Alexandru Dandocsi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexandru Dandocsi has a total of 215 co-authors. Here are the top co-authors by number of shared publications:
Christian Retscher
24 shared publicationsAnton Lopatin
14 shared publicationsArthur Lehner
14 shared publications- Cheng Chen
Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China
14 shared publications Chong Li
14 shared publicationsChristian Matar
14 shared publications
Latest Publications
- Open Access
- 24 September 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (19) , 3296
Synergetic Multi-Instrument and Modelling Approach for the Detailed Characterisation of Rapid Transitions Between Contrasting Aerosol Regimes
This study demonstrates a synergetic multi-instrument and modelling approach for the rigorous characterisation of rapid aerosol regime transitions, applied to an exceptional atmospheric event over the RADO-Bucharest station during the July 2023 “Cerberus” heatwave. By anchoring our analysis in high-power Raman lidar profiling, integrated with sun-photometry (GRASP inversions), near-surface chemical speciation (ACSM, Aethalometer), and Lagrangian transport models (FLEXPART, HYSPLIT), we quantitatively resolve the vertical dynamics of shifting aerosol plumes. We identify a definitive two-phase evolution: a regional biomass-burning fine-mode plume advected at 2 km altitude on 12 July, abruptly displaced by a coarse-mode Saharan mineral dust intrusion at 3 km altitude on 13 July. Convective planetary boundary layer (PBL) growth drove the daytime entrainment of these lofted layers, while high-resolution Doppler wind lidar measurements confirm that nocturnal subsidence provided the mechanical forcing necessary to entrain these lofted layers during the night into the planetary boundary layer, driving near-surface severe air quality degradation. Furthermore, parameterised scenario demonstrations indicate that these aerosol layers influenced the subsequent cloud microphysical evolution. Organic smoke aerosols acted as cloud stabilisers, with simulated high droplet concentrations suppressing collision–coalescence and locking the hydrometeor population in a non-precipitating liquid state (median reff_liq ∼ 5.0 ± 1.2 μm). Conversely, the subsequent mineral dust intrusion provided potent ice nucleating particles, triggering the Wegener–Bergeron–Findeisen process. This catalysed a rapid phase transition into a deep glaciated system (reff_ice ∼ 49.7 ± 12.5 μm) and established a bimodal melting layer that culminated in widespread washout. This work underscores that high-resolution vertical profiling, specifically via Raman lidar, is indispensable for resolving transient atmospheric events and parameterising aerosol-mediated modifications to the regional hydrological cycle.
- 24 September 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (19) , 3296
Open AccessSynergetic Multi-Instrument and Modelling Approach for the Detailed Characterisation of Rapid Transitions Between Contrasting Aerosol Regimes
This study demonstrates a synergetic multi-instrument and modelling approach for the rigorous characterisation of rapid aerosol regime transitions, applied to an exceptional atmospheric event over the RADO-Bucharest station during the July 2023 “Cerberus” heatwave. By anchoring our analysis in high-power Raman lidar profiling, integrated with sun-photometry (GRASP inversions), near-surface chemical speciation (ACSM, Aethalometer), and Lagrangian transport models (FLEXPART, HYSPLIT), we quantitatively resolve the vertical dynamics of shifting aerosol plumes. We identify a definitive two-phase evolution: a regional biomass-burning fine-mode plume advected at 2 km altitude on 12 July, abruptly displaced by a coarse-mode Saharan mineral dust intrusion at 3 km altitude on 13 July. Convective planetary boundary layer (PBL) growth drove the daytime entrainment of these lofted layers, while high-resolution Doppler wind lidar measurements confirm that nocturnal subsidence provided the mechanical forcing necessary to entrain these lofted layers during the night into the planetary boundary layer, driving near-surface severe air quality degradation. Furthermore, parameterised scenario demonstrations indicate that these aerosol layers influenced the subsequent cloud microphysical evolution. Organic smoke aerosols acted as cloud stabilisers, with simulated high droplet concentrations suppressing collision–coalescence and locking the hydrometeor population in a non-precipitating liquid state (median reff_liq ∼ 5.0 ± 1.2 μm). Conversely, the subsequent mineral dust intrusion provided potent ice nucleating particles, triggering the Wegener–Bergeron–Findeisen process. This catalysed a rapid phase transition into a deep glaciated system (reff_ice ∼ 49.7 ± 12.5 μm) and established a bimodal melting layer that culminated in widespread washout. This work underscores that high-resolution vertical profiling, specifically via Raman lidar, is indispensable for resolving transient atmospheric events and parameterising aerosol-mediated modifications to the regional hydrological cycle.
