Tuba Tortop
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Tuba Tortop has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Emine Kaygisiz
Department of Orthodontics, Faculty of Dentistry, Gazi University, Ankara, Turkey
7 shared publications Sema Yüksel
Department of Orthodontics, Faculty of Dentistry, Gazi University, Ankara, Turkey
4 shared publications- Sema Yüksel
Gazi University
4 shared publications - Erdal Bozkaya
Department of Orthodontics, Faculty of Dentistry, Gazi University, Ankara, Turkey
3 shared publications Deniz Gencer
A Private Practice, Ankara, Turkey
2 shared publications- Fatma Deniz Uzuner
Department of Orthodontics, Faculty of Dentistry, Gazi University , Ankara , Turkey
2 shared publications
Latest Publications
- 20 May 2026
- Published by Ankara Dis Hekimleri Odasi in ADO Klinik Bilimler Dergisi
- Vol. 15 (2) , 114-121
Comparison of Mean Mandibular Dental Arch Dimensions and Preformed Copper Nickel Titanium Archwire Dimensions: A Retrospective Study
Aim: Selection of an appropriate archwire form is critical for maintaining the natural dental arch and ensuring post-treatment stability. Preformed copper-nickel-titanium (CuNiTi) archwires are widely used in contemporary orthodontics and are often designed with broader arch forms. This study aimed to determine the average mandibular dental arch dimensions to compare them with those of preformed CuNiTi archwires.Materials and Methods: Three-dimensional intraoral scans of 44 individuals with untreated class I malocclusion and minimal crowding/diastema were evaluated. Mandibular intercanine and intermolar widths, as well as canine and molar arch depths, were measured using a bracket slot point-based reference system. Eleven commonly used preformed CuNiTi archwires from five manufacturers were selected, and their corresponding dimensions were measured. Differences between individual dental arch measurements and corresponding archwire dimensions were analyzed using one-sample t-tests, with p < 0.05 as the level of statistical significance.Results: All evaluated preformed CuNiTi archwires differed significantly from the natural mandibular intercanine width (p 0.05), whereas the remaining archwires demonstrated significant discrepancies.Conclusion: None of the evaluated archwires matched the intercanine width, and limited compatibility was observed in the intermolar region. These findings suggest that dimensional discrepancies are mainly concentrated in the intercanine region, emphasizing the importance of individualized archwire selection to preserve mandibular arch stability.
- 20 May 2026
- Published by Ankara Dis Hekimleri Odasi in ADO Klinik Bilimler Dergisi
- Vol. 15 (2) , 114-121
Comparison of Mean Mandibular Dental Arch Dimensions and Preformed Copper Nickel Titanium Archwire Dimensions: A Retrospective Study
Aim: Selection of an appropriate archwire form is critical for maintaining the natural dental arch and ensuring post-treatment stability. Preformed copper-nickel-titanium (CuNiTi) archwires are widely used in contemporary orthodontics and are often designed with broader arch forms. This study aimed to determine the average mandibular dental arch dimensions to compare them with those of preformed CuNiTi archwires.Materials and Methods: Three-dimensional intraoral scans of 44 individuals with untreated class I malocclusion and minimal crowding/diastema were evaluated. Mandibular intercanine and intermolar widths, as well as canine and molar arch depths, were measured using a bracket slot point-based reference system. Eleven commonly used preformed CuNiTi archwires from five manufacturers were selected, and their corresponding dimensions were measured. Differences between individual dental arch measurements and corresponding archwire dimensions were analyzed using one-sample t-tests, with p < 0.05 as the level of statistical significance.Results: All evaluated preformed CuNiTi archwires differed significantly from the natural mandibular intercanine width (p 0.05), whereas the remaining archwires demonstrated significant discrepancies.Conclusion: None of the evaluated archwires matched the intercanine width, and limited compatibility was observed in the intermolar region. These findings suggest that dimensional discrepancies are mainly concentrated in the intercanine region, emphasizing the importance of individualized archwire selection to preserve mandibular arch stability.
