Dingran Dong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Dingran Dong has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Dong Sun
Department of Biomedical Engineering, City University of Hong Kong, Kowloon, Hong Kong, China
7 shared publications - Hongde Qin
Harbin Engineering University
3 shared publications - Liushuai Zheng
Department of Biomedical Engineering, City University of Hong Kong, Hong Kong
3 shared publications - Wahshing Lam
Department of Biomedical Engineering, City University of Hong Kong, Hong Kong
3 shared publications - Yuanjun Jia
China Academy of Electronics and Information Technology, Beijing 100041, China
3 shared publications - Dongfang Li
Department of Biomedical Engineering, City University of Hong Kong, Hong Kong
2 shared publications
Latest Publications
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 8215-8226
Automated Motion Control of a Microparticle Swarm in Liquids by a Single-Solenoid Electromagnetic Manipulation System
In recent years, magnetic field-controlled microparticles have demonstrated their superiority in biomedical applications. To improve the operation efficiency and imaging effect of microparticles, increasing numbers of researchers are devoted to driving a swarm composed of a group of microparticles. In this study, a new strategy for autonomously manipulating microparticle swarms in liquids via an electromagnetic coil system was investigated. Compared with the commonly used rotating magnetic field composed of multiple electromagnetic coils, the oscillating magnetic field drive system formed by a single electromagnetic coil reduces the occupied space meanwhile ensures the sufficient working space, making the microparticle movement more flexible while providing greater feasibility for good compatibility with imaging systems. Through designing the parameters of the input current, a vortex-shaped swarm can be formed, and the movement of the entire swarm can be pulled by controlling the coil position. Owing to the rotation of microparticles, the coefficient of the control input is unknown uncertainty. To solve this uncertainty problem, a sliding mode controller is used, and the chattering caused by the sliding mode surface is reduced using a saturation function. Lastly, the effectiveness of the proposed strategy is verified by simulation and experiments. Note to Practitioners —The motivation of this article is mainly to solve the problem of magnetic microparticle aggregation, aiming to form a stable swarm and automatically control the movement of the swarm. Most of the existing methods of aggregating microparticles to form a swarm are based on the creation of a rotating magnetic field by Helmholtz coils, which leads to the problem of spatial limitation. To solve this problem, this research uses one single solenoid to form a stable swarm, which provides more space for imaging equipment and objects requiring operation. The controlled movement of the stable swarm is achieved by manipulating the solenoid with a sliding mode controller. It reduces the impact of system uncertainties, allowing the swarm to automatically track a predefined path accurately. This will provide a new idea for the application of microparticles in the biomedical field.
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 8215-8226
Automated Motion Control of a Microparticle Swarm in Liquids by a Single-Solenoid Electromagnetic Manipulation System
In recent years, magnetic field-controlled microparticles have demonstrated their superiority in biomedical applications. To improve the operation efficiency and imaging effect of microparticles, increasing numbers of researchers are devoted to driving a swarm composed of a group of microparticles. In this study, a new strategy for autonomously manipulating microparticle swarms in liquids via an electromagnetic coil system was investigated. Compared with the commonly used rotating magnetic field composed of multiple electromagnetic coils, the oscillating magnetic field drive system formed by a single electromagnetic coil reduces the occupied space meanwhile ensures the sufficient working space, making the microparticle movement more flexible while providing greater feasibility for good compatibility with imaging systems. Through designing the parameters of the input current, a vortex-shaped swarm can be formed, and the movement of the entire swarm can be pulled by controlling the coil position. Owing to the rotation of microparticles, the coefficient of the control input is unknown uncertainty. To solve this uncertainty problem, a sliding mode controller is used, and the chattering caused by the sliding mode surface is reduced using a saturation function. Lastly, the effectiveness of the proposed strategy is verified by simulation and experiments. Note to Practitioners —The motivation of this article is mainly to solve the problem of magnetic microparticle aggregation, aiming to form a stable swarm and automatically control the movement of the swarm. Most of the existing methods of aggregating microparticles to form a swarm are based on the creation of a rotating magnetic field by Helmholtz coils, which leads to the problem of spatial limitation. To solve this problem, this research uses one single solenoid to form a stable swarm, which provides more space for imaging equipment and objects requiring operation. The controlled movement of the stable swarm is achieved by manipulating the solenoid with a sliding mode controller. It reduces the impact of system uncertainties, allowing the swarm to automatically track a predefined path accurately. This will provide a new idea for the application of microparticles in the biomedical field.