- Open Access
- 12 September 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (18) , 3143
Multi-Instrumental Evidence of the 2025 Absorbing Aerosol Perturbation at the RADO-Bucharest Observatory
This paper presents a multi-parameter characterisation of the atmospheric composition at the RADO-Bucharest observatory, a regional WMO-GAW and ACTRIS facility in southeastern Europe, by anchoring recent observations within a multi-annual baseline (2015–2024). This paper utilises data from multi-wavelength active remote sensing, high-resolution near-surface speciation, and modelling to evaluate complex urban and transboundary processes across different aerosol and clouds regimes. The year 2025 was marked by an atmospheric perturbation, which was characterised by a quantifiable departure from the decadal climatology. Using Z-score analysis, this perturbation was identified as a seasonal decoupling: an atypical reversal in the vertical particle-size distribution occurred in the free troposphere between July and October, while a transition toward a high-absorption aerosol regime was recorded near the surface during the winter months. These shifts are quantified by a significant drop in the columnar Single Scattering Albedo and a systemic increase in high-troposphere Lidar ratios exceeding 70 ± 12 sr, indicating the presence of advected combustion products aloft. At the surface level, chemical speciation measurements recorded an overall increase in wintertime particulate mass concentrations alongside elevated levels of More-Oxidized Oxygenated Organic Aerosol (MOOOA) compared to previous years, reflecting an intensified accumulation of aged, processed emissions during the January–February period. Furthermore, this paper documents cloud vertical structure and phase occurrence, highlighting a persistent seasonal stratification. The application of unified inversion frameworks is demonstrated through case studies of smoke and mineral dust, applying the Generalized Retrieval of Atmosphere and Surface Properties (GRASP) algorithm to retrieve vertically distributed aerosol microphysics through lidar–photometer integration. Maintained under rigorous quality assurance protocols, these results demonstrate the value of continuous, multi-instrumental profiling to quantify transboundary perturbations and improve regional energy budget representations.
- 12 September 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (18) , 3143
Open AccessMulti-Instrumental Evidence of the 2025 Absorbing Aerosol Perturbation at the RADO-Bucharest Observatory
This paper presents a multi-parameter characterisation of the atmospheric composition at the RADO-Bucharest observatory, a regional WMO-GAW and ACTRIS facility in southeastern Europe, by anchoring recent observations within a multi-annual baseline (2015–2024). This paper utilises data from multi-wavelength active remote sensing, high-resolution near-surface speciation, and modelling to evaluate complex urban and transboundary processes across different aerosol and clouds regimes. The year 2025 was marked by an atmospheric perturbation, which was characterised by a quantifiable departure from the decadal climatology. Using Z-score analysis, this perturbation was identified as a seasonal decoupling: an atypical reversal in the vertical particle-size distribution occurred in the free troposphere between July and October, while a transition toward a high-absorption aerosol regime was recorded near the surface during the winter months. These shifts are quantified by a significant drop in the columnar Single Scattering Albedo and a systemic increase in high-troposphere Lidar ratios exceeding 70 ± 12 sr, indicating the presence of advected combustion products aloft. At the surface level, chemical speciation measurements recorded an overall increase in wintertime particulate mass concentrations alongside elevated levels of More-Oxidized Oxygenated Organic Aerosol (MOOOA) compared to previous years, reflecting an intensified accumulation of aged, processed emissions during the January–February period. Furthermore, this paper documents cloud vertical structure and phase occurrence, highlighting a persistent seasonal stratification. The application of unified inversion frameworks is demonstrated through case studies of smoke and mineral dust, applying the Generalized Retrieval of Atmosphere and Surface Properties (GRASP) algorithm to retrieve vertically distributed aerosol microphysics through lidar–photometer integration. Maintained under rigorous quality assurance protocols, these results demonstrate the value of continuous, multi-instrumental profiling to quantify transboundary perturbations and improve regional energy budget representations.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Analysis of the temporal variation of the SYREMIS/GRASP synergetic products
