Carsten Svaneborg
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Carsten Svaneborg has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Ralf Everaers
ENS de Lyon, CNRS, Laboratoire de Physique (LPENSL UMR5672) et Centre Blaise Pascal 2 , 69342 Lyon cedex 07
13 shared publications Gary S. Grest
Sandia National Laboratories
7 shared publications- Jan Skov Pedersen
Aarhus University
4 shared publications Hossein Ali Karimi-Varzaneh
Continental Reifen Deutschland GmbH, Jädekamp 30, D-30419 Hannover, Germany
3 shared publicationsJohn G. Curro
Department of Chemistry and Interdisciplinary Nanoscience Center (iNANO), University of Aarhus, Langelandsgade 140, DK-8000 Århus, Denmark, Laboratoire de Physique, École Normale Supérieure de Lyon, CNRS UMR 5672, Université de Lyon, 46 allée d’Italie, 69364 Lyon Cedex 07, France, Sandia National Laboratories, Albuquerque, New Mexico 87185, and Department of Chemical & Nuclear Engineering, University of New Mexico, Albuquerque, New Mexico 87131
3 shared publications- Adi Constantinescu
Center for Fundamental Living Technology (FLinT), Department for Physics, Chemistry and Pharmacy, University of Southern Denmark, Campusvej 55, 5230 Odense, Denmark
2 shared publications
Latest Publications
- 11 May 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (18)
Plateau moduli of Kremer–Grest models for commodity polymer melts
We estimate the plateau moduli of end-pinned bead-spring polymer melts with Z = 100 and Z = 200 entanglements per chain from the time-dependent elastic response to a step strain, which we first extrapolate to infinite time and then interpolate to zero strain. We present data for systems deformed in the melt state and for systems deformed at the primitive path level following the recent inverse primitive path analysis protocol. We observe excellent agreement between the plateau moduli obtained via the two deformation protocols and good agreement with the available experimental data for commodity polymer melts using a common mapping on the Kuhn scale.
- 11 May 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (18)
Plateau moduli of Kremer–Grest models for commodity polymer melts
We estimate the plateau moduli of end-pinned bead-spring polymer melts with Z = 100 and Z = 200 entanglements per chain from the time-dependent elastic response to a step strain, which we first extrapolate to infinite time and then interpolate to zero strain. We present data for systems deformed in the melt state and for systems deformed at the primitive path level following the recent inverse primitive path analysis protocol. We observe excellent agreement between the plateau moduli obtained via the two deformation protocols and good agreement with the available experimental data for commodity polymer melts using a common mapping on the Kuhn scale.
- Open Access
- 28 February 2025
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 58 (2) , 603-608
SAStutorials.org – online tutorials on small-angle scattering data analysis
Small-angle X-ray and neutron scattering (SAXS and SANS) are versatile techniques for studying the structure of various materials and particles, enabling investigations of structures from a few to hundreds of nanometres. However, interpreting SAXS or SANS data can be challenging, hence the need for effective training. Here, we present the website SAStutorials.org, which offers tutorials on small-angle scattering (SAS) data analysis. The website serves as a learning platform that supports active learning both in the classroom and through self-study. The tutorials cover basic concepts, advanced modelling and theoretical aspects of SAS. Each tutorial follows a structure based on the principle of SOLO taxonomy, guiding learners from minimal or no knowledge in a given area to the ability to tackle real-world problems. SAStutorials.org has been developed as a community tool, providing tutorials that encompass a broad range of data analysis types, leveraging various programs and investigating different materials. Moreover, the website and all its data are open source, encouraging contributions from the community.
- 28 February 2025
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 58 (2) , 603-608
Open AccessSAStutorials.org – online tutorials on small-angle scattering data analysis
Small-angle X-ray and neutron scattering (SAXS and SANS) are versatile techniques for studying the structure of various materials and particles, enabling investigations of structures from a few to hundreds of nanometres. However, interpreting SAXS or SANS data can be challenging, hence the need for effective training. Here, we present the website SAStutorials.org, which offers tutorials on small-angle scattering (SAS) data analysis. The website serves as a learning platform that supports active learning both in the classroom and through self-study. The tutorials cover basic concepts, advanced modelling and theoretical aspects of SAS. Each tutorial follows a structure based on the principle of SOLO taxonomy, guiding learners from minimal or no knowledge in a given area to the ability to tackle real-world problems. SAStutorials.org has been developed as a community tool, providing tutorials that encompass a broad range of data analysis types, leveraging various programs and investigating different materials. Moreover, the website and all its data are open source, encouraging contributions from the community.