- Open Access
- 27 April 2026
- Published by Springer Nature in BMC Medical Education
- Vol. 26 (1)
A perspective on moral sensitivity: undergraduate dentistry students and orthodontic clinicians
In dentistry, moral judgment skills are a fundamental competency that helps dentists make the best decisions when faced with challenging clinical problems
- 27 April 2026
- Published by Springer Nature in BMC Medical Education
- Vol. 26 (1)
Open AccessA perspective on moral sensitivity: undergraduate dentistry students and orthodontic clinicians
In dentistry, moral judgment skills are a fundamental competency that helps dentists make the best decisions when faced with challenging clinical problems
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Oral Research
- Vol. 40, e031
Evaluation of the impacted upper canine and maxillary sinus dimensions using cone beam computed tomography
This study aimed use cone beam computed tomography (CBCT) to compare the maxillary sinus volume and transverse dimensions between sides with and without palatally impacted maxillary canines. The CBCT records of 47 patients with unilateral palatally impacted canines (18 males, 29 females; mean age: 22.19 ± 7.71 years) were included. The maxillary sinus volume was measured using semiautomatic segmentation, and transversal maxillary dimensions were assessed in the posterior region. Deviation of the nasal septum and alveolar pneumatization were also evaluated. Statistical analyses were performed using SPSS 25.0 with a significance level set at p < 0.05. As compared with the nonimpacted side, the maxillary and molar basal widths were significantly smaller and the septum deviation angle was greater on the impacted side (p < 0.05). A one-unit increase in the septal deviation angle increased the probability of impaction by 1.177 times. A negative correlation was detected between the maxillary sinus intensity and zygomatic width, molar basal width, and molar alveolar width (r = 0.431, 0.316, and 0.351, respectively). The incidence of pathological sinus findings did not differ significantly between sides (38.3% vs. 51.06%). Similarly, the rates of alveolar pneumatization were comparable (51.06% vs. 48.94%). The mean sinus volumes were 13,147.96 voxels on the impacted side and 13,194.38 voxels on the nonimpacted side, with no significant difference (p > 0.05). In conclusion, although palatally impacted maxillary canines are associated with narrower posterior maxillary transverse dimensions and increased septal deviation, they do not have a considerable effect on the maxillary sinus volume. These findings provide clinically relevant information for orthodontic diagnosis and surgical planning.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Oral Research
- Vol. 40, e031
Open AccessEvaluation of the impacted upper canine and maxillary sinus dimensions using cone beam computed tomography
This study aimed use cone beam computed tomography (CBCT) to compare the maxillary sinus volume and transverse dimensions between sides with and without palatally impacted maxillary canines. The CBCT records of 47 patients with unilateral palatally impacted canines (18 males, 29 females; mean age: 22.19 ± 7.71 years) were included. The maxillary sinus volume was measured using semiautomatic segmentation, and transversal maxillary dimensions were assessed in the posterior region. Deviation of the nasal septum and alveolar pneumatization were also evaluated. Statistical analyses were performed using SPSS 25.0 with a significance level set at p < 0.05. As compared with the nonimpacted side, the maxillary and molar basal widths were significantly smaller and the septum deviation angle was greater on the impacted side (p < 0.05). A one-unit increase in the septal deviation angle increased the probability of impaction by 1.177 times. A negative correlation was detected between the maxillary sinus intensity and zygomatic width, molar basal width, and molar alveolar width (r = 0.431, 0.316, and 0.351, respectively). The incidence of pathological sinus findings did not differ significantly between sides (38.3% vs. 51.06%). Similarly, the rates of alveolar pneumatization were comparable (51.06% vs. 48.94%). The mean sinus volumes were 13,147.96 voxels on the impacted side and 13,194.38 voxels on the nonimpacted side, with no significant difference (p > 0.05). In conclusion, although palatally impacted maxillary canines are associated with narrower posterior maxillary transverse dimensions and increased septal deviation, they do not have a considerable effect on the maxillary sinus volume. These findings provide clinically relevant information for orthodontic diagnosis and surgical planning.
