VMVinay Kumar Midha

Vinay Kumar Midha

*This is an algorithmically generated author record based on publicly available information.

Vinay Kumar Midha has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Impact of soil type and slope angle on the performance of jute geotextiles in controlling runoff erosion

    by Vinay Kumar Midha, Jai Narain, A. K. Choudhary, Sushma Verma, Lalit Jajpura

  • Impact of varying lactate concentration in sweat on thermo-physiological comfort of multi-layered ensembles

    by Agya Preet, Arunangshu Mukhopadhyay, Vinay Kumar Midha

    Sweating is thermo-regulatory behaviour that occurs when a person performs vigorous activity even in cold climatic condition. One of important component of sweat is the presence of lactate. Based on climatic condition, age, gender, maturity and nature of activity level, the change in lactate concentration is inevitable. Hence, the present study is focussed on the impact of change in the lactate concentration on the moisture transmission behaviour through the clothing. The purpose of this paper is to investigate the impact of changing lactate concentration on the moisture vapour transmission behaviour through multi-layered clothing ensembles. For the investigation, sweat solution representing male and female sweat were taken for present study. Two different multi-layered ensembles consisting of either spacer or fleece as middle layer were considered. The water vapour permeability and drying rate test were done at standard atmospheric conditions. After testing, ANOVA analysis was done in order to determine the most significant parameters. Fabric structure (constituent layers) behaved differently when tested individually and as the layered component with different sweat solutions. Water vapour permeability of sweat solution with higher lactate concentration was lower as compared to sweat solution with lower lactate concentration. Individual layers showed higher rate of vapour permeability with sweat solution containing lower lactate concentration as compared to multi-layered ensembles. Role of PU coated nylon fabric was predominant in case of multi-layered ensembles. Difference in transmission of sweat solution was found higher in case of uni-directional stitched multi-layer spacer ensembles whereas marginal difference was observed in case of bi-directional seamed multi-layer spacer ensemble. Drying rate of sweat containing lower concentration of lactate was higher as compared to the other sweat solution for all the selected fabrics. Density of liquid and amount of the water available for drying influenced the drying behaviour and thus accounted for difference in drying rate of sweat solution differing in the lactate concentration. The contribution percentage of layers, i.e. type of structure was higher (nearly 93–96%) compared to that of solution type (3.3–4.9%) in case of individual layers whereas in the case of the multi-layer ensembles; type of seam had maximum contribution percentage (71–77%) followed by solution type (10–15%). Type of layers had least contribution percentage (nearly 7–9%). The findings from the study are expected to be realistic and important in designing and development of cold weather garment ensemble for different gender type depending on their activity level especially in case of military personnel and those performing combat activities. This experimental work based will provide the insight about the behaviour of actual sweat transmission through the layered fabric ensembles and ways to prevent the accumulation of moisture near to human skin surface by manufacturing suitable design structures (in terms of layering composition and seam patterns) per the morphology and requirement of specific consumers.


  • Studies on thermal comfort of multi-layered fabric assembly after wetting with sweat and distilled water

    by Samridhi Garg, Vinay K Midha, Monica Sikka

    Textiles play a vital role in assuring the thermal stability of the human body. The absorption of perspiration or moisture from a humid environment might result in wet clothing. Protective and sports apparel are often wet when the wearer is involved in high level of activity; thereby affecting the comfort. In order to understand the comfort behaviour of textiles in wet state, most of the researchers used the distilled water or NaCl aqueous solution. However, human sweat is a very complex aqueous mixture of chemicals comprising of salts, lipids, urea, lactic acid, carbohydrates, and minerals. In the present study, the effect of simulated sweat solution on the thermal behaviour of multi-layered fabric assembly is studied and compared with that of distilled water. The multi-layered fabric assembly consists of breathable PU-coated nylon as an outer layer; polyester knitted fabric as an inner layer; and micro-polyester wadding/hollow-polyester wadding/spacer fabric as the middle layer. In addition, the inner layer (next to the skin) is also tested for thermal comfort for both dry and wet states. It is observed that thermal properties of fabrics are drastically affected under wet conditions. The inner layer of fabric wetted with distilled water shows higher thermal conductivity as compared to that wetted with simulated sweat. Among various multi-layered assemblies, the thermal resistance and thermal diffusion of multi-layered assembly having hollow polyester wadding as a middle layer is high as compared to that having spacer fabric in the middle, under both dry and wet conditions.