- Open Access
- 17 April 2024
- Published by Elsevier in Computer Physics Communications
- Vol. 300
Inverse primitive path analysis
- 17 April 2024
- Published by Elsevier in Computer Physics Communications
- Vol. 300
Open AccessInverse primitive path analysis
- Open Access
- 31 March 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (2) , 587-601
SEB: a computational tool for symbolic derivation of the small-angle scattering from complex composite structures
Analysis of small-angle scattering (SAS) data requires intensive modeling to infer and characterize the structures present in a sample. This iterative improvement of models is a time-consuming process. Presented here is Scattering Equation Builder (SEB), a C++ library that derives exact analytic expressions for the form factors of complex composite structures. The user writes a small program that specifies how the sub-units should be linked to form a composite structure and calls SEB to obtain an expression for the form factor. SEB supports e.g. Gaussian polymer chains and loops, thin rods and circles, solid spheres, spherical shells and cylinders, and many different options for how these can be linked together. The formalism behind SEB is presented and simple case studies are given, such as block copolymers with different types of linkage, as well as more complex examples, such as a random walk model of 100 linked sub-units, dendrimers, polymers and rods attached to the surfaces of geometric objects, and finally the scattering from a linear chain of five stars, where each star is built up of four diblock copolymers. These examples illustrate how SEB can be used to develop complex models and hence reduce the cost of analyzing SAS data.
- 31 March 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (2) , 587-601
Open AccessSEB: a computational tool for symbolic derivation of the small-angle scattering from complex composite structures
Analysis of small-angle scattering (SAS) data requires intensive modeling to infer and characterize the structures present in a sample. This iterative improvement of models is a time-consuming process. Presented here is Scattering Equation Builder (SEB), a C++ library that derives exact analytic expressions for the form factors of complex composite structures. The user writes a small program that specifies how the sub-units should be linked to form a composite structure and calls SEB to obtain an expression for the form factor. SEB supports e.g. Gaussian polymer chains and loops, thin rods and circles, solid spheres, spherical shells and cylinders, and many different options for how these can be linked together. The formalism behind SEB is presented and simple case studies are given, such as block copolymers with different types of linkage, as well as more complex examples, such as a random walk model of 100 linked sub-units, dendrimers, polymers and rods attached to the surfaces of geometric objects, and finally the scattering from a linear chain of five stars, where each star is built up of four diblock copolymers. These examples illustrate how SEB can be used to develop complex models and hence reduce the cost of analyzing SAS data.
- Open Access
Inverse Primitive Path Analysis
The primitive-path analysis (PPA) {[}R. Everaers et al. Science 303, 823, (2004){]} is an algorithm that transforms a model polymer melt into its topologically equivalent mesh by removing excess contour length stored in thermal fluctuations. Here we present an inverse PPA algorithm that gradually reintroduces contour length in a PPA mesh to produce an topologically equilvalent polymer melt. This enables the generation of model polymer materials with well controlled topology. As an illustration, we generate knitted model polymer materials with a 2D cubic lattice of entanglement points using a synthetic PPA mesh as a starting point. We also show how to combine PPA and inverse PPA to accelerate stress relaxation approximately by an order of magnitude in simulation time. This reduces the computational cost of computational studies of structure-property relations for polymer materials.
Open AccessInverse Primitive Path Analysis
The primitive-path analysis (PPA) {[}R. Everaers et al. Science 303, 823, (2004){]} is an algorithm that transforms a model polymer melt into its topologically equivalent mesh by removing excess contour length stored in thermal fluctuations. Here we present an inverse PPA algorithm that gradually reintroduces contour length in a PPA mesh to produce an topologically equilvalent polymer melt. This enables the generation of model polymer materials with well controlled topology. As an illustration, we generate knitted model polymer materials with a 2D cubic lattice of entanglement points using a synthetic PPA mesh as a starting point. We also show how to combine PPA and inverse PPA to accelerate stress relaxation approximately by an order of magnitude in simulation time. This reduces the computational cost of computational studies of structure-property relations for polymer materials.