The spatiotemporal evolution of aerosols is highly dynamic, driven by the diurnal motion of boundary layers, meteorological conditions, and transient emissions. Consequently, monitoring these diurnal cycles requires a synergistic approach utilizing multiple satellite platforms to ensure consistent, sub-daily revisit capabilities over target geographical regions. This study investigates the SYREMIS/GRASP approach, which synergistically inverts Level-1 data from LEO+LEO (Sentinel-3/OLCI, Sentinel-5P/TROPOMI) and LEO+GEO (LEO+LEO synergy with Himawari-8/AHI) sensors to resolve aerosol diurnal cycles. By exploiting the expanded information content from combined spectral and multi-angular measurements, we achieve precise high-temporal-resolution retrievals of AOD, Angstrom Exponent, and Single Scattering Albedo. Validation against AERONET and comparison with the XAERDT merged product suite (MODIS+VIIRS+AHI) confirm the method's superior performance. Analysis of 2019 dust and smoke events demonstrates the algorithm’s robustness in monitoring dynamic pollution episodes on regional to global scales.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessAnalysis of the temporal variation of the SYREMIS/GRASP synergetic products
The spatiotemporal evolution of aerosols is highly dynamic, driven by the diurnal motion of boundary layers, meteorological conditions, and transient emissions. Consequently, monitoring these diurnal cycles requires a synergistic approach utilizing multiple satellite platforms to ensure consistent, sub-daily revisit capabilities over target geographical regions. This study investigates the SYREMIS/GRASP approach, which synergistically inverts Level-1 data from LEO+LEO (Sentinel-3/OLCI, Sentinel-5P/TROPOMI) and LEO+GEO (LEO+LEO synergy with Himawari-8/AHI) sensors to resolve aerosol diurnal cycles. By exploiting the expanded information content from combined spectral and multi-angular measurements, we achieve precise high-temporal-resolution retrievals of AOD, Angstrom Exponent, and Single Scattering Albedo. Validation against AERONET and comparison with the XAERDT merged product suite (MODIS+VIIRS+AHI) confirm the method's superior performance. Analysis of 2019 dust and smoke events demonstrates the algorithm’s robustness in monitoring dynamic pollution episodes on regional to global scales.
- Open Access
- 17 February 2026
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 19 (4) , 1179-1199
Examining the characteristics of aerosols: a statistical analysis based on a decade of lidar and photometer observations at the Eastern border of ACTRIS
A decade-long (2015–2024) analysis of aerosol properties was conducted at RADO (Romanian Atmospheric 3D Observatory)-Bucharest station in Romania, a key atmospheric observational site at the Eastern border of the Aerosol, Clouds and Trace gases Research Infrastructure (ACTRIS). This study aims to characterize the optical and microphysical properties of aerosols, classify predominant aerosol types, and investigate their seasonal variability and transport pathways based on long-term multiwavelength Raman lidar and sun/sky/lunar photometer measurements. Results indicate a dominance of fine-mode aerosols, with an average Aerosol Optical Depth (AOD) of ∼ 0.2 and Ångström Exponent (AE) values between 1.5 and 2.0, highlighting pollution-driven aerosol regimes. Seasonal variations were observed, with continental aerosols prevailing in winter, dust transport peaking in spring (altitudes of 2–8 km), and biomass-burning aerosols increasing during summer. Analysis of 408 aerosol layers using the NATALI (Neural network Aerosol Typing Algorithm based on LIdar data) identified complex aerosol mixtures, with 63 high-resolution cases revealing a predominance of “dust polluted” and “continental smoke” types. In the lower troposphere, the extinction-related Ångström exponent shows a narrow mono-modal distribution with the peak at 0.9, indicating predominantly medium-sized particles, whereas in the high troposphere it becomes bi-modal, reflecting alternating occurrences of small and large particles. Lidar ratio values have a distribution peak at around 48–49 sr in both altitude regions, but their spread is much wider in the lower troposphere – revealing frequent layers of highly absorbing aerosols – while lofted layers in the high troposphere exhibit a narrower range typical of moderately absorbing particles. Distinct differences between fresh and aged biomass-burning aerosols (smoke) are identified through their altitude, depolarization, Ångström exponent, and lidar-ratio characteristics, demonstrating microphysical change during transport. FLEXPART (FLEXible PARTicle dispersion model) retro-plume simulations provided insights into aerosol source regions and transport patterns showing contributions from local emissions, long-range transported desert dust, and biomass burning events from Europe and North America. These findings emphasize the persistent influence of regional pollution and transported aerosols on air quality and climate. The integration of ground-based remote sensing and advanced retrieval algorithms like NATALI provides a robust framework for aerosol characterization, enhancing climate models and air quality assessments.
