Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Manoj Kumar Banjare has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Detail studies on interaction of surfactants with amino acid l-arginine by multiple techniques

    by Manoj Kumar Banjare, Dinesh Kumar Tandon, Kamalakanta Behera, Indrapal Karbhal, Manmohan L. Satnami, Kallol Kumar Ghosh, Muhammad Wajid Ullah, Inam Ullah, Javed Masood Khan

  • Influence of temperature and additives (glucose/urea) on the antidiabetic drug-mediated micellization of CTAB

    by Abhishek Srivastava, Pintu Sar, Manoj Kumar Banjare, Nitin Srivastava, Neetu Srivastava

    The study demonstrates that the electrostatic attraction, ion–dipole interactions, hydrogen bonding, and hydrophobic interactions are the key contributors to the MHC-mediated aggregation of CTAB.


  • Influence of Organic Solvents on the Micellization Behavior of Conventional Surfactants: A Comparative Study by Spectroscopic Methods

    by Dolly Baghel, Manoj Kumar Banjare, Bhupendra Singh Banjare, Kamalakanta Behera, Benvikram Barman, Malik Abdul Rub, Kallol Kumar Ghosh

    Influence of organic solvents, such as nitrobenzene, chlorobenzene, and aniline, on the micellization behavior of two conventional surfactants, that is, sodium dodecyl sulfate (SDS) and Triton X‐100 (TX100), was investigated using stalagmometry, viscosity, colorimetry, and FTIR spectroscopy. Several surface adsorption parameters, that is, the maximum surface excess concentration (Γ max ), the minimum area per molecule ( A min ), the surface pressure at CMC ( π CMC ), and the efficiency of adsorption (pC 20 ), including the CMC, were determined through stalagmometry. The results demonstrated significant alterations in CMC and γ CMC values upon the introduction of different v/v percentages of organic solvents, following this order of decrease: water > 30 v/v% > 70 v/v% for nitrobenzene, chlorobenzene, and aniline. A min values decreased with increasing v/v% of organic solvent for TX100 but increased for SDS. Additionally, pC 20 was observed to be higher for TX100 compared to SDS, indicating greater efficiency of TX100 in reducing CMC. The relative viscosity of the surfactants and organic solvents was determined using the viscosity method, and the CMC values for all the systems were confirmed through colorimetry. FTIR spectroscopy was employed to identify the functional groups involved in the complexation between nitrobenzene, chlorobenzene, aniline, and surfactants. The current agreements will incorporate pharmaceutical sciences, cosmetics, medicinal delivery, and household goods.

  • Micellization Behavior Altered by Deep Eutectic Solvents

    by Manoj Kumar Banjare, Kamalakanta Behera, Siddharth Pandey, Kallol Kumar Ghosh

  • Synergic Interaction of a Phosphonium‐Based Ionic Liquid with a Synthesized Carbocyclic Sugar‐Based Inositol Derivative

    by Bhupendra Singh Banjare, Manoj Kumar Banjare, Nitai Sarkar, Kamalakanta Behera, Dolly Baghel, Benvikram Barman, Dinesh Tandon, Indrapal Karbhal, Manmohan Lal Satnami, Kallol Kumar Ghosh

    Ionic liquids (ILs) have several applications, such as solubilizers, transporters, and enhancing component efficacy. The phosphonium‐based ionic liquid (IL), i.e., trihexyltetradecylphosphonium bis(2,4,4‐trimethylpentyl)phosphinate ([ P 666(14) ][TMPP]), might be affected by synergic interaction with synthesized carbocyclic sugar‐based inositol derivative, i.e., 1,2‐ cis ‐ketal,1,4‐dibenzoyl‐ myo ‐inositol ( cis ‐ketal), were investigated with dynamic light scattering (DLS), surface tension, FTIR, conductivity, colorimetry, and viscometry at 299.0 ± 0.5 K temperature. The zeta potential, particle size distribution, critical micelle concentrations (CMC), and various thermodynamic parameters, viz., Δ G ° ads, Δ G ° trans, ∆ G s min , Δ G ° m , Δ G ° m, tail and interfacial parameters, i.e., Г max , A min , π CMC , p C 20 , and γ CMC, have been calculated. A substantial drop in IL CMC values was observed at various cis ‐ketal concentrations (mM), and their conformational study was conducted by conductometric and colorimetric techniques. For IL‐ cis ‐ketal systems, rheological behavior based on reduced, intrinsic, and relative viscosity was computed. Self‐aggregation of IL with cis ‐ketal was affected by electrostatic, hydrophilic, and hydrophobic interactions. The IL with cis ‐ketal shows various types of stretching and bending frequencies that were characterized by the FTIR method. The DLS data displayed that the IL with 2.0 mM cis ‐ketal system has generated significantly larger micelles than pure IL due to the polar character of cis ‐ketal. The current investigation can find potential applications in pharmaceutical sciences, cosmetics, medicinal delivery, etc.


