Alberto Gómez-Núñez
Alberto Gómez-Núñez has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Anna Vila
Department of Electronic and Biomedical Engineering, Universitat de Barcelona, Marti i Franqués 1, 08028 Barcelona, Spain
3 shared publications - Concepción López
Departament de Química Inorgànica, Facultat de Química, Universitat de Barcelona, Martí i Franquès 1-11, E-08028 Barcelona, Spain
2 shared publications - Lluc Canals Casals
Department of Projects and Construction Engineering, Universitat Politècnica de Catalunya, Barcelona - 08028, Spain; Insitut d'Investigació Tèxtil i Cooperació Industrial (INTEXTER), Universitat Politècnica de Catalunya, Terrassa - 08222, Spain
2 shared publications - Bhavya Satishbhai Kotak
Technische Hochschule Ingolstadt, CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS), Esplanade 10, D-85049 Ingolstadt, Germany
1 shared publication - Carlos Abomailek
Syensqo, Spain
1 shared publication - Carlos Marchante Fernández
Eurecat-Centre Tecnologic de Catalunya, Unit of Waste, Energy and Environmental Impact, Av. Universtat Autonoma, 23, 08290 Cerdanyola Del Valles, Spain
1 shared publication
Latest Publications
- Open Access
- 18 June 2026
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 17 (6) , 315
Architectural Pathways and Integration Constraints for Feasible Onboard Electrochemical Impedance Spectroscopy for Battery Electric Vehicles
Reliable battery health assessment is essential to accelerate battery electric vehicle (BEV) adoption, yet most existing in-vehicle methods do not capture the complex processes driving ageing. Electrochemical impedance spectroscopy (EIS) offers deeper diagnostic insight but faces significant architectural and integration constraints. This study establishes a rigorous system-level framework for practicable onboard EIS implementation, focusing on the integration within Battery Management System (BMS) and powertrain architectures. Various integration topologies for cell-, module- and pack-level EIS are evaluated, highlighting their key trade-offs. The viability of the presented architectures is assessed through an application-specific Multi-Criteria Decision Analysis (MCDA) for mass-market, high-performance and circular economy use-cases. This study confirms the feasibility of onboard EIS while providing industry and scientific stakeholders with practical guidance to advance battery diagnostics for next-generation BEVs.
- 18 June 2026
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 17 (6) , 315
Open AccessArchitectural Pathways and Integration Constraints for Feasible Onboard Electrochemical Impedance Spectroscopy for Battery Electric Vehicles
Reliable battery health assessment is essential to accelerate battery electric vehicle (BEV) adoption, yet most existing in-vehicle methods do not capture the complex processes driving ageing. Electrochemical impedance spectroscopy (EIS) offers deeper diagnostic insight but faces significant architectural and integration constraints. This study establishes a rigorous system-level framework for practicable onboard EIS implementation, focusing on the integration within Battery Management System (BMS) and powertrain architectures. Various integration topologies for cell-, module- and pack-level EIS are evaluated, highlighting their key trade-offs. The viability of the presented architectures is assessed through an application-specific Multi-Criteria Decision Analysis (MCDA) for mass-market, high-performance and circular economy use-cases. This study confirms the feasibility of onboard EIS while providing industry and scientific stakeholders with practical guidance to advance battery diagnostics for next-generation BEVs.
- Open Access
- 15 March 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (6) , 1057
Influence of the Nature of Aminoalcohol on ZnO Films Formed by Sol-Gel Methods
Here we present comparative studies of: (i) the formation of ZnO thin films via the sol-gel method using zinc acetate dihydrate (ZAD), 2-methoxyethanol (ME) as solvent, and the aminoalcohols (AA): ethanolamine, (S)-(+)-2-amino-1-propanol, (S)-(+)-2-amino-3-methyl-1-butanol, 2-aminophenol, and aminobenzyl alcohol, and (ii) elemental analyses, infrared spectroscopy, X-ray diffraction, scanning electron microscopy, absorption and emission spectra of films obtained after deposition by drop coating on glass surface, and thermal treatments at 300, 400, 500 and 600 °C. The results obtained provide conclusive evidences of the influence of the AA used (aliphatic vs. aromatic) on the ink stability (prior to deposition), and on the composition, structures, morphologies, and properties of films after calcination, in particular, those due to the different substituents, H, Me, or iPr, and to the presence or the absence of a –CH2 unit. Aliphatic films, more stable and purer than aromatic ones, contained the ZnO wurtzite form for all annealing temperatures, while the cubic sphalerite (zinc-blende) form was also detected after using aromatic AAs. Films having frayed fibers or quartered layers or uniform yarns evolved to “neuron-like” patterns. UV and photoluminescence studies revealed that these AAs also affect the optical band gap, the structural defects, and photo-optical properties of the films.