- 17 February 2026
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 19 (4) , 1179-1199
Open AccessExamining the characteristics of aerosols: a statistical analysis based on a decade of lidar and photometer observations at the Eastern border of ACTRIS
A decade-long (2015–2024) analysis of aerosol properties was conducted at RADO (Romanian Atmospheric 3D Observatory)-Bucharest station in Romania, a key atmospheric observational site at the Eastern border of the Aerosol, Clouds and Trace gases Research Infrastructure (ACTRIS). This study aims to characterize the optical and microphysical properties of aerosols, classify predominant aerosol types, and investigate their seasonal variability and transport pathways based on long-term multiwavelength Raman lidar and sun/sky/lunar photometer measurements. Results indicate a dominance of fine-mode aerosols, with an average Aerosol Optical Depth (AOD) of ∼ 0.2 and Ångström Exponent (AE) values between 1.5 and 2.0, highlighting pollution-driven aerosol regimes. Seasonal variations were observed, with continental aerosols prevailing in winter, dust transport peaking in spring (altitudes of 2–8 km), and biomass-burning aerosols increasing during summer. Analysis of 408 aerosol layers using the NATALI (Neural network Aerosol Typing Algorithm based on LIdar data) identified complex aerosol mixtures, with 63 high-resolution cases revealing a predominance of “dust polluted” and “continental smoke” types. In the lower troposphere, the extinction-related Ångström exponent shows a narrow mono-modal distribution with the peak at 0.9, indicating predominantly medium-sized particles, whereas in the high troposphere it becomes bi-modal, reflecting alternating occurrences of small and large particles. Lidar ratio values have a distribution peak at around 48–49 sr in both altitude regions, but their spread is much wider in the lower troposphere – revealing frequent layers of highly absorbing aerosols – while lofted layers in the high troposphere exhibit a narrower range typical of moderately absorbing particles. Distinct differences between fresh and aged biomass-burning aerosols (smoke) are identified through their altitude, depolarization, Ångström exponent, and lidar-ratio characteristics, demonstrating microphysical change during transport. FLEXPART (FLEXible PARTicle dispersion model) retro-plume simulations provided insights into aerosol source regions and transport patterns showing contributions from local emissions, long-range transported desert dust, and biomass burning events from Europe and North America. These findings emphasize the persistent influence of regional pollution and transported aerosols on air quality and climate. The integration of ground-based remote sensing and advanced retrieval algorithms like NATALI provides a robust framework for aerosol characterization, enhancing climate models and air quality assessments.
- Open Access
- 17 December 2025
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 18 (24) , 7679-7716
Synergetic retrieval from multi-mission spaceborne measurements for enhanced aerosol and surface characterization
Atmospheric aerosol is one of the main drivers of climate change. Currently, a number of different satellites in Earth orbit are dedicated to aerosol studies. Due to limited information content, the primary aerosol product of most satellite missions is AOD (Aerosol Optical Depth), while the accuracy of aerosol size and type retrieval from spaceborne remote sensing still requires improvement. Combining measurements from different satellites increases their information content and, therefore, can provide new possibilities for retrieving an extended set of both aerosol and surface properties. In this paper, we present the physical basis and concept of the recently developed synergetic approach for aerosol and surface characterization using diverse spaceborne measurements (hereinafter SYREMIS (SYnergetic REtrieval from Multi-MISsion instruments) approach). The approach was implemented in the GRASP (Generalized Retrieval of Atmosphere and Surface Properties) algorithm and has been tested on two types of synergetic measurements: (i) synergy of polar-orbiting satellites (LEO + LEO synergy combining Sentinel-5P/TROPOMI, Sentinel-3A/OLCI, and Sentinel-3B/OLCI instruments), (ii) synergy of polar-orbiting and geostationary satellites (LEO + GEO synergy based on Sentinel-5P/TROPOMI, Sentinel-3A/OLCI, Sentinel-3B/OLCI, and Himawari-8/AHI instruments). On the one hand, such a synergetic satellite constellation extends the spectral range of the measurements. On the other hand, it provides unprecedented global spatial coverage with high temporal resolution, which is crucial for a number of climate studies. It is shown that the SYREMIS/GRASP approach facilitates the transfer of information content from instruments with richer information content to those with lower one. This results in substantial enhancements in aerosol and surface characterization for all instruments within the synergy.
