Syed Mohammad Talha Qadri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Syed Mohammad Talha Qadri has a total of 168 co-authors. Here are the top co-authors by number of shared publications:
- Aminul Islam
Department of Geosciences, Faculty of Science, Universiti Brunei Darussalam, Gadong, Brunei Darussalam
6 shared publications - Mohammed Hail Hakimi
Geology Department, Faculty of Applied Science, Taiz University, Taiz, Yemen
6 shared publications Afikah Rahim
Department of Geotecnics & Transportation, Faculty of Civil Engineering Universiti Teknologi Malaysia Johor Bahru Malaysia
5 shared publicationsAref Lashin
College of Engineering‐Petroleum and Natural Gas Engineering Department King Saud University Riyadh Saudi Arabia
5 shared publications- Afroz Ahmad Shah
Faculty of Science, Universiti Brunei Darussalam, Gadong BE1410, Brunei
4 shared publications - Mohamed Ragab Shalaby
Department of Geosciences, Universiti Brunei Darussalam, Gadong, Brunei Darussalam
4 shared publications
Latest Publications
- Open Access
Geological Characterization and Carbon Storage Potential of the Moose Channel Formation in the Mackenzie Delta, Northwest Territories, Canada
The importance of geological carbon storage in reducing anthropogenic CO2 emissions has increased significantly globally and in Canada; however, the storage potential of sedimentary basins in Canada’s Northwest Territories remains unestablished. This first-ever formation-scale assessment of geological carbon storage potential focused on the Basal Sandstone Member of the Moose Channel Formation in the Mackenzie Delta, Canada’s Northwest Territories. We used an integrated approach, combining field observations, laboratory analysis, petrophysical analysis, seismic interpretation, 3D geomodelling, and probabilistic volumetric analysis to establish the reservoir character and long-term storage potential. The investigated reservoir lies in a structurally complex, fault-compartmentalized interval, with an ideal storage zone at 1150 m and 1600 m subsea, deemed adequate for CO2 storage. Petrophysical investigations indicate that the Moose Channel Formation is a heterogeneous reservoir, with porosity ranging from 12.4% to 18.8% and core-based permeability up to 5 mD, whereas the 3D geomodel of permeability shows certain sectors with values up to 35 mD. Moreover, we assessed the caprock’s potential to support long-term CO2 containment based on its low permeability, adequate capillary entry pressures, and regional extent; the caprock succession overlying the Moose Channel Formation was established to support containment and prevent CO2 escape to the atmosphere. 3D geological modeling identified a favorable sub-area within the mapped structural closure where burial depth, porosity, permeability, shale volume, trapping geometry, and reservoir connectivity are most favorable, and which is recommended for further, site-specific characterization. Furthermore, a stochastic Monte Carlo probabilistic volumetric analysis (N = 500,000 realizations, sampling reservoir thickness, porosity, net-to-gross, water saturation, CO2 saturation, and efficiency factor from continuous distributions) was conducted to estimate static CO2 storage capacity, yielding a P90–P50–P10 range of 6.0–12.4–23.3 MtCO2 (mean 13.8 MtCO2; equivalent to an accessible pore volume of 6.9–14.2–26.5 million cubic meters). This study provides a foundation for CO2 evaluation in the Mackenzie Delta and highlights the Moose Channel Formation as a prospective CO2 storage candidate. The present study also requires further analysis, such as geochemical characterization and modeling, fault-seal analysis, and dynamic reservoir simulation, to validate key phases of injectivity and containment performance, leading to the long-term viability of CO2 storage in the Mackenzie Delta.
