HPHelcio Duarte Pereira

Helcio Duarte Pereira

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Helcio Duarte Pereira has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparison of Machine Learning Methods for Marker Identification in GWAS

    by Weverton Gomes da Costa, Hélcio Duarte Pereira, Gabi Nunes Silva, Aluizio Borém, Eveline Teixeira Caixeta, Antonio Carlos Baião de Oliveira, Cosme Damião Cruz, Moyses Nascimento

    Genome-wide association studies (GWAS) are essential for identifying genomic regions associated with agronomic traits, but Linear Mixed Model (LMM)-based GWAS face challenges in capturing complex gene interactions. This study explores the potential of machine learning (ML) methodologies to enhance marker identification and association modeling in plant breeding. Unlike LMM-based GWAS, ML approaches do not require prior assumptions about marker–phenotype relationships, enabling the detection of epistatic effects and non-linear interactions. The research sought to assess and contrast approaches utilizing ML (Decision Tree—DT; Bagging—BA; Random Forest—RF; Boosting—BO; and Multivariate Adaptive Regression Splines—MARS) and LMM-based GWAS. A simulated F2 population comprising 1000 individuals was analyzed using 4010 SNP markers and ten traits modeled with epistatic interactions. The simulation included quantitative trait loci (QTL) counts varying between 8 and 240, with heritability levels set at 0.5 and 0.8. These characteristics simulate traits of candidate crops that represent a diverse range of agronomic species, including major cereal crops (e.g., maize and wheat) as well as leguminous crops (e.g., soybean), such as yield, with moderate heritability and a high number of QTLs, and plant height, with high heritability and an average number of QTLs, among others. To validate the simulation findings, the methodologies were further applied to a real Coffea arabica population (n = 195) to identify genomic regions associated with yield, a complex polygenic trait. Results demonstrated a fundamental trade-off between sensitivity and precision. Specifically, for the most complex trait evaluated (240 QTLs under epistatic control), Ensemble methods (Bagging and Random Forest) maintained a Detection Power (DP) exceeding 90%, significantly outperforming state-of-the-art GWAS methods (FarmCPU), which dropped to approximately 30%, and traditional Linear Mixed Models, which failed to detect signals (0%). However, this sensitivity resulted in lower precision for ensembles. In contrast, MARS (Degree 1) and BLINK achieved exceptional Specificity (>99%) and Precision (>90%), effectively minimizing false positives. The real data analysis corroborated these trends: while standard GWAS models failed to detect significant associations, the ML framework successfully prioritized consensus genomic regions harboring functional candidates, such as SWEET sugar transporters and NAC transcription factors. In conclusion, ML Ensembles are recommended for broad exploratory screening to recover missing heritability, while MARS and BLINK are the most effective methods for precise candidate gene validation.


  • Open Access

    Genotype environment interaction in wheat including weather covariates using singular value decomposition

    by Carla Galvão Fernandes, Moysés Nascimento, Ana Carolina Campana Nascimento, Camila Ferreira Azevedo, Ivan Ricardo Carvalho, Hélcio Duarte Pereira, Kassiana Kehl

    Wheat is a crop of significant global and Brazilian economic importance. The success of cultivation depends on several factors. Studying genotype by environment (G x E) interaction is fundamental for developing more productive and resilient varieties. Due to the climatic diversity, it is important to understand how weather covariates (WC) interact with the environments under study. To understand the complex relationships between WC and environments, it is possible to perform a graphical analysis based on the singular value decomposition (SVD) of the matrix composed by the values of the WC evaluated in the environments under study. This study proposed graphical analysis to understand the interaction between WC and evaluated environments. We used data from a randomized block design (four replications) assessed 42 wheat genotypes across 10 environments (2 years and 5 Rio Grande do Sul locations). Temperature (°C), relative humidity (%), and precipitation (mm) data were obtained from the NASA POWER project, using the experiment’s years and coordinates. The visualization of the interaction between weather covariates and environments revealed the WC that most influenced the performance of the genotypes. The environment E6 and E8 stood out for their high productivity, mainly associated with precipitation and relative humidity. This tool allows breeders to visualize the interconnection between different cultivation scenarios, obtaining valuable information for more accurate and effective decisions.