- 17 December 2025
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 18 (24) , 7679-7716
Open AccessSynergetic retrieval from multi-mission spaceborne measurements for enhanced aerosol and surface characterization
Atmospheric aerosol is one of the main drivers of climate change. Currently, a number of different satellites in Earth orbit are dedicated to aerosol studies. Due to limited information content, the primary aerosol product of most satellite missions is AOD (Aerosol Optical Depth), while the accuracy of aerosol size and type retrieval from spaceborne remote sensing still requires improvement. Combining measurements from different satellites increases their information content and, therefore, can provide new possibilities for retrieving an extended set of both aerosol and surface properties. In this paper, we present the physical basis and concept of the recently developed synergetic approach for aerosol and surface characterization using diverse spaceborne measurements (hereinafter SYREMIS (SYnergetic REtrieval from Multi-MISsion instruments) approach). The approach was implemented in the GRASP (Generalized Retrieval of Atmosphere and Surface Properties) algorithm and has been tested on two types of synergetic measurements: (i) synergy of polar-orbiting satellites (LEO + LEO synergy combining Sentinel-5P/TROPOMI, Sentinel-3A/OLCI, and Sentinel-3B/OLCI instruments), (ii) synergy of polar-orbiting and geostationary satellites (LEO + GEO synergy based on Sentinel-5P/TROPOMI, Sentinel-3A/OLCI, Sentinel-3B/OLCI, and Himawari-8/AHI instruments). On the one hand, such a synergetic satellite constellation extends the spectral range of the measurements. On the other hand, it provides unprecedented global spatial coverage with high temporal resolution, which is crucial for a number of climate studies. It is shown that the SYREMIS/GRASP approach facilitates the transfer of information content from instruments with richer information content to those with lower one. This results in substantial enhancements in aerosol and surface characterization for all instruments within the synergy.
- Open Access
- 30 November 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-24
Reply on RC2
A decade-long (2015–2024) analysis of aerosol properties was conducted at RADO-Bucharest station in Romania a key atmospheric observational site at the Eastern border of the Aerosol, Clouds and Trace gases Research Infra-structure (ACTRIS). This study aims to characterize the optical and microphysical properties of aerosols, classify predominant aerosol types, and investigate their seasonal variability and transport pathways based on long-term multiwavelength Raman lidar and sun/sky/lunar photometer measurements. Results indicate a dominance of fine-mode aerosols, with an average Aerosol Optical Depth (AOD) of ~0.2 and Ӓngström Exponent (AE) values between 1.5–2.0, highlighting pollution-driven aerosol regimes. Seasonal variations were observed, with continental aerosols prevailing in winter, dust transport peaking in spring (altitudes of 2–8 km), and biomass-burning aerosols increasing during summer. Marine aerosols were occasionally detected at ~2 km altitude, often mixed with dust. Analysis of 408 aerosol layers using the NATALI (Neural network Aerosol Typing Algorithm based on LIdar data) identified complex aerosol mixtures, with 63 high-resolution cases revealing a predominance of “dust polluted” and “continental smoke” types. Lidar-derived extinction Ӓngström coefficients (median ~0.9 in the low troposphere) and lidar ratios (~48 sr in the low troposphere, ~49 sr in the high troposphere) suggest varying optical properties linked to aerosol composition and absorption characteristics. FLEXPART (FLEXible PARTicle dispersion model) retro-plume simulations provided insights into aerosol source regions and transport patterns showing contributions from local emissions, long-range transported desert dust, and biomass burning events from Europe and North America. These findings emphasize the persistent influence of regional pollution and transported aerosols on air quality and climate. The integration of ground-based remote sensing and advanced retrieval algorithms like NATALI provides a robust framework for aerosol characterization, enhancing climate models and air quality assessments.
- 30 November 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-24
Open AccessReply on RC2
A decade-long (2015–2024) analysis of aerosol properties was conducted at RADO-Bucharest station in Romania a key atmospheric observational site at the Eastern border of the Aerosol, Clouds and Trace gases Research Infra-structure (ACTRIS). This study aims to characterize the optical and microphysical properties of aerosols, classify predominant aerosol types, and investigate their seasonal variability and transport pathways based on long-term multiwavelength Raman lidar and sun/sky/lunar photometer measurements. Results indicate a dominance of fine-mode aerosols, with an average Aerosol Optical Depth (AOD) of ~0.2 and Ӓngström Exponent (AE) values between 1.5–2.0, highlighting pollution-driven aerosol regimes. Seasonal variations were observed, with continental aerosols prevailing in winter, dust transport peaking in spring (altitudes of 2–8 km), and biomass-burning aerosols increasing during summer. Marine aerosols were occasionally detected at ~2 km altitude, often mixed with dust. Analysis of 408 aerosol layers using the NATALI (Neural network Aerosol Typing Algorithm based on LIdar data) identified complex aerosol mixtures, with 63 high-resolution cases revealing a predominance of “dust polluted” and “continental smoke” types. Lidar-derived extinction Ӓngström coefficients (median ~0.9 in the low troposphere) and lidar ratios (~48 sr in the low troposphere, ~49 sr in the high troposphere) suggest varying optical properties linked to aerosol composition and absorption characteristics. FLEXPART (FLEXible PARTicle dispersion model) retro-plume simulations provided insights into aerosol source regions and transport patterns showing contributions from local emissions, long-range transported desert dust, and biomass burning events from Europe and North America. These findings emphasize the persistent influence of regional pollution and transported aerosols on air quality and climate. The integration of ground-based remote sensing and advanced retrieval algorithms like NATALI provides a robust framework for aerosol characterization, enhancing climate models and air quality assessments.
