Yucun Zhou

Yucun Zhou

*This is an algorithmically generated author record based on publicly available information.

Yucun Zhou has a total of 158 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Low-temperature densification of constrained GDC interlayers via chemo-mechanical regulation for stable solid oxide fuel cells

    by Fuhuan Wang, Yuechao Yao, Yucan Liu, Weifeng Zhang, Yanmin Wang, Xiaojie Cheng, Jun Zhang, Yucun Zhou, Liangfei Xu, Shaorong Wang, et al.

    The constrained densification of ceramic interlayers in solid oxide fuel cells (SOFCs) is strongly influenced by the interplay between constraint effects and diffusion kinetics. While elevated sintering temperatures are commonly employed to overcome stress-retarded densification, they simultaneously accelerate interfacial interdiffusion and reaction-layer formation, creating a long-standing trade-off between microstructural integrity and chemical stability. Here, we demonstrate a chemo-mechanical regulation strategy that effectively mitigates the conflict between these competing processes through concurrent enhancement of sintering kinetics and regulation of green-state packing homogeneity. By combining Co3O4-assisted sintering activation with cold isostatic pressing (CIP), ultrathin Gd-doped ceria (GDC) interlayers achieve an apparent relative density of 98.5% after constrained sintering, enabling densification at 1200 °C, below the temperatures commonly reported for constrained GDC films processed without sintering activation. The resulting dense and continuous interlayer limits Ce–Zr interdiffusion during fabrication and mitigates Sr-related interfacial reactions and reaction-layer formation during operation. Consequently, the optimized anode-supported SOFC delivers a peak power density of 1.36 W·cm−2 at 800 °C and exhibits a normalized degradation rate of 0.48% per 1000 h, calculated from the stabilized 200–460 h operation period at 750 °C. Accelerated thermal aging at 850 °C for 600 h further supports the stability of the engineered heterointerface. The chemo-mechanical strategy was successfully extended to 10 cm × 10 cm cells, supporting their compatibility with scalable wet-processing routes. This work provides a chemo-mechanical perspective for mitigating the interplay between constrained densification and interfacial reactivity in multilayer ceramic systems.


  • A/B‐Site Dual Doping of YbFeO 3 ‐Based Orthorhombic Perovskites for Activity‐Stability Balanced Air Electrodes in Reversible Solid Oxide Fuel Cells

    by Chaofan Yin, Zilin Zhou, Zixuan Xue, Yueyue Sun, Yanmin Wang, Qiang Xue, Yuechao Yao, Lei Fu, Jun Zhou, Yucun Zhou, et al.

    Reversible solid oxide fuel cells (RSOCs) require air electrodes that are active for both oxygen reduction and oxygen evolution reactions while resisting degradation under operating conditions. YbFeO 3 (YbFO) offers a robust orthorhombic perovskite framework with moderate thermal expansion, but its intrinsic electrode activity remains limited. Here, we report a series of YbFO‐based orthorhombic perovskite air electrodes through A/B‐site dual doping. The optimized Yb 0.7 Sm 0.3 Fe 0.4 Co 0.6 O 3 (YbSFC) exhibits a low polarization resistance of 0.08 Ω cm 2 at 700°C and a suitable thermal expansion coefficient of 12.22 × 10 −6 K −1 . In proton‐conducting RSOCs, the YbSFC air electrode delivers a peak power density of 1.12 W cm −2 in fuel cell mode and a current density of 2.55 A cm −2 at 1.3 V in electrolysis mode at 700°C. The cell also operates stably for over 200 h in fuel cell mode. In addition, when applied in oxygen‐ion‐conducting RSOCs, the same air electrode reaches a peak power density of 0.93 W cm −2 in fuel cell mode and a current density of ‐0.96 A cm −2 at 1.3 V in electrolysis mode at 800°C. These results show that YbFO‐based orthorhombic perovskites can serve as effective and durable air electrodes for RSOCs.

  • Dual‐Doping Induced Synergistic Functionality in a Perovskite Air Electrode for Balanced Performance and Durability in Reversible Protonic Ceramic Cells

    by Qiang Xue, Chenxiao Wang, Ting Chen, Guangjun Zhang, Chaofan Yin, Fengxue Zhang, Yucun Zhou, Xuesong Shen, Lang Xu, Shaorong Wang

