MRMartín Eduardo Rodríguez-Franco

Martín Eduardo Rodríguez-Franco

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Martín Eduardo Rodríguez-Franco has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Principles of speckle pattern correlation for fiber optic sensors

    by Yadira Fabiola López-Álvarez, Francisco Gerardo Peña-Lecona, Martín Eduardo Rodríguez-Franco, Ricardo Jara-Ruiz

    A key challenge in robotic navigation is the complexity of localization algorithms, the need to implement more robust sensors, and the ability to adapt to environments with unfavorable lighting conditions. To meet these needs, technologies and techniques based on laser, vision, and multisensor fusion have been developed; however, these also present challenges due to environmental conditions. This work aims to study the statistical and spatial intensity characteristics of a speckle pattern obtained at the output of a rotating optical fiber. Intensity distribution and image classification are used to establish its characteristics. The results indicate that it is feasible to develop a robotic localization model based on the statistical and spatial characteristics of the speckle patterns generated at the output of the optical fiber. Furthermore, the findings demonstrate that the optical fiber can serve as a diffusive medium capable of monitoring variations on the positioning system

  • Open Access

    Expansion and improvement of modular workstation for advanced PLC analysis and operation

    by Martín Eduardo Rodríguez-Franco, Ricardo Jara-Ruiz, Luis Gerardo Zacarías-Rodríguez, Yadira Fabiola López-Álvarez

    This work provides continuity to the development of a modular workstation for the advanced operation of the programmable logic controller (PLC), through incorporation of the functions of master-slave communication, proportionalintegral-derivative (PID) controller and high-speed counters (HSC); and its use as a support element for teaching process of related topics. The operation of the workstation constituted from the integration of a speed control system in a threephase alternating current motor is analyzed; whose test parameters are entered from a graphical interface executed through a touch screen. Such application was implemented through a communication network between controllers; in addition, it uses a variable frequency drive (VFD) and an encoder as power and perception elements, respectively. The performance observed during the tests carried out confirms an adequate follow-up of assigned parameters, by reaching and settling real response of system in these. While, with regard to the use of the developed modular workstation as a teaching tool for analysis of advanced automation solutions, its relevance is confirmed.

  • Open Access

    Optical fiber encoder based on phase shifting interferometry

    by Yadira Fabiola López-Álvarez, Francisco Gerardo Peña-Lecona, Jesús Muñoz-Maciel, Martín Eduardo Rodríguez-Franco

    In an automated industrial system monitoring and controlling the position of moving objects represents a crucial element in processes that have rotating systems.This is regularly in robots that use internal sensors to monitor the position of their joints. In this work we present the study of an optical encoder based on a Mach Zehnder interferometer. To determine the phase, the Phase Shift Interferometry algorithm was use, using five steps. The optical fiber encoder used the rotation matrix, and the results were correlated with those obtained by the optical technique, the reported behavior shows a wide similarity between the optical encoder and the simulated. The experimental design showed a differential distance of 0.0452 rad between the initial and that obtained after deformation. We report an encoder capable of recovering the initial phase, showing a difference in the correlation of 0.0000925 u.a.

  • Open Access

    Measurement of refractive index in liquid mixtures using interferometry

    by Yadira Fabiola López-Álvarez, Francisco Gerardo Peña-Lecona, Ricardo Jara-Ruiz, Martín Eduardo Rodríguez-Franco

    The main parameters that govern the changes in the speed of light when interacting with matter are polarizability and electronic density. The first relates to the ability of a group of atoms to deform under the action of an electromagnetic field, while the second is directly linked to the mass of the substance. If a beam of reference light and another that is incident in the medium whit molecular variation are superimposed, they will be producing a pattern of interference fringes by the phase shift. In this paper we report the results obtained in the measurement of the change in refractive index of liquids substances using patterns of interference fringes. To check the applicability of the technique, two mixtures of different liquid substances were used in the experiment. Water and gasoline were used as solvents and ethanol and gasoline additive were used as solutes, each at different percentages. The results suggest that it is feasible to analyze the variation of the concentration, density and change of refractive index of a substance, through the direct relationship between the molecular changes of the substance analyzed and the phase difference.

  • Open Access

    Closed-loop Speed Control for a Three-Phase Alternating-Current Motor using a Modbus Network

    by Martín Rodríguez, Ricardo Jara, Mario Baes, Yadira López, Santos Orozco

    This paper presents a closed-loop controller for speed regulation of a three-phase induction motor by means of a Modbus network, which is compound only by industrial-purpose hardware, namely two programmable logic controllers, a human-machine interface and a variable-frequency drive. This represents a step beyond the state of the art because the results in similar works reported in the literature were obtained using personal computers, academic-purpose hardware or a combination of both academic-industrial technologies. The speed regulation was achieved through a proportionalintegral controller executed in a programmable logic controller, whose feedback was supplied by another similar device completely dedicated to read and decode an industrial optical encoder; furthermore, the control signals were commanded to the alternating current motor using a variable-frequency drive. The proposed control network was tested through diverse regulation experiments, under different conditions, in order to assess its effectiveness and robustness. The obtained results were successful in terms of accuracy of the speed set-point tracking in comparison to the most similar works of the state of the art, namely zero steady-state error was achieved, 12 seconds earlier for 75% larger references and 22% less RMSE than other works, which are the best results reported so far. Such successful achievements encourage the later implementation of more advanced control techniques on three-phase-motor based industrial machinery using only industrial-purpose hardware.