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 30 (6) , 2672-2680
Automated 3-D Electromagnetic Manipulation of Microrobot With a Path Planner and a Cascaded Controller
Manipulating microrobots to move in a 3-D space is a basic requirement for their in vivo medical applications. In this study, the automatic manipulation of a microrobot in a liquid 3-D space via an electromagnetic coil system is investigated. A path planner is designed to search an optimal path in a 3-D space with obstacles automatically, and a cascaded control algorithm is developed to control the microrobot’s movement along the planned path. The path is generated by combining the A-star and minimum jerk methods. The collision of the generated path with the obstacles is prevented and the hysteresis caused by the current change is minimized by reducing the jerk of the movement with a passable path from the starting point to the endpoint. In the cascaded control algorithm, the incremental nonlinear dynamic inversion (INDI) method and a proportional control are used as the inner and outer loops to guide the microrobot’s movement along the desired trajectory with an appropriate velocity while eliminating the influence of system uncertainty and external disturbances. Simulation and experiments are performed to verify the effectiveness of the proposed control strategy.
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 30 (6) , 2672-2680
Automated 3-D Electromagnetic Manipulation of Microrobot With a Path Planner and a Cascaded Controller
Manipulating microrobots to move in a 3-D space is a basic requirement for their in vivo medical applications. In this study, the automatic manipulation of a microrobot in a liquid 3-D space via an electromagnetic coil system is investigated. A path planner is designed to search an optimal path in a 3-D space with obstacles automatically, and a cascaded control algorithm is developed to control the microrobot’s movement along the planned path. The path is generated by combining the A-star and minimum jerk methods. The collision of the generated path with the obstacles is prevented and the hysteresis caused by the current change is minimized by reducing the jerk of the movement with a passable path from the starting point to the endpoint. In the cascaded control algorithm, the incremental nonlinear dynamic inversion (INDI) method and a proportional control are used as the inner and outer loops to guide the microrobot’s movement along the desired trajectory with an appropriate velocity while eliminating the influence of system uncertainty and external disturbances. Simulation and experiments are performed to verify the effectiveness of the proposed control strategy.
- 22 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 38 (3) , 1583-1598
3D Navigation Control of Untethered Magnetic Microrobot in Centimeter-Scale Workspace Based on Field-of-View Tracking Scheme
Automatic 3D navigation control of microrobot in large microenvironment is one of the primary challenges hindering its applications. In this article, we present a systematic approach to use an electromagnetic manipulation system to deal with this challenge. Two movable orthogonal microscopic cameras scan the microenvironment on the top view and side view to build a stereo occupancy map automatically. The initial position of microrobot can be located on the basis of the similarity curves generated by the scanning sequences. In accordance with the distribution characteristic of electromagnetic fields in workspace, an enhanced rapidly exploring random tree algorithm is proposed to avoid obstacles in the complex environment. To ensure continuous visual servo in wide range, a field-of-view tracking method is developed using a specific image definition evaluation algorithm. A prescribed performance controller with disturbance observer is designed, which guarantees that the microrobot can remain in the view of microscopic cameras, and the transient and steady-state performance of the system can satisfy the expected requirements. A set of experiments are performed to verify the effectiveness of the proposed automatic 3D navigation strategy. Experimental results show that the microrobot can navigate automatically in a $\boldsymbol{12}\,\times 10\,\times \text{10-mm}$ microenvironment containing obstacles, and achieve reliable field-of-view tracking and path following at high speed.
