Sourav Das
Research Subjects
Research Interests
Sourav Das has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Suraj Kumar Tripathy
School of Chemical Engineering, Kalinga Institute of Industrial Technology, Bhubaneswar 751024, India
13 shared publications - Ananyo Jyoti Misra
School of Chemical Technology
6 shared publications Bhaskar Das
6 shared publications- Cecilia Stålsby Lundborg
Department of Global Public Health, Karolinska Institutet, Stockholm, Sweden
6 shared publications Amrita Mishra
Kalinga Institute of Industrial Technology (KIIT)
5 shared publicationsAshok J. Tamhankar
Kalinga Institute of Industrial Technology (KIIT)
5 shared publications
Latest Publications
- 5 August 2026
- Published by Taylor & Francis in Environmental Technology
- Vol. 47 (20) , 2969-2984
Free-living amoebae predation in nutrient-enriched treated wastewater: ecological potential and machine learning-assisted analysis
1. Wastewater (WW) reuse is vitally important for agriculture in arid regions and thus can mitigate global freshwater (FW) scarcity and support sustainable agricultural practices. In India, approxi...
- 5 August 2026
- Published by Taylor & Francis in Environmental Technology
- Vol. 47 (20) , 2969-2984
Free-living amoebae predation in nutrient-enriched treated wastewater: ecological potential and machine learning-assisted analysis
1. Wastewater (WW) reuse is vitally important for agriculture in arid regions and thus can mitigate global freshwater (FW) scarcity and support sustainable agricultural practices. In India, approxi...
- Open Access
- 15 August 2023
- Published by Frontiers Media SA in Frontiers in Nanotechnology
- Vol. 5, 1260792
Editorial: New generation nano-biomaterials and their potential application in drug delivery and bio-sensing
Editorial: New generation nano-biomaterials and their potential application in drug delivery and bio-sensing
- 15 August 2023
- Published by Frontiers Media SA in Frontiers in Nanotechnology
- Vol. 5, 1260792
Open AccessEditorial: New generation nano-biomaterials and their potential application in drug delivery and bio-sensing
Editorial: New generation nano-biomaterials and their potential application in drug delivery and bio-sensing
- 13 March 2020
- Published by Springer Nature
- p. 441-476
Designing Novel Photocatalysts for Disinfection of Multidrug-Resistant Waterborne Bacteria
- 13 March 2020
- Published by Springer Nature
- p. 441-476
Designing Novel Photocatalysts for Disinfection of Multidrug-Resistant Waterborne Bacteria
- 1 December 2018
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 220, 409-416
Sonochemically synthesized Ag/CaCO3 nanocomposites: A highly efficient reusable catalyst for reduction of 4-nitrophenol
- 1 December 2018
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 220, 409-416
Sonochemically synthesized Ag/CaCO3 nanocomposites: A highly efficient reusable catalyst for reduction of 4-nitrophenol
- 2 November 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (41) , 11541-11551
A Simple Colorimetric Method for Naked‐Eye Detection of Circulating Cell‐Free DNA Using Unlabelled Gold Nanoparticles
Gaining interests and expediency of precision medicine for various diseases has led to the search for non invasive techniques like liquid biopsies involving study of circulating cell free DNA (cfDNA) for diagnostic as well as prognostic applications. Present study reports that cfDNA in plasma of patients with Rheumatoid Arthritis are fragmented, modified and hence remain undetected using qPCR, the commonly used analytical assay. They are immunogenic to peripheral blood cells and stimulate them to secrete TNF‐α, a pro‐inflammatory cytokine making it imperative to detect cfDNA in patients for an effective therapeutic intervention. Hereby a non‐invasive colorimetric assay for naked eye discernment of cfDNA using gold nanoparticles is proposed which is potent in detecting long and short cfDNA fragments from small amount of blood, is inexpensive, label free, easy to perform and allows visual detection. This can be further explored to assess its diagnostic and prognostics implications in various human disorders.