Open AccessGeological Characterization and Carbon Storage Potential of the Moose Channel Formation in the Mackenzie Delta, Northwest Territories, Canada
The importance of geological carbon storage in reducing anthropogenic CO2 emissions has increased significantly globally and in Canada; however, the storage potential of sedimentary basins in Canada’s Northwest Territories remains unestablished. This first-ever formation-scale assessment of geological carbon storage potential focused on the Basal Sandstone Member of the Moose Channel Formation in the Mackenzie Delta, Canada’s Northwest Territories. We used an integrated approach, combining field observations, laboratory analysis, petrophysical analysis, seismic interpretation, 3D geomodelling, and probabilistic volumetric analysis to establish the reservoir character and long-term storage potential. The investigated reservoir lies in a structurally complex, fault-compartmentalized interval, with an ideal storage zone at 1150 m and 1600 m subsea, deemed adequate for CO2 storage. Petrophysical investigations indicate that the Moose Channel Formation is a heterogeneous reservoir, with porosity ranging from 12.4% to 18.8% and core-based permeability up to 5 mD, whereas the 3D geomodel of permeability shows certain sectors with values up to 35 mD. Moreover, we assessed the caprock’s potential to support long-term CO2 containment based on its low permeability, adequate capillary entry pressures, and regional extent; the caprock succession overlying the Moose Channel Formation was established to support containment and prevent CO2 escape to the atmosphere. 3D geological modeling identified a favorable sub-area within the mapped structural closure where burial depth, porosity, permeability, shale volume, trapping geometry, and reservoir connectivity are most favorable, and which is recommended for further, site-specific characterization. Furthermore, a stochastic Monte Carlo probabilistic volumetric analysis (N = 500,000 realizations, sampling reservoir thickness, porosity, net-to-gross, water saturation, CO2 saturation, and efficiency factor from continuous distributions) was conducted to estimate static CO2 storage capacity, yielding a P90–P50–P10 range of 6.0–12.4–23.3 MtCO2 (mean 13.8 MtCO2; equivalent to an accessible pore volume of 6.9–14.2–26.5 million cubic meters). This study provides a foundation for CO2 evaluation in the Mackenzie Delta and highlights the Moose Channel Formation as a prospective CO2 storage candidate. The present study also requires further analysis, such as geochemical characterization and modeling, fault-seal analysis, and dynamic reservoir simulation, to validate key phases of injectivity and containment performance, leading to the long-term viability of CO2 storage in the Mackenzie Delta.
- 15 March 2026
- Published by Wiley in Geological Journal
Multi‐Scale Organic Geochemical Dataset and 1D ‐ Basin Modelling Analysis for Gas Generation Potential of the Mid Cretaceous Hoiho Formation in the Offshore Great South Basin, New Zealand
The present work characterises coal‐bearing deposits of the Mid‐Cretaceous Hoiho Formation, located in the offshore Great South Basin, New Zealand, through a multidisciplinary approach involving geochemical analyses, biomarker evaluation, stable carbon isotope measurements, and one‐dimensional basin modelling. This study aims to characterise the organic matter (OM) present within the Hoiho coal facies and elucidate the mechanisms responsible for gas generation. Biomarker analysis combined with carbon isotope data was employed to assess the sources of OM and reconstruct the depositional environment conditions. The Hoiho coals exhibit high total organic carbon (TOC) and sulfur (S) concentrations, indicating marine‐influenced coaly facies. The high TOC and S result in high TOC/S ratios and further suggest that the Hoiho coal facies was deposited in high‐oxygenated environments. This interpretation is further reinforced by the specific biomarker ratios, such as a high pristane/phytane ratio of more than 3 and a low dibenzothiophene/phenanthrene ratio. Hence, the elevated organic carbon, with TOC content reaching up to 79.8 wt. % in the Hoiho coal facies cannot be solely attributed to low‐oxygen depositional settings. Molecular biomarker signatures combined with carbon isotopic data suggest that the OM in the Hoiho coal facies is primarily derived from terrigenous sources and accumulated in fluvial to fluvio‐deltaic environments, as indicated by high T m / T s and C 24 Te/C 26 Ti ratios, along with the predominance of C 29 over its C 27 and C 28 counterparts. This high abundance of terrigenous plants in the studied coal facies indicates that hydrogen‐poor Type III kerogen was the original OM input during deposition. This finding is consistent with the low hydrogen index (HI) values, between 111 and 292 mg HC/g TOC, indicative of predominantly Type III kerogen for mainly gas generation potential. Kerogen transformation modelling reveals that approximately 10% to 54% of the primary Type III kerogen underwent cracking to generate gas from the Late Eocene to present, corresponding to the wet gas generation window, with Easy %Ro values up to 1.72%. Consequently, the Mid Cretaceous Hoiho coal facies can be considered as a promising target for gas development within the deeper stratigraphic intervals of the offshore Great South Basin.
