DPDevadas Bhat Panemangalore

Devadas Bhat Panemangalore

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Devadas Bhat Panemangalore has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Development of magnesium-based alloys for biomedical applications

    by Devadas Bhat Panemangalore

    Développement d'alliages à base de magnésium pour applications biomédicales: Étant donné leur capacité à se dégrader à l'intérieur du corps, les implants biodégradables ont fait l'objet de nombreuses recherches médicales. Parmi tous les matériaux, c'est le magnésium, un élément indispensable du corps humain, qui conduit aux résultats les plus favorables car son module d'Young est similaire à celui de l'os. De ce fait, les méthodes adoptées afin d'améliorer le comportement du magnésium pur vis-à-vis de la corrosion sont les suivantes: a)Ajout d'éléments d'alliage comme le zinc, le calcium et l'erbium (Mg-2Zn-2Er, Mg-2Zn-0.6Ca-1Er, etc.) pour contrôler le comportement de dégradation b) Procédés secondaires tels que l'extrusion pour modifier sa microstructure c)Revêtements de surface à base de fluorure pour mieux protéger la surface. La première partie de cette thèse porte sur la caractérisation microstructurale d'alliages. La caractérisation microstructurale révèle la présence de MgZn2, de phases W (Mg3Zn3Er2) et i (Mg3Zn6Er) dans différents alliages. L'évaluation des propriétés mécaniques a révélé une augmentation des propriétés de traction et de compression des alliages ternaires et quaternaires par rapport aux alliages de Mg et de Mg-2Zn. Ces propriétés mécaniques améliorées sont attribuées à une réduction de la taille des grains, à la présence d'atomes de soluté et à des phases secondaires. Mg-2Zn-2Er et Mg-3Zn-0.5Er présentaient une résistance à la corrosion améliorée en raison de la microstructure à granulométrie fine et d'une répartition uniforme des phases secondaires. La viabilité cellulaire a été améliorée avec l'épaisseur du temps de revêtement et ces alliages pourraient servir de candidats potentiels pour d'autres tests in vivo.

  • Open Access

    Optimized Heat Transfer Rate in Cu/CNT Nano Composite Prepared by Electrodeposition Technique

    by K. Divya Bharathi, M. R. Rahman, Ajay Kumar Yadav, B. V. Rudra Murthy, P. Devadas Bhat

    The Cu/CNT nanocomposites are prepared by reinforcing Carbon Nanotubes (CNT) in a copper matrix through the electrodeposition technique. These nanocomposites are prepared by varying the diameter and concentrations of the CNT and are characterized by heat transfer rate. This study describes the overall heat transfer phenomena of Cu/CNT nanocomposite due to the preferential deposition of CNTs in the Cu matrix. The heat transfer rate is optimized and increased by 41.08% and 46.91% in natural and forced convection respectively compared to pure Cu coating. The reason is attributed to the better alignment, the optimum concentration of CNT in the composite, and the homogenously placed CNTs network in the composite.


  • Flexible Electromagnetic Shielding Material Using Multi-Walled Carbon Nanotube Coated Cotton Fabric

    by D. S. Arun Kumar, T. R. Puneeth Kumar, K. Krishnamoorthy, P. Devadas Bhat, M. R. Rahman

    The present work focus on the development of Cotton fabric with Multi-walled carbon nanotube Coating (CMC) through a dip and dry process. The influence of multi-walled carbon nanotubes (MWCNTs) concentration on transmission, reflection, and absorption properties, which leads to an estimation of electromagnetic interference (EMI) shielding was also studied. The merits of MWCNTs coating on the cotton fabric were evaluated using field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and surface resistivity. The Fourier transform infrared (FTIR) spectroscopy result supports the bonding between MWCNTs and cotton fabric. The significant increase of 98.9% of EMI shielding for the highest MWCNTs weight percentage (22.23 wt%) was attributed due to the well-interconnected network of MWCNTs. The shielding mechanism in the high wt% MWCNTs samples is dominated by both reflection and absorption properties.


  • Open Access

    Surface Modification of 6xxx Series Aluminum Alloys

    by Kuruveri Udaya Bhat, Devadas Bhat Panemangalore, Spandana Bhat Kuruveri, Merbin John, Pradeep L. Menezes

    Due to their superior mechanical properties, formability, corrosion resistance, and lightweight nature, 6xxx series aluminum (Al) alloys are considered as a promising structural material. Nevertheless, the successful application of these materials depends on their response to the external environment. Recently, designers considered the surface properties an equally important aspect of the component design. Due to this concern, these alloys are subjected to varieties of surface modification methodologies. Many methodologies are explored to modify the 6xxx series Al alloys surfaces effectively. These methods are anodizing, plasma electrolytic oxidation (PEO), cladding, friction stir processing, friction surfacing, melting, alloying, and resolidification using high energy beams, etc. This review work discusses some of these methods, recent research activities on them, important process variables, and their role on the final properties of the surfaces.


  • Women in Electrochemistry- Contributions, Challenges and Potential Solutions

    by Ananya Das, Pratham Nagaraj, Devadas Bhat Panemangalore

    The perspectives gained over the years by women working in electrochemistry are described in order to throw light on their history and current status and achievements in this field, the potential that the future holds, and the role that well-established female electrochemists and the electrochemical societies can play in improving upon the under-representation and under-recognition of women in electrochemistry. Here, a hopeful and optimistic future is presented, in which men and women, both equally contribute to this field, which encompasses our entire life, from corrosion and life of materials to transportation industry.