- Open Access
- 2 May 2023
- Published by Acta Odontologica Turcica in Acta Odontologica Turcica
- Vol. 40 (2) , 37-42
Evaluation of the effect of upper first premolar extraction on maxillary and mandibular posterior space
Amaç: Üst birinci premolar çekiminin maksiller ve mandibular posterior boşluğa olan etkisinin değerlendirilmesidir. Gereç ve Yöntem: Çalışmanın materyalini, dişsel Sınıf II maloklüzyona sahip, üst iki birinci premolar çekimi ile sabit apareylerle tedavi edilmiş 20 bireyin tedavi öncesi (T1), sonrası (T2) ve pekiştirme sonrası (T3) lateral sefalometrik radyografileri oluşturdu. Lateral sefalometrik radyografiler üzerinde, yedi boyutsal ve dört açısal ölçüm aynı yazar tarafından yapıldı. İstatistiksel analizde, sürekli sayısal değişkenlerin dağılımının normale yakın dağılıp dağılmadığı Shapiro-Wilk testiyle incelendi. Ölçüm ortalamalarında istatistiksel olarak anlamlı değişim olup olmadığı parametrik verilerde Wilks’in Lambda testi, nonparametrik verilerde ise Friedman testiyle incelenerek; Bonferroni düzeltmeli çoklu karşılaştırma ya da Dunn-Bonferroni post-hoc testler uygulandı. p<0.05 değeri anlamlı olarak kabul edildi. Bulgular: SNB açısı T3’te T1’e göre anlamlı düzeyde arttığı bulundu (p<0.05). ANB açısı T3’te T1’e göre anlamlı düzeyde azaldığı bulundu (p<0.05). T1’e göre hem T2 hem de T3’te U1-NA mesafesinin anlamlı düzeyde azaldığı bulundu (p<0.001). T1’e göre hem T2 hem de T3’te ve T2’ye göre T3’te U6-PTV mesafesinin anlamlı düzeyde arttığı bulundu (p<0.001). T1’e göre hem T2 (p<0.01) hem de T3’te (p<0.001) ve T2’ye göre T3’te CLMD (p<0.05) mesafesinin anlamlı düzeyde arttığı bulundu. T1’e göre hem T2 hem de T3’te ve T2’ye göre T3’te DC mesafesinin anlamlı düzeyde arttığı bulundu (p<0.001). CL1 mesafesi T3’te T1’e göre anlamlı düzeyde artmış bulundu (p<0.05). Sonuç: Maksiller posterior boşlukta premolar çekimine bağlı olarak artış izlenmiştir. Mandibular posterior boşlukta izlenen artışın maksiller posterior boşluktan daha az olduğu görülmüştür. Maksiller kesici dişlerde retraksiyon ve maksiller molarlarda meziyalizasyon hareketi izlenmiştir.
- 2 May 2023
- Published by Acta Odontologica Turcica in Acta Odontologica Turcica
- Vol. 40 (2) , 37-42
Open AccessEvaluation of the effect of upper first premolar extraction on maxillary and mandibular posterior space
Amaç: Üst birinci premolar çekiminin maksiller ve mandibular posterior boşluğa olan etkisinin değerlendirilmesidir. Gereç ve Yöntem: Çalışmanın materyalini, dişsel Sınıf II maloklüzyona sahip, üst iki birinci premolar çekimi ile sabit apareylerle tedavi edilmiş 20 bireyin tedavi öncesi (T1), sonrası (T2) ve pekiştirme sonrası (T3) lateral sefalometrik radyografileri oluşturdu. Lateral sefalometrik radyografiler üzerinde, yedi boyutsal ve dört açısal ölçüm aynı yazar tarafından yapıldı. İstatistiksel analizde, sürekli sayısal değişkenlerin dağılımının normale yakın dağılıp dağılmadığı Shapiro-Wilk testiyle incelendi. Ölçüm ortalamalarında istatistiksel olarak anlamlı değişim olup olmadığı parametrik verilerde Wilks’in Lambda testi, nonparametrik verilerde ise Friedman testiyle incelenerek; Bonferroni düzeltmeli çoklu karşılaştırma ya da Dunn-Bonferroni post-hoc testler uygulandı. p<0.05 değeri anlamlı olarak kabul edildi. Bulgular: SNB açısı T3’te T1’e göre anlamlı düzeyde arttığı bulundu (p<0.05). ANB açısı T3’te T1’e göre anlamlı düzeyde azaldığı bulundu (p<0.05). T1’e göre hem T2 hem de T3’te U1-NA mesafesinin anlamlı düzeyde azaldığı bulundu (p<0.001). T1’e göre hem T2 hem de T3’te ve T2’ye göre T3’te U6-PTV mesafesinin anlamlı düzeyde arttığı bulundu (p<0.001). T1’e göre hem T2 (p<0.01) hem de T3’te (p<0.001) ve T2’ye göre T3’te CLMD (p<0.05) mesafesinin anlamlı düzeyde arttığı bulundu. T1’e göre hem T2 hem de T3’te ve T2’ye göre T3’te DC mesafesinin anlamlı düzeyde arttığı bulundu (p<0.001). CL1 mesafesi T3’te T1’e göre anlamlı düzeyde artmış bulundu (p<0.05). Sonuç: Maksiller posterior boşlukta premolar çekimine bağlı olarak artış izlenmiştir. Mandibular posterior boşlukta izlenen artışın maksiller posterior boşluktan daha az olduğu görülmüştür. Maksiller kesici dişlerde retraksiyon ve maksiller molarlarda meziyalizasyon hareketi izlenmiştir.