- 22 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 38 (3) , 1583-1598
3D Navigation Control of Untethered Magnetic Microrobot in Centimeter-Scale Workspace Based on Field-of-View Tracking Scheme
Automatic 3D navigation control of microrobot in large microenvironment is one of the primary challenges hindering its applications. In this article, we present a systematic approach to use an electromagnetic manipulation system to deal with this challenge. Two movable orthogonal microscopic cameras scan the microenvironment on the top view and side view to build a stereo occupancy map automatically. The initial position of microrobot can be located on the basis of the similarity curves generated by the scanning sequences. In accordance with the distribution characteristic of electromagnetic fields in workspace, an enhanced rapidly exploring random tree algorithm is proposed to avoid obstacles in the complex environment. To ensure continuous visual servo in wide range, a field-of-view tracking method is developed using a specific image definition evaluation algorithm. A prescribed performance controller with disturbance observer is designed, which guarantees that the microrobot can remain in the view of microscopic cameras, and the transient and steady-state performance of the system can satisfy the expected requirements. A set of experiments are performed to verify the effectiveness of the proposed automatic 3D navigation strategy. Experimental results show that the microrobot can navigate automatically in a $\boldsymbol{12}\,\times 10\,\times \text{10-mm}$ microenvironment containing obstacles, and achieve reliable field-of-view tracking and path following at high speed.
- 30 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 19 (4) , 3083-3092
Robust Navigation Control of a Microrobot With Hysteresis Compensation
Navigation control of microrobots in vivo has great potential in precision medicine and has attracted considerable attention in recent years. The control performance of the existing methods is considerably affected by hysteresis nonlinearity. This article presents a robust control method that can overcome hysteresis influence in navigating a microrobot actuated by an electromagnetic coil system. A motion planner that combines the breadth-first search (BFS) method and genetic algorithm (GA) is used to plan a reliable and flexible trajectory for the microrobot navigation. To compensate for hysteresis nonlinearity existing in the system, the Prandtl–Ishlinskii (PI) model is introduced. A robust controller that integrates adaptive sliding mode control (ASMC) and nonlinear disturbance observer is designed to guarantee the stability and accuracy of the microrobot in motion. Experiments have been performed to demonstrate the effectiveness of the proposed approach. The success of this research will advance the microrobot navigation for in vivo applications. Note to Practitioners—The motivation of this article is to eliminate the effect of hysteresis caused by the electromagnetic system on microrobot motion. Existing research on hysteresis compensation mostly uses inverse model or online model identification, which is not suitable for real-time control of the microrobot. In addition, the disturbance and uncertainty caused by the microfluidic environment at different flow rates will also affect the control performance of the microrobot. To solve the above problems, an adaptive robust control method is developed in this article. Experimental results have shown that the proposed method can successfully control the microrobot in the in vitro and in vivo environment.
- 30 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 19 (4) , 3083-3092
Robust Navigation Control of a Microrobot With Hysteresis Compensation
Navigation control of microrobots in vivo has great potential in precision medicine and has attracted considerable attention in recent years. The control performance of the existing methods is considerably affected by hysteresis nonlinearity. This article presents a robust control method that can overcome hysteresis influence in navigating a microrobot actuated by an electromagnetic coil system. A motion planner that combines the breadth-first search (BFS) method and genetic algorithm (GA) is used to plan a reliable and flexible trajectory for the microrobot navigation. To compensate for hysteresis nonlinearity existing in the system, the Prandtl–Ishlinskii (PI) model is introduced. A robust controller that integrates adaptive sliding mode control (ASMC) and nonlinear disturbance observer is designed to guarantee the stability and accuracy of the microrobot in motion. Experiments have been performed to demonstrate the effectiveness of the proposed approach. The success of this research will advance the microrobot navigation for in vivo applications. Note to Practitioners—The motivation of this article is to eliminate the effect of hysteresis caused by the electromagnetic system on microrobot motion. Existing research on hysteresis compensation mostly uses inverse model or online model identification, which is not suitable for real-time control of the microrobot. In addition, the disturbance and uncertainty caused by the microfluidic environment at different flow rates will also affect the control performance of the microrobot. To solve the above problems, an adaptive robust control method is developed in this article. Experimental results have shown that the proposed method can successfully control the microrobot in the in vitro and in vivo environment.
