Li-An Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Li-An Ma has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
Qianting Wang
10 shared publicationsXiaoyun Ye
8 shared publications- Xiaoyun Ye
School of Materials Science and Engineering, Fujian University of Technology
8 shared publications Song Chen
6 shared publicationsZhaohui Wei
6 shared publicationsDapeng Luo
4 shared publications
Latest Publications
- 29 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (41) , 19907-19916
Laser-induced in situ fabrication of LIG/TiO 2 heterojunction and enhanced field emission properties
Femtosecond laser irradiation of Ti-coated cork forms TiO 2 -decorated LIG heterojunctions. LIG/TiO 2 -30 shows a low threshold field (1.22 V µm −1 ), enhancement factor (~8614), current density (14.11 mA cm −2 ), and stable emission (>3000 s).
- 29 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (41) , 19907-19916
Laser-induced in situ fabrication of LIG/TiO 2 heterojunction and enhanced field emission properties
Femtosecond laser irradiation of Ti-coated cork forms TiO 2 -decorated LIG heterojunctions. LIG/TiO 2 -30 shows a low threshold field (1.22 V µm −1 ), enhancement factor (~8614), current density (14.11 mA cm −2 ), and stable emission (>3000 s).
- 5 June 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (22) , 225512
Interfacial engineering in hollow MnO@NC@MoS 2 microspheres towards synergistic enhancement of microwave absorption
With the rapid development of modern electronic devices and communication technologies, electromagnetic interference has become increasingly prominent. Herein, a hierarchical hollow microsphere (h-MnO@NC@MoS 2 ) was successfully constructed through a sequential templating method combined with an interfacial engineering strategy. The microsphere is composed of a manganese oxide (MnO) core, a conductive N-doped carbon (NC) interlayer, and a porous molybdenum disulfide (MoS 2 ) outer shell, aiming to achieve high-performance microwave absorption. In this design, the NC interlayer provides a continuous conductive pathway for conduction loss, while the porous MoS 2 shell contributes abundant heterointerfaces for polarization relaxation. This deliberate design enables an outstanding minimum reflection loss of −70.33 dB at a thickness of 1.48 mm and an effective absorption bandwidth value of 5.2 GHz at a thickness of 1.78 mm. The superior performance originates from the synergistic enhancement of impedance matching and multiple attenuation mechanisms, including conduction loss, interfacial polarization, and multiple scattering. This work further confirms the effectiveness of multi-interface design in developing advanced microwave absorbers and provides a valuable reference for the design and preparation of high-performance microwave absorbing materials.
- 5 June 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (22) , 225512
Interfacial engineering in hollow MnO@NC@MoS 2 microspheres towards synergistic enhancement of microwave absorption
With the rapid development of modern electronic devices and communication technologies, electromagnetic interference has become increasingly prominent. Herein, a hierarchical hollow microsphere (h-MnO@NC@MoS 2 ) was successfully constructed through a sequential templating method combined with an interfacial engineering strategy. The microsphere is composed of a manganese oxide (MnO) core, a conductive N-doped carbon (NC) interlayer, and a porous molybdenum disulfide (MoS 2 ) outer shell, aiming to achieve high-performance microwave absorption. In this design, the NC interlayer provides a continuous conductive pathway for conduction loss, while the porous MoS 2 shell contributes abundant heterointerfaces for polarization relaxation. This deliberate design enables an outstanding minimum reflection loss of −70.33 dB at a thickness of 1.48 mm and an effective absorption bandwidth value of 5.2 GHz at a thickness of 1.78 mm. The superior performance originates from the synergistic enhancement of impedance matching and multiple attenuation mechanisms, including conduction loss, interfacial polarization, and multiple scattering. This work further confirms the effectiveness of multi-interface design in developing advanced microwave absorbers and provides a valuable reference for the design and preparation of high-performance microwave absorbing materials.