  • Open Access

    Role of Surfactants in Drug Delivery, Pesticides, Antimicrobial Activity and Bioremediation

    by Manoj Kumar Banjare

    This book offers a comprehensive exploration of the application of surfactants and advances research work in industrials and society. It begins with a detailed overview of application of surfactants disucc in Chapters 1-12. Chapter 1 we discuss the general introduction of Surface-Active Agent, CMC, and it can lower interfacial and surface tension at these intersections to allow solids, gases, and liquids to mix or disperse easily, like dispersions in water or other solutions. Chapter 2 discuss the classification of surfactants in four main groups: cationic, nonionic, zwitterionic, and anionic surfactants. Every variety has unique physicochemical characteristics and uses. This study provides a thorough grasp of the importance of these surfactants in a range of sectors by examining their structural traits, functioning, and varied uses. In chapter 3 we discuss the different properties, interfacial parameters, and thermodynamic parameters of different surfactant systems. This chapter 4 we highlight the vital function that surfactants play in the delivery of drugs, emphasizing their special physicochemical characteristics that help with important pharmaceutical issues such as low drug solubility, stability, and bioavailability. As amphiphilic molecules, surfactants make it possible to create a variety of delivery systems that encapsulate hydrophobic medications and improve their therapeutic potential. In this chapter 5 explain the Application of Surfactant in Personal Care Products Formulation, As a responsive ecosystem that interacts with the environment to promote general health, the human skin is essential to the immune system. Because of its capacity to lower surface tension, emulsify oils, wash, and produce foam, surfactants are frequently employed in cosmetic compositions. They are essential components of many different kinds of products, including face cleansers, body washes, shampoos, and lotions. Cosmetics and customised care items that contain surfactants can help protect and nourish the skin. Chapter 6 study the Host-guest chemistry involving macrocyclic hosts is one of the most promising research areas in chemistry, materials science, and biochemistry. This chapter briefly describes the physicochemical properties, preparation method, and mechanism of host-guest complexes. In addition, we also highlight the characterization methods of synthesized host-guest complexes and their various applications, especially in amphiphilic molecules like surfactants, ionic liquids, and surface active ionic liquids. Chapter 7 discuss the Amphiphilic compounds known as surfactants reduce surface tension and create micelles in solutions. Micellar systems are essential in many industries, such as food, detergents, cosmetics, medicines, and environmental applications. The categorisation, creation, and uses of micellar systems are examined in this work, with an emphasis on how they contribute to improved chemical reactions, emulsification, and solubilisation. Future directions in surfactant research are also covered, as well as difficulties including toxicity and environmental issues. The surfactant is a crucial component of emulsifying agent, foaming agent, cleaning agent, wetting agent, dispersing agent, and anti-foaming agents and is used in a wide range of goods. Surfactant molecules have a drive to assemble above the critical micelle concentration (CMC) to create micelle-like structures. Chapter 8 discuss the surfactants are crucial to modern farming practices because they increase the efficacy and sustainability of pesticide treatments. Additionally, biosurfactants have antibacterial properties that make them promising as biopesticides against pests, fungi, and diseases while enhancing plant resistance. Research highlights their contribution to sustainable agriculture, including enhancing trace element bioavailability and maintaining soil moisture levels for optimal crop growth. To improve soil texture, improve nutrient uptake, and reduce environmental toxicity, these substances are increasingly being used in soil amendments, pesticide formulations, and herbicides This chapter 9 we study the solubilization of hydrophobic active ingredients allows for the creation of more effective formulations, especially for pesticides with low water solubility. Surfactants improve the absorption of active ingredients into plant tissues by disrupting cuticular barriers, thereby enhancing systemic action. Recent advancements in surfactant technology include the development of biodegradable biosurfactants and polymeric surfactants, which aim to mitigate environmental persistence and toxicity issues, thereby providing sustainable alternatives to traditional surfactants. Responsive surfactants, engineered to activate under defined environmental conditions, offer targeted control in agricultural applications. The incorporation of surfactants in pesticide formulations leads to less amount requirement which contributes to decreased environmental contamination and expanded pest control effectiveness This chapter 10 we explores the mechanisms by which various classes of surfactants, including cationic, anionic, nonionic, and zwitterionic types, exhibit antimicrobial effects against bacteria, fungi, and viruses. Cationic surfactants, such as quaternary ammonium compounds, have demonstrated potent bactericidal activity, primarily by targeting the negatively charged microbial membranes. Nonionic and zwitterionic surfactants, on the other hand, show promising synergistic effects when combined with antibiotics, enhancing their efficacy. This chapter 11 we explore the solubility and mobility of hydrophobic pollutants, surfactants aid in their removal from the soil. The success of surfactant-based remediation methods, however, depends on several factors, such as the nature of the contaminant, soil characteristics, and the concentration and type of surfactant used. While surfactant-enhanced soil remediation offers a...