- 15 March 2026
- Published by Wiley in Geological Journal
Multi‐Scale Organic Geochemical Dataset and 1D ‐ Basin Modelling Analysis for Gas Generation Potential of the Mid Cretaceous Hoiho Formation in the Offshore Great South Basin, New Zealand
The present work characterises coal‐bearing deposits of the Mid‐Cretaceous Hoiho Formation, located in the offshore Great South Basin, New Zealand, through a multidisciplinary approach involving geochemical analyses, biomarker evaluation, stable carbon isotope measurements, and one‐dimensional basin modelling. This study aims to characterise the organic matter (OM) present within the Hoiho coal facies and elucidate the mechanisms responsible for gas generation. Biomarker analysis combined with carbon isotope data was employed to assess the sources of OM and reconstruct the depositional environment conditions. The Hoiho coals exhibit high total organic carbon (TOC) and sulfur (S) concentrations, indicating marine‐influenced coaly facies. The high TOC and S result in high TOC/S ratios and further suggest that the Hoiho coal facies was deposited in high‐oxygenated environments. This interpretation is further reinforced by the specific biomarker ratios, such as a high pristane/phytane ratio of more than 3 and a low dibenzothiophene/phenanthrene ratio. Hence, the elevated organic carbon, with TOC content reaching up to 79.8 wt. % in the Hoiho coal facies cannot be solely attributed to low‐oxygen depositional settings. Molecular biomarker signatures combined with carbon isotopic data suggest that the OM in the Hoiho coal facies is primarily derived from terrigenous sources and accumulated in fluvial to fluvio‐deltaic environments, as indicated by high T m / T s and C 24 Te/C 26 Ti ratios, along with the predominance of C 29 over its C 27 and C 28 counterparts. This high abundance of terrigenous plants in the studied coal facies indicates that hydrogen‐poor Type III kerogen was the original OM input during deposition. This finding is consistent with the low hydrogen index (HI) values, between 111 and 292 mg HC/g TOC, indicative of predominantly Type III kerogen for mainly gas generation potential. Kerogen transformation modelling reveals that approximately 10% to 54% of the primary Type III kerogen underwent cracking to generate gas from the Late Eocene to present, corresponding to the wet gas generation window, with Easy %Ro values up to 1.72%. Consequently, the Mid Cretaceous Hoiho coal facies can be considered as a promising target for gas development within the deeper stratigraphic intervals of the offshore Great South Basin.
