VVViktoriia Vapnichna

Viktoriia Vapnichna

*This is an algorithmically generated author record based on publicly available information.

Viktoriia Vapnichna has a total of 59 co-authors. Here are the top co-authors by number of shared publications:

  • Iurii Kaliukh

    Доктор технічних наук, головний науковий співробітник відділу природничих ресурсів Інституту телекомунікацій і глобального інформаційного простору Національної академії наук України, Київ

    4 shared publications
  • N. A. Shevchuk

    Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського

    4 shared publications
  • O. P. Vynohradova

    Bakul Institute of Superhard Materials, National Academy of Sciences of Ukraine, Kyiv, Ukraine

    3 shared publications
  • Yaroslav Berchun

    PhD, старший науковий співробітник Інституту телекомунікацій і глобального інформаційного простору Національної академії наук України, Київ

    3 shared publications
  • Yuriy Slyusarenko

    SRIBC

    3 shared publications
  • Anatolii Han

    National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute

    2 shared publications

Latest Publications

  • Geometric Digital Twin of a Partially Destroyed High-Rise Building

    by Iurii Kaliukh, Yuriy Slyusarenko, Mihailo Yakovenko, Viktoriia Vapnichna, Oleksandr Dudchyk, Yaroslav Berchun

  • Open Access

    Application of geodetic methods to refine boundary conditions in digital twins of war-damaged multi-story buildings

    by Mykhailo Yakovenko, Olena Nesterenko, Volodymyr Tytarenko, Yevhenii Bakulin, Andrii Banakh, Viktoriia Vapnichna, Yaroslav Berchun, Iurii Kaliukh

    The object of the study is the buildings and structures of Ukraine, which suffered significant destruction as a result of the Russian invasion. The research focuses on the formulation of an applied methodology for deformation and geodetic monitoring of such buildings, based on the geodetic instruments widely used in Ukraine. The methodology was developed and experimentally validated over a five-year period at a test site located in a densely built-up urban area of Kyiv, characterized by a slope elevation difference of approximately 15 meters. The methodology encompasses monitoring of vertical and horizontal deformations, crack propagation in buildings adjacent to the construction site, and inclinometric monitoring of slope deformations. Subsequently, the methodology was applied to refine the boundary conditions of a damaged multi-story building at 6-A Lobanovskyi Avenue in Kyiv, which sustained a missile strike on February 26, 2022, affecting the structure between the 18th and 22nd floors. It was determined that deviations from the reference horizontal plane at the 25th floor slab reached up to 241 mm, with the maximum deformations concentrated at the impact site. The relative difference in vertical displacement was 0.0448, exceeding the normative limit of 0.005 by a factor of nine. These experimental findings were used to refine the initial and boundary conditions of the digital twin model of the building and significantly altered the stress-strain state in comparison to an undeformed analogue. The results of the deformation monitoring and the corresponding numerical simulations were subsequently integrated into a BIM model of the building and informed its restoration strategy


  • Determination of the wear mechanism of the diamond tool matrix by analysis of wear particles

    by O. P Vynohradova, V. V Vapnichna

    Purpose. Determining the contact zone of microindentors from the rock side with the surface of a non-diamond element based on the Ni-Sn system (6 wt%) and in comparison with the contact zone of the specified microindentors with the surface of a similar bond of a diamond-containing element, under dynamic loading. Methodology. To select the wear products of the experimental element material, made by resistive electro-sintering and the core of abrasive sandstone as a result of short-term contact between their surfaces, the tests were performed on a stand created on the basis of the screw-cutting lathe ДІП–200 according to the parameters of technological conditions that simulate the drilling process. The sludge suspension was selected and examined using a ZEISS EVO 50 XVP scanning electron microscope with an Oxford Instruments Ultim Max energy dispersive X-ray analyser. Also, the worn surface of the diamond-free element was subjected to microscopic examination using Lomo Metam R-1 microscopes with a Digital KOCOM CCD video camera and Bausch & Lomb, mod. Gemolite. Findings. The result of the study involves the determination of the direct point of contact between the microindenter on the rock side and the surface of the non-diamond element in the wear particle. The point of direct contact of the specified counterbodies has the form of an elliptical groove, which is the epicenter of the formation of a system of microcracks. The morphometric identity of the wear particles of the studied element and the diamond tool bond indicates the similarity of one of the mechanisms of microindentation from the side of the rock. Originality. Determination of one of the sources of damage to the working surface of the diamond tool element opens up prospects in the study of all stages of the bond wear mechanism depending on changes in its chemical composition or technological parameters of the tool use. Practical value. Determination of the chemical and morphometric features of the wear particles of the diamond tool bond will allow assessing its wear resistance and developing wear resistance criteria, which is reflected in the saving of resources.