- 23 January 2023
- Published by Marmara University in Clinical and Experimental Health Sciences
- Vol. 14 (1) , 77-86
Artifacts Caused by Orthodontic Appliances on Magnetic Resonance Imaging: Awareness and Knowledge Level of Maxillofacial Radiologists and Orthodontists
Objective: Artifacts caused by orthodontic appliances on Magnetic Resonance Imaging (MRI) can affect the image quality and make diagnosis difficult. The debate is ongoing on whether orthodontic appliances should be removed to eliminate these problems. This study aimed to evaluate the awareness and knowledge level of dentists working in maxillofacial radiology and orthodontics about this subject through a questionnaire. Methods: The questionnaire consisted of 20 items and four parts: A) Personal information, B) Awareness level about the artifacts and complications caused by orthodontic appliances on MRI, C) Knowledge level about the factors related to artifacts and complications caused by orthodontic appliances on MRI, and D) Preventive approaches. The questionnaire was prepared on Google Forms and sent to potential participants via e-mail. The Chi-square (χ2) test was used for the statistical analysis of the variables. Results: Most participants were aware of the artifacts caused by orthodontic appliances on MRI (90.8%) (93.5% of maxillofacial radiologists and 88.5% of orthodontists) and thought that material type influenced the artifact formation (98.1%) (100% of maxillofacial radiologists and 96.3% of orthodontists). The percentage of participants with 1-5 years of experience who were aware of artifacts was less than those with more experience (p = .033). The percentage of orthodontists who referred patients for orthodontic appliance removal was higher than maxillofacial radiologists who requested the orthodontic appliance removal (93.5%>15%). Conclusion: Simultaneously increasing demands for both orthodontic treatment and MRI in the society cause concerns about the MRI image quality due to artifacts on images of the head and neck region. The main output of this study is that dentists working in orthodontics and maxillofacial radiology have a high awareness and knowledge about the artifacts and complications caused by orthodontic appliances on MRI.
- 23 January 2023
- Published by Marmara University in Clinical and Experimental Health Sciences
- Vol. 14 (1) , 77-86
Artifacts Caused by Orthodontic Appliances on Magnetic Resonance Imaging: Awareness and Knowledge Level of Maxillofacial Radiologists and Orthodontists
Objective: Artifacts caused by orthodontic appliances on Magnetic Resonance Imaging (MRI) can affect the image quality and make diagnosis difficult. The debate is ongoing on whether orthodontic appliances should be removed to eliminate these problems. This study aimed to evaluate the awareness and knowledge level of dentists working in maxillofacial radiology and orthodontics about this subject through a questionnaire. Methods: The questionnaire consisted of 20 items and four parts: A) Personal information, B) Awareness level about the artifacts and complications caused by orthodontic appliances on MRI, C) Knowledge level about the factors related to artifacts and complications caused by orthodontic appliances on MRI, and D) Preventive approaches. The questionnaire was prepared on Google Forms and sent to potential participants via e-mail. The Chi-square (χ2) test was used for the statistical analysis of the variables. Results: Most participants were aware of the artifacts caused by orthodontic appliances on MRI (90.8%) (93.5% of maxillofacial radiologists and 88.5% of orthodontists) and thought that material type influenced the artifact formation (98.1%) (100% of maxillofacial radiologists and 96.3% of orthodontists). The percentage of participants with 1-5 years of experience who were aware of artifacts was less than those with more experience (p = .033). The percentage of orthodontists who referred patients for orthodontic appliance removal was higher than maxillofacial radiologists who requested the orthodontic appliance removal (93.5%>15%). Conclusion: Simultaneously increasing demands for both orthodontic treatment and MRI in the society cause concerns about the MRI image quality due to artifacts on images of the head and neck region. The main output of this study is that dentists working in orthodontics and maxillofacial radiology have a high awareness and knowledge about the artifacts and complications caused by orthodontic appliances on MRI.
