FNF. K. Nizametdinov

F. K. Nizametdinov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


F. K. Nizametdinov has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Comparative Analysis of Methods for Assessing the Stability of Quarry Slopes

    by Farit Nizametdinov, Aigerim Yestayeva, Gulnara Zhunussova, Marzhan Igemberlina, Assem Tuyakbai

    The study compares classical and modern approaches to calculating the stability of quarry slopes and walls. It considers the methods of Fellenius, Bishop, Janbu, and Spencer, implemented in the Slide 2D (Rocscience) and «Stability of Quarry Slopes» software packages (NJSC company «Abylkas Saginov Karaganda Technical University» Using the Syrymbett deposit as an example, numerical modeling of the stress-strain state of slopes was performed while varying the angles of inclination, lithological composition, and strength properties of the rock mass. Patterns in the change in the stability factor FoS depending on the structural and physical characteristics of the rock were identified. The calculation results showed the proximity of analytical and numerical solutions, which confirms the correctness of the selected models. The conclusions and recommendations obtained can be applied in the engineering design of stable quarry side profiles and in the prediction of deformation processes.

  • Open Access

    НАБЛЮДЕНИЯ ЗА ДЕФОРМАЦИОННЫМИ ПРОЦЕССАМИ ОТКОСОВ УСТУПОВ И БОРТОВ КАРЬЕРА С ПОМОЩЬЮ РАДИОЛОКАЦИОННЫХ СИСТЕМ ИЗМЕРЕНИЙ

    by Ф.к. Низаметдинов, А.р. Смагулов, А.и. Султанбекова, А.р. Естаева

    В статье представлен обзор и разработана методика проведения наблюдений за деформационными процессами откосов уступов и бортов карьера с использованием наземных радиолокационных систем CHCNAV PS-SAR2000 и Leica IBIS FM-14. Рассмотрены основные типы радарных систем, принципы их функционирования и особенности применения в условиях открытых горных работ. Приведены результаты мониторинга устойчивости прибортового горного массива, а также описаны этапы обработки данных радиолокационной съемки с применением программного обеспечения CHCNAV MAS. Полученные результаты используются для выявления зон потенциальной неустойчивости, трещин, разломов и ослабленных участков, уточнения геологических разрезов, определения границ между различными типами пород и фиксации скрытых геологических нарушений, оказывающих влияние на прочность и устойчивость бортов карьера Мақалада Жетіқара кен орнының тау-кен-геологиялық жағдайлары мен оларды игеру кезіндегі геотехникалық ерекшеліктері қарастырылған. CHCNAV PS-SAR2000 және Leica Ibis FM-14 наземдік радиолокациялық жүйелерін қолдана отырып, карьердің беткейлері мен бүйірлерінде жүретін деформациялық процестерді бақылау әдістемесі ұсынылған. Радиолокациялық жүйелердің негізгі түрлері, жұмыс істеу қағидалары және ашық тау-кен жұмыстары жағдайында қолдану ерекшеліктері сипатталған. CHCNAV MAS бағдарламалық жасақтамасы көмегімен радиолокациялық деректерді өңдеу кезеңдері келтірілген. Алынған нәтижелер ықтимал тұрақсыздық аймақтарын, жарықтар мен ақауларды, тау жыныстары массивіндегі әлсіреген учаскелерді анықтауға, егжей-тегжейлі геологиялық кесінділерді нақтылауға тұрақтылығына әсер ететін жасырын геологиялық бұзылуларды анықтауға мүмкіндік береді The article presents the mining and geological conditions of the Dzhetygarinsky deposit and their influence on the stability of quarry slopes. A methodology for monitoring deformation processes of bench and pit wall slopes using the CHCNAV PS-SAR2000 and Leica IBIS FM-14 ground-based radar systems is described. The main types of radar systems, their operating principles, and specific features of application under open-pit mining conditions are considered. The stages of processing radar survey data using the CHCNAV MAS software are outlined. The obtained results can be applied to identify zones of potential instability, cracks, fractures, and weakened areas within the rock mass, to refine detailed geological cross-sections, determine boundaries between different rock types, and detect hidden geological disturbances that may significantly affect the strength and stability of quarry walls