- 6 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (22) , 10321-10332
Self-Powered Gesture Biometric Authentication via Triboelectric Dynamic Signature and Lightweight Deep Learning
- 6 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 7 (22) , 10321-10332
Self-Powered Gesture Biometric Authentication via Triboelectric Dynamic Signature and Lightweight Deep Learning
- 6 May 2025
- Published by Elsevier in Materials Letters
- Vol. 395
Melamine-mixed MXene/CoFe-MOF derived CNTs modified-hierarchical composites for enhanced microwave absorption
- 6 May 2025
- Published by Elsevier in Materials Letters
- Vol. 395
Melamine-mixed MXene/CoFe-MOF derived CNTs modified-hierarchical composites for enhanced microwave absorption
- 1 January 2025
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 74 (13) , 136102
Preparation and field emission properties of LIG/CuO composites from laser irradiated copper-containing cork
三维(3D)石墨烯材料具有优异的电子发射性能与机械稳定性,在高电流密度场发射器件领域展现出显著优势。本文通过飞秒激光一步法原位制备氧化铜修饰三维石墨烯复合材料(LIG/CuO),实现了软木碳化与铜氧化的同步调控。利用铜盐浸润与抗坏血酸还原构建浅层富铜前驱体,经激光辐照同步诱导纤维素碳化为少层石墨烯和Cu向CuO转变,形成CuO纳米颗粒(30-80 nm)包覆的微晶石墨烯三维纤维网络。该结构展现出卓越场发射性能:制备的纯LIG阈值电场值为~2.12 V/μm,场增强因子~8223;优化的CuO负载量后,LIG/CuO-5阈值电场值缩减至1.57 V/μm,场增强因子达~8823,并在2.89 V/μm下实现了22.71 mA/cm2超高电流密度的电子发射。密度泛函理论(DFT)计算揭示异质结界面电子从CuO向石墨烯转移,使石墨烯功函数从4.833 eV降至4.677 eV,同时CuO表面能带弯曲协同降低隧穿势垒。此外,CuO纳米颗粒的局域电场增强效应与优化分布密度协同使有效发射点密度提升。
- 1 January 2025
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 74 (13) , 136102
Preparation and field emission properties of LIG/CuO composites from laser irradiated copper-containing cork
三维(3D)石墨烯材料具有优异的电子发射性能与机械稳定性,在高电流密度场发射器件领域展现出显著优势。本文通过飞秒激光一步法原位制备氧化铜修饰三维石墨烯复合材料(LIG/CuO),实现了软木碳化与铜氧化的同步调控。利用铜盐浸润与抗坏血酸还原构建浅层富铜前驱体,经激光辐照同步诱导纤维素碳化为少层石墨烯和Cu向CuO转变,形成CuO纳米颗粒(30-80 nm)包覆的微晶石墨烯三维纤维网络。该结构展现出卓越场发射性能:制备的纯LIG阈值电场值为~2.12 V/μm,场增强因子~8223;优化的CuO负载量后,LIG/CuO-5阈值电场值缩减至1.57 V/μm,场增强因子达~8823,并在2.89 V/μm下实现了22.71 mA/cm2超高电流密度的电子发射。密度泛函理论(DFT)计算揭示异质结界面电子从CuO向石墨烯转移,使石墨烯功函数从4.833 eV降至4.677 eV,同时CuO表面能带弯曲协同降低隧穿势垒。此外,CuO纳米颗粒的局域电场增强效应与优化分布密度协同使有效发射点密度提升。
- 14 April 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (13) , 24205-24216
Field emission properties of LIG/ZnO heterojunction prepared by ultrafast laser direct writing
- 14 April 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (13) , 24205-24216
Field emission properties of LIG/ZnO heterojunction prepared by ultrafast laser direct writing
- 27 October 2023
- Published by Elsevier in Journal of Energy Storage
- Vol. 74
In-situ fabricated porous Ni-Co-Mo based nanosheet array electrodes for hybrid supercapacitors with long-cycle stability
- 27 October 2023
- Published by Elsevier in Journal of Energy Storage
- Vol. 74
In-situ fabricated porous Ni-Co-Mo based nanosheet array electrodes for hybrid supercapacitors with long-cycle stability