- 5 January 2026
- Published by Springer Nature in Natural Resources Research
- Vol. 35 (3) , 1661-1690
Unlocking the Hydrocarbon Potential of the Canterbury Basin, New Zealand: Geochemical and Basin Modeling Insights for Hydrocarbon Exploration
- 5 January 2026
- Published by Springer Nature in Natural Resources Research
- Vol. 35 (3) , 1661-1690
Unlocking the Hydrocarbon Potential of the Canterbury Basin, New Zealand: Geochemical and Basin Modeling Insights for Hydrocarbon Exploration
- 16 December 2025
- Published by Geological Society of London in Petroleum Geoscience
- Vol. 32 (1)
Multi-scale geochemical, mineralogical and petrographical dataset for the shale oil-bearing reservoir potential: an example from the Lower Jurassic Datta Formation in the Upper Indus Basin, Pakistan
The organic-rich shale facies of the Lower Jurassic Datta Formation in the Upper Indus Basin in Pakistan was studied using geological and geochemical investigations to assess the unconventional shale oil reservoir potential. The Datta shale facies is a promising oil-prone stratum, consisting of total organic carbon (TOC) exceeding 2 wt%, and primarily comprising Type II and II/III kerogens, with a hydrogen index (HI) exceeding 250 mgHC g −1 TOC. The Datta shale facies is also characterized by higher free hydrocarbon (S 1 ) content than TOC, resulting in a high oil saturation index (OSI) between 30.81 and 298.7 mgHC g −1 TOC, wherein the high OSI of more than 100 mgHC g −1 TOC indicates a strong potential for oil production. This finding is consistent with the current thermally mature oil window, which ranges between early mature and peak mature, as supported by vitrinite reflectance (%VR o ) values of up to 0.82. This main oil-generation window leads to the conversion of extensive hydrogen-rich kerogen for commercial oil generation, with a transformation ratio (TR) of up to 65%, as demonstrated by 1D basin modelling. Maximum oil generation, with TR values exceeding 50%, leads to high pressure and results in microfracture pores in the Datta shale facies. The presence of non-fabric-fracture pores is confirmed by high-resolution petrographical scanning electron microscopy (SEM). Consequently, these findings highlight that the Datta shale facies should be considered for use as an unconventional shale oil reservoir, with the suggestion of hydraulic fracturing techniques for production purposes.
- 16 December 2025
- Published by Geological Society of London in Petroleum Geoscience
- Vol. 32 (1)
Multi-scale geochemical, mineralogical and petrographical dataset for the shale oil-bearing reservoir potential: an example from the Lower Jurassic Datta Formation in the Upper Indus Basin, Pakistan
The organic-rich shale facies of the Lower Jurassic Datta Formation in the Upper Indus Basin in Pakistan was studied using geological and geochemical investigations to assess the unconventional shale oil reservoir potential. The Datta shale facies is a promising oil-prone stratum, consisting of total organic carbon (TOC) exceeding 2 wt%, and primarily comprising Type II and II/III kerogens, with a hydrogen index (HI) exceeding 250 mgHC g −1 TOC. The Datta shale facies is also characterized by higher free hydrocarbon (S 1 ) content than TOC, resulting in a high oil saturation index (OSI) between 30.81 and 298.7 mgHC g −1 TOC, wherein the high OSI of more than 100 mgHC g −1 TOC indicates a strong potential for oil production. This finding is consistent with the current thermally mature oil window, which ranges between early mature and peak mature, as supported by vitrinite reflectance (%VR o ) values of up to 0.82. This main oil-generation window leads to the conversion of extensive hydrogen-rich kerogen for commercial oil generation, with a transformation ratio (TR) of up to 65%, as demonstrated by 1D basin modelling. Maximum oil generation, with TR values exceeding 50%, leads to high pressure and results in microfracture pores in the Datta shale facies. The presence of non-fabric-fracture pores is confirmed by high-resolution petrographical scanning electron microscopy (SEM). Consequently, these findings highlight that the Datta shale facies should be considered for use as an unconventional shale oil reservoir, with the suggestion of hydraulic fracturing techniques for production purposes.