  • Open Access

    ДИФФЕРЕНЦИАЛДЫ ИНТЕРФЕРОМЕТРИЯ ӘДІСІ АРҚЫЛЫ ЖЕР БЕТІНІҢ ҚОЗҒАЛЫСЫН БАҚЫЛАУ НӘТИЖЕЛЕРІ

    by А.к. Сатбергенова, А.қ. Зекен, Ф.к. Низаметдинов, Н.ф. Низаметдинов

    Бұл мақалада Жер бетінің қозғалысын бақылау үшін дифференциалды интерферометрия әдісін қолдану нәтижелері ұсынылған. Атасу темір кен орындарындағы зерттеулер Sentinel-1 спутниктерінің деректері негізінде жүргізілді. Нәтижелер жер бедеріндегі айтарлықтай деформациялар мен шөгулерді анықтады. Бұл әдіс табиғи (жер сілкіністері, жанартаулық белсенділік) және антропогендік (тау-кен жұмыстары, құрылыс) процестерді жоғары дәлдікпен бақылауға мүмкіндік береді. Зерттеу тек қана жер бедерінің өзгерістерін бақылаумен шектелмейді, сонымен қатар геодинамикалық процестерді болжауға, қауіпті аймақтарды анықтауға және табиғи апаттардың алдын алуға көмектеседі. Дифференциалды интерферометрия ұзақ мерзімді мониторинг және уақыт бойынша динамикалық өзгерістерді талдау үшін ерекше маңызды құрал болып табылады. Бұл әдіс кеңістіктік деректерді тиімді қолдану арқылы аумақтардың қауіпсіздігі мен тұрақты дамуын қамтамасыз етеді This paper presents the results of using the differential interferometry method to monitor surface motion. The research was conducted using Sentinel-1 satellite data at the Atasu iron ore deposits. The findings revealed significant surface deformations and subsidence, confirming the high precision of this method for monitoring both natural (earthquakes, volcanic activity) and anthropogenic (mining, construction) processes. Differential interferometry not only detects current surface changes but also predicts future developments, which is crucial for preventing natural and man-made disasters. The method allows for long-term monitoring and the analysis of dynamic changes over time and space. It offers new prospects for enhancing territorial safety and sustainable development by providing precise geodynamic analysis and control В статье представлены результаты использования метода дифференциальной интерферометрии для мониторинга движения поверхности Земли. Исследования проводились на основе данных спутников Sentinel-1 в районе месторождений железной руды Атасу. Полученные данные выявили значительные деформации и просадки, что подтверждает высокую точность метода для мониторинга как природных (землетрясения, вулканизм), так и антропогенных (горные работы, строительство) процессов. Дифференциальная интерферометрия позволяет не только фиксировать текущие изменения земной поверхности, но и прогнозировать их развитие, что особенно важно для предотвращения природных и техногенных катастроф. Метод обеспечивает возможность долгосрочного мониторинга и анализа динамических изменений в пространстве и времени. Он открывает новые перспективы для обеспечения безопасности территорий и устойчивого их развития за счет точного геодинамического анализа и контроля

  • Анизотропты карьер беткейлерінің тұрақтылығын бағалау

    by Ф.к. Низаметдинов, Р.н. Джамантыкова, А.в. Михнев, А. Алибаев

    Рассматривается проблема оценки устойчивости анизотропных карьерных откосов на основе тщательного выявления структурных особенностей прибортовых массивов путем сканирования их горным сканером с целью выявления элементов залегания, а также уточнения прочностных свойств пород и породных контактов на основе проведения натурных испытаний породных призм и обследования локальных обрушений в откосах уступов на карьерах. Оценка устойчивости анизотропных откосов уступов осуществляется расчетными схемами с учетом наличия разрывных нарушений и трещин, которые разработаны проф. Окатовым Р.П. Результаты оценки устойчивости откосов уступов позволяют выполнить районирование и спрогнозировать состояние северного и южного бортов карьера Бозымчак Анизотропты карьерлік беткейлердің тұрақтылығын бағалау проблемасы пайда болу элементтерін анықтау мақсатында оларды тау-кен сканерімен сканерлеу арқылы аспаптық массивтердің құрылымдық ерекшеліктерін мұқият анықтау негізінде, сондай-ақ тау жыныстарының призмалары мен тау жыныстарының байланыстарының беріктік қасиеттерін нақтылау және Карьерлердегі беткейлердегі жергілікті құлауды зерттеу негізінде қарастырылады. Жоталардың анизопропты беткейлерінің тұрақтылығын бағалау р. п. проф. Окатов әзірлеген жарылғыш бұзылулар мен жарықтардың болуын ескере отырып, есептік схемалармен жүзеге асырылады. Жоталардың беткейлерінің тұрақтылығын бағалау нәтижелері аудандастыруға және Бозымшақ карьерінің Солтүстік және Оңтүстік борттарының жай-күйін болжауға мүмкіндік береді The problem of assessing the stability of anisotropic quarry slopes is considered on the basis of careful identification of structural features of the instrument arrays by scanning them with a mining scanner in order to identify the elements of occurrence, as well as clarifying the strength properties of rocks and rock contacts based on field tests of rock prisms and examination of local collapses in the slopes of ledges at quarries. Assessment of the stability of anisopropic slopes of ledges is carried out by calculation schemes taking into account the presence of discontinuous faults and cracks, which were developed by Prof. Okatov R.P. The results of the assessment of the stability of the slopes of the ledges allow us to perform zoning and predict the condition of the northern and southern sides of the Bozymchak quarry