- 15 March 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (6) , 1057
Open AccessInfluence of the Nature of Aminoalcohol on ZnO Films Formed by Sol-Gel Methods
Here we present comparative studies of: (i) the formation of ZnO thin films via the sol-gel method using zinc acetate dihydrate (ZAD), 2-methoxyethanol (ME) as solvent, and the aminoalcohols (AA): ethanolamine, (S)-(+)-2-amino-1-propanol, (S)-(+)-2-amino-3-methyl-1-butanol, 2-aminophenol, and aminobenzyl alcohol, and (ii) elemental analyses, infrared spectroscopy, X-ray diffraction, scanning electron microscopy, absorption and emission spectra of films obtained after deposition by drop coating on glass surface, and thermal treatments at 300, 400, 500 and 600 °C. The results obtained provide conclusive evidences of the influence of the AA used (aliphatic vs. aromatic) on the ink stability (prior to deposition), and on the composition, structures, morphologies, and properties of films after calcination, in particular, those due to the different substituents, H, Me, or iPr, and to the presence or the absence of a –CH2 unit. Aliphatic films, more stable and purer than aromatic ones, contained the ZnO wurtzite form for all annealing temperatures, while the cubic sphalerite (zinc-blende) form was also detected after using aromatic AAs. Films having frayed fibers or quartered layers or uniform yarns evolved to “neuron-like” patterns. UV and photoluminescence studies revealed that these AAs also affect the optical band gap, the structural defects, and photo-optical properties of the films.
- Open Access
High-Capacity Cells and Batteries for Electric Vehicles
The automotive sector is rapidly accelerating its transformation towards electric mobility, and electric vehicle (EV) sales have been increasing year after year since the beginning of the decade
Open AccessHigh-Capacity Cells and Batteries for Electric Vehicles
The automotive sector is rapidly accelerating its transformation towards electric mobility, and electric vehicle (EV) sales have been increasing year after year since the beginning of the decade
- Top Cited PapersOpen Access
End of Electric Vehicle Batteries: Reuse vs. Recycle
It is a fact that electric vehicles (EVs) are beneficial for climate protection. However, the current challenge is to decide on whether to reuse an EV battery or to recycle it after its first use. This paper theoretically investigates these areas i.e., recycle and reuse. It was found that there are several commercially used recycling processes and also some are under research to regain maximum possible materials and quantity. The concept of reusing (second life) of the battery is promising because, at the end of the first life, batteries from EVs can be used in several applications such as storing energy generated from renewable sources to support the government grid. However, the cost and life-cycle analysis (LCA) demonstrated that there are several aspects involved in battery reuse applications. Henceforth, one LCA generalised method cannot provide an optimal approach for all cases. It is important to have a detailed study on each of the battery reusing applications. Until then, it is safe to say that reusing the battery is a good option as it would give some time to recycling companies to develop cost and energy-efficient methods.
Top Cited PapersOpen AccessEnd of Electric Vehicle Batteries: Reuse vs. Recycle
It is a fact that electric vehicles (EVs) are beneficial for climate protection. However, the current challenge is to decide on whether to reuse an EV battery or to recycle it after its first use. This paper theoretically investigates these areas i.e., recycle and reuse. It was found that there are several commercially used recycling processes and also some are under research to regain maximum possible materials and quantity. The concept of reusing (second life) of the battery is promising because, at the end of the first life, batteries from EVs can be used in several applications such as storing energy generated from renewable sources to support the government grid. However, the cost and life-cycle analysis (LCA) demonstrated that there are several aspects involved in battery reuse applications. Henceforth, one LCA generalised method cannot provide an optimal approach for all cases. It is important to have a detailed study on each of the battery reusing applications. Until then, it is safe to say that reusing the battery is a good option as it would give some time to recycling companies to develop cost and energy-efficient methods.
- Open Access
- 18 October 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (42) , 23839-23846
Role of Ethanolamine on the Stability of a Sol–Gel ZnO Ink
- 18 October 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (42) , 23839-23846
Open AccessRole of Ethanolamine on the Stability of a Sol–Gel ZnO Ink
- 1 February 2014
- Published by Elsevier in Thin Solid Films
- Vol. 553, 118-122
Influence of In and Ga additives onto SnO2 inkjet-printed semiconductor
- 1 February 2014
- Published by Elsevier in Thin Solid Films
- Vol. 553, 118-122
Influence of In and Ga additives onto SnO2 inkjet-printed semiconductor