- 2 November 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (41) , 11541-11551
A Simple Colorimetric Method for Naked‐Eye Detection of Circulating Cell‐Free DNA Using Unlabelled Gold Nanoparticles
Gaining interests and expediency of precision medicine for various diseases has led to the search for non invasive techniques like liquid biopsies involving study of circulating cell free DNA (cfDNA) for diagnostic as well as prognostic applications. Present study reports that cfDNA in plasma of patients with Rheumatoid Arthritis are fragmented, modified and hence remain undetected using qPCR, the commonly used analytical assay. They are immunogenic to peripheral blood cells and stimulate them to secrete TNF‐α, a pro‐inflammatory cytokine making it imperative to detect cfDNA in patients for an effective therapeutic intervention. Hereby a non‐invasive colorimetric assay for naked eye discernment of cfDNA using gold nanoparticles is proposed which is potent in detecting long and short cfDNA fragments from small amount of blood, is inexpensive, label free, easy to perform and allows visual detection. This can be further explored to assess its diagnostic and prognostics implications in various human disorders.
- Open Access
- 1 November 2018
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 15 (11) , 2440
Sunlight Assisted Photocatalytic Degradation of Ciprofloxacin in Water Using Fe Doped ZnO Nanoparticles for Potential Public Health Applications
Antibiotic residues in the aquatic environment have the potential to induce resistance in environmental bacteria, which ultimately might get transferred to pathogens making treatment of diseases difficult and poses a serious threat to public health. If antibiotic residues in the environment could be eliminated or reduced, it could contribute to minimizing antibiotic resistance. Towards this objective, water containing ciprofloxacin was treated by sunlight-assisted photocatalysis using Fe- doped ZnO nanoparticles for assessing the degradation potential of this system. Parameters like pH, temperature, catalytic dosage were assessed for the optimum performance of the system. To evaluate degradation of ciprofloxacin, both spectrophotometric as well as microbiological (loss of antibiotic activity) methods were employed. 100 mg/L Fe-doped ZnO nanoparticle catalyst and sunlight intensity of 120,000–135,000 lux system gave optimum performance at pH 9 at 30 °C and 40 °C. Under these conditions spectrophotometric analysis showed complete degradation of ciprofloxacin (10 mg/L) at 210 min. Microbiological studies showed loss of antibacterial activity of the photocatalytically treated ciprofloxacin-containing water against Staphylococcus aureus (108 CFU) in 60 min and for Escherichia coli (108 CFU) in 75 min. The developed system, thus possess a potential for treatment of antibiotic contaminated waters for eliminating/reducing antibiotic residues from environment.
- 1 November 2018
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 15 (11) , 2440
Open AccessSunlight Assisted Photocatalytic Degradation of Ciprofloxacin in Water Using Fe Doped ZnO Nanoparticles for Potential Public Health Applications
Antibiotic residues in the aquatic environment have the potential to induce resistance in environmental bacteria, which ultimately might get transferred to pathogens making treatment of diseases difficult and poses a serious threat to public health. If antibiotic residues in the environment could be eliminated or reduced, it could contribute to minimizing antibiotic resistance. Towards this objective, water containing ciprofloxacin was treated by sunlight-assisted photocatalysis using Fe- doped ZnO nanoparticles for assessing the degradation potential of this system. Parameters like pH, temperature, catalytic dosage were assessed for the optimum performance of the system. To evaluate degradation of ciprofloxacin, both spectrophotometric as well as microbiological (loss of antibiotic activity) methods were employed. 100 mg/L Fe-doped ZnO nanoparticle catalyst and sunlight intensity of 120,000–135,000 lux system gave optimum performance at pH 9 at 30 °C and 40 °C. Under these conditions spectrophotometric analysis showed complete degradation of ciprofloxacin (10 mg/L) at 210 min. Microbiological studies showed loss of antibacterial activity of the photocatalytically treated ciprofloxacin-containing water against Staphylococcus aureus (108 CFU) in 60 min and for Escherichia coli (108 CFU) in 75 min. The developed system, thus possess a potential for treatment of antibiotic contaminated waters for eliminating/reducing antibiotic residues from environment.