  • Үйінді қоршау бөгеттерінің қалдық қоймаларының байыту фабрикаларының жай күйін аспаптық бақылаудың кешенді әдістері

    by Ф.к. Низаметдинов, Д.с. Ожигин, Р.ф. Низаметдинов, Е.в. Ситникова

    Предлагается комплексная методика инструментального контроля состояния насыпных оградительных дамб хвостохранилищ обогатительных фабрик, основанная на создании рабочего опорного обоснования в виде твердых и связующих маркшейдерских реперов, и производства специальных методик измерений с использованием роботизированного электронного тахеометра, глобальных спутниковых систем и цифровых нивелиров с инварными рейками. Именно такая поэтапная комбинация современных методов измерений позволяет на ранней стадии получить высокую точность отклонений смещения тела насыпной дамбы. Полученные высокоточные результаты инструментальных наблюдений за существующими насыпными дамбами позволяют своевременно разработать мероприятия по предупреждению и своевременной ликвидации деформаций A comprehensive methodology is proposed for instrumental monitoring of the condition of bulk protective dams of tailings dumps of processing plants, based on the creation of a working reference justification in the form of solid and binding surveying benchmarks, and the production of special measurement techniques using a robotic electronic total station, global satellite systems and digital levelers with invar rails. It is this step-by-step combination of modern measurement methods that makes it possible to obtain high accuracy of displacement deviations of the bulk dam body at an early stage. The obtained high-precision results of instrumental observations of existing bulk dams make it possible to develop timely measures for the prevention and timely elimination of deformations Қатты және байланыстырушы маркшейдерлік реперлер түріндегі жұмыс тірек негіздемесін құруға және роботтандырылған электрондық тахеометрді, ғаламдық спутниктік жүйелерді және инварналық рейкалар мен сандық нивелирлерді пайдалана отырып, өлшеудің арнайы әдістемелерін өндіруге негізделген байыту фабрикаларының қалдық қоймаларының үйінді қоршау бөгеттерінің жай-күйін аспаптық бақылаудың кешенді әдістемесі ұсынылады. Дәл осы заманауи өлшеу әдістерінің кезең-кезеңімен үйлесуі үйінді бөгетінің ауытқуларының жоғары дәлдігін ерте кезеңде алуға мүмкіндік береді. Қолданыстағы үйінді бөгеттерді аспаптық бақылаудың жоғары дәлдіктегі нәтижелері деформациялардыуақтылы алдын алуға және уақтылы жою жөніндегі іс-шараларды әзірлеуге мүмкіндік береді

  • Justification of Pitwall Parameters: A Case-Study of Koktaszhal Deposit, Kazakhstan

    by N. F. Nizametdinov, V. D. Baryshnikov, A. A. Nagibin, R. F. Nizametdinov, A. S. Tuyakbay

    The article describes a technical approach to justification of pitwall parameters based on an integrated geomechanical research of pitwall rock mass using cores from specially drilled earth bores. The sizes of structural blocks, the rock mass quality index and structural weakness coefficient are determined. The strength characteristics of rocks and their physical properties are studied on a laboratory scale. Estimates of pitwall stability using different methods show a good agreement. The optimal pitwall parameters are recommended.


  • Selection and Justification of Design Variables for Strength Properties of Rocks in Slope Stability Analysis for Open Pits

    by F. K. Nizametdinov, V. D. Baryshnikov, E. Zhanatuly, A. A. Nagibin, A. S. Tuyakbai, N. F. Nizametdinov, A. R. Estaeva

    The presented procedure of slope stability analysis for open pits is based on the comprehensive studies into physical/mechanical properties and structural tectonics of pit wall rock mass with regard to jointing. The procedure is applied to find determine structural weakening and rock quality in Koktaszhal Open Pit Copper Mine in Kazakhstan.


  • Analysis of Ground Surface Displacements under the Influence of Repeated Mining Activities in the Zhezkazgan Area

    by N. F. Nizametdinov, V. D. Baryshnikov, R. F. Nizametdinov, M. B. Igemberlina, H. Staňková, Zh. M. Batyrshaeva

    The authors study the ground surface displacement in the area of Zhezkazgan copper ore field now subjected to extraction of ore reserves from rib pillars. The high-precision leveling procedure using digital leveling instrumentation and invar leveling staffs is proposed for the application in arrangement of a geodynamic test site at the settlements of Zhezkazgan and Lermontovo. The steel control survey points are firmly connected with rock mass by means of grouting. The observation results made it possible to detect and evaluate the ground surface displacements.


  • Slope Stability in Open Pit Mines in Clayey Rock Mass

    by N. F. Nizametdinov, R. F. Nizametdinova, A. A. Nagibin, A. R. Estaeva

    Justification of slope parameters for benches and pit walls in clayey rock mass bases on studies into geological structure and physical and mechanical properties of rocks of various lithological varieties. The upper layers of pit walls occur in weak clayey overburden, in the crust of weathering and in transition zone with conglomerates, up to 150 m in total thickness. In this case, it is required to calculate accurately angles of clayey slopes, to undertake cutback at recommended angles and to eliminate heavy flow of melt water and rain water from ground surface to the slopes. Mining within the design pit wall limits should be accompanied by continuous instrumental monitoring of pit wall slopes.


  • Methods of in situ strength testing of rocks and joints

    by F. K. Nizametdinov, A. A. Nagibin, V. V. Levashov, R. F. Nizametdinov, N. F. Nizametdinov, A. E. Kasymzhanova