Sotiria Stefanidou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sotiria Stefanidou has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Andreas J. Kappos
Khalifa University of Science and Technology
11 shared publications - Olga Markogiannaki
Competence Center SURE, 50100 Kozani, Greece
6 shared publications - Grigorios Tsinidis
Department of Civil Engineering, School of Engineering, University of Thessaly, Pedion Areos, GR-38334 Volos, Greece
5 shared publications - Konstantinos Morfidis
Earthquake Planning and Protection Organization (EPPO-ITSAK), Dasylliou 24-26, 55535 Thessaloniki, Greece
3 shared publications - Michalis Fragiadakis
School of Civil Engineering, National Technical University of Athens, Athens, Greece
3 shared publications - Anastasios Sextos
University of Bristol
2 shared publications
Latest Publications
- Open Access
- 8 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (12) , 5854
INFRARES Tool: A Fully Parametrized, Interactive Tool for Multi-Hazard Resilience Assessment of Bridges and Tunnels in Transportation Networks
This paper presents the INFRARES tool, a fully parameterized, interactive, and freely available tool for the resilience assessment of bridges and tunnels within Greece’s transportation networks, under the impact of single or multiple hazards, including earthquakes and floods. The tool facilitates the application of a comprehensive methodology developed through the INFRARES project: Towards resilient transportation infrastructure in a multi-hazard environment research project. The resilience of each examined asset is quantified for the selected hazard scenario using a resilience index and a corresponding resilience grade. The INFRARES tool introduces two key innovations over previous approaches: first, it incorporates both structural and geotechnical components of bridges, overpasses, and tunnels in the vulnerability assessment step; second, it enables GIS-based visualization of the resilience index across selected single- or multi-hazard scenarios. In this context, INFRARES serves as a proactive decision-support tool, supporting authorities, infrastructure operators, and stakeholders to effectively assess, manage, and mitigate the impacts of diverse hazards on transportation systems, thereby enhancing the safety, reliability, resilience, and sustainability of transportation infrastructure under multi-hazard conditions. The proposed tool and the obtained results may support resilience-informed decision-making, prioritization of mitigation measures, and sustainable management of transportation infrastructure exposed to multiple natural hazards.
- 8 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (12) , 5854
Open AccessINFRARES Tool: A Fully Parametrized, Interactive Tool for Multi-Hazard Resilience Assessment of Bridges and Tunnels in Transportation Networks
This paper presents the INFRARES tool, a fully parameterized, interactive, and freely available tool for the resilience assessment of bridges and tunnels within Greece’s transportation networks, under the impact of single or multiple hazards, including earthquakes and floods. The tool facilitates the application of a comprehensive methodology developed through the INFRARES project: Towards resilient transportation infrastructure in a multi-hazard environment research project. The resilience of each examined asset is quantified for the selected hazard scenario using a resilience index and a corresponding resilience grade. The INFRARES tool introduces two key innovations over previous approaches: first, it incorporates both structural and geotechnical components of bridges, overpasses, and tunnels in the vulnerability assessment step; second, it enables GIS-based visualization of the resilience index across selected single- or multi-hazard scenarios. In this context, INFRARES serves as a proactive decision-support tool, supporting authorities, infrastructure operators, and stakeholders to effectively assess, manage, and mitigate the impacts of diverse hazards on transportation systems, thereby enhancing the safety, reliability, resilience, and sustainability of transportation infrastructure under multi-hazard conditions. The proposed tool and the obtained results may support resilience-informed decision-making, prioritization of mitigation measures, and sustainable management of transportation infrastructure exposed to multiple natural hazards.