  • Best Historical Practice: The Retaining Wall by Military Engineer Daniel de Bosquet on the Landslide-Prone Slopes of the Kyiv-Pechersk Lavra

    by Yuriy Slyusarenko, Yurii Ischenko, Yurii Melashenko, Nina Kosheleva, Yevheniia Pavliuk, Viktor Shokarev, Andrey Shokarev, Svetlana Glazkova, Viktoriia Vapnichna, Yaroslav Berchun, et al.


  • Open Access

    ANALYSIS OF PROGRESSIVE DESIGN SOLUTIONS FOR UNDERGROUND CIVIL PROTECTION STRUCTURES

    by H. I. Haiko, A. L. Han, V. V. Vapnichna, I. O. Matviichuk, Г. І. Гайко, І. О. Матвійчук

    Purpose. Analysis of progressive types and structures of underground civil defense structures against air strikes, development and implementation of innovative solutions in the practice of construction and reconstruction of protective objects, especially for cases of direct impact of ammunition into the perimeter of an underground structure. Methodology. Comparative analysis and differentiation of protective structures, improved methods of renovation and application of existing underground facilities for a new (protective) purpose; methods of finding new technical solutions for the protection of shallow structures from air strikes. In the conditions of Russia's large-scale aggression against Ukraine, the problem of protecting the population from possible air strikes takes priority, and the use of underground space forms the main direction of engineering solutions. Findings. A promising direction for the development of the use of the subway as a civil defense storage facility is the renovation and arrangement of tunnels not involved in transport and auxiliary operations, which can significantly increase the capacity of such storage facilities and improve the living conditions of people. Methods of renovation and arrangement of subway tunnels, cost-effective constructive solutions and methods of construction of civil defense structures. Originality. The differentiation of underground protective objects was carried out according to the principle of protection against air strikes in cases of direct and indirect (remote from the perimeter of the underground structure) pot-raping ammunition. For the first time, frameworks made of soil concrete, formed by jet cementation of soils, are considered as retaining structures capable of perceiving, in particular, dynamic (explosive) loads. Practical value. Effective introduction into the practice of underground construction of advanced technical solutions and methods of renovation and adaptation to the storage functions of existing underground structures, construction of protective structures using innovative methods, in particular, using soil concrete. Wide development of construction techniques of jet cementation of soils gives reason to believe that mastering a new method of erecting underground structures from soil concrete will not cause complications and will not take much time.


  • Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool

    by O. P. Vynohradova, O. S. Vasylchuk, A. L. Maystrenko, A. P. Zakora, V. M. Tkach, V. V. Vapnichna, G. D. Ilnytska, N. A. Oliinyk, V. V. Bilorusets, O. P. Liudvichenko, et al.

  • Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool

    by O. P. Vynohradova, О. S. Vasylchuk, А. L. Maystrenko, А. P. Zakora, V. М. Tkach, V. V. Vapnichna, G. D. Ilnitska, N. О. Oliinyk, V. V. Belorusets, O. P. Liudvichenko, et al.

    The zone of interaction of the rock roughness element with the surface of the matrix mate­rial Ni (94%)–Sn (6%) of the rock-cutting tool, equipped with diamonds of grain size 500/400 and their relative concentration of 100%, in the wear particle of the matrix mate­rial is considered. In the zone of indenter penetration in this wear particle a system of microcracks originating at the place of direct contact of the indenter with the surface of the matrix and branches in the direction of indenter penetration into the matrix surface was found. The material of the matrix wears out brittle and one of the methods of microindentation of the brittle diamond-containing matrix surface under dynamic loading is “micro-impacts” of the rock roughness elements on its surface with the subsequent delami­nation of discrete particles, the projection of which is similar to the projection of “swallow tail”.

  • Experimental Solving the Problem of the Shelter Object Reinforced Concrete Structures Thermal Expansion

    by Yuriy Slyusarenko, Volodymyr Tytarenko, Nina Kosheleva, Iegor Kostochka, Vladyslav Shekhovtsov, Ihor Yakovenko, Oleg Fesenko, Viktoriia Vapnichna, Sergii Iskov, Iurii Kaliukh