- Open Access
- 30 November 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-24
Reply on RC1
A decade-long (2015–2024) analysis of aerosol properties was conducted at RADO-Bucharest station in Romania a key atmospheric observational site at the Eastern border of the Aerosol, Clouds and Trace gases Research Infra-structure (ACTRIS). This study aims to characterize the optical and microphysical properties of aerosols, classify predominant aerosol types, and investigate their seasonal variability and transport pathways based on long-term multiwavelength Raman lidar and sun/sky/lunar photometer measurements. Results indicate a dominance of fine-mode aerosols, with an average Aerosol Optical Depth (AOD) of ~0.2 and Ӓngström Exponent (AE) values between 1.5–2.0, highlighting pollution-driven aerosol regimes. Seasonal variations were observed, with continental aerosols prevailing in winter, dust transport peaking in spring (altitudes of 2–8 km), and biomass-burning aerosols increasing during summer. Marine aerosols were occasionally detected at ~2 km altitude, often mixed with dust. Analysis of 408 aerosol layers using the NATALI (Neural network Aerosol Typing Algorithm based on LIdar data) identified complex aerosol mixtures, with 63 high-resolution cases revealing a predominance of “dust polluted” and “continental smoke” types. Lidar-derived extinction Ӓngström coefficients (median ~0.9 in the low troposphere) and lidar ratios (~48 sr in the low troposphere, ~49 sr in the high troposphere) suggest varying optical properties linked to aerosol composition and absorption characteristics. FLEXPART (FLEXible PARTicle dispersion model) retro-plume simulations provided insights into aerosol source regions and transport patterns showing contributions from local emissions, long-range transported desert dust, and biomass burning events from Europe and North America. These findings emphasize the persistent influence of regional pollution and transported aerosols on air quality and climate. The integration of ground-based remote sensing and advanced retrieval algorithms like NATALI provides a robust framework for aerosol characterization, enhancing climate models and air quality assessments.
- 30 November 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-24
Open AccessReply on RC1
A decade-long (2015–2024) analysis of aerosol properties was conducted at RADO-Bucharest station in Romania a key atmospheric observational site at the Eastern border of the Aerosol, Clouds and Trace gases Research Infra-structure (ACTRIS). This study aims to characterize the optical and microphysical properties of aerosols, classify predominant aerosol types, and investigate their seasonal variability and transport pathways based on long-term multiwavelength Raman lidar and sun/sky/lunar photometer measurements. Results indicate a dominance of fine-mode aerosols, with an average Aerosol Optical Depth (AOD) of ~0.2 and Ӓngström Exponent (AE) values between 1.5–2.0, highlighting pollution-driven aerosol regimes. Seasonal variations were observed, with continental aerosols prevailing in winter, dust transport peaking in spring (altitudes of 2–8 km), and biomass-burning aerosols increasing during summer. Marine aerosols were occasionally detected at ~2 km altitude, often mixed with dust. Analysis of 408 aerosol layers using the NATALI (Neural network Aerosol Typing Algorithm based on LIdar data) identified complex aerosol mixtures, with 63 high-resolution cases revealing a predominance of “dust polluted” and “continental smoke” types. Lidar-derived extinction Ӓngström coefficients (median ~0.9 in the low troposphere) and lidar ratios (~48 sr in the low troposphere, ~49 sr in the high troposphere) suggest varying optical properties linked to aerosol composition and absorption characteristics. FLEXPART (FLEXible PARTicle dispersion model) retro-plume simulations provided insights into aerosol source regions and transport patterns showing contributions from local emissions, long-range transported desert dust, and biomass burning events from Europe and North America. These findings emphasize the persistent influence of regional pollution and transported aerosols on air quality and climate. The integration of ground-based remote sensing and advanced retrieval algorithms like NATALI provides a robust framework for aerosol characterization, enhancing climate models and air quality assessments.