  • Open Access

    Implementation of a system for classifying moving parts by color

    by Martín Eduardo Rodríguez-Franco, Yadira Fabiola López-Álvarez, Ricardo Jara-Ruiz, Santos Miguel Orozco-Soto

    The purpose of this study is the development and implementation of a computer vision system for color identification in a set of parts, which were disposed on a continuously moving conveyor belt. The process for acquiring the images associated with the parts at issue, the preprocessing and treatment phases performed, as well as the results of the recognition of the feature of interest in each of these are exposed. It is worthy to mention that the feature of interest in the analyzed parts was established from three classes different, associated with the primary colors. The results obtained suggest the effectiveness of the implemented vision system, even as a prototype; which was integrated using low-cost and easy-to-use materials, and whose programming was developed in the open-source software Python, using the OpenCV library. Not only an effective recognition of the class corresponding to each part entered is highlighted, but also the possibility that said operation be executed without the conveyor belt used stopping its moving.

  • Open Access

    Integration and programming of delta-type parallel robot prototype

    by Martín Eduardo Rodríguez-Franco, Ricardo Jara-Ruiz, Yadira Fabiola López-Álvarez, Jorge Delgado-Aguilera

    The development of the present study focuses on the exploration of the parallel robot in delta configuration, highly applied in the industrial environment, in order to integrate a prototype that concentrates the basic characteristics of its function. The constitution of the exposed implement implied the use of materials and devices of easy acquisition and low cost. Likewise, a detailed analysis of the respective mechanical structure and its operation was necessary, in reference to both the way and the medium through which the movement generated by the actuators is managed, to be transmitted to the end effector. The incorporation of the Arduino electronic board as the robot controller is reported, which contains the established programming to ensure its correct operation, given the instructions entered by the user from a computer. The results observed during the performance tests confirm the effective adoption of the joint values assigned by the user, within the mobility limits imposed; even at the level of a prototype.

  • Open Access

    Development of interface for kinematic analysis of a delta-type parallel robot

    by Martín Eduardo Rodríguez-Franco, Ricardo Jara-Ruiz, Yadira Fabiola López-Álvarez, Juan Carlos García-Rodríguez

    The development and implementation process of a computer interface for the kinematic analysis of a parallel robot, in delta configuration, and its application to a previously formed prototype are exposed. Being identified the associated equations, and deduced the respective geometric parameters. On the other hand, the synthesis of the direct and inverse kinematic models, with the Matlab software, guarantees the calculation of a specific Cartesian position, in the end effector of the robot used, once certain joint values have been assigned to it, or vice versa. Finally, a user-friendly graphical interface is created, whose functions are: data entry, resolution of the models described, issuance of the corresponding results, representation of the robot used and its physical manipulation. The results obtained in the real location of the end effector with respect to the values deduced by the interface, are competitive for both models analyzed, even though the prototype used operates by means of servomotors. An average position error of 0.083 cm per axis and overall of 0.006 cm is observed during the tests developed.

  • Open Access

    Enabling experimental greenhouse for high-tech application

    by Martín Eduardo Rodríguez-Franco, Víctor Arturo Maldonado-Ruelas, Francisco Javier Villalobos-Piña, Raúl Arturo Ortiz-Medina

    This work exposes the conditioning of the zenith greenhouse of the Polytechnic University of Aguascalientes for its conformation as a high-tech entity, through the adaptation of sensors, actuators and a controller, which ensure the supervision of the environmental conditions inside, mainly established by the variables of temperature and humidity. The development and application of a computer graphical interface is presented as an intuitive tool for monitoring and controlling the field devices used, and therefore, the environmental conditions provided or recorded from their activation. Likewise, the use of the open communication standard OPC is demonstrated as an alternative for effective interaction between the LabVIEW software, from which the management interface was developed, and the PLC, used as the system controller. The results achieved provide proof of the adequate operation of the devices adapted in the greenhouse installation, the compilation of the information associated with the performance of their task and the manipulation of their operation or reading, from the graphical interface developed for this purpose.

  • Open Access

    Parametric design applied to die cutting machine

    by Ricardo Jara-Ruiz, Jesús De La Cruz, Martín Eduardo Rodríguez-Franco, Sergio Humberto Delgado-Guerrero

    In this paper, the particularities of applying parameterization in industrial machines corresponding to the manufacturing area are exposed and analyzed. For its development, the parameterized design of a die cutting machine is proposed as an object of study, which is formulated from the main elements considered of importance in the principle of operation, being necessary to carry out a prior investigation to analyze it and how the parameterization process influences. Parameterization is a quality of the components to adapt flexibly to the needs of the industry or sector, facilitating the redesign and manufacturing process, allowing the desired dimensional update or adjustment to be carried out only to the central component and the others are automatically adapted. Attending to the current needs and trends of the fourth industrial revolution, as well as establishing the benefits of this type of flexible design processes to expand their implementation to different industrial machines such as robot configurations.