features include: Teager energy operator (TEO), linear predictive coding (LPC), Mel Frequency Cepstral Coefficients (MFCC), Pitch, Jitter, Shimmer, and the first three formants together with the bandwidth of the first formant. With the correct configuration is achieved discriminant patterns classify 99 percent of patients hypernasal of the database with a false positive rate of less than 1 percent of healthy patients, which are promising results as a starting point for creating a tool for automatic noninvasive detection of hypernasality.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Pattern recognition of hypernasality in voice of patients with Cleft and Lip Palate
The Cleft and Lip Palate (CLP) is a malformation with high recurrence in Colombia, which affects the ability of the phonation system, making difficult the effective communication of the patient. This research seeks to find patterns that enable to detect hypernasality without using invasive diagnostic methods. We performed an analysis of a large range of acoustic features to identify those capable of discriminating hypernasality. The analyzed features include: Teager energy operator (TEO), linear predictive coding (LPC), Mel Frequency Cepstral Coefficients (MFCC), Pitch, Jitter, Shimmer, and the first three formants together with the bandwidth of the first formant. With the correct configuration is achieved discriminant patterns classify 99 percent of patients hypernasal of the database with a false positive rate of less than 1 percent of healthy patients, which are promising results as a starting point for creating a tool for automatic noninvasive detection of hypernasality.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 84-91
Practical MWF-based noise-reduction methods for binaural hearing aids
Most hearing impaired people suffer from hearing loss in both ears, which is called a binaural hearing loss. To deal with these hearing losses, independent hearing aids have been typically used. However, psycho-acoustical studies using these prescriptions show that under hostile environments, e.g., babble noise at low SNR, people with a binaural hearing loss report an uncomfortable sound. In this sense, new generation hearing aids, called binaural hearing aids, have been proposed to include a wireless link to exchange information between both hearing devices. Although different noise-reduction methods have been proposed to be used in binaural hearing aids, they are impractical due to their hardware requirements such as computational complexity and wireless transmission bandwidth. In this paper, we propose binaural noise-reduction strategies based on multichannel Wiener filter (MWF) that reduces computational complexity and transmission bandwidth. The proposed strategy is compared to other existing MWF method, showing that our proposed method provides significant advantages.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 84-91
Practical MWF-based noise-reduction methods for binaural hearing aids
Most hearing impaired people suffer from hearing loss in both ears, which is called a binaural hearing loss. To deal with these hearing losses, independent hearing aids have been typically used. However, psycho-acoustical studies using these prescriptions show that under hostile environments, e.g., babble noise at low SNR, people with a binaural hearing loss report an uncomfortable sound. In this sense, new generation hearing aids, called binaural hearing aids, have been proposed to include a wireless link to exchange information between both hearing devices. Although different noise-reduction methods have been proposed to be used in binaural hearing aids, they are impractical due to their hardware requirements such as computational complexity and wireless transmission bandwidth. In this paper, we propose binaural noise-reduction strategies based on multichannel Wiener filter (MWF) that reduces computational complexity and transmission bandwidth. The proposed strategy is compared to other existing MWF method, showing that our proposed method provides significant advantages.
- 9 December 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Audio, Speech, and Language Processing
- Vol. 20 (4) , 1372-1382
Perceptually Inspired Noise-Reduction Method for Binaural Hearing Aids
Different noise-reduction methods have been proposed in the literature for single and multiple-microphone applications. For binaural hearing aids, multiple-microphone noise-reduction methods offer two significant psycho-acoustical advantages with respect to the single-microphone methods. First, noise reduction strategies based on binaural processing (processing using the information received at the left and right ear) are more effective than using independent monaural processing because of the added information. Second, there is an user preference for noise reduction methods that preserve localization cues of both target and interfering signals. Although different multiple-microphone noise-reduction techniques have been proposed in the literature, only a small set is able to preserve the localization cues for both target and interfering signals. This paper proposes a binaural noise-reduction method that preserves the localization cues for both target and interfering signals. The proposed method is based on blind source separation (BSS) followed by a postprocessing technique inspired by a human auditory model. The performance of the proposed method is analyzed using objective and subjective measurements, and compared to existing binaural noise-reduction methods based on BSS and multichannel Wiener filter (MWF). Results show that for some scenarios and conditions, the proposed method outperforms on average the existing methods in terms of noise reduction and provides nearly similar sound quality.