  • Theoretical model to estimate the storage volume of rolled erosion control products/geomeshes

    by S. Suresh Kumar, Vinay Kumar Midha, Sushma Verma

    Storage effect created by cross laid weft yarns of runoff erosion control geomeshes has a significant influence on their performance. A theoretical model was proposed (prism model) in the recent past to evaluate the storage volume of the geomeshes (micro-barriers), but it has the limitation that is has not considered the warp and weft yarn interlacement. Therefore, a revised pyramid storage model is formulated in this paper by considering the yarn interlacement. To validate the proposed model, plain woven geomeshes are subjected to runoff erosion test at different slope angles (soil slope) in a bench-scale setup. Variation between experimental culmination and calculated culmination due to storage effect is compared by its percentage difference. It is observed that percentage difference between experimental culmination and calculated culmination is lower for proposed pyramid model at all slope angle and mass. It is also observed that at increased slope angle, percentage difference between calculated storage volume and experimental result increases for both pyramid and prism storage model, due to the reduced storage volume. In addition, pyramid storage model has been formulated for different open weave geomeshes by considering the weft yarn interlacement and float length. Theoretically, it is observed that initial increase in float length shows a significant increase in storage volume, but further increase in float length results in a limited increase in storage volume. The results correlate with the past studies on different woven geomeshes. Hence, the proposed storage model with consideration of yarn interlacement and weave can be used for optimising the performance of geomesh at different soil slope angles.

  • Open Access

    Effect of Parameters on the Runoff Erosion Control Performance of Structurally Modified Jute and Coir Geomeshes over Loamy Sand

    by Sushma Verma, Vinay Kumar Midha, Awadesh Kumar Choudhary

    Soil erosion is a serious environmental problem that can be controlled using bioengineering techniques. In using a bioengineering technique, temporary reinforcement is performed with geomeshes until vegetation takes root. In this study, structurally modified jute and coir geomeshes were tested for runoff erosion control and runoff volume over loamy sand at different slope angles. The laboratory results revealed that all parameters (slope angle, type of weave and type of material) had a significant effect on the erosion control performance of geomeshes. The slope angle contributed most (52.34%) to runoff erosion control, followed by weave type (25.79%) and type of material (12.28%). At lower and medium slope angles (of 15o and 30o, respectively) the twill-woven structure of coir geomeshes provided better erosion control than plain- and satin-woven structures, while plain-woven jute geomeshes demonstrated better erosion control at all slope angles. To understand the overall impact, a germination test was also conducted. According to the germination test results, the twill weave of jute geomeshes provided the highest rooting length. In general, plain-woven jute geomeshes are preferred for better erosion control on a high slope angle, while plain and twill can be used on a low slope angle.


  • Open Access

    Effect of Lubrication on the Changes in Tensile Properties of Cotton Sewing Thread at Different Stages of Sewing

    by Vinay Kumar Midha, Sushma Verma

    Journal of Fiber Bioengineering and Informatics (JFBI) is an academic peer-reviewed and fully refereed international journal to promote multidisciplinary research and collaborations across different fields such as nano science, nanotechnology, chemistry, physics, biology, medical science, material science, tribology, textile science and technology, clothing science and technology, mathematics, computer science and informatics, human physiology, anthropology, fashion design and engineering design of fiber products.JFBI aims to create an international forum for exchanging novel ideas to promote the overall impact of research in fiber science, engineering and technology. This quarterly published journal is fully committed to help authors to generate high impact research outputs in terms of academic citations, industrial applications and contributions to the society.