- Open Access
- 1 January 2025
- Published by China Geology in China Geology
- Vol. 8 (4) , 725-739
Organic geochemistry and basin modeling of the Eocene Mangahewa source rock system in the Pohokura oilfield, Taranaki Basin (New Zealand) and their indication of oil and gas potential
- 1 January 2025
- Published by China Geology in China Geology
- Vol. 8 (4) , 725-739
Open AccessOrganic geochemistry and basin modeling of the Eocene Mangahewa source rock system in the Pohokura oilfield, Taranaki Basin (New Zealand) and their indication of oil and gas potential
- 17 August 2024
- Published by Springer Nature in Journal of Sedimentary Environments
- Vol. 9 (4) , 747-789
Hydrocarbon prospectivity of the South Atlantic Orange Basin
- 17 August 2024
- Published by Springer Nature in Journal of Sedimentary Environments
- Vol. 9 (4) , 747-789
Hydrocarbon prospectivity of the South Atlantic Orange Basin
- 23 April 2024
- Published by Wiley in Geological Journal
- Vol. 59 (6) , 1703-1723
Organic geochemical characteristics of the Late Cretaceous coal and carbonaceous shale succession from the Taranaki Basin, New Zealand: Implications for sedimentary environmental setting and petroleum generation potential
This comprehensive study investigates the organic matter characteristics within the Late Cretaceous Rakopi and Taniwha formations, based on data from four exploration wells situated in New Zealand's Taranaki Basin. It employs a multifaceted approach, integrating bulk geochemical analyses, biomarker measurements and carbon isotopes to unveil the geological history of these formations. Analytical results include total organic carbon content, ranging from 7.27 to 75.78 wt%, and generation potentials spanning from 28.24 to 309.16 mg hydrocarbon/g rock. These observations underscore the source rock potential of these Late Cretaceous strata. These rocks show a mixed organic matter of hydrogen‐rich Type II and Type II/III kerogens, as evidenced by hydrogen index values (HI) between 237 to 428 mg hydrocarbon/g rock. These formations demonstrate promise potential for both oil and gas generation. Biomarker analysis uncovers distinct signatures, featuring a pristane/phytane (Pr/Ph) ratio ranging from 3.27 to 10.91, a Tm/Ts ratio surpassing 7 and elevated concentrations of C29 regular steranes relative to C27 and C28 regular steranes. These biomarker characteristics suggest a composite organic matter composition, influenced by terrigenous organic matter, likely deposited in oxygenated fluvial deltaic environments. Bulk carbon isotopic data corroborate these findings, highlighting the abundance of terrigenous organic matter. Collectively, these insights reveal that the coal and carbonaceous shale intervals in the examined wells are in the early stages of oil generation. Therefore, the Rakopi and Taniwha formations have not yet yielded commercially viable oil and/or gas quantities. In this case, these formations hold substantial promise for future exploration activities in relatively deep wells, with limited oil expulsion from coals.
- 23 April 2024
- Published by Wiley in Geological Journal
- Vol. 59 (6) , 1703-1723
Organic geochemical characteristics of the Late Cretaceous coal and carbonaceous shale succession from the Taranaki Basin, New Zealand: Implications for sedimentary environmental setting and petroleum generation potential
This comprehensive study investigates the organic matter characteristics within the Late Cretaceous Rakopi and Taniwha formations, based on data from four exploration wells situated in New Zealand's Taranaki Basin. It employs a multifaceted approach, integrating bulk geochemical analyses, biomarker measurements and carbon isotopes to unveil the geological history of these formations. Analytical results include total organic carbon content, ranging from 7.27 to 75.78 wt%, and generation potentials spanning from 28.24 to 309.16 mg hydrocarbon/g rock. These observations underscore the source rock potential of these Late Cretaceous strata. These rocks show a mixed organic matter of hydrogen‐rich Type II and Type II/III kerogens, as evidenced by hydrogen index values (HI) between 237 to 428 mg hydrocarbon/g rock. These formations demonstrate promise potential for both oil and gas generation. Biomarker analysis uncovers distinct signatures, featuring a pristane/phytane (Pr/Ph) ratio ranging from 3.27 to 10.91, a Tm/Ts ratio surpassing 7 and elevated concentrations of C29 regular steranes relative to C27 and C28 regular steranes. These biomarker characteristics suggest a composite organic matter composition, influenced by terrigenous organic matter, likely deposited in oxygenated fluvial deltaic environments. Bulk carbon isotopic data corroborate these findings, highlighting the abundance of terrigenous organic matter. Collectively, these insights reveal that the coal and carbonaceous shale intervals in the examined wells are in the early stages of oil generation. Therefore, the Rakopi and Taniwha formations have not yet yielded commercially viable oil and/or gas quantities. In this case, these formations hold substantial promise for future exploration activities in relatively deep wells, with limited oil expulsion from coals.