- Open Access
- 29 August 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-32
Reply on RC4
Atmospheric aerosol is one of the main drivers of climate change. At present time there are a number of different satellites on Earth orbit dedicated to aerosol studies. Due to limited information content, the main aerosol products of the most of satellite missions is AOD (Aerosol Optical Depth) while the accuracy of aerosol size and type retrieval from spaceborne remote sensing still requires essential improvement. The combination of measurements from different satellites essentially increases their information content and, therefore, can provide new possibilities for retrieval of extended set of both aerosol and surface properties. A generalized synergetic approach for aerosol and surface characterization from diverse spaceborne measurements was developed on the basis of GRASP (Generalized Retrieval of Atmosphere and Surface Properties) algorithm (SYREMIS/GRASP approach). The concept was applied and tested on two types of synergetic measurements: (i) synergy from polar orbiting satellites (LEO+LEO synergy), (ii) synergy from polar orbiting and geostationary satellites (LEO+GEO synergy). On one hand such synergetic constellation extends the spectral range of the measurements. On the other hand, it provides unprecedented global spatial coverage with high temporal resolution, which is crucial for number of climate studies. In this paper we discuss the physical basis and concept of the LEO+LEO and LEO+GEO synergies used in GRASP retrieval and demonstrate that SYREMIS/GRASP approach allows the transition of information content from the instruments with the richest information content to the instruments with lower one. This results in the substantial enhancements in aerosol and surface characterizations for all instruments from the synergy.
- 29 August 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-32
Open AccessReply on RC4
Atmospheric aerosol is one of the main drivers of climate change. At present time there are a number of different satellites on Earth orbit dedicated to aerosol studies. Due to limited information content, the main aerosol products of the most of satellite missions is AOD (Aerosol Optical Depth) while the accuracy of aerosol size and type retrieval from spaceborne remote sensing still requires essential improvement. The combination of measurements from different satellites essentially increases their information content and, therefore, can provide new possibilities for retrieval of extended set of both aerosol and surface properties. A generalized synergetic approach for aerosol and surface characterization from diverse spaceborne measurements was developed on the basis of GRASP (Generalized Retrieval of Atmosphere and Surface Properties) algorithm (SYREMIS/GRASP approach). The concept was applied and tested on two types of synergetic measurements: (i) synergy from polar orbiting satellites (LEO+LEO synergy), (ii) synergy from polar orbiting and geostationary satellites (LEO+GEO synergy). On one hand such synergetic constellation extends the spectral range of the measurements. On the other hand, it provides unprecedented global spatial coverage with high temporal resolution, which is crucial for number of climate studies. In this paper we discuss the physical basis and concept of the LEO+LEO and LEO+GEO synergies used in GRASP retrieval and demonstrate that SYREMIS/GRASP approach allows the transition of information content from the instruments with the richest information content to the instruments with lower one. This results in the substantial enhancements in aerosol and surface characterizations for all instruments from the synergy.
- Open Access
- 29 August 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-32
Reply on RC1
Atmospheric aerosol is one of the main drivers of climate change. At present time there are a number of different satellites on Earth orbit dedicated to aerosol studies. Due to limited information content, the main aerosol products of the most of satellite missions is AOD (Aerosol Optical Depth) while the accuracy of aerosol size and type retrieval from spaceborne remote sensing still requires essential improvement. The combination of measurements from different satellites essentially increases their information content and, therefore, can provide new possibilities for retrieval of extended set of both aerosol and surface properties. A generalized synergetic approach for aerosol and surface characterization from diverse spaceborne measurements was developed on the basis of GRASP (Generalized Retrieval of Atmosphere and Surface Properties) algorithm (SYREMIS/GRASP approach). The concept was applied and tested on two types of synergetic measurements: (i) synergy from polar orbiting satellites (LEO+LEO synergy), (ii) synergy from polar orbiting and geostationary satellites (LEO+GEO synergy). On one hand such synergetic constellation extends the spectral range of the measurements. On the other hand, it provides unprecedented global spatial coverage with high temporal resolution, which is crucial for number of climate studies. In this paper we discuss the physical basis and concept of the LEO+LEO and LEO+GEO synergies used in GRASP retrieval and demonstrate that SYREMIS/GRASP approach allows the transition of information content from the instruments with the richest information content to the instruments with lower one. This results in the substantial enhancements in aerosol and surface characterizations for all instruments from the synergy.