  • Open Access

    Genetic Merit of Parents and Heterosis in Cassava (Manihot esculenta Crantz)

    by Vanderlei da Silva Santos, Helcio Duarte Pereira, Juraci Souza Sampaio Filho, Luciano Rogério Braatz de Andrade

    Cassava breeders are led to discard plants before evaluating families, failing to obtain important information, such as the genetic merit of the parents. In this work, we evaluated a Clonal Evaluation Trial (CET) with 1886 clones from 57 crosses in an augmented block design with the 15 parents used as check treatments. We applied a mixed-model framework incorporating pedigree information. Three traits (fresh root yield (FRY), dry matter content (DMC) and dry matter yield (DMY)) were evaluated, and genetic gains considering several selection intensities were investigated. Disregarding the family structure, the gains for FRY (19.96 to 30.80%) and DMY (16.63 to 27.56%) were much higher than the estimated for DMC (7.79 to 11.46%). The means of clones were very near to the mean of parents for all traits, suggesting the absence of heterosis. However, considering the data by family, heterosis varied from −4.38 to 7.53% for FRY, from −2.74 to 1.89% for DMC and from −4.36 to 6.89% for DMY. Heterosis for FRY is not negligible, although it is small. The analysis by family enables us to infer the genetic control of the traits under study. This is not possible when the family structure is disregarded.

  • Open Access

    Temporal field phenomics of transgenic maize events subjected to drought stress: Cross‐validation scenarios and machine learning models

    by Helcio Duarte Pereira, Juliana Vieira Almeida Nonato, Rafaela Caroline Rangni Moltocaro Duarte, Isabel Rodrigues Gerhardt, Ricardo Augusto Dante, Paulo Arruda, Juliana Erika de Carvalho Teixeira Yassitepe

    Global climate change has driven breeding programs to develop abiotic stress‐resilient plant varieties. Traditionally, assessing drought resilience involves labor‐intensive and time‐consuming processes. This study used an unmanned aerial system (UAS) to predict key phenotyping traits in maize ( Zea mays L.) and monitor plant response to drought during the crop cycle. We grew transgenic maize hybrids in two trials, one irrigated and another subjected to drought stress, and used a drone equipped with red–green–blue (RGB) and multispectral sensors to capture images of the plots over time. Machine learning models and various prediction scenarios revealed significant correlations between vegetation indices over time. Interestingly, the RGB sensor outperformed the multispectral sensor in trait prediction. Prediction accuracy across scenarios with untested genotypes and environments ranged from 0.40 to 0.70 for grain yield, 0.43 to 0.69 for days to anthesis, 0.51 to 0.67 for days to silking, and 0.35 to 0.57 for plant height. Ridge and random forest models consistently delivered the most accurate predictions across traits and environments. The vegetation indices normalized green–red difference index, VARI, and RCC also effectively predicted and captured the plant response to drought. This study highlights the value of UAS phenotyping as a practical tool for assessing abiotic stress due to its straightforward implementation.


  • Open Access

    Single-cross performance in off-season in function of urea sources on side-dressing fertilization

    by Gabriel Wiest, Cassiano Spaziani Pereira, Ivan Vilela Andrade Fiorini, Mateus Emanuel Schoffen, Helcio Duarte Pereira, Adriano Alves DA Silva

    Nitrogen is the most required element by the maize crop and suffers the greatest losses due to its inappropriate management, mainly when the urea is used as a source of nitrogen. The objective of this work was to evaluate the efficiency of urea sources, with or without urease inhibitor, in sidedress fertilization of commercial single-cross in off-season in Sinop/MT. The experimental design was completely randomized blocks, in factorial scheme 3 x 5, with 3 replications. The first factor was three side-dress fertilization: witness (without fertilizer); fertilization with 250 kg ha(-1) of urea and fertilization with 250 kg ha(-1) of urea in the presence of urease inhibitor (UREMAX (R)) NBPT. The second factor was five single-crosses: 2B433, DKB255, DKB335, NS45, and SYN522. Vegetative development and yield characteristics were evaluated. The Nitrogen sources did not affect the plant height, stem diameter, and foliar area index, only the chlorophyll content in the leaves. For the yield components, there is an effect of fertilization on the number of grain rows and grain yield. The single-crosses differ among them in vegetative development and yield characteristics. The Nitrogen in side-dress, in the conditions of this study, using the urea with urease inhibitor, increased the fertilization efficiency and raised the grain yield. The single-crosses DKB 255, 2B433, and SYN 522, with the treatment based on UREMAX (R), reached the highest yield.