  • Carbon and Metallic-based Nanomaterials for Strain Sensors - A Review

    by Pravan Omprakash, Udaya B. Kuruveri, Devadas Bhat Panemangalore

    Strain gauges are devices whose electrical resistances vary proportionately with the amount of strain applied on the device. They can be used for real-time applications in the aerospace sector, as a geotechnical tool in tunnels and bridges, in rail monitoring and health monitoring sectors. Nanomaterials have been widely used for this application because they can be flexible, stretchable and have high strength. Several researchers have used numerous carbon-based and metallic nanostructures to develop functionally graded materials. Among carbon-based materials, graphene has been widely researched as a viable material for strain sensors due to its superior mechanical and electrical properties. Also, many metallic nanoparticles have been investigated to design strain sensors that are highly sensitive to a wide range of strains. In this article, a review of carbon and metallic nanomaterial-based strain sensors is presented, with emphasis on applications pertaining to structural health monitoring and wearable devices.


  • Open Access

    Microstructure and Corrosion Behavior of Extruded Mg-Sn-Y Alloys

    by Devadas Bhat Panemangalore, Rajashekhara Shabadi, Manoj Gupta, Ludovic Lesven

    Magnesium and its alloys, with their unique properties such as high strength/density ratio, good castability, and machinability, have found several applications in the aerospace and automotive industries. One of the reasons that restrict their widespread applicability is their poor corrosion resistance since Mg is readily oxidized in the presence of oxygen and humidity. The oxide layer is pseudo-passive and non-protective. The present effort tried to improve the passivity of this layer with the addition of alloying elements such as Tin (Sn) and Yttrium (Y) to create phases that interact differently with the oxidizing environment, thereby improving the corrosion resistance. In this work, the corrosion behavior of pure magnesium and Mg-5Sn-xY (x = 0.5, 1, 2 wt.%) were evaluated using immersion and potentiodynamic polarization tests. XRD, SEM-EDS, and EBSD have investigated the microstructure and elemental composition of the alloys. The present study is focused on elucidating the microstructure-corrosion relationship in Mg-Sn-Y alloys.


  • Open Access

    Coating Technologies for Copper Based Antimicrobial Active Surfaces: A Perspective Review

    by Naveen Bharadishettar, Udaya Bhat K, Devadas Bhat Panemangalore

    Microbial contamination of medical devices and treatment rooms leads to several detrimental hospital and device-associated infections. Antimicrobial copper coatings are a new approach to control healthcare-associated infections (HAI’s). This review paper focuses on the efficient methods for depositing highly adherent copper-based antimicrobial coatings onto a variety of metal surfaces. Antimicrobial properties of the copper coatings produced by various deposition methods including thermal spray technique, electrodeposition, electroless plating, chemical vapor deposition (CVD), physical vapor deposition (PVD), and sputtering techniques are compared. The coating produced using different processes did not produce similar properties. Also, process parameters often could be varied for any given coating process to impart a change in structure, topography, wettability, hardness, surface roughness, and adhesion strength. In turn, all of them affect antimicrobial activity. Fundamental concepts of the coating process are described in detail by highlighting the influence of process parameters to increase antimicrobial activity. The strategies for developing antimicrobial surfaces could help in understanding the mechanism of killing the microbes.


  • Review—Energy Storage through Graphite Intercalation Compounds

    by Varun Gopalakrishnan, Anushpamathi Sundararajan, Pravan Omprakash, Devadas Bhat Panemangalore

    Research and development with regards to battery technologies have been evolving at a profitably good rate with an impressive amount of progress being made at different levels. Graphite has been continuously preferred as the anode material for lithium-ion batteries since its commercialization in 1991. The interlayer spacing of about 3.35 Å promotes the intercalation of guest ions, thereby resulting in what is called graphite intercalation compounds (GICs). Through such intercalation mechanisms, graphite can contribute to electrochemical charge transfer owing to its ionic and electronic conduction properties. The intercalation of alkali metal ions into graphite is considered the epitome of ion intercalation with regards to layered materials. Putting together various inferences made through the years, this review aims at establishing a foundational understanding of GICs and their applications in energy storage devices. A brief overview of graphite intercalation chemistry has been provided and discussions on the advancements in various GICs ranging from binary-GICs to ternary-GICs have been elaborated. Towards the end, this paper provides a comprehension of the specific strategies that might improve the performance of a GIC, following which the challenges and the future of GIC-based research have also been highlighted.


  • Open Access

    Corrosion Behavior, Microstructure and Mechanical Properties of Novel Mg-Zn-Ca-Er Alloy for Bio-Medical Applications

    by Devadas Bhat Panemangalore, Rajashekhara Shabadi, Manoj Gupta

    In this study, the effect of calcium (Ca) and erbium (Er) on the microstructure, mechanical properties, and corrosion behavior of magnesium-zinc alloys is reported. The alloys were prepared using disintegrated melt deposition (DMD) technique using the alloying additions as Zn, Ca, and Mg-Er master alloys and followed by hot extrusion. Results show that alloying addition of Er has significantly reduced the grain sizes of Mg-Zn alloys and also when compared to pure magnesium base material. It also has substantially enhanced both the tensile and the compressive properties by favoring the formation of MgZn2 type secondary phases that are uniformly distributed during hot-extrusion. The quaternary Mg-Zn-Ca-Er alloy exhibited the highest strength due to lower grain size and particle strengthening due to the influence of the rare earth addition Er. The observed elongation was a result of extensive twinning observed in the alloys. Also, the degradation rates have been substantially reduced as a result of alloying additions and it is attributed to the barrier effect caused by the secondary phases.