- Open Access
A computational tool for symbolic derivation of the small angle scattering from complex composite structures
Analysis of small angle scattering (SAS) data requires intensive modelling to infer and characterize the structures present in a sample. This iterative improvement of models is a time consuming process. Here we present the Scattering Equation Builder (SEB), a C++ library that derives exact analytic expressions for the form factor of complex composite structures. The user writes a small program that specifies how sub-units should be linked to form a composite structure and calls SEB to obtain an expression for the form factor. SEB supports e.g. Gaussian polymer chains and loops, thin rods and circles, solid spheres, spherical shells and cylinders, and many different options for how these can be linked together. In the present paper, we present the formalism behind SEB, and give simple case studies such as block-copolymers with different types of linkage and more complex examples such as a random walk model of $100$ linked sub-units, dendrimers, polymers and rods attached to surfaces of geometric objects, and finally the scattering from a linear chain of 5 stars, where each star is build by four diblock copolymers. These examples illustrate how SEB can be used to develop complex models and hence reduce the cost of analyzing SAS data.Open AccessA computational tool for symbolic derivation of the small angle scattering from complex composite structures
Analysis of small angle scattering (SAS) data requires intensive modelling to infer and characterize the structures present in a sample. This iterative improvement of models is a time consuming process. Here we present the Scattering Equation Builder (SEB), a C++ library that derives exact analytic expressions for the form factor of complex composite structures. The user writes a small program that specifies how sub-units should be linked to form a composite structure and calls SEB to obtain an expression for the form factor. SEB supports e.g. Gaussian polymer chains and loops, thin rods and circles, solid spheres, spherical shells and cylinders, and many different options for how these can be linked together. In the present paper, we present the formalism behind SEB, and give simple case studies such as block-copolymers with different types of linkage and more complex examples such as a random walk model of $100$ linked sub-units, dendrimers, polymers and rods attached to surfaces of geometric objects, and finally the scattering from a linear chain of 5 stars, where each star is build by four diblock copolymers. These examples illustrate how SEB can be used to develop complex models and hence reduce the cost of analyzing SAS data. - 1 February 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 158 (5) , 054903
Multiscale equilibration of highly entangled isotropic model polymer melts
We present a computationally efficient multiscale method for preparing equilibrated, isotropic long chain model polymer melts. As an application we generate Kremer-Grest melts of $1000$ chains with $200$ entanglements and $25000$-$2000$ beads per chain, which cover the experimentally relevant bending rigidities up to and beyond the limit of the isotropic-nematic transition. In the first step, we employ Monte Carlo simulations of a lattice model to equilibrate the large-scale chain structure above the tube scale while ensuring a spatially homogeneous density distribution. We then use theoretical insight from a constrained mode tube model to introduce the bead degrees of freedom together with random walk conformational statistics all the way down to the Kuhn scale of the chains. This is followed by a sequence of simulations with carefully parameterized force-capped bead-spring models, which slowly introduce the local bead packing while reproducing the larger scale chain statistics of the target Kremer-Grest system at all levels of force-capping. Finally we can switch to the full Kremer-Grest model without perturbing the structure. The resulting chain statistics is in excellent agreement with literature results on all length scales accessible in brute-force simulations of shorter chains.- 1 February 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 158 (5) , 054903
Multiscale equilibration of highly entangled isotropic model polymer melts
We present a computationally efficient multiscale method for preparing equilibrated, isotropic long chain model polymer melts. As an application we generate Kremer-Grest melts of $1000$ chains with $200$ entanglements and $25000$-$2000$ beads per chain, which cover the experimentally relevant bending rigidities up to and beyond the limit of the isotropic-nematic transition. In the first step, we employ Monte Carlo simulations of a lattice model to equilibrate the large-scale chain structure above the tube scale while ensuring a spatially homogeneous density distribution. We then use theoretical insight from a constrained mode tube model to introduce the bead degrees of freedom together with random walk conformational statistics all the way down to the Kuhn scale of the chains. This is followed by a sequence of simulations with carefully parameterized force-capped bead-spring models, which slowly introduce the local bead packing while reproducing the larger scale chain statistics of the target Kremer-Grest system at all levels of force-capping. Finally we can switch to the full Kremer-Grest model without perturbing the structure. The resulting chain statistics is in excellent agreement with literature results on all length scales accessible in brute-force simulations of shorter chains.- Open Access
Multiscale equilibration of highly entangled isotropic model polymer melts