  • Open Access

    Nodulação e crescimento vegetativo em soja sob diferentes modos de aplicação de inoculante líquido

    by Cassiano Spaziani Pereira, Jean Luiz Scatola, Hélcio Pereira Duarte, Ivan Vilela Andrade Fiorini, Adriano Alves da Silva

    A inoculação é uma das principais práticas culturais em leguminosas como a soja, promovendo economia de recursos em altas doses de nitrogênio mineral. Objetivou-se neste trabalho verificar o efeito de diferentes formas de aplicação de inoculante líquido em soja. O delineamento experimental utilizado foi em blocos casualizados, totalizando 10 tratamentos, com cinco repetições. Os tratamentos foram: aplicação do inoculante líquido sobre as sementes, no solo, aplicação interna às sementes, com o auxílio de uma seringa, além da aplicação foliar nos estádios vegetativos V1, V3, V5 e V8, em adição aos tratamentos com fertilização nitrogenada. Os tratamentos não afetaram o número total de folhas, índice de clorofila e número de nódulos não viáveis. Para altura de planta a inoculação interna à semente, no solo e via foliar em V3 promoveu os melhores resultados. Para área foliar e matéria seca da parte aérea e raiz o uso de nitrogênio mineral prejudicou a cultura, não houve qualquer efeito da inoculação comparado ao tratamento testemunha para essas variáveis. O suprimento de nitrogênio prejudicou o diâmetro de caule e as diferentes formas de inoculação foram superiores à testemunha, exceto a aplicação foliar no estádio V8. Independente da forma, a inoculação causou um aumento no número total de nódulos, sendo superior à testemunha e ao uso de nitrogênio mineral, os quais não diferiram entre si. Apenas a aplicação de nitrogênio mineral comprometeu o número de nódulos viáveis, não havendo diferença da testemunha em relação aos tratamentos com inoculação.


  • Open Access

    Efficiency of foliar sulfur supply to soybean in different developmental stages

    by Ivan Viela Andrade Fiorini, Cassiano Spaziani Pereira, Helcio Duarte Pereira, Luiz Gustavo Balbinot, Gabriel Wiest, Mateus Emanuel Schoffen

    A soja é uma cultura de destaque mundial, cujos grãos têm inúmeros usos na alimentação humana e animal. Dentre os nutrientes essenciais o enxofre é um macronutriente constituinte de proteínas e aminoácidos sendo requerido em quantidade considerável pelas leguminosas. O objetivo do trabalho foi determinar o efeito da utilização de enxofre, via aplicação foliar em diferentes estádios de desenvolvimento da soja, sobre características de desenvolvimento vegetativo e componentes de produtividade. O experimento foi conduzido a campo sob delineamento experimental em blocos casualizados com quatro repetições, em esquema fatorial 3x5 (3 épocas de aplicação via foliar e 5 doses de enxofre). A cultivar de soja TMG 132RR foi utilizada nessa investigação com as doses de 0, 250, 500, 750 ou 1000 mL ha-1 de enxofre aplicadas nos estádios V2, V2+10 ou V2+20 dias. A época de aplicação de enxofre foliar influenciou a produção de matéria seca da parte aérea e a altura de plantas, sendo o estádio V2+20 dias a época mais recomendada. A resposta às diferentes doses de enxofre variou com base nos resultados do teor de clorofila foliar e a altura de plantas. Para a produtividade de grãos houve interação entre época de aplicação de enxofre e dose, sendo a dose de 731 mL ha-1 aplicada em V2 a de máxima produtividade de3690 Kg ha-1. Os componentes de rendimento número de vagens por planta e número de grãos por vagem não foram afetados pelas épocas ou doses de aplicação de enxofre. Para peso de mil grãos as respostas às diferentes doses variaram conforme a época de aplicação.