    The development of high‐performance air electrodes for reversible protonic ceramic cells (RPCCs) is constrained by the inherent trade‐off between electrocatalytic activity and operational stability. To address this challenge, a dual‐doping strategy was employed to dop Ti and Nb into PrBaCo 2 O 5+δ , resulting in a novel triple‐conducting (H + /O 2− /e − ) perovskite air electrode, PrBaCo 1.8 Ti 0.1 Nb 0.1 O 5+δ (PBCTN). The comprehensive characterization study demonstrates that the PBCTN oxide exhibits outstanding stability under high‐temperature and high‐humidity environments and show a polarization resistance as low as 0.06 Ω cm 2 at 700°C. Density functional theory calculations reveal that optimized hydration energy, a more favorable O 2p band center, and accelerated surface reactions enhance the oxygen reduction and evolution kinetics. Through this design, the RPCC with the PBCTN air electrode achieves a peak power density of 1.12 W cm −2 at 700°C in fuel cell mode and a current density of 3.1 A cm −2 at 1.3 V in electrolysis mode, along with stable operation for over 380 h. This work provides insights into concurrently enhancing both activity and stability in electrocatalysts for advanced energy conversion technologies.


  • Top Cited Papers

    Electron‐Driven‐Proton Intercalation in δ‐MnO 2 to Unlock Fast‐Charging Aqueous Zinc‐Ion Batteries

    by Chen Li, Pingge He, Tian Zhang, Tianhao Wang, Xinghe Xu, Zhongheng Fu, Yucun Zhou, Xuanhui Qu, Yongchang Liu

    In aqueous zinc‐ion batteries (AZIBs), the H + intercalation endows the battery with high reversible capacity and outstanding rate performance due to its superior electrochemical kinetics. However, how to boost the proton intercalation remains a challenge. Herein, a bottom‐up concept with electron‐driven‐proton intercalation strategy was proposed through Ca 2+ pre‐intercalation and S 2− doping into δ‐MnO 2 (Ca‐MnO 2 ‐S). The co‐doping effect synergistically increases the electron concentration in δ‐MnO 2 , improving the H + insertion capacity and thus the electrode reaction dynamics. Meanwhile, the inserted H + ion acts as a “lubricant” to further facilitate the Zn 2+ transport. Consequently, the Ca‐MnO 2 ‐S cathode exhibits excellent H + /Zn 2+ storage performance with a high capacity (400.4 mAh g −1 at 0.1 A g −1 ), superior rate capability (136.3 mAh g −1 at 20 A g −1 ) and excellent long‐term cycling stability (88.1% capacity retention after 5000 cycles at 5 A g −1 ) in AZIBs. Moreover, pouch cells further validate its fast‐charging capability and high service durability across a wide temperature range from −10°C to 40°C. This work introduces an electron‐concentration‐modulation strategy to regulate the proton intercalation, providing both mechanistic insight and practical guidance for advanced Zn‐storage cathode design.


  • Modulating Metal‐Oxygen Bonds in BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3‐δ to Enhance Oxygen Adsorption and Proton Conduction for High‐Performance Protonic Ceramic Fuel Cell Air Electrodes

    by Chaofan Yin, Zilin Zhou, Yueyue Sun, Zixuan Xue, Zhengrong Liu, Yanmin Wang, Yuechao Yao, Jiajia Cui, Jun Zhang, Jun Zhou, et al.

    Protonic ceramic fuel cells (PCFCs) offer an efficient and low‐emission power generation technology. The air electrode critically governs the oxygen reduction reaction (ORR) kinetics and overall cell efficiency of PCFCs. BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3‐δ (BCFZY) perovskite, a triple‐conducting (H + /O 2− /e − ) air electrode material, enables superior ORR kinetics in PCFCs, yet its performance is limited by insufficient ionic conductivity. Here, we develop BaCo 0.4 Fe 0.4‐x Zn x Zr 0.1 Y 0.1 O 3‐δ (BCFZYZnx, x = 0, 0.1, 0.2) air electrodes via controlled Zn‐for‐Fe substitution to tailor metal‐oxygen bonding. Experimental and theoretical analyses reveal that this chemical modification optimizes the electronic structure and enhances surface alkalinity, facilitating hydration and proton conduction. The PCFC incorporating BCFZYZn0.2 air electrode achieves a peak power density of 0.510 W cm −2 at 650°C—36% higher than pristine BCFZY—along with stable operation over 100 h. This study offers a simple and effective strategy for designing highly active and durable air electrodes for efficient oxygen reduction.


  • Rational Design of Critical Materials for High-Performance and Durable Reversible Proton-Conducting Solid Oxide Cells

    by Yucun Zhou

    Reversible proton-conducting solid oxide cells (R-PSOCs) are one of the most promising techniques for energy conversion and storage due to their potential for efficient, large-scale, long-term, and low-cost power and fuel co-generation. However, the practical applications of R-PSOCs are still hindered by the lack of highly active and robust materials (e.g., electrolyte and air electrode materials) for dual-mode operation. In this presentation, we will introduce the scientific challenges facing the design of efficient and durable materials for R-PSOCs. We will then present our recent progress in the development of new electrolyte and air electrode materials as well as the reversible cells. High performance and suitable long-term (>1000 h) stability of the materials and reversible cells will be highlighted. Mechanism of the enhanced activity and stability of the materials are revealed by a combination of electrochemical measurement, modeling, simulation, and in situ/operando characterization. In addition, the technic challenges facing the fabrication of large-sized reversible cells will be addressed. The development of large-sized proton-conducting reversible cells (10×10 cm 2 ) as well as the cell performance will be presented.