We present a computationally efficient multiscale method for preparing equilibrated, isotropic long chain model polymer melts. As an application we generate Kremer-Grest melts of $1000$ chains with $200$ entanglements and $25000$-$2000$ beads per chain, which cover the experimentally relevant bending rigidities up to and beyond the limit of the isotropic-nematic transition. In the first step, we employ Monte Carlo simulations of a lattice model to equilibrate the large-scale chain structure above the tube scale while ensuring a spatially homogeneous density distribution. We then use theoretical insight from a constrained mode tube model to introduce the bead degrees of freedom together with random walk conformational statistics all the way down to the Kuhn scale of the chains. This is followed by a sequence of simulations with carefully parameterized force-capped bead-spring models, which slowly introduce the local bead packing while reproducing the larger scale chain statistics of the target Kremer-Grest system at all levels of force-capping. Finally we can switch to the full Kremer-Grest model without perturbing the structure. The resulting chain statistics is in excellent agreement with literature results on all length scales accessible in brute-force simulations of shorter chains.Open AccessMultiscale equilibration of highly entangled isotropic model polymer melts
We present a computationally efficient multiscale method for preparing equilibrated, isotropic long chain model polymer melts. As an application we generate Kremer-Grest melts of $1000$ chains with $200$ entanglements and $25000$-$2000$ beads per chain, which cover the experimentally relevant bending rigidities up to and beyond the limit of the isotropic-nematic transition. In the first step, we employ Monte Carlo simulations of a lattice model to equilibrate the large-scale chain structure above the tube scale while ensuring a spatially homogeneous density distribution. We then use theoretical insight from a constrained mode tube model to introduce the bead degrees of freedom together with random walk conformational statistics all the way down to the Kuhn scale of the chains. This is followed by a sequence of simulations with carefully parameterized force-capped bead-spring models, which slowly introduce the local bead packing while reproducing the larger scale chain statistics of the target Kremer-Grest system at all levels of force-capping. Finally we can switch to the full Kremer-Grest model without perturbing the structure. The resulting chain statistics is in excellent agreement with literature results on all length scales accessible in brute-force simulations of shorter chains. - Open Access
Interaction Patterns for Staggered Assembly of Fibrils from Semiflexible Chains
The design of colloidal interactions to achieve target self-assembled structures has especially been done for compact objects such as spheres with isotropic interaction potentials, patchy spheres and other compact objects with patchy interactions. Inspired by the self-assembly of collagen-I fibrils and intermediate filaments, we here consider the design of interaction patterns on semiflexible chains that could drive their staggered assembly into regular (para)crystalline fibrils. We consider semiflexible chains composed of a finite number of types of interaction beads (uncharged hydrophilic, hydrophobic, positively charged and negatively charged) and optimize the sequence of these interaction beads with respect to the interaction energy of the semiflexible chains in a number of target-staggered crystalline packings. We find that structures with the lowest interaction energies, that form simple lattices, also have low values of L/D (where L is chain length and D is stagger). In the low interaction energy sequences, similar types of interaction beads cluster together to form stretches. Langevin Dynamics simulations confirm that semiflexible chains with optimal sequences self-assemble into the designed staggered (para)crystalline fibrils. We conclude that very simple interaction patterns should suffice to drive the assembly of long semiflexible chains into staggered (para)crystalline fibrils.
Open AccessInteraction Patterns for Staggered Assembly of Fibrils from Semiflexible Chains
The design of colloidal interactions to achieve target self-assembled structures has especially been done for compact objects such as spheres with isotropic interaction potentials, patchy spheres and other compact objects with patchy interactions. Inspired by the self-assembly of collagen-I fibrils and intermediate filaments, we here consider the design of interaction patterns on semiflexible chains that could drive their staggered assembly into regular (para)crystalline fibrils. We consider semiflexible chains composed of a finite number of types of interaction beads (uncharged hydrophilic, hydrophobic, positively charged and negatively charged) and optimize the sequence of these interaction beads with respect to the interaction energy of the semiflexible chains in a number of target-staggered crystalline packings. We find that structures with the lowest interaction energies, that form simple lattices, also have low values of L/D (where L is chain length and D is stagger). In the low interaction energy sequences, similar types of interaction beads cluster together to form stretches. Langevin Dynamics simulations confirm that semiflexible chains with optimal sequences self-assemble into the designed staggered (para)crystalline fibrils. We conclude that very simple interaction patterns should suffice to drive the assembly of long semiflexible chains into staggered (para)crystalline fibrils.
- 7 August 2020
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 53 (16) , 6907-6927
Computational Study of Cross-Link and Entanglement Contributions to the Elastic Properties of Model PDMS Networks
- 7 August 2020
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 53 (16) , 6907-6927
Computational Study of Cross-Link and Entanglement Contributions to the Elastic Properties of Model PDMS Networks