- Open Access
- 10 February 2026
- Published by Elsevier in SSRN Electronic Journal
An Adaptive Homogenisation-Based Framework for Inelastic Pushover Analysis of Masonry Structures
Masonry is a heterogeneous composite material formed by brick or stone units and mortar joints, exhibiting intrinsically anisotropic mechanical behaviour. A wide range of modelling strategies, from detailed micro-modelling to equivalent homogenisation techniques, has been proposed in the literature; however, uncertainties in material properties and failure mechanisms continue to challenge the reliable nonlinear assessment of masonry structures. This study introduces a comprehensive computational framework for the inelastic analysis of masonry walls modelled as an equivalent homogenised orthotropic material. The adopted homogenisation procedure is analytically formulated to derive the elastic properties of the equivalent medium, while a subsequent deconvolution step enables the extraction of stresses at the level of the constituent materials. These stresses are evaluated through dedicated failure criteria for bricks and mortar joints, allowing the explicit identification of tensile, shear and compressive failure modes. A step-by-step adaptive pushover methodology is then developed, where the homogenised material properties are updated after each detected failure, capturing the progressive degradation of stiffness and strength. The proposed framework is validated through a benchmark masonry shear wall, and the resulting load–displacement curves and failure patterns are compared with available experimental and numerical results from the literature. The satisfactory agreement obtained demonstrates the capability of the method to efficiently reproduce the nonlinear response of masonry structures while maintaining low computational cost.
- 10 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAn Adaptive Homogenisation-Based Framework for Inelastic Pushover Analysis of Masonry Structures
Masonry is a heterogeneous composite material formed by brick or stone units and mortar joints, exhibiting intrinsically anisotropic mechanical behaviour. A wide range of modelling strategies, from detailed micro-modelling to equivalent homogenisation techniques, has been proposed in the literature; however, uncertainties in material properties and failure mechanisms continue to challenge the reliable nonlinear assessment of masonry structures. This study introduces a comprehensive computational framework for the inelastic analysis of masonry walls modelled as an equivalent homogenised orthotropic material. The adopted homogenisation procedure is analytically formulated to derive the elastic properties of the equivalent medium, while a subsequent deconvolution step enables the extraction of stresses at the level of the constituent materials. These stresses are evaluated through dedicated failure criteria for bricks and mortar joints, allowing the explicit identification of tensile, shear and compressive failure modes. A step-by-step adaptive pushover methodology is then developed, where the homogenised material properties are updated after each detected failure, capturing the progressive degradation of stiffness and strength. The proposed framework is validated through a benchmark masonry shear wall, and the resulting load–displacement curves and failure patterns are compared with available experimental and numerical results from the literature. The satisfactory agreement obtained demonstrates the capability of the method to efficiently reproduce the nonlinear response of masonry structures while maintaining low computational cost.
- 2 February 2026
- Published by Springer Nature in Natural Hazards
- Vol. 122 (3) , 100
Multiple-hazard fragility assessment of bridges subjected to successive earthquake and flood events
- 2 February 2026
- Published by Springer Nature in Natural Hazards
- Vol. 122 (3) , 100
Multiple-hazard fragility assessment of bridges subjected to successive earthquake and flood events
- 17 October 2025
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- p. 1-17
Flood-induced force estimation on multi-column bridge piers considering scour effects
- 17 October 2025
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- p. 1-17
Flood-induced force estimation on multi-column bridge piers considering scour effects
- 10 June 2025
- Published by Elsevier in Structures
- Vol. 78
Multiple hazard fragility of bridges considering damage accumulation and ageing
- 10 June 2025
- Published by Elsevier in Structures
- Vol. 78
Multiple hazard fragility of bridges considering damage accumulation and ageing
- 9 May 2025
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 23 (8) , 3141-3171
Evaluation of the Durrës station seismic record (ΜW=6.4, 26/11/2019) by means of structural damage assessment
- 9 May 2025
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 23 (8) , 3141-3171
Evaluation of the Durrës station seismic record (ΜW=6.4, 26/11/2019) by means of structural damage assessment
- Open Access
- 1 April 2024
- Published by National Documentation Centre (EKT) in Technical Annals
- Vol. 1 (6)
Seismic risk assessment of buildings and infrastructures using Artificial Neural Networks: Empirical prediction equations
The reliable assessment of the seismic risk, at urban, regional and national level, is extremely important for the government and society and contributes to the proper management of the pre-seismic crisis (interventions, strengthening of buildings and infrastructures), during the earthquake and post-earthquake. The seismic risk assessment involves many difficulties and uncertainties, as it depends on the successful implementation of several individual steps, starting with the identification of the elements at risk, continuing with the assessment of seismic risk and vulnerability and finishing with the estimation of the risk and losses of all types. In all the above methodological frameworks, the use of Artificial Neural Networks (ANNs) is proposed in the literature. Artificial Intelligence (AI)-based methodologies aim to improve the computational efficiency of simulations, by increasing the accuracy and reducing the computational cost. In this paper, a methodology using ANNs at the seismic hazard level is suggested to propose strong motion prediction equations (GMPE) derived from ANN training, by developing a methodological framework and a computational tool that enables continuous training and learning depending on the strong motion data that are fed to it. The proposed equations are compared with models in the literature to verify the reliability of their applicability.