- 9 December 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Audio, Speech, and Language Processing
- Vol. 20 (4) , 1372-1382
Perceptually Inspired Noise-Reduction Method for Binaural Hearing Aids
Different noise-reduction methods have been proposed in the literature for single and multiple-microphone applications. For binaural hearing aids, multiple-microphone noise-reduction methods offer two significant psycho-acoustical advantages with respect to the single-microphone methods. First, noise reduction strategies based on binaural processing (processing using the information received at the left and right ear) are more effective than using independent monaural processing because of the added information. Second, there is an user preference for noise reduction methods that preserve localization cues of both target and interfering signals. Although different multiple-microphone noise-reduction techniques have been proposed in the literature, only a small set is able to preserve the localization cues for both target and interfering signals. This paper proposes a binaural noise-reduction method that preserves the localization cues for both target and interfering signals. The proposed method is based on blind source separation (BSS) followed by a postprocessing technique inspired by a human auditory model. The performance of the proposed method is analyzed using objective and subjective measurements, and compared to existing binaural noise-reduction methods based on BSS and multichannel Wiener filter (MWF). Results show that for some scenarios and conditions, the proposed method outperforms on average the existing methods in terms of noise reduction and provides nearly similar sound quality.
- 1 October 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 85-88
Reduced-bandwidth and low-complexity multichannel wiener filter for binaural hearing aids
Binaural hearing aids use a wireless link to exchange the signals received at each side, allowing the implementation of sophisticated noise-reduction strategies. Although different noise-reduction strategies have been reported for binaural hearing aids, those based on Multichannel Wiener filter (MWF) have been identified to provide the best SNR improvement and output sound quality. The real-time implementation of these MWF techniques involves different challenges such as reduction of computational complexity, processing delay, and transmission bandwidth, among others. The MWF methods have been generally derived in the FFT domain. This paper explores a different approach, where the FFT is replaced by an auditory representation. For this representation, two strategies are analyzed: IIR filter-banks and wavelet packets (WP). The WP representation is shown to provide reduction of the computational complexity, processing delay, and transmission bandwidth, without degrading the performance of SNR improvement and sound quality.
- 1 October 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 85-88
Reduced-bandwidth and low-complexity multichannel wiener filter for binaural hearing aids
Binaural hearing aids use a wireless link to exchange the signals received at each side, allowing the implementation of sophisticated noise-reduction strategies. Although different noise-reduction strategies have been reported for binaural hearing aids, those based on Multichannel Wiener filter (MWF) have been identified to provide the best SNR improvement and output sound quality. The real-time implementation of these MWF techniques involves different challenges such as reduction of computational complexity, processing delay, and transmission bandwidth, among others. The MWF methods have been generally derived in the FFT domain. This paper explores a different approach, where the FFT is replaced by an auditory representation. For this representation, two strategies are analyzed: IIR filter-banks and wavelet packets (WP). The WP representation is shown to provide reduction of the computational complexity, processing delay, and transmission bandwidth, without degrading the performance of SNR improvement and sound quality.
- 1 October 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19311168,p. 341-344
Robust non-vad implementation of Multichannel Wiener filter for binaural noise reduction
Binaural noise-reduction techniques based on Multichannel Wiener filter (MWF) are promising candidates to be used in binaural hearing aids. The real-time implementation of the existing MWF methods involves different challenges, e.g. the robustness against errors in the estimation of the second-order statistics. A typical approach in MWF to estimate these statistics has been the use of a voice activity detector (VAD). But a VAD-based estimation is not particularly suitable for low SNR scenarios, or to track the noise statistics in non-stationary environments during voiced segments. This paper proposes a non-VAD statistics estimation and a method to adapt the trade-off parameter in a well-known MWF method, SDW-MWF. The performance of the proposed implementation is analyzed under realistic scenarios. The proposed method outperforms a VAD-based implementation, is robust under low-SNR and non-stationary environments, and provides good speech quality.
- 1 October 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19311168,p. 341-344
Robust non-vad implementation of Multichannel Wiener filter for binaural noise reduction
Binaural noise-reduction techniques based on Multichannel Wiener filter (MWF) are promising candidates to be used in binaural hearing aids. The real-time implementation of the existing MWF methods involves different challenges, e.g. the robustness against errors in the estimation of the second-order statistics. A typical approach in MWF to estimate these statistics has been the use of a voice activity detector (VAD). But a VAD-based estimation is not particularly suitable for low SNR scenarios, or to track the noise statistics in non-stationary environments during voiced segments. This paper proposes a non-VAD statistics estimation and a method to adapt the trade-off parameter in a well-known MWF method, SDW-MWF. The performance of the proposed implementation is analyzed under realistic scenarios. The proposed method outperforms a VAD-based implementation, is robust under low-SNR and non-stationary environments, and provides good speech quality.