- 1 March 2018
- Published by Elsevier in Chemical Engineering Journal
- Vol. 336, 476-488
Mechanistic insight into the disinfection of Salmonella sp. by sun-light assisted sonophotocatalysis using doped ZnO nanoparticles
- 1 March 2018
- Published by Elsevier in Chemical Engineering Journal
- Vol. 336, 476-488
Mechanistic insight into the disinfection of Salmonella sp. by sun-light assisted sonophotocatalysis using doped ZnO nanoparticles
- 8 February 2018
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 205 (4) , 432-444
Removal of Congo Red dye from aqueous solution using Amberlite IRA-400 in batch and fixed bed reactors
Removal of Congo Red (CR) azo dye by adsorption process using Amberlite IRA-400 resin was evaluated in both batch and fixed bed system. From the batch adsorption results, maximum loading efficiency (99.99%) of CR dye was obtained at the conditions pH 4.5, temp. 303 K, contact time 180 min., Amberlite IRA-400 dose 0.5 g. The isotherm study ascertained on favorability of adsorption process as the value of separation factor (KL = 0.88) and Freundlich constant (1/n = 0.96 < 1.0) obtained from Langmuir and Freundlich equations are rational, though, overall adsorption process showed best fit with Langmuir (R2 = 0.99) than Freundlich model (R2 = 0.97). The kinetic data studied at three different CR dye concentration (50, 75, 100 mg) and results were fitted with both pseudo-first-order and second-order model equations. The values of R2 obtained are of 0.95 and 0.99 for former and later one, respectively, ensuring on best fitting of pseudo-second-order kinetics and also suggesting about the chemisorptions type of adsorption. The bed depth service model was applied for competitive analysis of the CR dye adsorption in column variables indicating mass transfer from aqueous solution to Amberlite IRA-400 phase. Fourier transform infrared analysis of CR-loaded resin Amberlite IRA-400 showed a band shifted from 1057 to 1130 cm−1 confirming CR adsorption with Amberlite IRA-400. Scanning electron microscope analysis of resin before and after adsorption was well evident from the phase patterns. Selective separation of CR dye from waste effluent of a textile industry bearing CR dye along with other trace heavy metal was achieved.
- 8 February 2018
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 205 (4) , 432-444
Removal of Congo Red dye from aqueous solution using Amberlite IRA-400 in batch and fixed bed reactors
Removal of Congo Red (CR) azo dye by adsorption process using Amberlite IRA-400 resin was evaluated in both batch and fixed bed system. From the batch adsorption results, maximum loading efficiency (99.99%) of CR dye was obtained at the conditions pH 4.5, temp. 303 K, contact time 180 min., Amberlite IRA-400 dose 0.5 g. The isotherm study ascertained on favorability of adsorption process as the value of separation factor (KL = 0.88) and Freundlich constant (1/n = 0.96 < 1.0) obtained from Langmuir and Freundlich equations are rational, though, overall adsorption process showed best fit with Langmuir (R2 = 0.99) than Freundlich model (R2 = 0.97). The kinetic data studied at three different CR dye concentration (50, 75, 100 mg) and results were fitted with both pseudo-first-order and second-order model equations. The values of R2 obtained are of 0.95 and 0.99 for former and later one, respectively, ensuring on best fitting of pseudo-second-order kinetics and also suggesting about the chemisorptions type of adsorption. The bed depth service model was applied for competitive analysis of the CR dye adsorption in column variables indicating mass transfer from aqueous solution to Amberlite IRA-400 phase. Fourier transform infrared analysis of CR-loaded resin Amberlite IRA-400 showed a band shifted from 1057 to 1130 cm−1 confirming CR adsorption with Amberlite IRA-400. Scanning electron microscope analysis of resin before and after adsorption was well evident from the phase patterns. Selective separation of CR dye from waste effluent of a textile industry bearing CR dye along with other trace heavy metal was achieved.