- 7 May 2022
- Published by Elsevier in American Journal of Orthodontics and Dentofacial Orthopedics
- Vol. 162 (3) , 374-385
Geometric morphometric analysis of the pharyngeal airway during treatment of Class III malocclusion
- 7 May 2022
- Published by Elsevier in American Journal of Orthodontics and Dentofacial Orthopedics
- Vol. 162 (3) , 374-385
Geometric morphometric analysis of the pharyngeal airway during treatment of Class III malocclusion
- 11 March 2021
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 34 (1) , 54-60
The Influence of Abnormalities in the Profile and Overjet on Psychological Well-Being
Esthetics,index of orthodontic treatment need,orthodontics,psychology
- 11 March 2021
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 34 (1) , 54-60
The Influence of Abnormalities in the Profile and Overjet on Psychological Well-Being
Esthetics,index of orthodontic treatment need,orthodontics,psychology
- 20 May 2020
- Published by Springer Nature in Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie
- Vol. 81 (4) , 249-257
Mandibular posterior space in class II division 1 and 2 malocclusion in various age groups
Purpose The aim of this study was to compare the mandibular posterior space in subjects with skeletal class II division 1 and division 2 malocclusions in two different age groups. Methods Pretreatment cephalometric radiographs of 160 patients from 9 to 13 years of age (n = 80) and 15 to 18 years of age (n = 80) with class II division 1 or division 2 malocclusion were used for the study. Equal numbers of male and female patients (n = 20) were included in the two age groups in each of the malocclusion groups. Eight linear and six angular measurements were taken for mandibular posterior space evaluation. The data obtained from the study were compared using the independent t-test. Results In the present study, the mandibular posterior space was greater in both malocclusion groups in subjects aged 15–18 years than in those aged 9–13 years (p < 0.05). The available posterior spaces behind the mandibular first molars were 4.4 mm and 6.3 mm in females (class II divisions 1 and 2, respectively) and 5.3 mm and 7 mm in males (class II divisions 1 and 2, respectively) in the 9‑ to 13-year-old age group. This space increased significantly by 6.9 mm (p < 0.001) and 3.2 mm (p < 0.01) in females (class II division 1 and 2, respectively) and 3.8 mm (p < 0.01) and 3 mm (p < 0.01) in males (class II division 1 and 2, respectively) in the 15- to 18-year-old age group. Conclusion Class II division 1 and division 2 malocclusions had similar and inadequate posterior space dimensions for the eruption of the third and an unknown portion of the second molars.