- 29 August 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-32
Open AccessReply on RC1
Atmospheric aerosol is one of the main drivers of climate change. At present time there are a number of different satellites on Earth orbit dedicated to aerosol studies. Due to limited information content, the main aerosol products of the most of satellite missions is AOD (Aerosol Optical Depth) while the accuracy of aerosol size and type retrieval from spaceborne remote sensing still requires essential improvement. The combination of measurements from different satellites essentially increases their information content and, therefore, can provide new possibilities for retrieval of extended set of both aerosol and surface properties. A generalized synergetic approach for aerosol and surface characterization from diverse spaceborne measurements was developed on the basis of GRASP (Generalized Retrieval of Atmosphere and Surface Properties) algorithm (SYREMIS/GRASP approach). The concept was applied and tested on two types of synergetic measurements: (i) synergy from polar orbiting satellites (LEO+LEO synergy), (ii) synergy from polar orbiting and geostationary satellites (LEO+GEO synergy). On one hand such synergetic constellation extends the spectral range of the measurements. On the other hand, it provides unprecedented global spatial coverage with high temporal resolution, which is crucial for number of climate studies. In this paper we discuss the physical basis and concept of the LEO+LEO and LEO+GEO synergies used in GRASP retrieval and demonstrate that SYREMIS/GRASP approach allows the transition of information content from the instruments with the richest information content to the instruments with lower one. This results in the substantial enhancements in aerosol and surface characterizations for all instruments from the synergy.
- Open Access
- 29 August 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-32
Reply on RC4
Atmospheric aerosol is one of the main drivers of climate change. At present time there are a number of different satellites on Earth orbit dedicated to aerosol studies. Due to limited information content, the main aerosol products of the most of satellite missions is AOD (Aerosol Optical Depth) while the accuracy of aerosol size and type retrieval from spaceborne remote sensing still requires essential improvement. The combination of measurements from different satellites essentially increases their information content and, therefore, can provide new possibilities for retrieval of extended set of both aerosol and surface properties. A generalized synergetic approach for aerosol and surface characterization from diverse spaceborne measurements was developed on the basis of GRASP (Generalized Retrieval of Atmosphere and Surface Properties) algorithm (SYREMIS/GRASP approach). The concept was applied and tested on two types of synergetic measurements: (i) synergy from polar orbiting satellites (LEO+LEO synergy), (ii) synergy from polar orbiting and geostationary satellites (LEO+GEO synergy). On one hand such synergetic constellation extends the spectral range of the measurements. On the other hand, it provides unprecedented global spatial coverage with high temporal resolution, which is crucial for number of climate studies. In this paper we discuss the physical basis and concept of the LEO+LEO and LEO+GEO synergies used in GRASP retrieval and demonstrate that SYREMIS/GRASP approach allows the transition of information content from the instruments with the richest information content to the instruments with lower one. This results in the substantial enhancements in aerosol and surface characterizations for all instruments from the synergy.
- 29 August 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-32
Open AccessReply on RC4
Atmospheric aerosol is one of the main drivers of climate change. At present time there are a number of different satellites on Earth orbit dedicated to aerosol studies. Due to limited information content, the main aerosol products of the most of satellite missions is AOD (Aerosol Optical Depth) while the accuracy of aerosol size and type retrieval from spaceborne remote sensing still requires essential improvement. The combination of measurements from different satellites essentially increases their information content and, therefore, can provide new possibilities for retrieval of extended set of both aerosol and surface properties. A generalized synergetic approach for aerosol and surface characterization from diverse spaceborne measurements was developed on the basis of GRASP (Generalized Retrieval of Atmosphere and Surface Properties) algorithm (SYREMIS/GRASP approach). The concept was applied and tested on two types of synergetic measurements: (i) synergy from polar orbiting satellites (LEO+LEO synergy), (ii) synergy from polar orbiting and geostationary satellites (LEO+GEO synergy). On one hand such synergetic constellation extends the spectral range of the measurements. On the other hand, it provides unprecedented global spatial coverage with high temporal resolution, which is crucial for number of climate studies. In this paper we discuss the physical basis and concept of the LEO+LEO and LEO+GEO synergies used in GRASP retrieval and demonstrate that SYREMIS/GRASP approach allows the transition of information content from the instruments with the richest information content to the instruments with lower one. This results in the substantial enhancements in aerosol and surface characterizations for all instruments from the synergy.