- 1 April 2024
- Published by National Documentation Centre (EKT) in Technical Annals
- Vol. 1 (6)
Open AccessSeismic risk assessment of buildings and infrastructures using Artificial Neural Networks: Empirical prediction equations
The reliable assessment of the seismic risk, at urban, regional and national level, is extremely important for the government and society and contributes to the proper management of the pre-seismic crisis (interventions, strengthening of buildings and infrastructures), during the earthquake and post-earthquake. The seismic risk assessment involves many difficulties and uncertainties, as it depends on the successful implementation of several individual steps, starting with the identification of the elements at risk, continuing with the assessment of seismic risk and vulnerability and finishing with the estimation of the risk and losses of all types. In all the above methodological frameworks, the use of Artificial Neural Networks (ANNs) is proposed in the literature. Artificial Intelligence (AI)-based methodologies aim to improve the computational efficiency of simulations, by increasing the accuracy and reducing the computational cost. In this paper, a methodology using ANNs at the seismic hazard level is suggested to propose strong motion prediction equations (GMPE) derived from ANN training, by developing a methodological framework and a computational tool that enables continuous training and learning depending on the strong motion data that are fed to it. The proposed equations are compared with models in the literature to verify the reliability of their applicability.
- 28 March 2024
- Published by Elsevier in Structures
- Vol. 62
Fragility assessment and risk-targeted design of RC buildings considering the effect of aging
- 28 March 2024
- Published by Elsevier in Structures
- Vol. 62
Fragility assessment and risk-targeted design of RC buildings considering the effect of aging
- Open Access
- 27 February 2024
- Published by MDPI AG in Geohazards
- Vol. 5 (1) , 192-208
Seismic Fragility Curves of RC Buildings Subjected to Aging
A large number of existing reinforced concrete (RC) buildings have surpassed their anticipated service life and show signs of degradation due to aging; this degradation is a function of the construction practices adopted in the past as well as environmental conditions. This paper discusses seismic fragility and the risk assessment of RC structures, emphasizing the impact of corrosion due to concrete aging and the associated deterioration mechanisms. The literature on this topic is critically reviewed, and a methodology for studying the seismic fragility of deteriorated RC buildings is proposed. As a case study, a four-story RC building designed according to contemporary code provisions is examined. The investigation encompasses the derivation of fragility curves, considering critical parameters such as the corrosion rate, the initiation time, and the cover depth. The proposed approach enables the evaluation and quantification of the impact of corrosion mechanisms on the seismic performance of buildings.
- 27 February 2024
- Published by MDPI AG in Geohazards
- Vol. 5 (1) , 192-208
Open AccessSeismic Fragility Curves of RC Buildings Subjected to Aging
A large number of existing reinforced concrete (RC) buildings have surpassed their anticipated service life and show signs of degradation due to aging; this degradation is a function of the construction practices adopted in the past as well as environmental conditions. This paper discusses seismic fragility and the risk assessment of RC structures, emphasizing the impact of corrosion due to concrete aging and the associated deterioration mechanisms. The literature on this topic is critically reviewed, and a methodology for studying the seismic fragility of deteriorated RC buildings is proposed. As a case study, a four-story RC building designed according to contemporary code provisions is examined. The investigation encompasses the derivation of fragility curves, considering critical parameters such as the corrosion rate, the initiation time, and the cover depth. The proposed approach enables the evaluation and quantification of the impact of corrosion mechanisms on the seismic performance of buildings.