  • Scalable and facile fabrication of a dense Ce0.9Gd0.1O2-δ buffer layer for solid oxide fuel cells

    by Fuhuan Wang, Weifeng Zhang, Xiaojie Cheng, Yanmin Wang, Yuechao Yao, Jun Zhang, Ting Chen, Yucun Zhou, Shaorong Wang, Hewu Wang, et al.


  • In Situ Construction of a High‐Entropy Perovskite Based Tri‐Phase Composite Electrode toward Efficient Reversible Solid Oxide Cells

    by Yuechao Yao, Jiangyuan Feng, Liangfei Xu, Yan Li, Weifeng Zhang, Fuhuan Wang, Pengfei Yan, Jun Zhang, Qiang Hu, Yucun Zhou, et al.

    Reversible solid oxide cells (R‐SOCs) are promising for energy applications but face limitations due to poor durability and slow oxygen‐reduction/evolution reactions at air electrodes. Here, a high‐entropy perovskite‐based (HEP) tri‐phase composite, (La 0.2 Sr 0.2 Pr 0.2 Ba 0.2 Ce 0.2 ) x CoO 3‐δ , comprising an A‐site deficient La 0.2 Sr 0.2 Pr 0.2 Ba 0.2 Ce 0.2 CoO 3‐δ , doped‐CeO 2 , and Co 3 O 4 phases are presented. The HEP phase provides catalytic sites and robust frameworks, the doped‐CeO 2 phase enhances oxygen‐ion transport; and the Co 3 O 4 nanoparticles offer additional active sites. The optimized (La 0.2 Sr 0.2 Pr 0.2 Ba 0.2 Ce 0.2 ) 0.7 CoO 3‐δ electrode exhibits promising electrochemical performance: a low area‐specific resistance of 0.058 Ω cm 2 at 700 °C and enhance stability (a 2‐fold improvement in ambient air, a 6‐fold enhancement in moisture resistance, and a 3‐fold increase in Cr tolerance compare to (La 0.6 Sr 0.4 ) 0.95 Co 0.2 Fe 0.8 O 3‐???? ). When applied as an air electrode for R‐SOCs, it delivers excellent performance at 800 °C: a peak power density of 1.68 W cm −2 in fuel cell (FC); a current density of 1.5 A cm −2 at 1.2 V in electrolysis cell (EC). Significantly, this work represents the first application of a high‐entropy‐oxide‐based material as an air electrode in large‐area R‐SOCs (10×10 cm 2 ). The assembled R‐SOC achieves an output of 61 W in FC and 66 A at 1.18 V in EC at 800 °C, highlighting its potential for practical applications.


  • Open Access

    Significantly enhanced stability and activity of a perovskite oxygen electrode for reversible protonic ceramic electrochemical cells by heterointerface engineering

    by Xiaoyu Zhang, Chenxiao Wang, Kui Liu, Yucun Zhou, Zuzhi Huang, Ting Chen, Guangjun Zhang, Ning Sun, Zichen Zhuang, Lang Xu, et al.

    Reversible protonic ceramic electrochemical cells (R-PCECs) are considered as the highly promising contraptions for bidirectional electric energy generation or storage, capable of efficiently converting electrical and chemical energy in mutual directions. However, the sluggish electrocatalytic activity at low temperature and unsatisfactory operational durability of oxygen electrodes remains the primary challenges to the commercial application of R-PCECs. Here, the degradation mechanism of the BaFe0.4Co0.4Zr0.1Y0.1O3-δ (BFCZY) oxygen electrode under humid conditions is systematically investigated. The degradation can be ascribed to the formation of BaCO3 caused by the water-facilitated Ba segregation. The activity and stability of the BFCZY oxygen electrode are significantly improved through heterointerface engineering by infiltrating the BaCoO3 (BCO) catalyst. At 600 °C in 30 vol% H2O-air, the heterointerface engineering decreases the polarization resistance of the BFCZY electrode by half (from 0.42 to 0.21 Ω cm2) and the decay rate by more than one order of magnitude (from 0.384 to 0.026 Ω cm2/100 h). Meanwhile, a R-PCEC with the BCO-BFCZY oxygen electrode exhibits high activity and stability in both the fuel cell and water electrolysis modes. The substantially increased electrocatalytic activity and stability of the oxygen electrode is primarily ascribed to the improved surface oxygen exchange process and inhibited Ba segregation.