- 20 May 2020
- Published by Springer Nature in Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie
- Vol. 81 (4) , 249-257
Mandibular posterior space in class II division 1 and 2 malocclusion in various age groups
Purpose The aim of this study was to compare the mandibular posterior space in subjects with skeletal class II division 1 and division 2 malocclusions in two different age groups. Methods Pretreatment cephalometric radiographs of 160 patients from 9 to 13 years of age (n = 80) and 15 to 18 years of age (n = 80) with class II division 1 or division 2 malocclusion were used for the study. Equal numbers of male and female patients (n = 20) were included in the two age groups in each of the malocclusion groups. Eight linear and six angular measurements were taken for mandibular posterior space evaluation. The data obtained from the study were compared using the independent t-test. Results In the present study, the mandibular posterior space was greater in both malocclusion groups in subjects aged 15–18 years than in those aged 9–13 years (p < 0.05). The available posterior spaces behind the mandibular first molars were 4.4 mm and 6.3 mm in females (class II divisions 1 and 2, respectively) and 5.3 mm and 7 mm in males (class II divisions 1 and 2, respectively) in the 9‑ to 13-year-old age group. This space increased significantly by 6.9 mm (p < 0.001) and 3.2 mm (p < 0.01) in females (class II division 1 and 2, respectively) and 3.8 mm (p < 0.01) and 3 mm (p < 0.01) in males (class II division 1 and 2, respectively) in the 15- to 18-year-old age group. Conclusion Class II division 1 and division 2 malocclusions had similar and inadequate posterior space dimensions for the eruption of the third and an unknown portion of the second molars.
- 1 January 2020
- Published by MRE Press in Journal of Clinical Pediatric Dentistry
- Vol. 44 (6) , 459-463
Effects of Combined Rapid Maxillary Expansion and Facemask Therapy on the Mandibular Dental Arch in Mixed Dentition
Objective: The aim of this study was to evaluate changes in the mandibular dental arch and incisor alignment induced by combined bonded Rapid Maxillary Expansion (RME) and Face Mask (FM) therapy in the mixed dentition stage in which leeway space was used throughout the treatment. Study Design: This retrospective study evaluates pretreatment (T0) and posttreatment (T1) cephalometric radiographs and orthodontic models of 25 patients (mean age: 10.75 +/- 2.64), in mixed dentition, having skeletal Class 3 anomaly (ANB<0) with maxillary retrognatism (SNA=77.2 +/- 0.68) and bilateral posterior crossbite treated with bonded Hyrax RME-FM. Mean treatment duration was 10.4 months. Dental model measurements were performed using the 3Shape OrthoAnalyzer((TM)) 2013-1 program. Changes in the mandibular incisor and first molar positions were determined on cephalometric radiographs. Statistical evaluation was done with a paired t-test. Results: A significant increase of 1.2 mm was found in intermolar width (p<0.001) in the mandibular dental arch. There was a significant decrease (1.4 mm) (p<0.001) in arch depth and an increase in arch length discrepancy (1.7mm)(p<0.01). There was a significant increase (0.8mm) (p<0.05) in the incisors' irregularity score (LII). IMPA showed a significant decrease (p<0.05). Conclusion: Clinicians should be aware that mandibular crowding tends to increase during this type of combined therapy.
- 1 January 2020
- Published by MRE Press in Journal of Clinical Pediatric Dentistry
- Vol. 44 (6) , 459-463
Effects of Combined Rapid Maxillary Expansion and Facemask Therapy on the Mandibular Dental Arch in Mixed Dentition
Objective: The aim of this study was to evaluate changes in the mandibular dental arch and incisor alignment induced by combined bonded Rapid Maxillary Expansion (RME) and Face Mask (FM) therapy in the mixed dentition stage in which leeway space was used throughout the treatment. Study Design: This retrospective study evaluates pretreatment (T0) and posttreatment (T1) cephalometric radiographs and orthodontic models of 25 patients (mean age: 10.75 +/- 2.64), in mixed dentition, having skeletal Class 3 anomaly (ANB<0) with maxillary retrognatism (SNA=77.2 +/- 0.68) and bilateral posterior crossbite treated with bonded Hyrax RME-FM. Mean treatment duration was 10.4 months. Dental model measurements were performed using the 3Shape OrthoAnalyzer((TM)) 2013-1 program. Changes in the mandibular incisor and first molar positions were determined on cephalometric radiographs. Statistical evaluation was done with a paired t-test. Results: A significant increase of 1.2 mm was found in intermolar width (p<0.001) in the mandibular dental arch. There was a significant decrease (1.4 mm) (p<0.001) in arch depth and an increase in arch length discrepancy (1.7mm)(p<0.01). There was a significant increase (0.8mm) (p<0.05) in the incisors' irregularity score (LII). IMPA showed a significant decrease (p<0.05). Conclusion: Clinicians should be aware that mandibular crowding tends to increase during this type of combined therapy.