- 16 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 18 (4) , 2076-2086
Automated 3-D Deformation of a Soft Object Using a Continuum Robot
This study investigates the use of a tendon-driven continuum robot to deform a soft object, whereas the robot body is deformed into an arbitrary shape to adapt to a constrained environment. A dynamic estimator (DE) is developed to approximate the Jacobian matrix that associates the actuator input with the deformed output of the soft object. This helps solve the singularity problem and reduce the effects of noise. Then a visual predictive controller (VPC) with a reference trajectory is developed to ensure a smooth operation. A linear extended-state observer (ESO) is further designed to measure the robot states, such that the controller can compensate for the estimation error. Simulations and experiments are performed to verify the proposed control approach.
- 16 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 18 (4) , 2076-2086
Automated 3-D Deformation of a Soft Object Using a Continuum Robot
This study investigates the use of a tendon-driven continuum robot to deform a soft object, whereas the robot body is deformed into an arbitrary shape to adapt to a constrained environment. A dynamic estimator (DE) is developed to approximate the Jacobian matrix that associates the actuator input with the deformed output of the soft object. This helps solve the singularity problem and reduce the effects of noise. Then a visual predictive controller (VPC) with a reference trajectory is developed to ensure a smooth operation. A linear extended-state observer (ESO) is further designed to measure the robot states, such that the controller can compensate for the estimation error. Simulations and experiments are performed to verify the proposed control approach.
- 4 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 5 (4) , 6255-6261
Electromagnetic Actuation of Microrobots in a Simulated Vascular Structure With a Position Estimator Based Motion Controller
The use of microrobots to achieve micromanipulation in vivo has attracted considerable attention in recent years to meet the request of non-invasiveness, precision and high efficiency in medical treatment. This letter reports the use of a home-designed electromagnetic manipulation system to control the movements of microrobots in a simulated vascular structure. After dynamic modeling, the moving trajectory of the microrobot is designed on the basis of an artificial potential field. Estimator for position is then designed with stability analysis by a Lyapunov approach. A super-twisting algorithm is further applied to control the microrobot to move along with the desired trajectory. Simulations and experiments are finally performed to demonstrate the effectiveness of the proposed control approach.
- 4 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 5 (4) , 6255-6261
Electromagnetic Actuation of Microrobots in a Simulated Vascular Structure With a Position Estimator Based Motion Controller
The use of microrobots to achieve micromanipulation in vivo has attracted considerable attention in recent years to meet the request of non-invasiveness, precision and high efficiency in medical treatment. This letter reports the use of a home-designed electromagnetic manipulation system to control the movements of microrobots in a simulated vascular structure. After dynamic modeling, the moving trajectory of the microrobot is designed on the basis of an artificial potential field. Estimator for position is then designed with stability analysis by a Lyapunov approach. A super-twisting algorithm is further applied to control the microrobot to move along with the desired trajectory. Simulations and experiments are finally performed to demonstrate the effectiveness of the proposed control approach.
- 1 January 2020
- Published by Elsevier in ISA Transactions
- Vol. 96, 245-254
Distributed tracking control for multiple Euler–Lagrange systems with communication delays and input saturation
- 1 January 2020
- Published by Elsevier in ISA Transactions
- Vol. 96, 245-254
Distributed tracking control for multiple Euler–Lagrange systems with communication delays and input saturation
- 18 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 67 (8) , 2349-2358
Automated In Vivo Navigation of Magnetic-Driven Microrobots Using OCT Imaging Feedback
Objective: The application of in vivo microrobot navigation has received considerable attention from the field of precision therapy, which uses microrobots in living organisms. Methods: This study investigates the navigation of microrobots in vivo using optical coherence tomography (OCT) imaging feedback. The electromagnetic gradient field generated by a home-made electromagnetic manipulation system is magnetically modeled. With this model, the magnetic force acting on the microrobot is calculated, and the relationship between this force and the velocity of the microrobot is characterized. Results: Results are verified through in vitro experiments wherein microrobots are driven in three types of fluid, namely, normal saline, gastric juice, and mouse urine. In vivo experiments are performed to navigate the microrobot in a mouse portal vein in which the OCT imaging system tracks the microrobot in vivo. Conclusions: Experimental results demonstrate the effectiveness of the proposed approach. The microrobots can be magnetically driven in the in vivo environment using the OCT imaging feedback. Significance: The significance of this study lies in providing a new method of driving microrobots in vivo.