  • Open Access

    Agronomic performance and severity of common rust in maize under different nitrogen sources

    by Hélcio Duarte Pereira, Renzo Garcia Von Pinho, Ivan Vilela Andrade Fiorini, Ewerton Lélys Resende, Felipe Ribeiro Resende, Luiz Paulo Miranda Pires

    Nitrogen is the most required and complex management element in maize crop, promoting the highest responses in crop yield. The objective of this work was to verify the effect of different N sources on topdressing in minimum tillage and conventional tillage systems on the agronomic performance of the Pioneer 32R22YHR single cross and on the severity of common rust disease. Two experiments were carried out in a randomized block design (DBC) in the 2013/14 crop in minimum tillage and conventional tillage systems. The treatments were: control without nitrogen, ammonium sulfate, urea, ammonium nitrate, a physical mixture of nitrate (70%) and ammonium sulfate (30%) and a chemical mixture of these same sources in the same proportion just explained. Nitrogen sources had no significant effect on plant height, ear insertion height, ear prolificacy, grain yield and leaf severity of common rust, regardless of the sowing system. Under conventional tillage, the plants presented higher plant height, ear insertion and grain yield. There was no effect of sowing systems on prolificacy. With the exception of nitrogen free treatment, for all others, the severity of common rust was higher in minimum tillage system.

  • Open Access

    Evaluation of the residual nitrogen effect liberated by the soybean straw on the maize yield in the second crop

    by Ivan Vilela Andrade Fiorini, Cassiano Spaziani Pereira, Helcio Duarte Pereira, Felipe Ribeiro Resende, Ewerton Lelys Resende, Adriano Alves da Silva

    The objective of this study was to evaluate the effect of Nitrogen (N) liberated by the early soybean straw, inoculated in function of dosage and application means of the inoculant, over the vegetative growth and grain yield of second crop corn, in succession. The hybrid corn Land® was sowed in January 1st, 2017 over the soybean straw from a former experiment in Sinop (MT). The trial design used was randomized blocks (DBC) with four replications and ten treatments. For the soybean treatments: witness without N application (only inoculated with Bradyrhizobium japonicum and B. elkanii); for the other treatments, it has been applied the dosage of 10 kg ha-1 of N in different phenological stages and ways of application (by haul at sowing; in V2 by haul and leaf fertilization; in V4 by haul and leaf fertilization; in R1 by haul and leaf fertilization; in R2 by haul and leaf fertilization). Plant height, stalk diameter, total chlorophyll and grain yield were evaluated. The N mineralization from the soybean straw is not enough to fulfill the corn N demand. Even though there were no significant differences among the treatments, the N application in V2 and R1 stages, by topdressing on former soybean, provided the highest grain yield of corn.


  • Open Access

    Formas e estádios de aplicação de adubação nitrogenada no desenvolvimento e produtividade da soja

    by Cassiano Pereira, Marcos Trentin Filho, Ivan Fiorini, Helcio Pereira, José Rocha, Anderson Lange

    Objetivou-se verificar o efeito da aplicação de Nitrogênio mineral (N) na dose de 10 kg por hectare, via solo ou foliar, em diferentes estádios do desenvolvimento da soja. O experimento foi conduzido em área de cultivo comercial de soja, localizado no município de Sinop-MT, em delineamento de blocos casualizados (DBC) com dez tratamentos e quatro repetições. Os tratamentos estudados foram: testemunha sem N, aplicação na semeadura, em V2 a lanço em cobertura, V2 via foliar, V4 a lanço em cobertura, V4 foliar, R1 a lanço em cobertura, R1 foliar, R2 a lanço em cobertura e em R2 foliar. Foram avaliadas as variáveis teor de clorofila, massa seca de parte aérea, numero de nódulos, massa seca de nódulos, número de vagens, número de grãos por vagem, massa de mil grãos e produtividade. Os tratamentos com aplicação de N diferiram da testemunha para todas as variáveis, exceto para teor de clorofila. Para as variáveis número de vagens por planta, número de grãos por vagem, massa de mil grãos e produtividade de grãos todos os tratamentos com aplicação de N foram superiores à testemunha e as maiores respostas foram obtidas quando o N foi aplicado via foliar nos estádios V2 e R1.