- Open Access
- 15 March 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (12) , 14123-14141
Geochemical Evaluation of Paleocene Source Rocks in the Kohat Sub-Basin, Pakistan
The Kohat sub-basin is one of the main hydrocarbon-producing sedimentary basins located in the northwest extension of the Indus Basin in Pakistan. It contains numerous proven and potential petroleum from the Cambrian to the Miocene. Conventional petroleum resources have been depleting rapidly over the last couple of years. Therefore, unconventional resources should be explored using a variety of geochemical and geophysical techniques to address the energy demands. Geochemical techniques, including total organic carbon (TOC) assessment, Rock-Eval pyrolysis, organic petrography, and biomarker studies, are essential for evaluating the potential of shale gas reservoirs to delineate future prospects in a basin. The source rock potential of the Paleocene rocks, including the Patala, Lockhart, and Hangu formations of the sub-basin, is evaluated using geochemical analyses on well cuttings from the Tolanj-01 well. The analyses include estimation of total organic carbon (TOC), Rock-Eval pyrolysis, and organic petrography (vitrinite reflectance) to evaluate the organic richness, thermal maturity, kerogen type, hydrocarbon type, and environment of deposition. Other techniques for extractable organic matter (EOM) include solid-liquid chromatographic separation of fractions, gas chromatography (GC-FID)/whole oil chromatography, and gas chromatography-mass spectrometry (GC-MS). The organic matter (TOC, wt %) analysis reveals that 18 (18) samples of the Hangu formation (0.08-1.8 wt %) show poor values, 12 (12) samples of the Lockhart formation (0.05-0.5 wt %) have poor to fair content, and 26 (26) samples of the Patala formation have poor to fair (0.08-0.19 wt %) TOC content. Rock-Eval pyrolysis studies including hydrogen index, oxygen index, Tmax, quantities of free hydrocarbons (S1, mg/g), and hydrocarbons produced from pyrolysis (S2, mg/g) are determined for the well-cut samples (56) of the Paleocene rocks. The hydrogen index values for the Hangu formation are lower than 200, and those for the Lockhart and Patala formations range between 100 and 250. A maceral analysis is also conducted on these samples, which reveal that the majority of the samples of the Paleocene units present in the basin belong to kerogen types II/III. The thermal maturity of the Hangu and Lockhart formations falls in the late-stage oil window, while that of the Patala formation falls in the peak to late oil window. The genetic potential (GP) for these rock units is also determined based on S1 and S2 values, which reveals that it is generally poor except for a few samples of the Hangu and Lockhart formations, which show fair GP values. For the organic petrography (vitrinite reflectance, R0), one sample from each unit is selected, which shows that the Hangu, Lockhart, and Patala formations fall in the category of the mature oil window with their R0 (%) values being 0.95, 0.89, and 0.82, respectively. The extracts (EOM) from these rock units are also analyzed to assess the depositional settings, biological source input, biodegradation, thermal maturity, etc. The greater values of pristine to phytane (Pr/Ph > 1) ratios for Hangu (1.33), Lockhart (1.23), and Patala (1.8) indicate an intermediate condition (suboxic), while a cross-plot of Pr/n-C17-Ph/n-C18 shows that the organic matter is deposited in a transitional setting. The ratios between C19TCT/C19 TCT + C23 TCT and C24 TeCT/C24TeCT + C23TCT biological source inputs are mainly of marine origin. Similarly, the ternary diagram of regular steranes (C27-C28-C29) shows a greater marine input. Lower values of the carbon preference index (CPI1) for Hangu (0.95), Lockhart (0.91), and Patala (1.04) indicate higher thermal maturity of the Paleocene rocks. Similarly, the methylphenanthrene index (MPI-1) values, Moretane index, and Pr/n-C17 vs Ph/n-C18 plots also show higher thermal maturity for these rock extracts.