  • Deep Eutectic Solvents in Green Chemistry: A Review

    by Benvikram Barman, Manoj Kumar Banjare, Bhupendra Singh Banjare, Dolly Baghel

    Deep eutectic solvents (DESs) as green solvents and sustainable solvents used as replacements for traditional organic solvents and highly applicable for various purposes due to their good chemical properties, such as depression freezing point, low volatility, being biofriendly in nature, less toxicity, environmental friendliness, non-toxic nature, ability to be recycled, reusability, biodegradability, nontoxicity, low vapour pressure, low flammability, etc. These unique physicochemical properties make them perfect for applications in extraction, catalysts, electrochemistry, biotransformation, extracting bioactive compounds, as a green solvent, for nanomaterial synthesis, for metal extraction, for drug delivery, for gas capture, for therapeutic applications, etc. In this paper review, study their method of preparation, types of DESs and its significance in various fields, along with their salient physicochemical properties. DESs can be synthesised by the mixing of hydrogen bond donor (HBD) and hydrogen bond acceptor (HBA) chemical molecules with the proper ratio and heating them. Synthesised DESs It’s characterised by spectroscopic techniques such as Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) techniques, etc. Future research directions are also covered, along with some issues. This analysis offers insights into DES's function in promoting sustainable chemical processes by critically assessing its potential in green chemistry.


  • Open Access

    Micellization behavior of an imidazolium surface-active ionic liquid within aqueous solutions of deep eutectic solvents: a comparative spectroscopic study

    by Manoj Kumar Banjare, Kamalakanta Behera, Malik Abdul Rub, Kallol Kumar Ghosh

    Ionic liquids and deep eutectic solvents are topics of immense importance and are attracting many researchers worldwide owing to their green nature and broader application potential. These green solvents have been widely used in synthesis, catalysis and biocatalysis, nanoscience, pharmaceutics, etc. Hence, it is exciting to see how ionic liquids behave within deep eutectic solvents. Here, we examined the aggregation behavior of an imidazolium-based surface-active ionic liquid (SAIL), 1-decyl-3-methylimidazolium tetrafluoroborate [Dmim][BF4], within aqueous solution of 5 wt% DES choline-based deep eutectic solvents (DESs). Two choline-based DESs (ChCl–urea and ChCl–Gly) were prepared by heating a mixture of 1 : 2 molar ratios of an ammonium salt (choline chloride) with hydrogen bond donors (urea and glycerol). The DESs were characterized using FTIR and 1H-NMR spectroscopic techniques. Micellization behavior of the SAIL [Dmim][BF4] within these aqueous DESs media was investigated using fluorescence, FTIR, dynamic light scattering (DLS), 1H-NMR, and NOESY. The information about the local microenvironment surrounding the probe molecules and size of the aggregates of [Dmim][BF4] in the presence of 5 wt% of aqueous DESs were obtained from fluorescence and DLS, respectively. DLS results showed that IL [Dmim][BF4] forms relatively larger micelles within aqueous solutions of DES ChCl–urea (avg. hydrodynamic radii = 94.6 nm) compared with ChCl–Gly (avg. hydrodynamic radii = 82.8 nm). A significant decrease in the critical micellar concentration and an increase in aggregation number (Nagg) were observed, clearly indicating that micellization of IL [Dmim][BF4] is greatly favored in the DES solutions. FTIR study depicts the strength of intermolecular interactions such as hydrogen bonding, ion–ion pair interactions, and dipole–dipole interactions between the ILs and DESs. The 1H-NMR data showed that differences in chemical shifts can provide significant indication about the IL–DES interactions. 1H-NMR and 1H–1H 2D NOESY spectroscopy were employed to gain insights into these IL–DES interactions that are responsible for the aggregation behavior of the IL [Dmim][BF4] within aqueous DES solutions. It was observed that IL [Dmim][BF4] forms self-assembled structures within the aqueous DESs media. The current results are expected to be useful for colloidal aspects of ILs and DESs and their mixtures with water.


  • Open Access

    Physicochemical insight of phosphonium-based ionic liquid with carbocyclic sugar-based inositol derivative

    by Bhupendra Singh Banjare, Manoj Kumar Banjare, Nitai Sarkar, Kamalakanta Behera, Dolly Baghel, Benvikram Barman, Swati Chandrawanshi, Roman Kumar Aneshwari, Indrapal Karbhal, Manmohan Lal Satnami, et al.


  • Exploration of micellization and phase separation nature of surfactants in metformin hydrochloride + additives media: An experimental and DFT study

    by Tajmul Hasan, Javed Masood Khan, Shahed Rana, Anamul Hoque, Dileep Kumar, Manoj Kumar Banjare, Mohammad Majibur Rahman, Mohammed Nurul Abser