- 18 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 67 (8) , 2349-2358
Automated In Vivo Navigation of Magnetic-Driven Microrobots Using OCT Imaging Feedback
Objective: The application of in vivo microrobot navigation has received considerable attention from the field of precision therapy, which uses microrobots in living organisms. Methods: This study investigates the navigation of microrobots in vivo using optical coherence tomography (OCT) imaging feedback. The electromagnetic gradient field generated by a home-made electromagnetic manipulation system is magnetically modeled. With this model, the magnetic force acting on the microrobot is calculated, and the relationship between this force and the velocity of the microrobot is characterized. Results: Results are verified through in vitro experiments wherein microrobots are driven in three types of fluid, namely, normal saline, gastric juice, and mouse urine. In vivo experiments are performed to navigate the microrobot in a mouse portal vein in which the OCT imaging system tracks the microrobot in vivo. Conclusions: Experimental results demonstrate the effectiveness of the proposed approach. The microrobots can be magnetically driven in the in vivo environment using the OCT imaging feedback. Significance: The significance of this study lies in providing a new method of driving microrobots in vivo.
- 22 January 2019
- Published by Springer Nature in International Journal of Fuzzy Systems
- Vol. 21 (2) , 503-517
Backstepping-Based Distributed Finite-Time Coordinated Tracking Control for Multiple Uncertain Euler–Lagrange Systems
- 22 January 2019
- Published by Springer Nature in International Journal of Fuzzy Systems
- Vol. 21 (2) , 503-517
Backstepping-Based Distributed Finite-Time Coordinated Tracking Control for Multiple Uncertain Euler–Lagrange Systems
- Open Access
- 18 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 12598-12609
Distributed Coordinated Tracking Control for Multiple Uncertain Euler–Lagrange Systems With Time-Varying Communication Delays
In this paper, under directed topology, distributed coordinated tracking control schemes are proposed for multiple Euler-Lagrange systems with time-varying communication delays, nonlinear uncertainties, and external disturbances. Concerning with different leader velocities, both constant leader velocity case and time-varying leader velocity case are addressed by designing two different distributed observers. Combining with the proposed distributed leader velocity observers, two coordinated tracking control schemes are developed by the effort of neural network approximation and sliding mode technique which can compensate the nonlinearities and uncertainties. For the first case, tracking errors are rigorously proved to be globally asymptotically converged by using Lyapunov-Krasovskii method. To further eliminate chattering caused by the discontinuous sign function, the saturation function is used for the second case, and the proposed control algorithm ensures the same convergence of tracking errors via Lyapunov analysis. Finally, the effectiveness of the proposed distributed tracking control schemes is verified by the numerical examples.
- 18 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 12598-12609
Open AccessDistributed Coordinated Tracking Control for Multiple Uncertain Euler–Lagrange Systems With Time-Varying Communication Delays
In this paper, under directed topology, distributed coordinated tracking control schemes are proposed for multiple Euler-Lagrange systems with time-varying communication delays, nonlinear uncertainties, and external disturbances. Concerning with different leader velocities, both constant leader velocity case and time-varying leader velocity case are addressed by designing two different distributed observers. Combining with the proposed distributed leader velocity observers, two coordinated tracking control schemes are developed by the effort of neural network approximation and sliding mode technique which can compensate the nonlinearities and uncertainties. For the first case, tracking errors are rigorously proved to be globally asymptotically converged by using Lyapunov-Krasovskii method. To further eliminate chattering caused by the discontinuous sign function, the saturation function is used for the second case, and the proposed control algorithm ensures the same convergence of tracking errors via Lyapunov analysis. Finally, the effectiveness of the proposed distributed tracking control schemes is verified by the numerical examples.