- 15 March 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (12) , 14123-14141
Open AccessGeochemical Evaluation of Paleocene Source Rocks in the Kohat Sub-Basin, Pakistan
The Kohat sub-basin is one of the main hydrocarbon-producing sedimentary basins located in the northwest extension of the Indus Basin in Pakistan. It contains numerous proven and potential petroleum from the Cambrian to the Miocene. Conventional petroleum resources have been depleting rapidly over the last couple of years. Therefore, unconventional resources should be explored using a variety of geochemical and geophysical techniques to address the energy demands. Geochemical techniques, including total organic carbon (TOC) assessment, Rock-Eval pyrolysis, organic petrography, and biomarker studies, are essential for evaluating the potential of shale gas reservoirs to delineate future prospects in a basin. The source rock potential of the Paleocene rocks, including the Patala, Lockhart, and Hangu formations of the sub-basin, is evaluated using geochemical analyses on well cuttings from the Tolanj-01 well. The analyses include estimation of total organic carbon (TOC), Rock-Eval pyrolysis, and organic petrography (vitrinite reflectance) to evaluate the organic richness, thermal maturity, kerogen type, hydrocarbon type, and environment of deposition. Other techniques for extractable organic matter (EOM) include solid-liquid chromatographic separation of fractions, gas chromatography (GC-FID)/whole oil chromatography, and gas chromatography-mass spectrometry (GC-MS). The organic matter (TOC, wt %) analysis reveals that 18 (18) samples of the Hangu formation (0.08-1.8 wt %) show poor values, 12 (12) samples of the Lockhart formation (0.05-0.5 wt %) have poor to fair content, and 26 (26) samples of the Patala formation have poor to fair (0.08-0.19 wt %) TOC content. Rock-Eval pyrolysis studies including hydrogen index, oxygen index, Tmax, quantities of free hydrocarbons (S1, mg/g), and hydrocarbons produced from pyrolysis (S2, mg/g) are determined for the well-cut samples (56) of the Paleocene rocks. The hydrogen index values for the Hangu formation are lower than 200, and those for the Lockhart and Patala formations range between 100 and 250. A maceral analysis is also conducted on these samples, which reveal that the majority of the samples of the Paleocene units present in the basin belong to kerogen types II/III. The thermal maturity of the Hangu and Lockhart formations falls in the late-stage oil window, while that of the Patala formation falls in the peak to late oil window. The genetic potential (GP) for these rock units is also determined based on S1 and S2 values, which reveals that it is generally poor except for a few samples of the Hangu and Lockhart formations, which show fair GP values. For the organic petrography (vitrinite reflectance, R0), one sample from each unit is selected, which shows that the Hangu, Lockhart, and Patala formations fall in the category of the mature oil window with their R0 (%) values being 0.95, 0.89, and 0.82, respectively. The extracts (EOM) from these rock units are also analyzed to assess the depositional settings, biological source input, biodegradation, thermal maturity, etc. The greater values of pristine to phytane (Pr/Ph > 1) ratios for Hangu (1.33), Lockhart (1.23), and Patala (1.8) indicate an intermediate condition (suboxic), while a cross-plot of Pr/n-C17-Ph/n-C18 shows that the organic matter is deposited in a transitional setting. The ratios between C19TCT/C19 TCT + C23 TCT and C24 TeCT/C24TeCT + C23TCT biological source inputs are mainly of marine origin. Similarly, the ternary diagram of regular steranes (C27-C28-C29) shows a greater marine input. Lower values of the carbon preference index (CPI1) for Hangu (0.95), Lockhart (0.91), and Patala (1.04) indicate higher thermal maturity of the Paleocene rocks. Similarly, the methylphenanthrene index (MPI-1) values, Moretane index, and Pr/n-C17 vs Ph/n-C18 plots also show higher thermal maturity for these rock extracts.