  • Open Access

    ON THE DESTRUCTION AND PREFRACTURING OF SOLID ROCKS UNDER BLASTING IN FORMATION CONDITIONS

    by Yu Voitenko, Viktoria Vapnichna, O. Voitenko

    Мета та завдання. Аналіз та уточнення механізмів розміцнення та зміни структури монолітних і малотріщинуватих ГП при вибухах одиночних і розосереджених зарядів, визначення причин та модель їх еволюції у пласті. Для вирішення поставленої мети в роботі були поставленні наступні наукові задачі: 1. Оцінка силових чинників зовнішньої дії на гірську породу. 2. Термодинамічний аналіз і виявлення механізмів структурних змін в ГП на значній відстані від свердловини, які забезпечують зміну її продуктивності. Методи дослідження. Для розв’язання поставлених задач було проведено: розрахунки згасання амплітуд ударних хвиль, які генеруються під час вибуху зосереджених і подовжених зарядів; аналіз результатів вибухових обробок нафтових, нафтогазових і газових свердловин з позицій підземної гідродинаміки і механіки гірських порід; енергетичний аналіз процесів та механізмів змін, які відбуваються навколо свердловини в пласті. Основні результати. Під час проведення досліджень було встановлено, що структурні зміни в ГП під час вибухів зарядів малої енергії, а також інших малоенергетичних методів зовнішньої дії на пласт відбуваються у вигляді розростання тріщинуватості ГП на мікро- і макрорівнях завдяки кооперативним ефектам від зовнішньої дії, внутрішньої енергії пласта і фізико-хімічному впливу пластових флюїдів. В роботі розглянуто механізми знеміцнення гірських порід в пластових умовах за наявності гірського і пластового тиску при малоенергетичних зовнішніх впливах. Експериментально на прикладах роботи нафтових, нафтогазових і газових свердловин показано, що перехід системи «свердловина – пласт» із одного термодинамічного стану в інший відбувається за час, який залежить від внутрішньої енергії пласта. Перехід – результат дії кооперативних ефектів сумісної дії зовнішнього впливу, внутрішньої енергії пласта і гірського тиску. Для газових свердловин цей час не перевищує кількох годин, або днів, для нафтових і нафтогазових з глибинами залягання пластів 3000…4000 м характерний час виходу свердловини на максимальну продуктивність складає ≈ (30 – 90) днів. Висновки та практичне значення. У результаті проведеного аналізу, в умовах промислових випробувань вибухової технології - інтенсифікації, а також на основі розрахунків згасання та стиснення хвильових амплітуд досліджено, що в умовах дії гірського тиску спостерігаються характерні структурні зміни у ГП, що обумовлено результатом вибуху кількох зарядів, які відбуваються на відстані до ≈ (80…100) R0. У пластових умовах основною причиною появи таких протяжних зон підвищеної проникності навколо свердловини є кооперативні ефекти від спільної дії вибухових хвиль, пластових газів (метан, діоксид вуглецю, гелій і, можливо, водень), а також зміна гірського тиску в пласті при зниженні рівня рідини в свердловині в процесі її освоєння. Практичне значення полягає у розумінні черговості технологічних операцій при проведенні роботи з інтенсифікації припливу нафти і газу.


  • Open Access

    ON THE CRACK PROPAGATION IN STRUCTURAL MATERIALS AND ROCKS FROM THE STANDPOINT OF SYNERGETICS

    by Yuri Voitenko, Viktoriia Vapnichna

    Purpose: The aim of the work is to analyze from the standpoint of the principles of synergetics the experimental results of the destruction of solid polymers, steels and rocks.Methodology: To analyze experimental data on the propagation of fracture cracks during quasi-static and pulse stretching and bending of samples of solid polymers (PMMA), steels and concrete, taking into account the stock of elastic or elastic-plastic energy at the time of failure. Analyze the shape and quantitative characteristics of dissipative structures that are formed in a solid body when the crack propagates through the material.Findings: Analysis of the distribution modes of county and fast trainings in polymeric materials (PMMA), tool steels and concrete according to different schemes and modes of loading samples shows that the abrupt nature of their movement with periodic trading speed of private or zero is the basis of genealogical organization. The nature of this phenomenon is based on the principles of synergetic, which determine the principle of minimum energy production.Originality: It is shown that the patterns of crack propagation in solid polymers, metals and rocks have a synergistic nature. A working hypothesis on the synergetic mechanism of softening and deformation control of brittle dilatation rocks near underground plants is formulated.Practical implications: It is shown that the nature of the distribution of county cracks during PMMA fracturing, as well as rapid cracks during pulse stretching and bending flat samples of PMMA and the capital as a whole are subject to energy principles, in particular the principle of minimum energy production. It is obvious that for the qualitative and quantitative description of structural changes and destructive deformation of rocks near underground cultivations there is a lack of models of solid environment mechanics. In practice, you need to listen to the abrupt nature of the processes and cooperative effects.