- Open Access
- 14 August 2018
- Published by Acta Odontologica Turcica in Acta Odontologica Turcica
- Vol. 35 (3) , 62-68
Long term results of double plate appliance and facemask combination in the treatment of Class III malocclusion: cephalometric analysis
Objective: The aim of this study was to evaluate the long term results of double plate appliance and facemask combination (DPA-FM) in treating Class III malocclusions when growth potential of the patients was close to cease or ceased. Materials and Method: The material consisted of the pretreatment (T1), posttreatment (T2), and long term (T3) lateral cephalometric and the hand-wrist radiographs of 13 patients (5 females, 8 males; mean chronological age: 11.1±1.40 years) with skeletal and dental Class III malocclusion treated with DPA-FM combination. The mean DPA-FM treatment time was 10.8±1.88 months. The hand-wrist growth and developmental stages were MP3u or Ru at T3. The mean follow-up period was 5.0±1.98 years. Friedman’s Two-Way ANOVA and Wilcoxon signed-rank tests were used to evaluate the treatment (T2-T1), follow-up (T3-T2) and overall (T3-T1) results. Results: With the DPA-FM therapy, SNA and ANB angles increased (p<0.001); however, no significant differences were found in these parameters during T3-T2 period [p=0.655 (SNA), p=0.805 (ANB)]. Significant increases were found in N┴FH-A distance during the treatment (p<0.01) and follow-up (p<0.05) periods. Molar relation showed significant increases with DPA-FM in both the treatment and overall period (p<0.001). Overjet increased significantly during the treatment (p<0.001), follow-up (p<0.05), and overall (p<0.001) periods. Significant protrusion of upper incisors (U1/NA) was observed during the treatment, follow-up, and overall periods (p<0.05). U6/PP and L6/MP angles did not change during the DPA-FM treatment; however, these parameters decreased significantly during the follow-up and overall periods (p<0.05). Conclusion: In the treatment of Class III malocclusion, the DPA-FM appliance was effective. The skeletal and dental sagittal changes achieved by orthopedic treatment were maintained in the long term.
- 14 August 2018
- Published by Acta Odontologica Turcica in Acta Odontologica Turcica
- Vol. 35 (3) , 62-68
Open AccessLong term results of double plate appliance and facemask combination in the treatment of Class III malocclusion: cephalometric analysis
Objective: The aim of this study was to evaluate the long term results of double plate appliance and facemask combination (DPA-FM) in treating Class III malocclusions when growth potential of the patients was close to cease or ceased. Materials and Method: The material consisted of the pretreatment (T1), posttreatment (T2), and long term (T3) lateral cephalometric and the hand-wrist radiographs of 13 patients (5 females, 8 males; mean chronological age: 11.1±1.40 years) with skeletal and dental Class III malocclusion treated with DPA-FM combination. The mean DPA-FM treatment time was 10.8±1.88 months. The hand-wrist growth and developmental stages were MP3u or Ru at T3. The mean follow-up period was 5.0±1.98 years. Friedman’s Two-Way ANOVA and Wilcoxon signed-rank tests were used to evaluate the treatment (T2-T1), follow-up (T3-T2) and overall (T3-T1) results. Results: With the DPA-FM therapy, SNA and ANB angles increased (p<0.001); however, no significant differences were found in these parameters during T3-T2 period [p=0.655 (SNA), p=0.805 (ANB)]. Significant increases were found in N┴FH-A distance during the treatment (p<0.01) and follow-up (p<0.05) periods. Molar relation showed significant increases with DPA-FM in both the treatment and overall period (p<0.001). Overjet increased significantly during the treatment (p<0.001), follow-up (p<0.05), and overall (p<0.001) periods. Significant protrusion of upper incisors (U1/NA) was observed during the treatment, follow-up, and overall periods (p<0.05). U6/PP and L6/MP angles did not change during the DPA-FM treatment; however, these parameters decreased significantly during the follow-up and overall periods (p<0.05). Conclusion: In the treatment of Class III malocclusion, the DPA-FM appliance was effective. The skeletal and dental sagittal changes achieved by orthopedic treatment were maintained in the long term.